From: Darius Berghe <darius.berghe@analog.com>
To: <jic23@kernel.org>, <robh@kernel.org>, <krzk+dt@kernel.org>,
<conor+dt@kernel.org>, <corbet@lwn.net>,
<alexandru.tachici@analog.com>, <lars@metafoo.de>,
<Michael.Hennerich@analog.com>
Cc: <linux-iio@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <linux-doc@vger.kernel.org>,
<darius.berghe@analog.com>
Subject: [PATCH v3 1/3] iio: imu: adis16480: add devices to adis16480 driver
Date: Fri, 8 Nov 2024 14:58:12 +0200 [thread overview]
Message-ID: <20241108125814.3097213-2-darius.berghe@analog.com> (raw)
In-Reply-To: <20241108125814.3097213-1-darius.berghe@analog.com>
Add support for adis16486, adis16487 and adis16489 Six Degrees
of Freedom Inertial Sensors into the existing adis16480 iio
subsystem driver.
adis16486 is similar to adis16485, has the exact same channels
but acceleration and delta velocity scales are different.
adis16487 is fallback compatible with adis16485.
adis16489 is similar to adis16488 but lacks the magnetometer
and has a different accelerometer scale.
Signed-off-by: Darius Berghe <darius.berghe@analog.com>
---
drivers/iio/imu/adis16480.c | 75 +++++++++++++++++++++++++++++++++++++
1 file changed, 75 insertions(+)
diff --git a/drivers/iio/imu/adis16480.c b/drivers/iio/imu/adis16480.c
index 294181f2fcb3..569a03598952 100644
--- a/drivers/iio/imu/adis16480.c
+++ b/drivers/iio/imu/adis16480.c
@@ -878,11 +878,32 @@ static const struct iio_chan_spec adis16545_channels[] = {
IIO_CHAN_SOFT_TIMESTAMP(17),
};
+static const struct iio_chan_spec adis16489_channels[] = {
+ ADIS16480_GYRO_CHANNEL(X),
+ ADIS16480_GYRO_CHANNEL(Y),
+ ADIS16480_GYRO_CHANNEL(Z),
+ ADIS16480_ACCEL_CHANNEL(X),
+ ADIS16480_ACCEL_CHANNEL(Y),
+ ADIS16480_ACCEL_CHANNEL(Z),
+ ADIS16480_PRESSURE_CHANNEL(),
+ ADIS16480_TEMP_CHANNEL(),
+ IIO_CHAN_SOFT_TIMESTAMP(8),
+ ADIS16480_DELTANG_CHANNEL_NO_SCAN(X),
+ ADIS16480_DELTANG_CHANNEL_NO_SCAN(Y),
+ ADIS16480_DELTANG_CHANNEL_NO_SCAN(Z),
+ ADIS16480_DELTVEL_CHANNEL_NO_SCAN(X),
+ ADIS16480_DELTVEL_CHANNEL_NO_SCAN(Y),
+ ADIS16480_DELTVEL_CHANNEL_NO_SCAN(Z),
+};
+
enum adis16480_variant {
ADIS16375,
ADIS16480,
ADIS16485,
+ ADIS16486,
+ ADIS16487,
ADIS16488,
+ ADIS16489,
ADIS16490,
ADIS16495_1,
ADIS16495_2,
@@ -1038,6 +1059,38 @@ static const struct adis16480_chip_info adis16480_chip_info[] = {
.filter_freqs = adis16480_def_filter_freqs,
.adis_data = ADIS16480_DATA(16485, &adis16485_timeouts, 0, 0),
},
+ [ADIS16486] = {
+ .channels = adis16485_channels,
+ .num_channels = ARRAY_SIZE(adis16485_channels),
+ .gyro_max_val = 22500 << 16,
+ .gyro_max_scale = IIO_DEGREE_TO_RAD(450),
+ .accel_max_val = IIO_M_S_2_TO_G(20000 << 16),
+ .accel_max_scale = 18,
+ .temp_scale = 5650, /* 5.65 milli degree Celsius */
+ .deltang_max_val = IIO_DEGREE_TO_RAD(720),
+ .deltvel_max_val = 200,
+ .int_clk = 2460000,
+ .max_dec_rate = 2048,
+ .has_sleep_cnt = true,
+ .filter_freqs = adis16480_def_filter_freqs,
+ .adis_data = ADIS16480_DATA(16486, &adis16480_timeouts, 0, 0),
+ },
+ [ADIS16487] = {
+ .channels = adis16485_channels,
+ .num_channels = ARRAY_SIZE(adis16485_channels),
+ .gyro_max_val = 22500 << 16,
+ .gyro_max_scale = IIO_DEGREE_TO_RAD(450),
+ .accel_max_val = IIO_M_S_2_TO_G(20000 << 16),
+ .accel_max_scale = 5,
+ .temp_scale = 5650, /* 5.65 milli degree Celsius */
+ .deltang_max_val = IIO_DEGREE_TO_RAD(720),
+ .deltvel_max_val = 50,
+ .int_clk = 2460000,
+ .max_dec_rate = 2048,
+ .has_sleep_cnt = true,
+ .filter_freqs = adis16480_def_filter_freqs,
+ .adis_data = ADIS16480_DATA(16487, &adis16485_timeouts, 0, 0),
+ },
[ADIS16488] = {
.channels = adis16480_channels,
.num_channels = ARRAY_SIZE(adis16480_channels),
@@ -1054,6 +1107,22 @@ static const struct adis16480_chip_info adis16480_chip_info[] = {
.filter_freqs = adis16480_def_filter_freqs,
.adis_data = ADIS16480_DATA(16488, &adis16485_timeouts, 0, 0),
},
+ [ADIS16489] = {
+ .channels = adis16489_channels,
+ .num_channels = ARRAY_SIZE(adis16489_channels),
+ .gyro_max_val = 22500 << 16,
+ .gyro_max_scale = IIO_DEGREE_TO_RAD(450),
+ .accel_max_val = IIO_M_S_2_TO_G(20000 << 16),
+ .accel_max_scale = 18,
+ .temp_scale = 5650, /* 5.65 milli degree Celsius */
+ .deltang_max_val = IIO_DEGREE_TO_RAD(720),
+ .deltvel_max_val = 200,
+ .int_clk = 2460000,
+ .max_dec_rate = 2048,
+ .has_sleep_cnt = true,
+ .filter_freqs = adis16480_def_filter_freqs,
+ .adis_data = ADIS16480_DATA(16489, &adis16480_timeouts, 0, 0),
+ },
[ADIS16490] = {
.channels = adis16485_channels,
.num_channels = ARRAY_SIZE(adis16485_channels),
@@ -1741,7 +1810,10 @@ static const struct spi_device_id adis16480_ids[] = {
{ "adis16375", ADIS16375 },
{ "adis16480", ADIS16480 },
{ "adis16485", ADIS16485 },
+ { "adis16486", ADIS16486 },
+ { "adis16487", ADIS16487 },
{ "adis16488", ADIS16488 },
+ { "adis16489", ADIS16489 },
{ "adis16490", ADIS16490 },
{ "adis16495-1", ADIS16495_1 },
{ "adis16495-2", ADIS16495_2 },
@@ -1763,7 +1835,10 @@ static const struct of_device_id adis16480_of_match[] = {
{ .compatible = "adi,adis16375" },
{ .compatible = "adi,adis16480" },
{ .compatible = "adi,adis16485" },
+ { .compatible = "adi,adis16486" },
+ { .compatible = "adi,adis16487" },
{ .compatible = "adi,adis16488" },
+ { .compatible = "adi,adis16489" },
{ .compatible = "adi,adis16490" },
{ .compatible = "adi,adis16495-1" },
{ .compatible = "adi,adis16495-2" },
--
2.46.1
next prev parent reply other threads:[~2024-11-08 12:44 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-08 12:58 [PATCH v3 0/3] iio: imu: add devices to adis16480 driver Darius Berghe
2024-11-08 12:58 ` Darius Berghe [this message]
2024-11-08 12:58 ` [PATCH v3 2/3] iio: imu: adis16480: add devices to adis16480 - docs Darius Berghe
2024-11-08 12:58 ` [PATCH v3 3/3] dt-bindings: iio: adis16480: add devices to adis16480 Darius Berghe
2024-11-08 17:43 ` Conor Dooley
2024-11-09 11:22 ` [PATCH v3 0/3] iio: imu: add devices to adis16480 driver Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241108125814.3097213-2-darius.berghe@analog.com \
--to=darius.berghe@analog.com \
--cc=Michael.Hennerich@analog.com \
--cc=alexandru.tachici@analog.com \
--cc=conor+dt@kernel.org \
--cc=corbet@lwn.net \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-doc@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox