[PATCH net-next v5 5/7] bnxt_en: add support for header-data-split-thresh ethtool command

[Taehee Yoo <ap420073@gmail.com>]

The bnxt_en driver has configured the hds_threshold value automatically
when TPA is enabled based on the rx-copybreak default value.
Now the header-data-split-thresh ethtool command is added, so it adds an
implementation of header-data-split-thresh option.

Configuration of the header-data-split-thresh is allowed only when
the header-data-split is enabled. The default value of
header-data-split-thresh is 256, which is the default value of
rx-copybreak, which used to be the hds_thresh value.

   # Example:
   # ethtool -G enp14s0f0np0 tcp-data-split on header-data-split-thresh 256
   # ethtool -g enp14s0f0np0
   Ring parameters for enp14s0f0np0:
   Pre-set maximums:
   ...
   Header data split thresh:  256
   Current hardware settings:
   ...
   TCP data split:         on
   Header data split thresh:  256

Tested-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
---

v5:
 - No changes.

v4:
 - Reduce hole in struct bnxt.
 - Add ETHTOOL_RING_USE_HDS_THRS to indicate bnxt_en driver support
   header-data-split-thresh option.
 - Add Test tag from Stanislav.

v3:
 - Drop validation logic tcp-data-split and tcp-data-split-thresh.

v2:
 - Patch added.

 drivers/net/ethernet/broadcom/bnxt/bnxt.c         | 3 ++-
 drivers/net/ethernet/broadcom/bnxt/bnxt.h         | 2 ++
 drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 7 ++++++-
 3 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 608bcca71676..27d6bac3a69a 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -4454,6 +4454,7 @@ void bnxt_set_tpa_flags(struct bnxt *bp)
 static void bnxt_init_ring_params(struct bnxt *bp)
 {
 	bp->rx_copybreak = BNXT_DEFAULT_RX_COPYBREAK;
+	bp->hds_threshold = BNXT_DEFAULT_RX_COPYBREAK;
 }
 
 /* bp->rx_ring_size, bp->tx_ring_size, dev->mtu, BNXT_FLAG_{G|L}RO flags must
@@ -6429,7 +6430,7 @@ static int bnxt_hwrm_vnic_set_hds(struct bnxt *bp, struct bnxt_vnic_info *vnic)
 					  VNIC_PLCMODES_CFG_REQ_FLAGS_HDS_IPV6);
 		req->enables |=
 			cpu_to_le32(VNIC_PLCMODES_CFG_REQ_ENABLES_HDS_THRESHOLD_VALID);
-		req->hds_threshold = cpu_to_le16(bp->rx_copybreak);
+		req->hds_threshold = cpu_to_le16(bp->hds_threshold);
 	}
 	req->vnic_id = cpu_to_le32(vnic->fw_vnic_id);
 	return hwrm_req_send(bp, req);
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
index 3a7d2f3ebb2a..058db26fb255 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
@@ -2362,6 +2362,8 @@ struct bnxt {
 	u8			q_ids[BNXT_MAX_QUEUE];
 	u8			max_q;
 	u8			num_tc;
+#define BNXT_HDS_THRESHOLD_MAX	256
+	u16			hds_threshold;
 
 	unsigned int		current_interval;
 #define BNXT_TIMER_INTERVAL	HZ
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
index b0054eef389b..a51a4cedecb9 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
@@ -833,6 +833,9 @@ static void bnxt_get_ringparam(struct net_device *dev,
 	ering->rx_pending = bp->rx_ring_size;
 	ering->rx_jumbo_pending = bp->rx_agg_ring_size;
 	ering->tx_pending = bp->tx_ring_size;
+
+	kernel_ering->hds_thresh = bp->hds_threshold;
+	kernel_ering->hds_thresh_max = BNXT_HDS_THRESHOLD_MAX;
 }
 
 static int bnxt_set_ringparam(struct net_device *dev,
@@ -868,6 +871,7 @@ static int bnxt_set_ringparam(struct net_device *dev,
 	else if (tcp_data_split == ETHTOOL_TCP_DATA_SPLIT_UNKNOWN)
 		bp->flags &= ~BNXT_FLAG_HDS;
 
+	bp->hds_threshold = (u16)kernel_ering->hds_thresh;
 	bp->rx_ring_size = ering->rx_pending;
 	bp->tx_ring_size = ering->tx_pending;
 	bnxt_set_ring_params(bp);
@@ -5363,7 +5367,8 @@ const struct ethtool_ops bnxt_ethtool_ops = {
 				     ETHTOOL_COALESCE_STATS_BLOCK_USECS |
 				     ETHTOOL_COALESCE_USE_ADAPTIVE_RX |
 				     ETHTOOL_COALESCE_USE_CQE,
-	.supported_ring_params	= ETHTOOL_RING_USE_TCP_DATA_SPLIT,
+	.supported_ring_params	= ETHTOOL_RING_USE_TCP_DATA_SPLIT |
+				  ETHTOOL_RING_USE_HDS_THRS,
 	.get_link_ksettings	= bnxt_get_link_ksettings,
 	.set_link_ksettings	= bnxt_set_link_ksettings,
 	.get_fec_stats		= bnxt_get_fec_stats,
-- 
2.34.1