Re: [PATCH v9 1/3] Documentation:leds: Add leds-st1202.rst

[Lee Jones <lee@kernel.org>]

On Thu, 21 Nov 2024, Vicentiu Galanopulo wrote:

> Add usage for sysfs hw_pattern entry for leds-st1202
> 
> Signed-off-by: Vicentiu Galanopulo <vicentiu.galanopulo@remote-tech.co.uk>
> ---
>  - Changes in v3: Add leds-st1202 to index.rst
>  - Changes in v2: Implement review comments
> 
>  Documentation/leds/index.rst       |  1 +
>  Documentation/leds/leds-st1202.rst | 36 ++++++++++++++++++++++++++++++
>  2 files changed, 37 insertions(+)
>  create mode 100644 Documentation/leds/leds-st1202.rst
> 
> diff --git a/Documentation/leds/index.rst b/Documentation/leds/index.rst
> index 3ade16c18328..0ab0a2128a11 100644
> --- a/Documentation/leds/index.rst
> +++ b/Documentation/leds/index.rst
> @@ -28,4 +28,5 @@ LEDs
>     leds-mlxcpld
>     leds-mt6370-rgb
>     leds-sc27xx
> +   leds-st1202.rst
>     leds-qcom-lpg
> diff --git a/Documentation/leds/leds-st1202.rst b/Documentation/leds/leds-st1202.rst
> new file mode 100644
> index 000000000000..e647966e496c
> --- /dev/null
> +++ b/Documentation/leds/leds-st1202.rst
> @@ -0,0 +1,36 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +============================================
> +Kernel driver for STMicroelectronics LED1202
> +============================================
> +
> +/sys/class/leds/<led>/hw_pattern
> +--------------------------------
> +
> +Specify a hardware pattern for the ST1202 LED. The LED
> +controller implements 12 low-side current generators
> +with independent dimming control. Internal volatile memory
> +allows the user to store up to 8 different patterns.
> +Each pattern is a particular output configuration in terms
> +of PWM duty-cycle and duration (ms).
> +
> +To be compatible with the hardware pattern
> +format, maximum 8 tuples of brightness (PWM) and duration must
> +be written to hw_pattern.

Some very odd formatting here.

Doesn't your editor do line-wrapping for you?

> +
> +- Min pattern duration: 22 ms
> +- Max pattern duration: 5660 ms
> +
> +The format of the hardware pattern values should be:
> +"brightness duration brightness duration ..."
> +
> +/sys/class/leds/<led>/repeat
> +----------------------------
> +
> +Specify a pattern repeat number, which is common for all channels.
> +Default is 1; negative numbers and 0 are invalid.
> +
> +This file will always return the originally written repeat number.
> +
> +When the 255 value is written to it, all patterns will repeat
> +indefinitely.
> -- 
> 2.39.3 (Apple Git-145)
> 

-- 
Lee Jones [李琼斯]