From: Robert Budai <robert.budai@analog.com>
To: Lars-Peter Clausen <lars@metafoo.de>,
Michael Hennerich <Michael.Hennerich@analog.com>,
Alexandru Ardelean <alexandru.ardelean@analog.com>,
Jonathan Cameron <jic23@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Jonathan Corbet <corbet@lwn.net>, Nuno Sa <nuno.sa@analog.com>,
Ramona Gradinariu <ramona.gradinariu@analog.com>,
Trevor Gamblin <tgamblin@baylibre.com>,
Marcelo Schmitt <marcelo.schmitt@analog.com>,
Paul Cercueil <paul@crapouillou.net>,
David Lechner <dlechner@baylibre.com>,
Antoniu Miclaus <antoniu.miclaus@analog.com>,
Robert Budai <robert.budai@analog.com>,
<linux-iio@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <linux-doc@vger.kernel.org>
Subject: [PATCH v6 3/6] iio: imu: adis: Add DIAG_STAT register
Date: Tue, 4 Feb 2025 16:36:07 +0200 [thread overview]
Message-ID: <20250204143612.85939-4-robert.budai@analog.com> (raw)
In-Reply-To: <20250204143612.85939-1-robert.budai@analog.com>
Some devices may have more than 16 bits of status. This patch allows the user
to specify the size of the DIAG_STAT register. It defaults to 2 if not
specified. This is mainly for backward compatibility.
Co-developed-by: Ramona Gradinariu <ramona.gradinariu@analog.com>
Signed-off-by: Ramona Gradinariu <ramona.gradinariu@analog.com>
Co-developed-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Robert Budai <robert.budai@analog.com>
---
v6:
- commit message wrapped at 75 characters
- added local variable for status register
- applied suggestion for diag_stat_size description
drivers/iio/imu/adis.c | 19 ++++++++++++++++---
include/linux/iio/imu/adis.h | 3 +++
2 files changed, 19 insertions(+), 3 deletions(-)
diff --git a/drivers/iio/imu/adis.c b/drivers/iio/imu/adis.c
index 84344f052fb7..b3f074116e9d 100644
--- a/drivers/iio/imu/adis.c
+++ b/drivers/iio/imu/adis.c
@@ -304,11 +304,21 @@ EXPORT_SYMBOL_NS(__adis_enable_irq, "IIO_ADISLIB");
*/
int __adis_check_status(struct adis *adis)
{
- u16 status;
+ unsigned int status;
+ int diag_stat_bits;
+ u16 status_16;
int ret;
int i;
- ret = __adis_read_reg_16(adis, adis->data->diag_stat_reg, &status);
+ if (adis->data->diag_stat_size)
+ ret = adis->ops->read(adis, adis->data->diag_stat_reg, &status,
+ adis->data->diag_stat_size);
+ else
+ {
+ ret = __adis_read_reg_16(adis, adis->data->diag_stat_reg,
+ status_16);
+ status = status_16;
+ }
if (ret)
return ret;
@@ -317,7 +327,10 @@ int __adis_check_status(struct adis *adis)
if (status == 0)
return 0;
- for (i = 0; i < 16; ++i) {
+ diag_stat_bits = BITS_PER_BYTE * (adis->data->diag_stat_size ?
+ adis->data->diag_stat_size : 2);
+
+ for (i = 0; i < diag_stat_bits; ++i) {
if (status & BIT(i)) {
dev_err(&adis->spi->dev, "%s.\n",
adis->data->status_error_msgs[i]);
diff --git a/include/linux/iio/imu/adis.h b/include/linux/iio/imu/adis.h
index 13beb6a7317b..dd2f47f5a75f 100644
--- a/include/linux/iio/imu/adis.h
+++ b/include/linux/iio/imu/adis.h
@@ -44,6 +44,8 @@ struct adis_timeout {
* @glob_cmd_reg: Register address of the GLOB_CMD register
* @msc_ctrl_reg: Register address of the MSC_CTRL register
* @diag_stat_reg: Register address of the DIAG_STAT register
+ * @diag_stat_size: Length (in bytes) of the DIAG_STAT register. If 0 the
+ * default length is 2 bytes long.
* @prod_id_reg: Register address of the PROD_ID register
* @prod_id: Product ID code that should be expected when reading @prod_id_reg
* @self_test_mask: Bitmask of supported self-test operations
@@ -70,6 +72,7 @@ struct adis_data {
unsigned int glob_cmd_reg;
unsigned int msc_ctrl_reg;
unsigned int diag_stat_reg;
+ unsigned int diag_stat_size;
unsigned int prod_id_reg;
unsigned int prod_id;
--
2.39.5
next prev parent reply other threads:[~2025-02-04 16:38 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-04 14:36 [PATCH v6 0/6] Add support for ADIS16550 Robert Budai
2025-02-04 14:36 ` [PATCH v6 1/6] iio: imu: adis: Add custom ops struct Robert Budai
2025-02-04 14:36 ` [PATCH v6 2/6] iio: imu: adis: Add reset to custom ops Robert Budai
2025-02-04 14:36 ` Robert Budai [this message]
2025-02-04 14:36 ` [PATCH v6 4/6] dt-bindings: iio: Add adis16550 bindings Robert Budai
2025-02-04 19:25 ` Conor Dooley
2025-02-05 16:11 ` Nuno Sá
2025-02-05 19:52 ` Conor Dooley
2025-02-08 15:38 ` Jonathan Cameron
2025-02-11 10:01 ` Nuno Sá
2025-02-04 14:36 ` [PATCH v6 5/6] iio: imu: adis16550: add adis16550 support Robert Budai
2025-02-08 15:37 ` Jonathan Cameron
2025-02-04 14:36 ` [PATCH v6 6/6] docs: iio: add documentation for adis16550 driver Robert Budai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250204143612.85939-4-robert.budai@analog.com \
--to=robert.budai@analog.com \
--cc=Michael.Hennerich@analog.com \
--cc=alexandru.ardelean@analog.com \
--cc=antoniu.miclaus@analog.com \
--cc=conor+dt@kernel.org \
--cc=corbet@lwn.net \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=jic23@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lars@metafoo.de \
--cc=linux-doc@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcelo.schmitt@analog.com \
--cc=nuno.sa@analog.com \
--cc=paul@crapouillou.net \
--cc=ramona.gradinariu@analog.com \
--cc=robh+dt@kernel.org \
--cc=tgamblin@baylibre.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox