[PATCH v2 0/2] Add support for ADPM12160 a DC/DC Power Module

[PATCH v2 0/2] Add support for ADPM12160 a DC/DC Power Module

[Alexis Czezar Torreno]

Before adding the support for ADPM12160, this series includes a commit
to fix the issue with max34451. The family of max344** contains switched
PMBUS addresses 0x46 and 0x4A. For max34451, the version MAX34451ETNA6+
and later fixed this issue and this first commit supports this. The
MFR_REVISION is used to differentiate the different max34451 chips.

The second commit adds the actual driver for adpm12160. ASPM12160 is a
quarter brick DC/DC Power Module. It is a high power non-isolated
converter capable of delivering a fully regulated 12V, with continuous
power level of 1600W with peak power at 2400W for a limited time.
Uses PMBus Configuration.

Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
---
Changes in v2:
- Commit 1: MAX34451 Fix
-   Added a flag to denote if the device has correct pmbus address
-   Stored the pmbus address of concern inside max34440_data
-   Removed separate chip ID for max344451etna6+, detects this version
    via MFR_REVISION
-   Reverted max34440.rst to original. No edit deemed necessary
-   Supported READ_VIN, READ_IIN, and STATUS_INPUT for max34451etna6+
- Commit 2: Add ADPM12160
-   Adjusted code to base it on the new max34440.c
- Link to v1: https://lore.kernel.org/r/20250320-dev_adpm12160-v1-0-8f7b975eac75@analog.com

---
Alexis Czezar Torreno (2):
      hwmon: (pmbus/max34440): Fix support for max34451
      hwmon: (pmbus/max3440): add support adpm12160

 Documentation/hwmon/max34440.rst |  30 ++++++++---
 drivers/hwmon/pmbus/max34440.c   | 109 ++++++++++++++++++++++++++++++++++++---
 2 files changed, 124 insertions(+), 15 deletions(-)
---
base-commit: c812cc42f92d3d0b17c01b5db9a1dee5793a1491
change-id: 20250320-dev_adpm12160-5960e77a79be

Best regards,
-- 
Alexis Czezar Torreno <alexisczezar.torreno@analog.com>

[PATCH v2 1/2] hwmon: (pmbus/max34440): Fix support for max34451

[Alexis Czezar Torreno]

The max344** family has an issue with some PMBUS address being switched.
This includes max34451 however version MAX34451-NA6 and later has this
issue fixed and this commit supports that update.

Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
---
 drivers/hwmon/pmbus/max34440.c | 55 +++++++++++++++++++++++++++++++++++++++---
 1 file changed, 51 insertions(+), 4 deletions(-)

diff --git a/drivers/hwmon/pmbus/max34440.c b/drivers/hwmon/pmbus/max34440.c
index c9dda33831ff24e7b5e2fd1956a65e6bd2bfcbb9..585746806663409bc97042647f6c0aba4c6f520a 100644
--- a/drivers/hwmon/pmbus/max34440.c
+++ b/drivers/hwmon/pmbus/max34440.c
@@ -34,16 +34,22 @@ enum chips { max34440, max34441, max34446, max34451, max34460, max34461 };
 /*
  * The whole max344* family have IOUT_OC_WARN_LIMIT and IOUT_OC_FAULT_LIMIT
  * swapped from the standard pmbus spec addresses.
+ * For max34451, version MAX34451ETNA6+ and later has this issue fixed.
  */
 #define MAX34440_IOUT_OC_WARN_LIMIT	0x46
 #define MAX34440_IOUT_OC_FAULT_LIMIT	0x4A
 
+#define MAX34451ETNA6_MFR_REV		0x0012
+
 #define MAX34451_MFR_CHANNEL_CONFIG	0xe4
 #define MAX34451_MFR_CHANNEL_CONFIG_SEL_MASK	0x3f
 
 struct max34440_data {
 	int id;
 	struct pmbus_driver_info info;
+	bool pmbus_addr_fixed;
+	u32 iout_oc_warn_limit;
+	u32 iout_oc_fault_limit;
 };
 
 #define to_max34440_data(x)  container_of(x, struct max34440_data, info)
@@ -60,11 +66,11 @@ static int max34440_read_word_data(struct i2c_client *client, int page,
 	switch (reg) {
 	case PMBUS_IOUT_OC_FAULT_LIMIT:
 		ret = pmbus_read_word_data(client, page, phase,
-					   MAX34440_IOUT_OC_FAULT_LIMIT);
+					   data->iout_oc_fault_limit);
 		break;
 	case PMBUS_IOUT_OC_WARN_LIMIT:
 		ret = pmbus_read_word_data(client, page, phase,
-					   MAX34440_IOUT_OC_WARN_LIMIT);
+					   data->iout_oc_warn_limit);
 		break;
 	case PMBUS_VIRT_READ_VOUT_MIN:
 		ret = pmbus_read_word_data(client, page, phase,
@@ -133,11 +139,11 @@ static int max34440_write_word_data(struct i2c_client *client, int page,
 
 	switch (reg) {
 	case PMBUS_IOUT_OC_FAULT_LIMIT:
-		ret = pmbus_write_word_data(client, page, MAX34440_IOUT_OC_FAULT_LIMIT,
+		ret = pmbus_write_word_data(client, page, data->iout_oc_fault_limit,
 					    word);
 		break;
 	case PMBUS_IOUT_OC_WARN_LIMIT:
-		ret = pmbus_write_word_data(client, page, MAX34440_IOUT_OC_WARN_LIMIT,
+		ret = pmbus_write_word_data(client, page, data->iout_oc_warn_limit,
 					    word);
 		break;
 	case PMBUS_VIRT_RESET_POUT_HISTORY:
@@ -235,6 +241,24 @@ static int max34451_set_supported_funcs(struct i2c_client *client,
 	 */
 
 	int page, rv;
+	bool max34451_na6 = false;
+
+	rv = i2c_smbus_read_word_data(client, PMBUS_MFR_REVISION);
+	if (rv < 0)
+		return rv;
+
+	if (rv == MAX34451ETNA6_MFR_REV) {
+		max34451_na6 = true;
+		data->pmbus_addr_fixed = true;
+		data->info.format[PSC_VOLTAGE_IN] = direct;
+		data->info.format[PSC_CURRENT_IN] = direct;
+		data->info.m[PSC_VOLTAGE_IN] = 1;
+		data->info.b[PSC_VOLTAGE_IN] = 0;
+		data->info.R[PSC_VOLTAGE_IN] = 3;
+		data->info.m[PSC_CURRENT_IN] = 1;
+		data->info.b[PSC_CURRENT_IN] = 0;
+		data->info.R[PSC_CURRENT_IN] = 2;
+	}
 
 	for (page = 0; page < 16; page++) {
 		rv = i2c_smbus_write_byte_data(client, PMBUS_PAGE, page);
@@ -251,16 +275,30 @@ static int max34451_set_supported_funcs(struct i2c_client *client,
 		case 0x20:
 			data->info.func[page] = PMBUS_HAVE_VOUT |
 				PMBUS_HAVE_STATUS_VOUT;
+
+			if (max34451_na6)
+				data->info.func[page] |= PMBUS_HAVE_VIN |
+					PMBUS_HAVE_STATUS_INPUT;
 			break;
 		case 0x21:
 			data->info.func[page] = PMBUS_HAVE_VOUT;
+
+			if (max34451_na6)
+				data->info.func[page] |= PMBUS_HAVE_VIN;
 			break;
 		case 0x22:
 			data->info.func[page] = PMBUS_HAVE_IOUT |
 				PMBUS_HAVE_STATUS_IOUT;
+
+			if (max34451_na6)
+				data->info.func[page] |= PMBUS_HAVE_IIN |
+					PMBUS_HAVE_STATUS_INPUT;
 			break;
 		case 0x23:
 			data->info.func[page] = PMBUS_HAVE_IOUT;
+
+			if (max34451_na6)
+				data->info.func[page] |= PMBUS_HAVE_IIN;
 			break;
 		default:
 			break;
@@ -494,6 +532,7 @@ static int max34440_probe(struct i2c_client *client)
 		return -ENOMEM;
 	data->id = i2c_match_id(max34440_id, client)->driver_data;
 	data->info = max34440_info[data->id];
+	data->pmbus_addr_fixed = false;
 
 	if (data->id == max34451) {
 		rv = max34451_set_supported_funcs(client, data);
@@ -501,6 +540,14 @@ static int max34440_probe(struct i2c_client *client)
 			return rv;
 	}
 
+	if (data->pmbus_addr_fixed) {
+		data->iout_oc_fault_limit = PMBUS_IOUT_OC_FAULT_LIMIT;
+		data->iout_oc_warn_limit = PMBUS_IOUT_OC_WARN_LIMIT;
+	} else {
+		data->iout_oc_fault_limit = MAX34440_IOUT_OC_FAULT_LIMIT;
+		data->iout_oc_warn_limit = MAX34440_IOUT_OC_WARN_LIMIT;
+	}
+
 	return pmbus_do_probe(client, &data->info);
 }
 

-- 
2.34.1

Re: [PATCH v2 1/2] hwmon: (pmbus/max34440): Fix support for max34451

[Guenter Roeck]

On Thu, Apr 03, 2025 at 01:16:18PM +0800, Alexis Czezar Torreno wrote:
> The max344** family has an issue with some PMBUS address being switched.
> This includes max34451 however version MAX34451-NA6 and later has this
> issue fixed and this commit supports that update.
> 
> Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
> ---
>  drivers/hwmon/pmbus/max34440.c | 55 +++++++++++++++++++++++++++++++++++++++---
>  1 file changed, 51 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/hwmon/pmbus/max34440.c b/drivers/hwmon/pmbus/max34440.c
> index c9dda33831ff24e7b5e2fd1956a65e6bd2bfcbb9..585746806663409bc97042647f6c0aba4c6f520a 100644
> --- a/drivers/hwmon/pmbus/max34440.c
> +++ b/drivers/hwmon/pmbus/max34440.c
> @@ -34,16 +34,22 @@ enum chips { max34440, max34441, max34446, max34451, max34460, max34461 };
>  /*
>   * The whole max344* family have IOUT_OC_WARN_LIMIT and IOUT_OC_FAULT_LIMIT
>   * swapped from the standard pmbus spec addresses.
> + * For max34451, version MAX34451ETNA6+ and later has this issue fixed.
>   */
>  #define MAX34440_IOUT_OC_WARN_LIMIT	0x46
>  #define MAX34440_IOUT_OC_FAULT_LIMIT	0x4A
>  
> +#define MAX34451ETNA6_MFR_REV		0x0012
> +
>  #define MAX34451_MFR_CHANNEL_CONFIG	0xe4
>  #define MAX34451_MFR_CHANNEL_CONFIG_SEL_MASK	0x3f
>  
>  struct max34440_data {
>  	int id;
>  	struct pmbus_driver_info info;
> +	bool pmbus_addr_fixed;

Unnecessary. See below.

> +	u32 iout_oc_warn_limit;
> +	u32 iout_oc_fault_limit;

u8 would be sufficient.

>  };
>  
>  #define to_max34440_data(x)  container_of(x, struct max34440_data, info)
> @@ -60,11 +66,11 @@ static int max34440_read_word_data(struct i2c_client *client, int page,
>  	switch (reg) {
>  	case PMBUS_IOUT_OC_FAULT_LIMIT:
>  		ret = pmbus_read_word_data(client, page, phase,
> -					   MAX34440_IOUT_OC_FAULT_LIMIT);
> +					   data->iout_oc_fault_limit);
>  		break;
>  	case PMBUS_IOUT_OC_WARN_LIMIT:
>  		ret = pmbus_read_word_data(client, page, phase,
> -					   MAX34440_IOUT_OC_WARN_LIMIT);
> +					   data->iout_oc_warn_limit);
>  		break;
>  	case PMBUS_VIRT_READ_VOUT_MIN:
>  		ret = pmbus_read_word_data(client, page, phase,
> @@ -133,11 +139,11 @@ static int max34440_write_word_data(struct i2c_client *client, int page,
>  
>  	switch (reg) {
>  	case PMBUS_IOUT_OC_FAULT_LIMIT:
> -		ret = pmbus_write_word_data(client, page, MAX34440_IOUT_OC_FAULT_LIMIT,
> +		ret = pmbus_write_word_data(client, page, data->iout_oc_fault_limit,
>  					    word);
>  		break;
>  	case PMBUS_IOUT_OC_WARN_LIMIT:
> -		ret = pmbus_write_word_data(client, page, MAX34440_IOUT_OC_WARN_LIMIT,
> +		ret = pmbus_write_word_data(client, page, data->iout_oc_warn_limit,
>  					    word);
>  		break;
>  	case PMBUS_VIRT_RESET_POUT_HISTORY:
> @@ -235,6 +241,24 @@ static int max34451_set_supported_funcs(struct i2c_client *client,
>  	 */
>  
>  	int page, rv;
> +	bool max34451_na6 = false;
> +
> +	rv = i2c_smbus_read_word_data(client, PMBUS_MFR_REVISION);
> +	if (rv < 0)
> +		return rv;
> +
> +	if (rv == MAX34451ETNA6_MFR_REV) {

Sure that this is only one revision ?
Would it be better to use ">=" instead of "==" ?

> +		max34451_na6 = true;
> +		data->pmbus_addr_fixed = true;
> +		data->info.format[PSC_VOLTAGE_IN] = direct;
> +		data->info.format[PSC_CURRENT_IN] = direct;
> +		data->info.m[PSC_VOLTAGE_IN] = 1;
> +		data->info.b[PSC_VOLTAGE_IN] = 0;
> +		data->info.R[PSC_VOLTAGE_IN] = 3;
> +		data->info.m[PSC_CURRENT_IN] = 1;
> +		data->info.b[PSC_CURRENT_IN] = 0;
> +		data->info.R[PSC_CURRENT_IN] = 2;

Assign register addresses directly here.

		data->iout_oc_fault_limit = PMBUS_IOUT_OC_FAULT_LIMIT;
		data->iout_oc_warn_limit = PMBUS_IOUT_OC_WARN_LIMIT;
	} else {
		data->iout_oc_fault_limit = MAX34440_IOUT_OC_FAULT_LIMIT;
		data->iout_oc_warn_limit = MAX34440_IOUT_OC_WARN_LIMIT;

> +	}

Thanks,
Guenter

RE: [PATCH v2 1/2] hwmon: (pmbus/max34440): Fix support for max34451

[Torreno, Alexis Czezar]

> -----Original Message-----
> From: Guenter Roeck <groeck7@gmail.com> On Behalf Of Guenter Roeck
> Sent: Friday, April 4, 2025 12:33 AM
> To: Torreno, Alexis Czezar <AlexisCzezar.Torreno@analog.com>
> Cc: Jean Delvare <jdelvare@suse.com>; Jonathan Corbet <corbet@lwn.net>;
> Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>; linux-
> hwmon@vger.kernel.org; linux-doc@vger.kernel.org; linux-
> kernel@vger.kernel.org; linux-i2c@vger.kernel.org
> Subject: Re: [PATCH v2 1/2] hwmon: (pmbus/max34440): Fix support for
> max34451
> 
> [External]
> 
> On Thu, Apr 03, 2025 at 01:16:18PM +0800, Alexis Czezar Torreno wrote:
> > The max344** family has an issue with some PMBUS address being switched.
> > This includes max34451 however version MAX34451-NA6 and later has this
> > issue fixed and this commit supports that update.
> >
> > Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
> > ---
> >  drivers/hwmon/pmbus/max34440.c | 55
> > +++++++++++++++++++++++++++++++++++++++---
> >  1 file changed, 51 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/hwmon/pmbus/max34440.c
> > b/drivers/hwmon/pmbus/max34440.c index
> >
> c9dda33831ff24e7b5e2fd1956a65e6bd2bfcbb9..585746806663409bc970426
> 47f6c
> > 0aba4c6f520a 100644
> > --- a/drivers/hwmon/pmbus/max34440.c
> > +++ b/drivers/hwmon/pmbus/max34440.c
> > @@ -34,16 +34,22 @@ enum chips { max34440, max34441, max34446,
> > max34451, max34460, max34461 };
> >  /*
> >   * The whole max344* family have IOUT_OC_WARN_LIMIT and
> IOUT_OC_FAULT_LIMIT
> >   * swapped from the standard pmbus spec addresses.
> > + * For max34451, version MAX34451ETNA6+ and later has this issue fixed.
> >   */
> >  #define MAX34440_IOUT_OC_WARN_LIMIT	0x46
> >  #define MAX34440_IOUT_OC_FAULT_LIMIT	0x4A
> >
> > +#define MAX34451ETNA6_MFR_REV		0x0012
> > +
> >  #define MAX34451_MFR_CHANNEL_CONFIG	0xe4
> >  #define MAX34451_MFR_CHANNEL_CONFIG_SEL_MASK	0x3f
> >
> >  struct max34440_data {
> >  	int id;
> >  	struct pmbus_driver_info info;
> > +	bool pmbus_addr_fixed;
> 
> Unnecessary. See below.
> 
> > +	u32 iout_oc_warn_limit;
> > +	u32 iout_oc_fault_limit;
> 
> u8 would be sufficient.

Will change

> 
> >  };
> >
> >  #define to_max34440_data(x)  container_of(x, struct max34440_data,
> > info) @@ -60,11 +66,11 @@ static int max34440_read_word_data(struct
> i2c_client *client, int page,
> >  	switch (reg) {
> >  	case PMBUS_IOUT_OC_FAULT_LIMIT:
> >  		ret = pmbus_read_word_data(client, page, phase,
> > -
> MAX34440_IOUT_OC_FAULT_LIMIT);
> > +					   data->iout_oc_fault_limit);
> >  		break;
> >  	case PMBUS_IOUT_OC_WARN_LIMIT:
> >  		ret = pmbus_read_word_data(client, page, phase,
> > -
> MAX34440_IOUT_OC_WARN_LIMIT);
> > +					   data->iout_oc_warn_limit);
> >  		break;
> >  	case PMBUS_VIRT_READ_VOUT_MIN:
> >  		ret = pmbus_read_word_data(client, page, phase, @@ -133,11
> +139,11
> > @@ static int max34440_write_word_data(struct i2c_client *client, int
> > page,
> >
> >  	switch (reg) {
> >  	case PMBUS_IOUT_OC_FAULT_LIMIT:
> > -		ret = pmbus_write_word_data(client, page,
> MAX34440_IOUT_OC_FAULT_LIMIT,
> > +		ret = pmbus_write_word_data(client, page,
> > +data->iout_oc_fault_limit,
> >  					    word);
> >  		break;
> >  	case PMBUS_IOUT_OC_WARN_LIMIT:
> > -		ret = pmbus_write_word_data(client, page,
> MAX34440_IOUT_OC_WARN_LIMIT,
> > +		ret = pmbus_write_word_data(client, page, data-
> >iout_oc_warn_limit,
> >  					    word);
> >  		break;
> >  	case PMBUS_VIRT_RESET_POUT_HISTORY:
> > @@ -235,6 +241,24 @@ static int max34451_set_supported_funcs(struct
> i2c_client *client,
> >  	 */
> >
> >  	int page, rv;
> > +	bool max34451_na6 = false;
> > +
> > +	rv = i2c_smbus_read_word_data(client, PMBUS_MFR_REVISION);
> > +	if (rv < 0)
> > +		return rv;
> > +
> > +	if (rv == MAX34451ETNA6_MFR_REV) {
> 
> Sure that this is only one revision ?
> Would it be better to use ">=" instead of "==" ?

Currently yes this is the only revision and the latest
It is nice to future proof this just in case so will change to >=

> 
> > +		max34451_na6 = true;
> > +		data->pmbus_addr_fixed = true;
> > +		data->info.format[PSC_VOLTAGE_IN] = direct;
> > +		data->info.format[PSC_CURRENT_IN] = direct;
> > +		data->info.m[PSC_VOLTAGE_IN] = 1;
> > +		data->info.b[PSC_VOLTAGE_IN] = 0;
> > +		data->info.R[PSC_VOLTAGE_IN] = 3;
> > +		data->info.m[PSC_CURRENT_IN] = 1;
> > +		data->info.b[PSC_CURRENT_IN] = 0;
> > +		data->info.R[PSC_CURRENT_IN] = 2;
> 
> Assign register addresses directly here.

Ah I see, will move.

Thanks!

> 
> 		data->iout_oc_fault_limit = PMBUS_IOUT_OC_FAULT_LIMIT;
> 		data->iout_oc_warn_limit = PMBUS_IOUT_OC_WARN_LIMIT;
> 	} else {
> 		data->iout_oc_fault_limit =
> MAX34440_IOUT_OC_FAULT_LIMIT;
> 		data->iout_oc_warn_limit =
> MAX34440_IOUT_OC_WARN_LIMIT;
> 
> > +	}
> 
> Thanks,
> Guenter

[PATCH v2 2/2] hwmon: (pmbus/max3440): add support adpm12160

[Alexis Czezar Torreno]

ASPM12160 is a quarter brick DC/DC Power Module. It is a high
power non-isolated converter capable of delivering a fully
regulated 12V, with continuous power level of 1600W with peak
power at 2400W for a limited time. Uses PMBus Configuration.

Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
---
 Documentation/hwmon/max34440.rst | 30 ++++++++++++++++------
 drivers/hwmon/pmbus/max34440.c   | 54 +++++++++++++++++++++++++++++++++++++---
 2 files changed, 73 insertions(+), 11 deletions(-)

diff --git a/Documentation/hwmon/max34440.rst b/Documentation/hwmon/max34440.rst
index 162d289f08140341e8e76ab7033834ba07a8b935..8591a7152ce580a04b6965301f9bacd9b0a1a661 100644
--- a/Documentation/hwmon/max34440.rst
+++ b/Documentation/hwmon/max34440.rst
@@ -3,6 +3,14 @@ Kernel driver max34440
 
 Supported chips:
 
+  * ADI ADPM12160
+
+    Prefixes: 'adpm12160'
+
+    Addresses scanned: -
+
+    Datasheet: -
+
   * Maxim MAX34440
 
     Prefixes: 'max34440'
@@ -67,13 +75,14 @@ Author: Guenter Roeck <linux@roeck-us.net>
 Description
 -----------
 
-This driver supports hardware monitoring for Maxim MAX34440 PMBus 6-Channel
-Power-Supply Manager, MAX34441 PMBus 5-Channel Power-Supply Manager
-and Intelligent Fan Controller, and MAX34446 PMBus Power-Supply Data Logger.
-It also supports the MAX34451, MAX34460, and MAX34461 PMBus Voltage Monitor &
-Sequencers. The MAX34451 supports monitoring voltage or current of 12 channels
-based on GIN pins. The MAX34460 supports 12 voltage channels, and the MAX34461
-supports 16 voltage channels.
+This driver supports multiple devices: hardware monitoring for Maxim MAX34440
+PMBus 6-Channel Power-Supply Manager, MAX34441 PMBus 5-Channel Power-Supply
+Manager and Intelligent Fan Controller, and MAX34446 PMBus Power-Supply Data
+Logger; PMBus Voltage Monitor and Sequencers for MAX34451, MAX34460, and
+MAX34461; PMBus DC/DC Power Module ADPM12160. The MAX34451 supports monitoring
+voltage or current of 12 channels based on GIN pins. The MAX34460 supports 12
+voltage channels, and the MAX34461 supports 16 voltage channels. The ADPM1260
+also monitors both input and output of voltage and current.
 
 The driver is a client driver to the core PMBus driver. Please see
 Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
@@ -128,7 +137,10 @@ in[1-6]_highest		Historical maximum voltage.
 in[1-6]_reset_history	Write any value to reset history.
 ======================= =======================================================
 
-.. note:: MAX34446 only supports in[1-4].
+.. note::
+
+    - MAX34446 only supports in[1-4].
+    - ADPM12160 only supports in[1-2]. Label is "vin1" and "vout1" respectively.
 
 Curr
 ~~~~
@@ -150,6 +162,7 @@ curr[1-6]_reset_history	Write any value to reset history.
 
     - in6 and curr6 attributes only exist for MAX34440.
     - MAX34446 only supports curr[1-4].
+    - For ADPM12160, curr[1] is "iin1" and curr[2-6] are "iout[1-5].
 
 Power
 ~~~~~
@@ -185,6 +198,7 @@ temp[1-8]_reset_history	Write any value to reset history.
 .. note::
    - temp7 and temp8 attributes only exist for MAX34440.
    - MAX34446 only supports temp[1-3].
+   - ADPM12160 only supports temp[1].
 
 
 .. note::
diff --git a/drivers/hwmon/pmbus/max34440.c b/drivers/hwmon/pmbus/max34440.c
index 585746806663409bc97042647f6c0aba4c6f520a..2e9c5756fbf3b79f16fe038e8ccf15cfba90d08d 100644
--- a/drivers/hwmon/pmbus/max34440.c
+++ b/drivers/hwmon/pmbus/max34440.c
@@ -14,7 +14,15 @@
 #include <linux/i2c.h>
 #include "pmbus.h"
 
-enum chips { max34440, max34441, max34446, max34451, max34460, max34461 };
+enum chips {
+	adpm12160,
+	max34440,
+	max34441,
+	max34446,
+	max34451,
+	max34460,
+	max34461,
+};
 
 #define MAX34440_MFR_VOUT_PEAK		0xd4
 #define MAX34440_MFR_IOUT_PEAK		0xd5
@@ -81,7 +89,8 @@ static int max34440_read_word_data(struct i2c_client *client, int page,
 					   MAX34440_MFR_VOUT_PEAK);
 		break;
 	case PMBUS_VIRT_READ_IOUT_AVG:
-		if (data->id != max34446 && data->id != max34451)
+		if (data->id != max34446 && data->id != max34451 &&
+		    data->id != adpm12160)
 			return -ENXIO;
 		ret = pmbus_read_word_data(client, page, phase,
 					   MAX34446_MFR_IOUT_AVG);
@@ -165,7 +174,8 @@ static int max34440_write_word_data(struct i2c_client *client, int page,
 	case PMBUS_VIRT_RESET_IOUT_HISTORY:
 		ret = pmbus_write_word_data(client, page,
 					    MAX34440_MFR_IOUT_PEAK, 0);
-		if (!ret && (data->id == max34446 || data->id == max34451))
+		if (!ret && (data->id == max34446 || data->id == max34451 ||
+			     data->id == adpm12160))
 			ret = pmbus_write_word_data(client, page,
 					MAX34446_MFR_IOUT_AVG, 0);
 
@@ -309,6 +319,41 @@ static int max34451_set_supported_funcs(struct i2c_client *client,
 }
 
 static struct pmbus_driver_info max34440_info[] = {
+	[adpm12160] = {
+		.pages = 19,
+		.format[PSC_VOLTAGE_IN] = direct,
+		.format[PSC_VOLTAGE_OUT] = direct,
+		.format[PSC_CURRENT_IN] = direct,
+		.format[PSC_CURRENT_OUT] = direct,
+		.format[PSC_TEMPERATURE] = direct,
+		.m[PSC_VOLTAGE_IN] = 1,
+		.b[PSC_VOLTAGE_IN] = 0,
+		.R[PSC_VOLTAGE_IN] = 0,
+		.m[PSC_VOLTAGE_OUT] = 1,
+		.b[PSC_VOLTAGE_OUT] = 0,
+		.R[PSC_VOLTAGE_OUT] = 0,
+		.m[PSC_CURRENT_IN] = 1,
+		.b[PSC_CURRENT_IN] = 0,
+		.R[PSC_CURRENT_IN] = 2,
+		.m[PSC_CURRENT_OUT] = 1,
+		.b[PSC_CURRENT_OUT] = 0,
+		.R[PSC_CURRENT_OUT] = 2,
+		.m[PSC_TEMPERATURE] = 1,
+		.b[PSC_TEMPERATURE] = 0,
+		.R[PSC_TEMPERATURE] = 2,
+		/* absent func below [18] are not for monitoring */
+		.func[2] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[4] = PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+		.func[5] = PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+		.func[6] = PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+		.func[7] = PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+		.func[8] = PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+		.func[9] = PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT,
+		.func[10] = PMBUS_HAVE_IIN | PMBUS_HAVE_STATUS_INPUT,
+		.func[18] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.read_word_data = max34440_read_word_data,
+		.write_word_data = max34440_write_word_data,
+	},
 	[max34440] = {
 		.pages = 14,
 		.format[PSC_VOLTAGE_IN] = direct,
@@ -538,6 +583,8 @@ static int max34440_probe(struct i2c_client *client)
 		rv = max34451_set_supported_funcs(client, data);
 		if (rv)
 			return rv;
+	} else if (data->id == adpm12160) {
+		data->pmbus_addr_fixed = true;
 	}
 
 	if (data->pmbus_addr_fixed) {
@@ -552,6 +599,7 @@ static int max34440_probe(struct i2c_client *client)
 }
 
 static const struct i2c_device_id max34440_id[] = {
+	{"adpm12160", adpm12160},
 	{"max34440", max34440},
 	{"max34441", max34441},
 	{"max34446", max34446},

-- 
2.34.1