[PATCH v3 2/4] i2c: piix4: Move SB800_PIIX4_FCH_PM_ADDR definition to amd_node.h

[Mario Limonciello <superm1@kernel.org>]

From: Mario Limonciello <mario.limonciello@amd.com>

SB800_PIIX4_FCH_PM_ADDR is used to indicate the base address for the
FCH PM registers.  Multiple drivers may need this base address, so
move it to a common header location and rename accordingly.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
---
 arch/x86/include/asm/amd_node.h |  2 ++
 drivers/i2c/busses/i2c-piix4.c  | 12 ++++++------
 2 files changed, 8 insertions(+), 6 deletions(-)

diff --git a/arch/x86/include/asm/amd_node.h b/arch/x86/include/asm/amd_node.h
index 23fe617898a8f..f4993201834ea 100644
--- a/arch/x86/include/asm/amd_node.h
+++ b/arch/x86/include/asm/amd_node.h
@@ -19,6 +19,8 @@
 
 #include <linux/pci.h>
 
+#define FCH_PM_BASE		0xFED80300
+
 #define MAX_AMD_NUM_NODES	8
 #define AMD_NODE0_PCI_SLOT	0x18
 
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index dd75916157f05..7c895001c5e8f 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -21,6 +21,7 @@
    an i2c_algorithm to access them.
 */
 
+#include <asm/amd_node.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/pci.h>
@@ -85,7 +86,6 @@
 #define SB800_PIIX4_PORT_IDX_MASK_KERNCZ	0x18
 #define SB800_PIIX4_PORT_IDX_SHIFT_KERNCZ	3
 
-#define SB800_PIIX4_FCH_PM_ADDR			0xFED80300
 #define SB800_PIIX4_FCH_PM_SIZE			8
 #define SB800_ASF_ACPI_PATH			"\\_SB.ASFC"
 
@@ -162,19 +162,19 @@ int piix4_sb800_region_request(struct device *dev, struct sb800_mmio_cfg *mmio_c
 	if (mmio_cfg->use_mmio) {
 		void __iomem *addr;
 
-		if (!request_mem_region_muxed(SB800_PIIX4_FCH_PM_ADDR,
+		if (!request_mem_region_muxed(FCH_PM_BASE,
 					      SB800_PIIX4_FCH_PM_SIZE,
 					      "sb800_piix4_smb")) {
 			dev_err(dev,
 				"SMBus base address memory region 0x%x already in use.\n",
-				SB800_PIIX4_FCH_PM_ADDR);
+				FCH_PM_BASE);
 			return -EBUSY;
 		}
 
-		addr = ioremap(SB800_PIIX4_FCH_PM_ADDR,
+		addr = ioremap(FCH_PM_BASE,
 			       SB800_PIIX4_FCH_PM_SIZE);
 		if (!addr) {
-			release_mem_region(SB800_PIIX4_FCH_PM_ADDR,
+			release_mem_region(FCH_PM_BASE,
 					   SB800_PIIX4_FCH_PM_SIZE);
 			dev_err(dev, "SMBus base address mapping failed.\n");
 			return -ENOMEM;
@@ -201,7 +201,7 @@ void piix4_sb800_region_release(struct device *dev, struct sb800_mmio_cfg *mmio_
 {
 	if (mmio_cfg->use_mmio) {
 		iounmap(mmio_cfg->addr);
-		release_mem_region(SB800_PIIX4_FCH_PM_ADDR,
+		release_mem_region(FCH_PM_BASE,
 				   SB800_PIIX4_FCH_PM_SIZE);
 		return;
 	}
-- 
2.43.0