[PATCH net-next v8 0/8] Add Microchip ZL3073x support (part 1)

[PATCH net-next v8 0/8] Add Microchip ZL3073x support (part 1)

[Ivan Vecera]

Add support for Microchip Azurite DPLL/PTP/SyncE chip family that
provides DPLL and PTP functionality. This series bring first part
that adds the common MFD driver that provides an access to the bus
that can be either I2C or SPI.

The next part of the series is bringing the DPLL driver that will
covers DPLL functionality. Another series will bring PTP driver and
flashing capability via devlink in the MFD driver will follow soon.

Testing was done by myself and by Prathosh Satish on Microchip EDS2
development board with ZL30732 DPLL chip connected over I2C bus.

Patch breakdown
===============
Patch 1 - Common DT schema for DPLL device and pin
Patch 2 - DT bindings for microchip,zl3073* devices
Patch 3 - Basic support for I2C, SPI and regmap configuration
Patch 4 - Devlink device registration and info
Patch 5 - Helpers for reading and writing register mailboxes
Patch 6 - Fetch invariant register values used by DPLL/PTP sub-drivers
Patch 7 - Clock ID generation for DPLL driver
Patch 8 - Register/create DPLL device cells

---
v7->v8:
* replaced zl3073x_pdata array ZL3073X_PDATA macro in patch 8
v6->v7:
* pass channel number using platform data instead of mfd_cell->id
v5->v6:
* fixed devlink info firmware version to be running instead of fixed
* added documentation for devlink info versions
v4->v5:
* fixed DT patches description
* dropped mailbox API
* added type-safe register access functions
* added an ability to protect multi-op accesses
v3->v4:
* fixed shortcomings in DT patches
* completely reworked register access
* removed a need to manage locking during mailbox accesses by callers
* regcache switched to maple
* dev_err_probe() in probe path
* static mfd cells during sub-devices registration
v1->v3:
* dropped macros for generating register access functions
* register access functions are provided in <linux/mfd/zl3073x_regs.h>
* fixed DT descriptions and compatible wildcard usage
* reworked regmap locking
  - regmap uses implicit locking
  - mailbox registers are additionally protected by extra mutex
* fixed regmap virtual address range
* added regmap rbtree cache (only for page selector now)
* dropped patches for exporting strnchrnul and for supporting mfg file
  this will be maybe added later

Ivan Vecera (8):
  dt-bindings: dpll: Add DPLL device and pin
  dt-bindings: dpll: Add support for Microchip Azurite chip family
  mfd: Add Microchip ZL3073x support
  mfd: zl3073x: Add support for devlink device info
  mfd: zl3073x: Protect operations requiring multiple register accesses
  mfd: zl3073x: Fetch invariants during probe
  mfd: zl3073x: Add clock_id field
  mfd: zl3073x: Register DPLL sub-device during init

 .../devicetree/bindings/dpll/dpll-device.yaml |  76 ++
 .../devicetree/bindings/dpll/dpll-pin.yaml    |  45 +
 .../bindings/dpll/microchip,zl30731.yaml      | 115 +++
 Documentation/networking/devlink/index.rst    |   1 +
 Documentation/networking/devlink/zl3073x.rst  |  37 +
 MAINTAINERS                                   |  11 +
 drivers/mfd/Kconfig                           |  32 +
 drivers/mfd/Makefile                          |   5 +
 drivers/mfd/zl3073x-core.c                    | 872 ++++++++++++++++++
 drivers/mfd/zl3073x-i2c.c                     |  68 ++
 drivers/mfd/zl3073x-regs.h                    |  54 ++
 drivers/mfd/zl3073x-spi.c                     |  68 ++
 drivers/mfd/zl3073x.h                         |  31 +
 include/linux/mfd/zl3073x-regs.h              |  88 ++
 include/linux/mfd/zl3073x.h                   | 202 ++++
 15 files changed, 1705 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/dpll/dpll-device.yaml
 create mode 100644 Documentation/devicetree/bindings/dpll/dpll-pin.yaml
 create mode 100644 Documentation/devicetree/bindings/dpll/microchip,zl30731.yaml
 create mode 100644 Documentation/networking/devlink/zl3073x.rst
 create mode 100644 drivers/mfd/zl3073x-core.c
 create mode 100644 drivers/mfd/zl3073x-i2c.c
 create mode 100644 drivers/mfd/zl3073x-regs.h
 create mode 100644 drivers/mfd/zl3073x-spi.c
 create mode 100644 drivers/mfd/zl3073x.h
 create mode 100644 include/linux/mfd/zl3073x-regs.h
 create mode 100644 include/linux/mfd/zl3073x.h

-- 
2.49.0

[PATCH net-next v8 1/8] dt-bindings: dpll: Add DPLL device and pin

[Ivan Vecera]

Add a common DT schema for DPLL device and its associated pins.
The DPLL (device phase-locked loop) is a device used for precise clock
synchronization in networking and telecom hardware.

The device includes one or more DPLLs (channels) and one or more
physical input/output pins.

Each DPLL channel is used either to provide a pulse-per-clock signal or
to drive an Ethernet equipment clock.

The input and output pins have the following properties:
* label: specifies board label
* connection type: specifies its usage depending on wiring
* list of supported or allowed frequencies: depending on how the pin
  is connected and where)
* embedded sync capability: indicates whether the pin supports this

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
---
v7->v8:
* no change
v6->v7:
* no change
v5->v6:
* no change
v4->v5:
* removed compilation output from the description
v3->v4:
* dropped $Ref from dpll-pin reg property
* added maxItems to dpll-pin reg property
* fixed paragraph in dpll-pin desc
* dpll-pin type property renamed to connection-type
v1->v3:
* rewritten description for both device and pin
* dropped num-dplls property
* supported-frequencies property renamed to supported-frequencies-hz
---
 .../devicetree/bindings/dpll/dpll-device.yaml | 76 +++++++++++++++++++
 .../devicetree/bindings/dpll/dpll-pin.yaml    | 45 +++++++++++
 MAINTAINERS                                   |  2 +
 3 files changed, 123 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/dpll/dpll-device.yaml
 create mode 100644 Documentation/devicetree/bindings/dpll/dpll-pin.yaml

diff --git a/Documentation/devicetree/bindings/dpll/dpll-device.yaml b/Documentation/devicetree/bindings/dpll/dpll-device.yaml
new file mode 100644
index 000000000000..fb8d7a9a3693
--- /dev/null
+++ b/Documentation/devicetree/bindings/dpll/dpll-device.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dpll/dpll-device.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Digital Phase-Locked Loop (DPLL) Device
+
+maintainers:
+  - Ivan Vecera <ivecera@redhat.com>
+
+description:
+  Digital Phase-Locked Loop (DPLL) device is used for precise clock
+  synchronization in networking and telecom hardware. The device can
+  have one or more channels (DPLLs) and one or more physical input and
+  output pins. Each DPLL channel can either produce pulse-per-clock signal
+  or drive ethernet equipment clock. The type of each channel can be
+  indicated by dpll-types property.
+
+properties:
+  $nodename:
+    pattern: "^dpll(@.*)?$"
+
+  "#address-cells":
+    const: 0
+
+  "#size-cells":
+    const: 0
+
+  dpll-types:
+    description: List of DPLL channel types, one per DPLL instance.
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    items:
+      enum: [pps, eec]
+
+  input-pins:
+    type: object
+    description: DPLL input pins
+    unevaluatedProperties: false
+
+    properties:
+      "#address-cells":
+        const: 1
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^pin@[0-9a-f]+$":
+        $ref: /schemas/dpll/dpll-pin.yaml
+        unevaluatedProperties: false
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+
+  output-pins:
+    type: object
+    description: DPLL output pins
+    unevaluatedProperties: false
+
+    properties:
+      "#address-cells":
+        const: 1
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^pin@[0-9]+$":
+        $ref: /schemas/dpll/dpll-pin.yaml
+        unevaluatedProperties: false
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/dpll/dpll-pin.yaml b/Documentation/devicetree/bindings/dpll/dpll-pin.yaml
new file mode 100644
index 000000000000..51db93b77306
--- /dev/null
+++ b/Documentation/devicetree/bindings/dpll/dpll-pin.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dpll/dpll-pin.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DPLL Pin
+
+maintainers:
+  - Ivan Vecera <ivecera@redhat.com>
+
+description: |
+  The DPLL pin is either a physical input or output pin that is provided
+  by a DPLL( Digital Phase-Locked Loop) device. The pin is identified by
+  its physical order number that is stored in reg property and can have
+  an additional set of properties like supported (allowed) frequencies,
+  label, type and may support embedded sync.
+
+  Note that the pin in this context has nothing to do with pinctrl.
+
+properties:
+  reg:
+    description: Hardware index of the DPLL pin.
+    maxItems: 1
+
+  connection-type:
+    description: Connection type of the pin
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [ext, gnss, int, mux, synce]
+
+  esync-control:
+    description: Indicates whether the pin supports embedded sync functionality.
+    type: boolean
+
+  label:
+    description: String exposed as the pin board label
+    $ref: /schemas/types.yaml#/definitions/string
+
+  supported-frequencies-hz:
+    description: List of supported frequencies for this pin, expressed in Hz.
+
+required:
+  - reg
+
+additionalProperties: false
diff --git a/MAINTAINERS b/MAINTAINERS
index a7545b5abef9..1477fbda7378 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7195,6 +7195,8 @@ M:	Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
 M:	Jiri Pirko <jiri@resnulli.us>
 L:	netdev@vger.kernel.org
 S:	Supported
+F:	Documentation/devicetree/bindings/dpll/dpll-device.yaml
+F:	Documentation/devicetree/bindings/dpll/dpll-pin.yaml
 F:	Documentation/driver-api/dpll.rst
 F:	drivers/dpll/*
 F:	include/linux/dpll.h
-- 
2.49.0

[PATCH net-next v8 2/8] dt-bindings: dpll: Add support for Microchip Azurite chip family

[Ivan Vecera]

Add DT bindings for Microchip Azurite DPLL chip family. These chips
provide up to 5 independent DPLL channels, 10 differential or
single-ended inputs and 10 differential or 20 single-ended outputs.
They can be connected via I2C or SPI busses.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
---
v7->v8:
* no change
v6->v7:
* no change
v5->v6:
* no change
v4->v5:
* removed compilation output from the description
v3->v4:
* fixed $Id
* dpll-pin type property renamed to connection type
v1->v3:
* single file for both i2c & spi
* 5 compatibles for all supported chips from the family
---
 .../bindings/dpll/microchip,zl30731.yaml      | 115 ++++++++++++++++++
 1 file changed, 115 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/dpll/microchip,zl30731.yaml

diff --git a/Documentation/devicetree/bindings/dpll/microchip,zl30731.yaml b/Documentation/devicetree/bindings/dpll/microchip,zl30731.yaml
new file mode 100644
index 000000000000..17747f754b84
--- /dev/null
+++ b/Documentation/devicetree/bindings/dpll/microchip,zl30731.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dpll/microchip,zl30731.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Azurite DPLL device
+
+maintainers:
+  - Ivan Vecera <ivecera@redhat.com>
+
+description:
+  Microchip Azurite DPLL (ZL3073x) is a family of DPLL devices that
+  provides up to 5 independent DPLL channels, up to 10 differential or
+  single-ended inputs and 10 differential or 20 single-ended outputs.
+  These devices support both I2C and SPI interfaces.
+
+properties:
+  compatible:
+    enum:
+      - microchip,zl30731
+      - microchip,zl30732
+      - microchip,zl30733
+      - microchip,zl30734
+      - microchip,zl30735
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/dpll/dpll-device.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      dpll@70 {
+        compatible = "microchip,zl30732";
+        reg = <0x70>;
+        dpll-types = "pps", "eec";
+
+        input-pins {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          pin@0 { /* REF0P */
+            reg = <0>;
+            connection-type = "ext";
+            label = "Input 0";
+            supported-frequencies-hz = /bits/ 64 <1 1000>;
+          };
+        };
+
+        output-pins {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          pin@3 { /* OUT1N */
+            reg = <3>;
+            connection-type = "gnss";
+            esync-control;
+            label = "Output 1";
+            supported-frequencies-hz = /bits/ 64 <1 10000>;
+          };
+        };
+      };
+    };
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      dpll@70 {
+        compatible = "microchip,zl30731";
+        reg = <0x70>;
+        spi-max-frequency = <12500000>;
+
+        dpll-types = "pps";
+
+        input-pins {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          pin@0 { /* REF0P */
+            reg = <0>;
+            connection-type = "ext";
+            label = "Input 0";
+            supported-frequencies-hz = /bits/ 64 <1 1000>;
+          };
+        };
+
+        output-pins {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          pin@3 { /* OUT1N */
+            reg = <3>;
+            connection-type = "gnss";
+            esync-control;
+            label = "Output 1";
+            supported-frequencies-hz = /bits/ 64 <1 10000>;
+          };
+        };
+      };
+    };
+...
-- 
2.49.0

[PATCH net-next v8 3/8] mfd: Add Microchip ZL3073x support

[Ivan Vecera]

Add base MFD driver for Microchip Azurite ZL3073x chip family.
These chips provide DPLL and PHC (PTP) functionality and can
be connected over I2C or SPI bus.

The MFD driver handles basic communication and synchronization
over the bus, as well as common functionality that are used by
the DPLL driver (part 2) and by the PTP driver (to be added later).

The chip family has the following characteristics:
* up to 5 separate DPLL units (channels)
* 5 synthesizers
* 10 input pins (references)
* 10 outputs
* 20 output pins (output pin pair shares one output)
* Each reference and output can operate in either differential or
  single-ended mode (differential mode uses 2 pins)
* Each output is connected to one of the synthesizers
* Each synthesizer is driven by one of the DPLL unit

The device uses 7-bit addresses and 8-bits values. It exposes 8-, 16-,
32- and 48-bits registers in address range <0x000,0x77F>. Due to 7bit
addressing, the range is organized into pages of 128 bytes, with each
page containing a page selector register at address 0x7F.
For reading/writing multi-byte registers, the device supports bulk
transfers.

Signed-off-by: Ivan Vecera <ivecera@redhat.com>
---
v7->v8:
* no change
v6->v7:
* no change
v5->v6:
* fixed condition for writing 48bit register value
v4->v5:
* added type-safe register access functions
* register definition macros moved to include/linux/mfd/zl3073x-regs.h
* register definition used only by MFD moved to drivers/mfd/zl3073x-regs.h

v3->v4:
* zl3073x_regs.h moved to drivers/mfd/
* maple as regcache
* added and used general helper to read 16bit registers
* removed mailbox mutex for now
* removed parentheses in zl3073x_is_volatile_reg()
* used dev_err_probe() in probe path
* dropped <linux/device.h> inclusion
* dropped unneccessary i2c_set_clientdata() and spi_set_drvdata()

v2->v3:
* added chip_info with valid chip ids and num of DPLLs for compatibles
* regmap is using implicit locking
* mailbox registers requires extra mutex to be held
* added helpers to access registers
* report device firmware and config version using dev_dbg
* fixed regmap ranges
* enabled rbtree regcache for page selector

v1->v2:
* fixed header issues
* removed usage of of_match_ptr
* added check for devm_mutex_init
* removed commas after sentinels
* removed variable initialization in zl3073x_i2c_probe()
* moved device tables closer to their users
* renamed zl3073x_dev_alloc() to zl3073x_devm_alloc()
* removed empty zl3073x_dev_exit()
* spidev renamed to spi
* squashed together with device DT bindings
* used dev_err_probe() instead of dev_err() during probe
* added some function documentation
DT bindings:
* spliced to separate files for i2c and spi
* fixed property order in DT bindings' examples
* added description
---
 MAINTAINERS                      |   9 +
 drivers/mfd/Kconfig              |  30 ++
 drivers/mfd/Makefile             |   5 +
 drivers/mfd/zl3073x-core.c       | 472 +++++++++++++++++++++++++++++++
 drivers/mfd/zl3073x-i2c.c        |  66 +++++
 drivers/mfd/zl3073x-regs.h       |  17 ++
 drivers/mfd/zl3073x-spi.c        |  66 +++++
 drivers/mfd/zl3073x.h            |  31 ++
 include/linux/mfd/zl3073x-regs.h |  66 +++++
 include/linux/mfd/zl3073x.h      |  35 +++
 10 files changed, 797 insertions(+)
 create mode 100644 drivers/mfd/zl3073x-core.c
 create mode 100644 drivers/mfd/zl3073x-i2c.c
 create mode 100644 drivers/mfd/zl3073x-regs.h
 create mode 100644 drivers/mfd/zl3073x-spi.c
 create mode 100644 drivers/mfd/zl3073x.h
 create mode 100644 include/linux/mfd/zl3073x-regs.h
 create mode 100644 include/linux/mfd/zl3073x.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 1477fbda7378..0c34f28cba0b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16052,6 +16052,15 @@ L:	linux-wireless@vger.kernel.org
 S:	Supported
 F:	drivers/net/wireless/microchip/
 
+MICROCHIP ZL3073X DRIVER
+M:	Ivan Vecera <ivecera@redhat.com>
+M:	Prathosh Satish <Prathosh.Satish@microchip.com>
+L:	netdev@vger.kernel.org
+S:	Supported
+F:	Documentation/devicetree/bindings/dpll/microchip,zl30731.yaml
+F:	drivers/mfd/zl3073x*
+F:	include/linux/mfd/zl3073x.h
+
 MICROSEMI MIPS SOCS
 M:	Alexandre Belloni <alexandre.belloni@bootlin.com>
 M:	UNGLinuxDriver@microchip.com
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 22b936310039..7d7902ec1d89 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -2422,5 +2422,35 @@ config MFD_UPBOARD_FPGA
 	  To compile this driver as a module, choose M here: the module will be
 	  called upboard-fpga.
 
+config MFD_ZL3073X_CORE
+	tristate
+	select MFD_CORE
+
+config MFD_ZL3073X_I2C
+	tristate "Microchip Azurite DPLL/PTP/SyncE with I2C"
+	depends on I2C
+	select MFD_ZL3073X_CORE
+	select REGMAP_I2C
+	help
+	  Say Y here if you want to build I2C support for the Microchip
+	  Azurite DPLL/PTP/SyncE chip family.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called zl3073x_i2c and you will also get zl3073x for
+	  the core module.
+
+config MFD_ZL3073X_SPI
+	tristate "Microchip Azurite DPLL/PTP/SyncE with SPI"
+	depends on SPI
+	select MFD_ZL3073X_CORE
+	select REGMAP_SPI
+	help
+	  Say Y here if you want to build SPI support for the Microchip
+	  Azurite DPLL/PTP/SyncE chip family.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called zl3073x_spi and you will also get zl3073x for
+	  the core module.
+
 endmenu
 endif
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 948cbdf42a18..76e2babc1538 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -290,3 +290,8 @@ obj-$(CONFIG_MFD_RSMU_I2C)	+= rsmu_i2c.o rsmu_core.o
 obj-$(CONFIG_MFD_RSMU_SPI)	+= rsmu_spi.o rsmu_core.o
 
 obj-$(CONFIG_MFD_UPBOARD_FPGA)	+= upboard-fpga.o
+
+zl3073x-y			:= zl3073x-core.o
+obj-$(CONFIG_MFD_ZL3073X_CORE)	+= zl3073x.o
+obj-$(CONFIG_MFD_ZL3073X_I2C)	+= zl3073x-i2c.o
+obj-$(CONFIG_MFD_ZL3073X_SPI)	+= zl3073x-spi.o
diff --git a/drivers/mfd/zl3073x-core.c b/drivers/mfd/zl3073x-core.c
new file mode 100644
index 000000000000..c408aafb0f8a
--- /dev/null
+++ b/drivers/mfd/zl3073x-core.c
@@ -0,0 +1,472 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/array_size.h>
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/dev_printk.h>
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/mfd/zl3073x.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/unaligned.h>
+#include "zl3073x.h"
+#include "zl3073x-regs.h"
+
+/* Chip IDs for zl30731 */
+static const u16 zl30731_ids[] = {
+	0x0E93,
+	0x1E93,
+	0x2E93,
+};
+
+/* Chip IDs for zl30732 */
+static const u16 zl30732_ids[] = {
+	0x0E30,
+	0x0E94,
+	0x1E94,
+	0x1F60,
+	0x2E94,
+	0x3FC4,
+};
+
+/* Chip IDs for zl30733 */
+static const u16 zl30733_ids[] = {
+	0x0E95,
+	0x1E95,
+	0x2E95,
+};
+
+/* Chip IDs for zl30734 */
+static const u16 zl30734_ids[] = {
+	0x0E96,
+	0x1E96,
+	0x2E96,
+};
+
+/* Chip IDs for zl30735 */
+static const u16 zl30735_ids[] = {
+	0x0E97,
+	0x1E97,
+	0x2E97,
+};
+
+const struct zl3073x_chip_info zl3073x_chip_info[] = {
+	[ZL30731] = {
+		.ids = zl30731_ids,
+		.num_ids = ARRAY_SIZE(zl30731_ids),
+		.num_channels = 1,
+	},
+	[ZL30732] = {
+		.ids = zl30732_ids,
+		.num_ids = ARRAY_SIZE(zl30732_ids),
+		.num_channels = 2,
+	},
+	[ZL30733] = {
+		.ids = zl30733_ids,
+		.num_ids = ARRAY_SIZE(zl30733_ids),
+		.num_channels = 3,
+	},
+	[ZL30734] = {
+		.ids = zl30734_ids,
+		.num_ids = ARRAY_SIZE(zl30734_ids),
+		.num_channels = 4,
+	},
+	[ZL30735] = {
+		.ids = zl30735_ids,
+		.num_ids = ARRAY_SIZE(zl30735_ids),
+		.num_channels = 5,
+	},
+};
+EXPORT_SYMBOL_NS_GPL(zl3073x_chip_info, "ZL3073X");
+
+#define ZL_RANGE_OFFSET		0x80
+#define ZL_PAGE_SIZE		0x80
+#define ZL_NUM_PAGES		15
+#define ZL_PAGE_SEL		0x7F
+#define ZL_PAGE_SEL_MASK	GENMASK(3, 0)
+#define ZL_NUM_REGS		(ZL_NUM_PAGES * ZL_PAGE_SIZE)
+
+/* Regmap range configuration */
+static const struct regmap_range_cfg zl3073x_regmap_range = {
+	.range_min	= ZL_RANGE_OFFSET,
+	.range_max	= ZL_RANGE_OFFSET + ZL_NUM_REGS - 1,
+	.selector_reg	= ZL_PAGE_SEL,
+	.selector_mask	= ZL_PAGE_SEL_MASK,
+	.selector_shift	= 0,
+	.window_start	= 0,
+	.window_len	= ZL_PAGE_SIZE,
+};
+
+static bool
+zl3073x_is_volatile_reg(struct device *dev __maybe_unused, unsigned int reg)
+{
+	/* Only page selector is non-volatile */
+	return reg != ZL_PAGE_SEL;
+}
+
+static const struct regmap_config zl3073x_regmap_config = {
+	.reg_bits	= 8,
+	.val_bits	= 8,
+	.max_register	= ZL_RANGE_OFFSET + ZL_NUM_REGS - 1,
+	.ranges		= &zl3073x_regmap_range,
+	.num_ranges	= 1,
+	.cache_type	= REGCACHE_MAPLE,
+	.volatile_reg	= zl3073x_is_volatile_reg,
+};
+
+static bool
+zl3073x_check_reg(struct zl3073x_dev *zldev, unsigned int reg, size_t size)
+{
+	/* Check the index is in valid range for indexed register */
+	if (ZL_REG_OFFSET(reg) > ZL_REG_MAX_OFFSET(reg)) {
+		dev_err(zldev->dev, "Index out of range for reg 0x%04lx\n",
+			ZL_REG_ADDR(reg));
+		return false;
+	}
+	/* Check the requested size corresponds to register size */
+	if (ZL_REG_SIZE(reg) != size) {
+		dev_err(zldev->dev, "Invalid size %zu for reg 0x%04lx\n",
+			size, ZL_REG_ADDR(reg));
+		return false;
+	}
+
+	return true;
+}
+
+static int
+zl3073x_read_reg(struct zl3073x_dev *zldev, unsigned int reg, void *val,
+		 size_t size)
+{
+	int rc;
+
+	if (!zl3073x_check_reg(zldev, reg, size))
+		return -EINVAL;
+
+	/* Map the register address to virtual range */
+	reg = ZL_REG_ADDR(reg) + ZL_RANGE_OFFSET;
+
+	rc = regmap_bulk_read(zldev->regmap, reg, val, size);
+	if (rc) {
+		dev_err(zldev->dev, "Failed to read reg 0x%04x: %pe\n", reg,
+			ERR_PTR(rc));
+		return rc;
+	}
+
+	return 0;
+}
+
+static int
+zl3073x_write_reg(struct zl3073x_dev *zldev, unsigned int reg, const void *val,
+		  size_t size)
+{
+	int rc;
+
+	if (!zl3073x_check_reg(zldev, reg, size))
+		return -EINVAL;
+
+	/* Map the register address to virtual range */
+	reg = ZL_REG_ADDR(reg) + ZL_RANGE_OFFSET;
+
+	rc = regmap_bulk_write(zldev->regmap, reg, val, size);
+	if (rc) {
+		dev_err(zldev->dev, "Failed to write reg 0x%04x: %pe\n", reg,
+			ERR_PTR(rc));
+		return rc;
+	}
+
+	return 0;
+}
+
+/**
+ * zl3073x_read_u8 - read value from 8bit register
+ * @zldev: zl3073x device pointer
+ * @reg: register to write to
+ * @val: value to write
+ *
+ * Reads value from given 8bit register.
+ *
+ * Returns: 0 on success, <0 on error
+ */
+int zl3073x_read_u8(struct zl3073x_dev *zldev, unsigned int reg, u8 *val)
+{
+	return zl3073x_read_reg(zldev, reg, val, sizeof(*val));
+}
+EXPORT_SYMBOL_NS_GPL(zl3073x_read_u8, "ZL3073X");
+
+/**
+ * zl3073x_write_u8 - write value to 16bit register
+ * @zldev: zl3073x device pointer
+ * @reg: register to write to
+ * @val: value to write
+ *
+ * Writes value into given 8bit register.
+ *
+ * Returns: 0 on success, <0 on error
+ */
+int zl3073x_write_u8(struct zl3073x_dev *zldev, unsigned int reg, u8 val)
+{
+	return zl3073x_write_reg(zldev, reg, &val, sizeof(val));
+}
+EXPORT_SYMBOL_NS_GPL(zl3073x_write_u8, "ZL3073X");
+
+/**
+ * zl3073x_read_u16 - read value from 16bit register
+ * @zldev: zl3073x device pointer
+ * @reg: register to write to
+ * @val: value to write
+ *
+ * Reads value from given 16bit register.
+ *
+ * Returns: 0 on success, <0 on error
+ */
+int zl3073x_read_u16(struct zl3073x_dev *zldev, unsigned int reg, u16 *val)
+{
+	int rc;
+
+	rc = zl3073x_read_reg(zldev, reg, val, sizeof(*val));
+	if (!rc)
+		be16_to_cpus(val);
+
+	return rc;
+}
+EXPORT_SYMBOL_NS_GPL(zl3073x_read_u16, "ZL3073X");
+
+/**
+ * zl3073x_write_u16 - write value to 16bit register
+ * @zldev: zl3073x device pointer
+ * @reg: register to write to
+ * @val: value to write
+ *
+ * Writes value into given 16bit register.
+ *
+ * Returns: 0 on success, <0 on error
+ */
+int zl3073x_write_u16(struct zl3073x_dev *zldev, unsigned int reg, u16 val)
+{
+	cpu_to_be16s(&val);
+
+	return zl3073x_write_reg(zldev, reg, &val, sizeof(val));
+}
+EXPORT_SYMBOL_NS_GPL(zl3073x_write_u16, "ZL3073X");
+
+/**
+ * zl3073x_read_u32 - read value from 32bit register
+ * @zldev: zl3073x device pointer
+ * @reg: register to write to
+ * @val: value to write
+ *
+ * Reads value from given 32bit register.
+ *
+ * Returns: 0 on success, <0 on error
+ */
+int zl3073x_read_u32(struct zl3073x_dev *zldev, unsigned int reg, u32 *val)
+{
+	int rc;
+
+	rc = zl3073x_read_reg(zldev, reg, val, sizeof(*val));
+	if (!rc)
+		be32_to_cpus(val);
+
+	return rc;
+}
+EXPORT_SYMBOL_NS_GPL(zl3073x_read_u32, "ZL3073X");
+
+/**
+ * zl3073x_write_u32 - write value to 32bit register
+ * @zldev: zl3073x device pointer
+ * @reg: register to write to
+ * @val: value to write
+ *
+ * Writes value into given 32bit register.
+ *
+ * Returns: 0 on success, <0 on error
+ */
+int zl3073x_write_u32(struct zl3073x_dev *zldev, unsigned int reg, u32 val)
+{
+	cpu_to_be32s(&val);
+
+	return zl3073x_write_reg(zldev, reg, &val, sizeof(val));
+}
+EXPORT_SYMBOL_NS_GPL(zl3073x_write_u32, "ZL3073X");
+
+/**
+ * zl3073x_read_u48 - read value from 48bit register
+ * @zldev: zl3073x device pointer
+ * @reg: register to write to
+ * @val: value to write
+ *
+ * Reads value from given 48bit register.
+ *
+ * Returns: 0 on success, <0 on error
+ */
+int zl3073x_read_u48(struct zl3073x_dev *zldev, unsigned int reg, u64 *val)
+{
+	u8 buf[6];
+	int rc;
+
+	rc = zl3073x_read_reg(zldev, reg, buf, sizeof(buf));
+	if (!rc)
+		*val = get_unaligned_be48(buf);
+
+	return rc;
+}
+EXPORT_SYMBOL_NS_GPL(zl3073x_read_u48, "ZL3073X");
+
+/**
+ * zl3073x_write_u48 - write value to 48bit register
+ * @zldev: zl3073x device pointer
+ * @reg: register to write to
+ * @val: value to write
+ *
+ * Writes value into given 48bit register.
+ * The value must be from the interval -S48_MIN to U48_MAX.
+ *
+ * Returns: 0 on success, <0 on error
+ */
+int zl3073x_write_u48(struct zl3073x_dev *zldev, unsigned int reg, u64 val)
+{
+	u8 buf[6];
+
+	/* Check the value belongs to <S48_MIN, U48_MAX>
+	 * Any value >= S48_MIN has bits 47..63 set.
+	 */
+	if (val > GENMASK_ULL(47, 0) && val < GENMASK_ULL(63, 47)) {
+		dev_err(zldev->dev, "Value 0x%0llx out of range\n", val);
+		return -EINVAL;
+	}
+
+	put_unaligned_be48(val, buf);
+
+	return zl3073x_write_reg(zldev, reg, buf, sizeof(buf));
+}
+EXPORT_SYMBOL_NS_GPL(zl3073x_write_u48, "ZL3073X");
+
+/**
+ * zl3073x_poll_zero_u8 - wait for register to be cleared by device
+ * @zldev: zl3073x device pointer
+ * @reg: register to poll (has to be 8bit register)
+ * @mask: bit mask for polling
+ *
+ * Waits for bits specified by @mask in register @reg value to be cleared
+ * by the device.
+ *
+ * Returns: 0 on success, <0 on error
+ */
+int zl3073x_poll_zero_u8(struct zl3073x_dev *zldev, unsigned int reg, u8 mask)
+{
+	/* Register polling sleep & timeout */
+#define ZL_POLL_SLEEP_US   10
+#define ZL_POLL_TIMEOUT_US 2000000
+	unsigned int val;
+
+	/* Check the register is 8bit */
+	if (ZL_REG_SIZE(reg) != 1) {
+		dev_err(zldev->dev, "Invalid reg 0x%04lx size for polling\n",
+			ZL_REG_ADDR(reg));
+		return -EINVAL;
+	}
+
+	/* Map the register address to virtual range */
+	reg = ZL_REG_ADDR(reg) + ZL_RANGE_OFFSET;
+
+	return regmap_read_poll_timeout(zldev->regmap, reg, val, !(val & mask),
+					ZL_POLL_SLEEP_US, ZL_POLL_TIMEOUT_US);
+}
+EXPORT_SYMBOL_NS_GPL(zl3073x_poll_zero_u8, "ZL3073X");
+
+/**
+ * zl3073x_devm_alloc - allocates zl3073x device structure
+ * @dev: pointer to device structure
+ *
+ * Allocates zl3073x device structure as device resource.
+ *
+ * Return: pointer to zl3073x device on success, error pointer on error
+ */
+struct zl3073x_dev *zl3073x_devm_alloc(struct device *dev)
+{
+	struct zl3073x_dev *zldev;
+
+	zldev = devm_kzalloc(dev, sizeof(*zldev), GFP_KERNEL);
+	if (!zldev)
+		return ERR_PTR(-ENOMEM);
+
+	zldev->dev = dev;
+	dev_set_drvdata(zldev->dev, zldev);
+
+	return zldev;
+}
+EXPORT_SYMBOL_NS_GPL(zl3073x_devm_alloc, "ZL3073X");
+
+/**
+ * zl3073x_dev_init_regmap_config - initialize regmap config
+ * @regmap_cfg: regmap_config structure to fill
+ *
+ * Initializes regmap config common for I2C and SPI.
+ */
+void zl3073x_dev_init_regmap_config(struct regmap_config *regmap_cfg)
+{
+	*regmap_cfg = zl3073x_regmap_config;
+}
+EXPORT_SYMBOL_NS_GPL(zl3073x_dev_init_regmap_config, "ZL3073X");
+
+/**
+ * zl3073x_dev_probe - initialize zl3073x device
+ * @zldev: pointer to zl3073x device
+ * @chip_info: chip info based on compatible
+ *
+ * Common initialization of zl3073x device structure.
+ *
+ * Returns: 0 on success, <0 on error
+ */
+int zl3073x_dev_probe(struct zl3073x_dev *zldev,
+		      const struct zl3073x_chip_info *chip_info)
+{
+	u16 id, revision, fw_ver;
+	unsigned int i;
+	u32 cfg_ver;
+	int rc;
+
+	/* Read chip ID */
+	rc = zl3073x_read_u16(zldev, ZL_REG_ID, &id);
+	if (rc)
+		return rc;
+
+	/* Check it matches */
+	for (i = 0; i < chip_info->num_ids; i++) {
+		if (id == chip_info->ids[i])
+			break;
+	}
+
+	if (i == chip_info->num_ids) {
+		return dev_err_probe(zldev->dev, -ENODEV,
+				     "Unknown or non-match chip ID: 0x%0x\n",
+				     id);
+	}
+
+	/* Read revision, firmware version and custom config version */
+	rc = zl3073x_read_u16(zldev, ZL_REG_REVISION, &revision);
+	if (rc)
+		return rc;
+	rc = zl3073x_read_u16(zldev, ZL_REG_FW_VER, &fw_ver);
+	if (rc)
+		return rc;
+	rc = zl3073x_read_u32(zldev, ZL_REG_CUSTOM_CONFIG_VER, &cfg_ver);
+	if (rc)
+		return rc;
+
+	dev_dbg(zldev->dev, "ChipID(%X), ChipRev(%X), FwVer(%u)\n", id,
+		revision, fw_ver);
+	dev_dbg(zldev->dev, "Custom config version: %lu.%lu.%lu.%lu\n",
+		FIELD_GET(GENMASK(31, 24), cfg_ver),
+		FIELD_GET(GENMASK(23, 16), cfg_ver),
+		FIELD_GET(GENMASK(15, 8), cfg_ver),
+		FIELD_GET(GENMASK(7, 0), cfg_ver));
+
+	return 0;
+}
+EXPORT_SYMBOL_NS_GPL(zl3073x_dev_probe, "ZL3073X");
+
+MODULE_AUTHOR("Ivan Vecera <ivecera@redhat.com>");
+MODULE_DESCRIPTION("Microchip ZL3073x core driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/zl3073x-i2c.c b/drivers/mfd/zl3073x-i2c.c
new file mode 100644
index 000000000000..da8bbd702d76
--- /dev/null
+++ b/drivers/mfd/zl3073x-i2c.c
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/dev_printk.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/mfd/zl3073x.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include "zl3073x.h"
+
+static int zl3073x_i2c_probe(struct i2c_client *client)
+{
+	struct regmap_config regmap_cfg;
+	struct device *dev = &client->dev;
+	struct zl3073x_dev *zldev;
+
+	zldev = zl3073x_devm_alloc(dev);
+	if (IS_ERR(zldev))
+		return PTR_ERR(zldev);
+
+	zl3073x_dev_init_regmap_config(&regmap_cfg);
+
+	zldev->regmap = devm_regmap_init_i2c(client, &regmap_cfg);
+	if (IS_ERR(zldev->regmap)) {
+		dev_err_probe(dev, PTR_ERR(zldev->regmap),
+			      "Failed to initialize regmap\n");
+		return PTR_ERR(zldev->regmap);
+	}
+
+	return zl3073x_dev_probe(zldev, i2c_get_match_data(client));
+}
+
+static const struct i2c_device_id zl3073x_i2c_id[] = {
+	{ "zl30731", .driver_data = (kernel_ulong_t)&zl3073x_chip_info[ZL30731] },
+	{ "zl30732", .driver_data = (kernel_ulong_t)&zl3073x_chip_info[ZL30732] },
+	{ "zl30733", .driver_data = (kernel_ulong_t)&zl3073x_chip_info[ZL30733] },
+	{ "zl30734", .driver_data = (kernel_ulong_t)&zl3073x_chip_info[ZL30734] },
+	{ "zl30735", .driver_data = (kernel_ulong_t)&zl3073x_chip_info[ZL30735] },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(i2c, zl3073x_i2c_id);
+
+static const struct of_device_id zl3073x_i2c_of_match[] = {
+	{ .compatible = "microchip,zl30731", .data = &zl3073x_chip_info[ZL30731] },
+	{ .compatible = "microchip,zl30732", .data = &zl3073x_chip_info[ZL30732] },
+	{ .compatible = "microchip,zl30733", .data = &zl3073x_chip_info[ZL30733] },
+	{ .compatible = "microchip,zl30734", .data = &zl3073x_chip_info[ZL30734] },
+	{ .compatible = "microchip,zl30735", .data = &zl3073x_chip_info[ZL30735] },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, zl3073x_i2c_of_match);
+
+static struct i2c_driver zl3073x_i2c_driver = {
+	.driver = {
+		.name = "zl3073x-i2c",
+		.of_match_table = zl3073x_i2c_of_match,
+	},
+	.probe = zl3073x_i2c_probe,
+	.id_table = zl3073x_i2c_id,
+};
+module_i2c_driver(zl3073x_i2c_driver);
+
+MODULE_AUTHOR("Ivan Vecera <ivecera@redhat.com>");
+MODULE_DESCRIPTION("Microchip ZL3073x I2C driver");
+MODULE_IMPORT_NS("ZL3073X");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/zl3073x-regs.h b/drivers/mfd/zl3073x-regs.h
new file mode 100644
index 000000000000..6bb7ea1ef0b5
--- /dev/null
+++ b/drivers/mfd/zl3073x-regs.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __ZL3073X_REGS_H
+#define __ZL3073X_REGS_H
+
+#include <linux/mfd/zl3073x-regs.h>
+
+/**************************
+ * Register Page 0, General
+ **************************/
+
+#define ZL_REG_ID				ZL_REG(0, 0x01, 2)
+#define ZL_REG_REVISION				ZL_REG(0, 0x03, 2)
+#define ZL_REG_FW_VER				ZL_REG(0, 0x05, 2)
+#define ZL_REG_CUSTOM_CONFIG_VER		ZL_REG(0, 0x07, 4)
+
+#endif /* __ZL3073X_REGS_H */
diff --git a/drivers/mfd/zl3073x-spi.c b/drivers/mfd/zl3073x-spi.c
new file mode 100644
index 000000000000..962b6845c032
--- /dev/null
+++ b/drivers/mfd/zl3073x-spi.c
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/dev_printk.h>
+#include <linux/err.h>
+#include <linux/mfd/zl3073x.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/spi/spi.h>
+#include "zl3073x.h"
+
+static int zl3073x_spi_probe(struct spi_device *spi)
+{
+	struct regmap_config regmap_cfg;
+	struct device *dev = &spi->dev;
+	struct zl3073x_dev *zldev;
+
+	zldev = zl3073x_devm_alloc(dev);
+	if (IS_ERR(zldev))
+		return PTR_ERR(zldev);
+
+	zl3073x_dev_init_regmap_config(&regmap_cfg);
+
+	zldev->regmap = devm_regmap_init_spi(spi, &regmap_cfg);
+	if (IS_ERR(zldev->regmap)) {
+		dev_err_probe(dev, PTR_ERR(zldev->regmap),
+			      "Failed to initialize regmap\n");
+		return PTR_ERR(zldev->regmap);
+	}
+
+	return zl3073x_dev_probe(zldev, spi_get_device_match_data(spi));
+}
+
+static const struct spi_device_id zl3073x_spi_id[] = {
+	{ "zl30731", .driver_data = (kernel_ulong_t)&zl3073x_chip_info[ZL30731] },
+	{ "zl30731", .driver_data = (kernel_ulong_t)&zl3073x_chip_info[ZL30732] },
+	{ "zl30731", .driver_data = (kernel_ulong_t)&zl3073x_chip_info[ZL30733] },
+	{ "zl30731", .driver_data = (kernel_ulong_t)&zl3073x_chip_info[ZL30734] },
+	{ "zl30731", .driver_data = (kernel_ulong_t)&zl3073x_chip_info[ZL30735] },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(spi, zl3073x_spi_id);
+
+static const struct of_device_id zl3073x_spi_of_match[] = {
+	{ .compatible = "microchip,zl30731", .data = &zl3073x_chip_info[ZL30731] },
+	{ .compatible = "microchip,zl30732", .data = &zl3073x_chip_info[ZL30732] },
+	{ .compatible = "microchip,zl30733", .data = &zl3073x_chip_info[ZL30733] },
+	{ .compatible = "microchip,zl30734", .data = &zl3073x_chip_info[ZL30734] },
+	{ .compatible = "microchip,zl30735", .data = &zl3073x_chip_info[ZL30735] },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, zl3073x_spi_of_match);
+
+static struct spi_driver zl3073x_spi_driver = {
+	.driver = {
+		.name = "zl3073x-spi",
+		.of_match_table = zl3073x_spi_of_match,
+	},
+	.probe = zl3073x_spi_probe,
+	.id_table = zl3073x_spi_id,
+};
+module_spi_driver(zl3073x_spi_driver);
+
+MODULE_AUTHOR("Ivan Vecera <ivecera@redhat.com>");
+MODULE_DESCRIPTION("Microchip ZL3073x SPI driver");
+MODULE_IMPORT_NS("ZL3073X");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/zl3073x.h b/drivers/mfd/zl3073x.h
new file mode 100644
index 000000000000..3a2fea61cf57
--- /dev/null
+++ b/drivers/mfd/zl3073x.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __ZL3073X_CORE_H
+#define __ZL3073X_CORE_H
+
+struct device;
+struct regmap_config;
+struct zl3073x_dev;
+
+enum zl3073x_chip_type {
+	ZL30731,
+	ZL30732,
+	ZL30733,
+	ZL30734,
+	ZL30735,
+};
+
+struct zl3073x_chip_info {
+	const u16	*ids;
+	size_t		num_ids;
+	int		num_channels;
+};
+
+extern const struct zl3073x_chip_info zl3073x_chip_info[];
+
+struct zl3073x_dev *zl3073x_devm_alloc(struct device *dev);
+void zl3073x_dev_init_regmap_config(struct regmap_config *regmap_cfg);
+int zl3073x_dev_probe(struct zl3073x_dev *zldev,
+		      const struct zl3073x_chip_info *chip_info);
+
+#endif /* __ZL3073X_CORE_H */
diff --git a/include/linux/mfd/zl3073x-regs.h b/include/linux/mfd/zl3073x-regs.h
new file mode 100644
index 000000000000..cd2baed244eb
--- /dev/null
+++ b/include/linux/mfd/zl3073x-regs.h
@@ -0,0 +1,66 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __LINUX_MFD_ZL3073X_REGS_H
+#define __LINUX_MFD_ZL3073X_REGS_H
+
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+
+/*
+ * Register address structure:
+ * ===========================
+ *  25        19 18  16 15     7 6           0
+ * +------------------------------------------+
+ * | max_offset | size |  page  | page_offset |
+ * +------------------------------------------+
+ *
+ * page_offset ... <0x00..0x7F>
+ * page .......... HW page number
+ * size .......... register byte size (1, 2, 4 or 6)
+ * max_offset .... maximal offset for indexed registers
+ *                 (for non-indexed regs max_offset == page_offset)
+ */
+
+#define ZL_REG_OFFSET_MASK	GENMASK(6, 0)
+#define ZL_REG_PAGE_MASK	GENMASK(15, 7)
+#define ZL_REG_SIZE_MASK	GENMASK(18, 16)
+#define ZL_REG_MAX_OFFSET_MASK	GENMASK(25, 19)
+#define ZL_REG_ADDR_MASK	GENMASK(15, 0)
+
+#define ZL_REG_OFFSET(_reg)	FIELD_GET(ZL_REG_OFFSET_MASK, _reg)
+#define ZL_REG_PAGE(_reg)	FIELD_GET(ZL_REG_PAGE_MASK, _reg)
+#define ZL_REG_MAX_OFFSET(_reg)	FIELD_GET(ZL_REG_MAX_OFFSET_MASK, _reg)
+#define ZL_REG_SIZE(_reg)	FIELD_GET(ZL_REG_SIZE_MASK, _reg)
+#define ZL_REG_ADDR(_reg)	FIELD_GET(ZL_REG_ADDR_MASK, _reg)
+
+/**
+ * ZL_REG_IDX - define indexed register
+ * @_idx: index of register to access
+ * @_page: register page
+ * @_offset: register offset in page
+ * @_size: register byte size (1, 2, 4 or 6)
+ * @_items: number of register indices
+ * @_stride: stride between items in bytes
+ *
+ * All parameters except @_idx should be constant.
+ */
+#define ZL_REG_IDX(_idx, _page, _offset, _size, _items, _stride)	\
+	(FIELD_PREP(ZL_REG_OFFSET_MASK,					\
+		    (_offset) + (_idx) * (_stride))		|	\
+	 FIELD_PREP_CONST(ZL_REG_PAGE_MASK, _page)		|	\
+	 FIELD_PREP_CONST(ZL_REG_SIZE_MASK, _size)		|	\
+	 FIELD_PREP_CONST(ZL_REG_MAX_OFFSET_MASK,			\
+			  (_offset) + ((_items) - 1) * (_stride)))
+
+/**
+ * ZL_REG - define simple (non-indexed) register
+ * @_page: register page
+ * @_offset: register offset in page
+ * @_size: register byte size (1, 2, 4 or 6)
+ *
+ * All parameters should be constant.
+ */
+#define ZL_REG(_page, _offset, _size)					\
+	ZL_REG_IDX(0, _page, _offset, _size, 1, 0)
+
+#endif /* __LINUX_MFD_ZL3073X_REGS_H */
diff --git a/include/linux/mfd/zl3073x.h b/include/linux/mfd/zl3073x.h
new file mode 100644
index 000000000000..8df10b82e3c2
--- /dev/null
+++ b/include/linux/mfd/zl3073x.h
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __LINUX_MFD_ZL3073X_H
+#define __LINUX_MFD_ZL3073X_H
+
+#include <linux/types.h>
+
+struct device;
+struct regmap;
+
+/**
+ * struct zl3073x_dev - zl3073x device
+ * @dev: pointer to device
+ * @regmap: regmap to access device registers
+ */
+struct zl3073x_dev {
+	struct device		*dev;
+	struct regmap		*regmap;
+};
+
+/**********************
+ * Registers operations
+ **********************/
+
+int zl3073x_poll_zero_u8(struct zl3073x_dev *zldev, unsigned int reg, u8 mask);
+int zl3073x_read_u8(struct zl3073x_dev *zldev, unsigned int reg, u8 *val);
+int zl3073x_read_u16(struct zl3073x_dev *zldev, unsigned int reg, u16 *val);
+int zl3073x_read_u32(struct zl3073x_dev *zldev, unsigned int reg, u32 *val);
+int zl3073x_read_u48(struct zl3073x_dev *zldev, unsigned int reg, u64 *val);
+int zl3073x_write_u8(struct zl3073x_dev *zldev, unsigned int reg, u8 val);
+int zl3073x_write_u16(struct zl3073x_dev *zldev, unsigned int reg, u16 val);
+int zl3073x_write_u32(struct zl3073x_dev *zldev, unsigned int reg, u32 val);
+int zl3073x_write_u48(struct zl3073x_dev *zldev, unsigned int reg, u64 val);
+
+#endif /* __LINUX_MFD_ZL3073X_H */
-- 
2.49.0

[PATCH net-next v8 4/8] mfd: zl3073x: Add support for devlink device info

[Ivan Vecera]

Use devlink_alloc() to allocate zl3073x_dev structure, register
the device as a devlink device, and add devlink callback to provide
device info.

Signed-off-by: Ivan Vecera <ivecera@redhat.com>
---
v7->v8:
* no change
v6->v7:
* no change
v5->v6:
* fixed devlink info firmware version to be running instead of fixed
* added documentation for devlink info versions

v4->v5:
* use new register access helpers

v3->v4:
* pass error code from devm_add_action_or_reset() call

v2->v3:
* merged devlink device allocation, registration and device info
  callback

v1->v2:
* dependency on NET moved to MFD_ZL3073X_CORE in Kconfig
* devlink register managed way
---
 Documentation/networking/devlink/index.rst   |   1 +
 Documentation/networking/devlink/zl3073x.rst |  37 +++++++
 drivers/mfd/Kconfig                          |   2 +
 drivers/mfd/zl3073x-core.c                   | 108 ++++++++++++++++++-
 4 files changed, 146 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/networking/devlink/zl3073x.rst

diff --git a/Documentation/networking/devlink/index.rst b/Documentation/networking/devlink/index.rst
index 8319f43b5933..250ae71f4023 100644
--- a/Documentation/networking/devlink/index.rst
+++ b/Documentation/networking/devlink/index.rst
@@ -98,3 +98,4 @@ parameters, info versions, and other features it supports.
    iosm
    octeontx2
    sfc
+   zl3073x
diff --git a/Documentation/networking/devlink/zl3073x.rst b/Documentation/networking/devlink/zl3073x.rst
new file mode 100644
index 000000000000..9a6744fb2e86
--- /dev/null
+++ b/Documentation/networking/devlink/zl3073x.rst
@@ -0,0 +1,37 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=======================
+zl3073x devlink support
+=======================
+
+This document describes the devlink features implemented by the ``zl3073x``
+device driver.
+
+Info versions
+=============
+
+The ``zl3073x`` driver reports the following versions
+
+.. list-table:: devlink info versions implemented
+    :widths: 5 5 5 90
+
+    * - Name
+      - Type
+      - Example
+      - Description
+    * - ``asic.id``
+      - fixed
+      - 1E94
+      - Chip identification number
+    * - ``asic.rev``
+      - fixed
+      - 300
+      - Chip revision number
+    * - ``fw``
+      - running
+      - 7006
+      - Firmware version number
+    * - ``cfg.custom_ver``
+      - running
+      - 1.3.0.1
+      - Device configuration version customized by OEM
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 7d7902ec1d89..e4eca15af175 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -2424,6 +2424,8 @@ config MFD_UPBOARD_FPGA
 
 config MFD_ZL3073X_CORE
 	tristate
+	depends on NET
+	select NET_DEVLINK
 	select MFD_CORE
 
 config MFD_ZL3073X_I2C
diff --git a/drivers/mfd/zl3073x-core.c b/drivers/mfd/zl3073x-core.c
index c408aafb0f8a..079550682510 100644
--- a/drivers/mfd/zl3073x-core.c
+++ b/drivers/mfd/zl3073x-core.c
@@ -8,8 +8,11 @@
 #include <linux/export.h>
 #include <linux/mfd/zl3073x.h>
 #include <linux/module.h>
+#include <linux/netlink.h>
 #include <linux/regmap.h>
+#include <linux/sprintf.h>
 #include <linux/unaligned.h>
+#include <net/devlink.h>
 #include "zl3073x.h"
 #include "zl3073x-regs.h"
 
@@ -375,6 +378,83 @@ int zl3073x_poll_zero_u8(struct zl3073x_dev *zldev, unsigned int reg, u8 mask)
 }
 EXPORT_SYMBOL_NS_GPL(zl3073x_poll_zero_u8, "ZL3073X");
 
+/**
+ * zl3073x_devlink_info_get - Devlink device info callback
+ * @devlink: devlink structure pointer
+ * @req: devlink request pointer to store information
+ * @extack: netlink extack pointer to report errors
+ *
+ * Return: 0 on success, <0 on error
+ */
+static int zl3073x_devlink_info_get(struct devlink *devlink,
+				    struct devlink_info_req *req,
+				    struct netlink_ext_ack *extack)
+{
+	struct zl3073x_dev *zldev = devlink_priv(devlink);
+	u16 id, revision, fw_ver;
+	char buf[16];
+	u32 cfg_ver;
+	int rc;
+
+	rc = zl3073x_read_u16(zldev, ZL_REG_ID, &id);
+	if (rc)
+		return rc;
+
+	snprintf(buf, sizeof(buf), "%X", id);
+	rc = devlink_info_version_fixed_put(req,
+					    DEVLINK_INFO_VERSION_GENERIC_ASIC_ID,
+					    buf);
+	if (rc)
+		return rc;
+
+	rc = zl3073x_read_u16(zldev, ZL_REG_REVISION, &revision);
+	if (rc)
+		return rc;
+
+	snprintf(buf, sizeof(buf), "%X", revision);
+	rc = devlink_info_version_fixed_put(req,
+					    DEVLINK_INFO_VERSION_GENERIC_ASIC_REV,
+					    buf);
+	if (rc)
+		return rc;
+
+	rc = zl3073x_read_u16(zldev, ZL_REG_FW_VER, &fw_ver);
+	if (rc)
+		return rc;
+
+	snprintf(buf, sizeof(buf), "%u", fw_ver);
+	rc = devlink_info_version_running_put(req,
+					      DEVLINK_INFO_VERSION_GENERIC_FW,
+					      buf);
+	if (rc)
+		return rc;
+
+	rc = zl3073x_read_u32(zldev, ZL_REG_CUSTOM_CONFIG_VER, &cfg_ver);
+	if (rc)
+		return rc;
+
+	/* No custom config version */
+	if (cfg_ver == U32_MAX)
+		return 0;
+
+	snprintf(buf, sizeof(buf), "%lu.%lu.%lu.%lu",
+		 FIELD_GET(GENMASK(31, 24), cfg_ver),
+		 FIELD_GET(GENMASK(23, 16), cfg_ver),
+		 FIELD_GET(GENMASK(15, 8), cfg_ver),
+		 FIELD_GET(GENMASK(7, 0), cfg_ver));
+
+	return devlink_info_version_running_put(req, "cfg.custom_ver", buf);
+}
+
+static const struct devlink_ops zl3073x_devlink_ops = {
+	.info_get = zl3073x_devlink_info_get,
+};
+
+static void zl3073x_devlink_free(void *ptr)
+{
+	devlink_free(ptr);
+}
+
 /**
  * zl3073x_devm_alloc - allocates zl3073x device structure
  * @dev: pointer to device structure
@@ -386,11 +466,19 @@ EXPORT_SYMBOL_NS_GPL(zl3073x_poll_zero_u8, "ZL3073X");
 struct zl3073x_dev *zl3073x_devm_alloc(struct device *dev)
 {
 	struct zl3073x_dev *zldev;
+	struct devlink *devlink;
+	int rc;
 
-	zldev = devm_kzalloc(dev, sizeof(*zldev), GFP_KERNEL);
-	if (!zldev)
+	devlink = devlink_alloc(&zl3073x_devlink_ops, sizeof(*zldev), dev);
+	if (!devlink)
 		return ERR_PTR(-ENOMEM);
 
+	/* Add devres action to free devlink device */
+	rc = devm_add_action_or_reset(dev, zl3073x_devlink_free, devlink);
+	if (rc)
+		return ERR_PTR(rc);
+
+	zldev = devlink_priv(devlink);
 	zldev->dev = dev;
 	dev_set_drvdata(zldev->dev, zldev);
 
@@ -410,6 +498,11 @@ void zl3073x_dev_init_regmap_config(struct regmap_config *regmap_cfg)
 }
 EXPORT_SYMBOL_NS_GPL(zl3073x_dev_init_regmap_config, "ZL3073X");
 
+static void zl3073x_devlink_unregister(void *ptr)
+{
+	devlink_unregister(ptr);
+}
+
 /**
  * zl3073x_dev_probe - initialize zl3073x device
  * @zldev: pointer to zl3073x device
@@ -423,6 +516,7 @@ int zl3073x_dev_probe(struct zl3073x_dev *zldev,
 		      const struct zl3073x_chip_info *chip_info)
 {
 	u16 id, revision, fw_ver;
+	struct devlink *devlink;
 	unsigned int i;
 	u32 cfg_ver;
 	int rc;
@@ -463,6 +557,16 @@ int zl3073x_dev_probe(struct zl3073x_dev *zldev,
 		FIELD_GET(GENMASK(15, 8), cfg_ver),
 		FIELD_GET(GENMASK(7, 0), cfg_ver));
 
+	/* Register the device as devlink device */
+	devlink = priv_to_devlink(zldev);
+	devlink_register(devlink);
+
+	/* Add devres action to unregister devlink device */
+	rc = devm_add_action_or_reset(zldev->dev, zl3073x_devlink_unregister,
+				      devlink);
+	if (rc)
+		return rc;
+
 	return 0;
 }
 EXPORT_SYMBOL_NS_GPL(zl3073x_dev_probe, "ZL3073X");
-- 
2.49.0

[PATCH net-next v8 5/8] mfd: zl3073x: Protect operations requiring multiple register accesses

[Ivan Vecera]

Registers located on page 10 and above are called mailbox-type
registers. Each page represents a mailbox and is used to read from
and write to configuration of a specific object (DPLL, output,
reference or synth).

Each mailbox page contains a mask register, which selects an index of
the target object to interact with and a semaphore register, which
indicates the requested operation.

The remaining registers within the page are latch registers, which are
populated by the firmware during read operations or by the driver prior
to write operations.

Operations with these registers requires multiple register reads, writes
and polls and all of them need to be done atomically.

So add multiop_lock mutex to protect such operations and check the mutex
is held by the caller when it's accessing registers from page 10 and
above.

Signed-off-by: Ivan Vecera <ivecera@redhat.com>
---
v7->v8:
* no change
v6->v7:
* no change
v5->v6:
* no change
v4->v5:
* dropped mailbox API and replaced by an ability to protect multi-op
  accesses
v3->v4:
* completely reworked mailbox access
v1->v3:
* dropped ZL3073X_MB_OP macro usage
---
 drivers/mfd/zl3073x-core.c  | 14 ++++++++++++++
 include/linux/mfd/zl3073x.h |  3 +++
 2 files changed, 17 insertions(+)

diff --git a/drivers/mfd/zl3073x-core.c b/drivers/mfd/zl3073x-core.c
index 079550682510..a12cfc7eb6ff 100644
--- a/drivers/mfd/zl3073x-core.c
+++ b/drivers/mfd/zl3073x-core.c
@@ -121,6 +121,12 @@ static const struct regmap_config zl3073x_regmap_config = {
 static bool
 zl3073x_check_reg(struct zl3073x_dev *zldev, unsigned int reg, size_t size)
 {
+	/* Check that multiop lock is held when accessing registers
+	 * from page 10 and above.
+	 */
+	if (ZL_REG_PAGE(reg) >= 10)
+		lockdep_assert_held(&zldev->multiop_lock);
+
 	/* Check the index is in valid range for indexed register */
 	if (ZL_REG_OFFSET(reg) > ZL_REG_MAX_OFFSET(reg)) {
 		dev_err(zldev->dev, "Index out of range for reg 0x%04lx\n",
@@ -557,6 +563,14 @@ int zl3073x_dev_probe(struct zl3073x_dev *zldev,
 		FIELD_GET(GENMASK(15, 8), cfg_ver),
 		FIELD_GET(GENMASK(7, 0), cfg_ver));
 
+	/* Initialize mutex for operations where multiple reads, writes
+	 * and/or polls are required to be done atomically.
+	 */
+	rc = devm_mutex_init(zldev->dev, &zldev->multiop_lock);
+	if (rc)
+		return dev_err_probe(zldev->dev, rc,
+				     "Failed to initialize mutex\n");
+
 	/* Register the device as devlink device */
 	devlink = priv_to_devlink(zldev);
 	devlink_register(devlink);
diff --git a/include/linux/mfd/zl3073x.h b/include/linux/mfd/zl3073x.h
index 8df10b82e3c2..a42a275577c4 100644
--- a/include/linux/mfd/zl3073x.h
+++ b/include/linux/mfd/zl3073x.h
@@ -3,6 +3,7 @@
 #ifndef __LINUX_MFD_ZL3073X_H
 #define __LINUX_MFD_ZL3073X_H
 
+#include <linux/mutex.h>
 #include <linux/types.h>
 
 struct device;
@@ -12,10 +13,12 @@ struct regmap;
  * struct zl3073x_dev - zl3073x device
  * @dev: pointer to device
  * @regmap: regmap to access device registers
+ * @multiop_lock: to serialize multiple register operations
  */
 struct zl3073x_dev {
 	struct device		*dev;
 	struct regmap		*regmap;
+	struct mutex		multiop_lock;
 };
 
 /**********************
-- 
2.49.0

[PATCH net-next v8 6/8] mfd: zl3073x: Fetch invariants during probe

[Ivan Vecera]

Several configuration parameters will remain constant at runtime,
so we can load them during probe to avoid excessive reads from
the hardware.

These parameters will be frequently accessed by the DPLL sub-device
driver (in follow-up series), and later by the PHC/PTP sub-device
driver.

Read the following parameters from the device during probe and store
them for later use:

* frequencies of the synthesizers and their associated DPLL channels
* enablement and type (single-ended or differential) of input pins
* associated synthesizers, signal format, and enablement status of
  outputs

Signed-off-by: Ivan Vecera <ivecera@redhat.com>
---
v7->v8:
* no change
v6->v7:
* export zl3073x_mb_op() - will be used immediatelly in part2
v5->v6:
* no change
v4->v5:
* updated to use new register API
v3->v4:
* adjusted for new mailbox API
v2->v3:
* dropped usage of macros for generating helper functions
v1->v2:
* fixed and added inline documentation
---
 drivers/mfd/zl3073x-core.c       | 251 +++++++++++++++++++++++++++++++
 drivers/mfd/zl3073x-regs.h       |  37 +++++
 include/linux/mfd/zl3073x-regs.h |  22 +++
 include/linux/mfd/zl3073x.h      | 153 +++++++++++++++++++
 4 files changed, 463 insertions(+)

diff --git a/drivers/mfd/zl3073x-core.c b/drivers/mfd/zl3073x-core.c
index a12cfc7eb6ff..127e240a143d 100644
--- a/drivers/mfd/zl3073x-core.c
+++ b/drivers/mfd/zl3073x-core.c
@@ -6,6 +6,7 @@
 #include <linux/dev_printk.h>
 #include <linux/device.h>
 #include <linux/export.h>
+#include <linux/math64.h>
 #include <linux/mfd/zl3073x.h>
 #include <linux/module.h>
 #include <linux/netlink.h>
@@ -504,6 +505,251 @@ void zl3073x_dev_init_regmap_config(struct regmap_config *regmap_cfg)
 }
 EXPORT_SYMBOL_NS_GPL(zl3073x_dev_init_regmap_config, "ZL3073X");
 
+int zl3073x_mb_op(struct zl3073x_dev *zldev, unsigned int op_reg, u8 op_val,
+		  unsigned int mask_reg, u16 mask_val)
+{
+	int rc;
+
+	/* Set mask for the operation */
+	rc = zl3073x_write_u16(zldev, mask_reg, mask_val);
+	if (rc)
+		return rc;
+
+	/* Trigger the operation */
+	rc = zl3073x_write_u8(zldev, op_reg, op_val);
+	if (rc)
+		return rc;
+
+	/* Wait for the operation to actually finish */
+	return zl3073x_poll_zero_u8(zldev, op_reg, op_val);
+}
+EXPORT_SYMBOL_NS_GPL(zl3073x_mb_op, "ZL3073X");
+
+/**
+ * zl3073x_input_state_fetch - get input state
+ * @zldev: pointer to zl3073x_dev structure
+ * @index: input pin index to fetch state for
+ *
+ * Function fetches information for the given input reference that are
+ * invariant and stores them for later use.
+ *
+ * Return: 0 on success, <0 on error
+ */
+static int
+zl3073x_input_state_fetch(struct zl3073x_dev *zldev, u8 index)
+{
+	struct zl3073x_input *input;
+	u8 ref_config;
+	int rc;
+
+	input = &zldev->input[index];
+
+	/* If the input is differential then the configuration for N-pin
+	 * reference is ignored and P-pin config is used for both.
+	 */
+	if (zl3073x_is_n_pin(index) &&
+	    zl3073x_input_is_diff(zldev, index - 1)) {
+		input->enabled = zl3073x_input_is_enabled(zldev, index - 1);
+		input->diff = true;
+
+		return 0;
+	}
+
+	guard(mutex)(&zldev->multiop_lock);
+
+	/* Read reference configuration */
+	rc = zl3073x_mb_op(zldev, ZL_REG_REF_MB_SEM, ZL_REF_MB_SEM_RD,
+			   ZL_REG_REF_MB_MASK, BIT(index));
+	if (rc)
+		return rc;
+
+	/* Read ref_config register */
+	rc = zl3073x_read_u8(zldev, ZL_REG_REF_CONFIG, &ref_config);
+	if (rc)
+		return rc;
+
+	input->enabled = FIELD_GET(ZL_REF_CONFIG_ENABLE, ref_config);
+	input->diff = FIELD_GET(ZL_REF_CONFIG_DIFF_EN, ref_config);
+
+	dev_dbg(zldev->dev, "INPUT%u is %s and configured as %s\n", index,
+		input->enabled ? "enabled" : "disabled",
+		input->diff ? "differential" : "single-ended");
+
+	return rc;
+}
+
+/**
+ * zl3073x_output_state_fetch - get output state
+ * @zldev: pointer to zl3073x_dev structure
+ * @index: output index to fetch state for
+ *
+ * Function fetches information for the given output (not output pin)
+ * that are invariant and stores them for later use.
+ *
+ * Return: 0 on success, <0 on error
+ */
+static int
+zl3073x_output_state_fetch(struct zl3073x_dev *zldev, u8 index)
+{
+	struct zl3073x_output *output;
+	u8 output_ctrl, output_mode;
+	int rc;
+
+	output = &zldev->output[index];
+
+	/* Read output configuration */
+	rc = zl3073x_read_u8(zldev, ZL_REG_OUTPUT_CTRL(index), &output_ctrl);
+	if (rc)
+		return rc;
+
+	/* Store info about output enablement and synthesizer the output
+	 * is connected to.
+	 */
+	output->enabled = FIELD_GET(ZL_OUTPUT_CTRL_EN, output_ctrl);
+	output->synth = FIELD_GET(ZL_OUTPUT_CTRL_SYNTH_SEL, output_ctrl);
+
+	dev_dbg(zldev->dev, "OUTPUT%u is %s, connected to SYNTH%u\n",
+		index, output->enabled ? "enabled" : "disabled", output->synth);
+
+	guard(mutex)(&zldev->multiop_lock);
+
+	/* Read output configuration */
+	rc = zl3073x_mb_op(zldev, ZL_REG_OUTPUT_MB_SEM, ZL_OUTPUT_MB_SEM_RD,
+			   ZL_REG_OUTPUT_MB_MASK, BIT(index));
+	if (rc)
+		return rc;
+
+	/* Read output_mode */
+	rc = zl3073x_read_u8(zldev, ZL_REG_OUTPUT_MODE, &output_mode);
+	if (rc)
+		return rc;
+
+	/* Extract and store output signal format */
+	output->signal_format = FIELD_GET(ZL_OUTPUT_MODE_SIGNAL_FORMAT,
+					  output_mode);
+
+	dev_dbg(zldev->dev, "OUTPUT%u has signal format 0x%02x\n", index,
+		output->signal_format);
+
+	return rc;
+}
+
+/**
+ * zl3073x_synth_state_fetch - get synth state
+ * @zldev: pointer to zl3073x_dev structure
+ * @index: synth index to fetch state for
+ *
+ * Function fetches information for the given synthesizer that are
+ * invariant and stores them for later use.
+ *
+ * Return: 0 on success, <0 on error
+ */
+static int
+zl3073x_synth_state_fetch(struct zl3073x_dev *zldev, u8 index)
+{
+	u16 base, num, denom;
+	u8 synth_ctrl;
+	u32 mult;
+	int rc;
+
+	/* Read synth control register */
+	rc = zl3073x_read_u8(zldev, ZL_REG_SYNTH_CTRL(index), &synth_ctrl);
+	if (rc)
+		return rc;
+
+	/* Extract and store DPLL channel the synth is driven by */
+	zldev->synth[index].dpll = FIELD_GET(ZL_SYNTH_CTRL_DPLL_SEL,
+					     synth_ctrl);
+
+	dev_dbg(zldev->dev, "SYNTH%u is connected to DPLL%u\n", index,
+		zldev->synth[index].dpll);
+
+	guard(mutex)(&zldev->multiop_lock);
+
+	/* Read synth configuration */
+	rc = zl3073x_mb_op(zldev, ZL_REG_SYNTH_MB_SEM, ZL_SYNTH_MB_SEM_RD,
+			   ZL_REG_SYNTH_MB_MASK, BIT(index));
+	if (rc)
+		return rc;
+
+	/* The output frequency is determined by the following formula:
+	 * base * multiplier * numerator / denominator
+	 *
+	 * Read registers with these values
+	 */
+	rc = zl3073x_read_u16(zldev, ZL_REG_SYNTH_FREQ_BASE, &base);
+	if (rc)
+		return rc;
+
+	rc = zl3073x_read_u32(zldev, ZL_REG_SYNTH_FREQ_MULT, &mult);
+	if (rc)
+		return rc;
+
+	rc = zl3073x_read_u16(zldev, ZL_REG_SYNTH_FREQ_M, &num);
+	if (rc)
+		return rc;
+
+	rc = zl3073x_read_u16(zldev, ZL_REG_SYNTH_FREQ_N, &denom);
+	if (rc)
+		return rc;
+
+	/* Check denominator for zero to avoid div by 0 */
+	if (!denom) {
+		dev_err(zldev->dev,
+			"Zero divisor for SYNTH%u retrieved from device\n",
+			index);
+		return -EINVAL;
+	}
+
+	/* Compute and store synth frequency */
+	zldev->synth[index].freq = mul_u64_u32_div(mul_u32_u32(base, mult),
+						   num, denom);
+
+	dev_dbg(zldev->dev, "SYNTH%u frequency: %llu Hz\n", index,
+		zldev->synth[index].freq);
+
+	return rc;
+}
+
+static int
+zl3073x_dev_state_fetch(struct zl3073x_dev *zldev)
+{
+	int rc;
+	u8 i;
+
+	for (i = 0; i < ZL3073X_NUM_INPUTS; i++) {
+		rc = zl3073x_input_state_fetch(zldev, i);
+		if (rc) {
+			dev_err(zldev->dev,
+				"Failed to fetch input state: %pe\n",
+				ERR_PTR(rc));
+			return rc;
+		}
+	}
+
+	for (i = 0; i < ZL3073X_NUM_SYNTHS; i++) {
+		rc = zl3073x_synth_state_fetch(zldev, i);
+		if (rc) {
+			dev_err(zldev->dev,
+				"Failed to fetch synth state: %pe\n",
+				ERR_PTR(rc));
+			return rc;
+		}
+	}
+
+	for (i = 0; i < ZL3073X_NUM_OUTPUTS; i++) {
+		rc = zl3073x_output_state_fetch(zldev, i);
+		if (rc) {
+			dev_err(zldev->dev,
+				"Failed to fetch output state: %pe\n",
+				ERR_PTR(rc));
+			return rc;
+		}
+	}
+
+	return rc;
+}
+
 static void zl3073x_devlink_unregister(void *ptr)
 {
 	devlink_unregister(ptr);
@@ -571,6 +817,11 @@ int zl3073x_dev_probe(struct zl3073x_dev *zldev,
 		return dev_err_probe(zldev->dev, rc,
 				     "Failed to initialize mutex\n");
 
+	/* Fetch device state */
+	rc = zl3073x_dev_state_fetch(zldev);
+	if (rc)
+		return rc;
+
 	/* Register the device as devlink device */
 	devlink = priv_to_devlink(zldev);
 	devlink_register(devlink);
diff --git a/drivers/mfd/zl3073x-regs.h b/drivers/mfd/zl3073x-regs.h
index 6bb7ea1ef0b5..dcd278acab4b 100644
--- a/drivers/mfd/zl3073x-regs.h
+++ b/drivers/mfd/zl3073x-regs.h
@@ -14,4 +14,41 @@
 #define ZL_REG_FW_VER				ZL_REG(0, 0x05, 2)
 #define ZL_REG_CUSTOM_CONFIG_VER		ZL_REG(0, 0x07, 4)
 
+/***********************************
+ * Register Page 9, Synth and Output
+ ***********************************/
+
+#define ZL_REG_SYNTH_CTRL(_idx)						\
+	ZL_REG_IDX(_idx, 9, 0x00, 1, ZL3073X_NUM_SYNTHS, 1)
+#define ZL_SYNTH_CTRL_EN			BIT(0)
+#define ZL_SYNTH_CTRL_DPLL_SEL			GENMASK(6, 4)
+
+#define ZL_REG_OUTPUT_CTRL(_idx)					\
+	ZL_REG_IDX(_idx, 9, 0x28, 1, ZL3073X_NUM_OUTPUTS, 1)
+#define ZL_OUTPUT_CTRL_EN			BIT(0)
+#define ZL_OUTPUT_CTRL_SYNTH_SEL		GENMASK(6, 4)
+
+/*******************************
+ * Register Page 10, Ref Mailbox
+ *******************************/
+
+#define ZL_REG_REF_CONFIG			ZL_REG(10, 0x0d, 1)
+#define ZL_REF_CONFIG_ENABLE			BIT(0)
+#define ZL_REF_CONFIG_DIFF_EN			BIT(2)
+
+/*********************************
+ * Register Page 13, Synth Mailbox
+ *********************************/
+
+#define ZL_REG_SYNTH_MB_MASK			ZL_REG(13, 0x02, 2)
+
+#define ZL_REG_SYNTH_MB_SEM			ZL_REG(13, 0x04, 1)
+#define ZL_SYNTH_MB_SEM_WR			BIT(0)
+#define ZL_SYNTH_MB_SEM_RD			BIT(1)
+
+#define ZL_REG_SYNTH_FREQ_BASE			ZL_REG(13, 0x06, 2)
+#define ZL_REG_SYNTH_FREQ_MULT			ZL_REG(13, 0x08, 4)
+#define ZL_REG_SYNTH_FREQ_M			ZL_REG(13, 0x0c, 2)
+#define ZL_REG_SYNTH_FREQ_N			ZL_REG(13, 0x0e, 2)
+
 #endif /* __ZL3073X_REGS_H */
diff --git a/include/linux/mfd/zl3073x-regs.h b/include/linux/mfd/zl3073x-regs.h
index cd2baed244eb..d94bd389f9a7 100644
--- a/include/linux/mfd/zl3073x-regs.h
+++ b/include/linux/mfd/zl3073x-regs.h
@@ -63,4 +63,26 @@
 #define ZL_REG(_page, _offset, _size)					\
 	ZL_REG_IDX(0, _page, _offset, _size, 1, 0)
 
+/*******************************
+ * Register Page 10, Ref Mailbox
+ *******************************/
+
+#define ZL_REG_REF_MB_MASK			ZL_REG(10, 0x02, 2)
+
+#define ZL_REG_REF_MB_SEM			ZL_REG(10, 0x04, 1)
+#define ZL_REF_MB_SEM_WR			BIT(0)
+#define ZL_REF_MB_SEM_RD			BIT(1)
+
+/**********************************
+ * Register Page 14, Output Mailbox
+ **********************************/
+#define ZL_REG_OUTPUT_MB_MASK			ZL_REG(14, 0x02, 2)
+
+#define ZL_REG_OUTPUT_MB_SEM			ZL_REG(14, 0x04, 1)
+#define ZL_OUTPUT_MB_SEM_WR			BIT(0)
+#define ZL_OUTPUT_MB_SEM_RD			BIT(1)
+
+#define ZL_REG_OUTPUT_MODE			ZL_REG(14, 0x05, 1)
+#define ZL_OUTPUT_MODE_SIGNAL_FORMAT		GENMASK(7, 4)
+
 #endif /* __LINUX_MFD_ZL3073X_REGS_H */
diff --git a/include/linux/mfd/zl3073x.h b/include/linux/mfd/zl3073x.h
index a42a275577c4..ca78ab6600f6 100644
--- a/include/linux/mfd/zl3073x.h
+++ b/include/linux/mfd/zl3073x.h
@@ -9,22 +9,71 @@
 struct device;
 struct regmap;
 
+/*
+ * Hardware limits for ZL3073x chip family
+ */
+#define ZL3073X_NUM_INPUTS	10
+#define ZL3073X_NUM_OUTPUTS	10
+#define ZL3073X_NUM_SYNTHS	5
+
+/**
+ * struct zl3073x_input - input invariant info
+ * @enabled: input is enabled or disabled
+ * @diff: true if input is differential
+ */
+struct zl3073x_input {
+	bool	enabled;
+	bool	diff;
+};
+
+/**
+ * struct zl3073x_output - output invariant info
+ * @enabled: output is enabled or disabled
+ * @synth: synthesizer the output is connected to
+ * @signal_format: output signal format
+ */
+struct zl3073x_output {
+	bool	enabled;
+	u8	synth;
+	u8	signal_format;
+};
+
+/**
+ * struct zl3073x_synth - synthesizer invariant info
+ * @freq: synthesizer frequency
+ * @dpll: ID of DPLL the synthesizer is driven by
+ */
+struct zl3073x_synth {
+	u64	freq;
+	u8	dpll;
+};
+
 /**
  * struct zl3073x_dev - zl3073x device
  * @dev: pointer to device
  * @regmap: regmap to access device registers
  * @multiop_lock: to serialize multiple register operations
+ * @input: array of inputs' invariants
+ * @output: array of outputs' invariants
+ * @synth: array of synthesizers' invariants
  */
 struct zl3073x_dev {
 	struct device		*dev;
 	struct regmap		*regmap;
 	struct mutex		multiop_lock;
+
+	/* Invariants */
+	struct zl3073x_input	input[ZL3073X_NUM_INPUTS];
+	struct zl3073x_output	output[ZL3073X_NUM_OUTPUTS];
+	struct zl3073x_synth	synth[ZL3073X_NUM_SYNTHS];
 };
 
 /**********************
  * Registers operations
  **********************/
 
+int zl3073x_mb_op(struct zl3073x_dev *zldev, unsigned int op_reg, u8 op_val,
+		  unsigned int mask_reg, u16 mask_val);
 int zl3073x_poll_zero_u8(struct zl3073x_dev *zldev, unsigned int reg, u8 mask);
 int zl3073x_read_u8(struct zl3073x_dev *zldev, unsigned int reg, u8 *val);
 int zl3073x_read_u16(struct zl3073x_dev *zldev, unsigned int reg, u16 *val);
@@ -35,4 +84,108 @@ int zl3073x_write_u16(struct zl3073x_dev *zldev, unsigned int reg, u16 val);
 int zl3073x_write_u32(struct zl3073x_dev *zldev, unsigned int reg, u32 val);
 int zl3073x_write_u48(struct zl3073x_dev *zldev, unsigned int reg, u64 val);
 
+static inline
+bool zl3073x_is_n_pin(u8 index)
+{
+	/* P-pins indices are even while N-pins are odd */
+	return index & 1;
+}
+
+static inline
+bool zl3073x_is_p_pin(u8 index)
+{
+	return !zl3073x_is_n_pin(index);
+}
+
+/**
+ * zl3073x_input_is_diff - check if the given input ref is differential
+ * @zldev: pointer to zl3073x device
+ * @index: output index
+ *
+ * Return: true if input is differential, false if input is single-ended
+ */
+static inline
+bool zl3073x_input_is_diff(struct zl3073x_dev *zldev, u8 index)
+{
+	return zldev->input[index].diff;
+}
+
+/**
+ * zl3073x_input_is_enabled - check if the given input ref is enabled
+ * @zldev: pointer to zl3073x device
+ * @index: input index
+ *
+ * Return: true if input is enabled, false if input is disabled
+ */
+static inline
+bool zl3073x_input_is_enabled(struct zl3073x_dev *zldev, u8 index)
+{
+	return zldev->input[index].enabled;
+}
+
+/**
+ * zl3073x_output_is_enabled - check if the given output is enabled
+ * @zldev: pointer to zl3073x device
+ * @index: output index
+ *
+ * Return: true if output is enabled, false if output is disabled
+ */
+static inline
+u8 zl3073x_output_is_enabled(struct zl3073x_dev *zldev, u8 index)
+{
+	return zldev->output[index].enabled;
+}
+
+/**
+ * zl3073x_output_signal_format_get - get output signal format
+ * @zldev: pointer to zl3073x device
+ * @index: output index
+ *
+ * Return: signal format of given output
+ */
+static inline
+u8 zl3073x_output_signal_format_get(struct zl3073x_dev *zldev, u8 index)
+{
+	return zldev->output[index].signal_format;
+}
+
+/**
+ * zl3073x_output_synth_get - get synth connected to given output
+ * @zldev: pointer to zl3073x device
+ * @index: output index
+ *
+ * Return: index of synth connected to given output.
+ */
+static inline
+u8 zl3073x_output_synth_get(struct zl3073x_dev *zldev, u8 index)
+{
+	return zldev->output[index].synth;
+}
+
+/**
+ * zl3073x_synth_dpll_get - get DPLL ID the synth is driven by
+ * @zldev: pointer to zl3073x device
+ * @index: synth index
+ *
+ * Return: ID of DPLL the given synthetizer is driven by
+ */
+static inline
+u64 zl3073x_synth_dpll_get(struct zl3073x_dev *zldev, u8 index)
+{
+	return zldev->synth[index].dpll;
+}
+
+/**
+ * zl3073x_synth_freq_get - get synth current freq
+ * @zldev: pointer to zl3073x device
+ * @index: synth index
+ *
+ * Return: frequency of given synthetizer
+ */
+static inline
+u64 zl3073x_synth_freq_get(struct zl3073x_dev *zldev, u8 index)
+{
+	return zldev->synth[index].freq;
+}
+
 #endif /* __LINUX_MFD_ZL3073X_H */
-- 
2.49.0

[PATCH net-next v8 7/8] mfd: zl3073x: Add clock_id field

[Ivan Vecera]

Add .clock_id to zl3073x_dev structure that will be used by later
commits introducing DPLL driver. The clock ID is required for DPLL
device registration.
To generate this ID, use chip ID read during device initialization.
In case where multiple zl3073x based chips are present, the chip ID
is shifted and lower bits are filled by an unique value - using
the I2C device address for I2C connections and the chip-select value
for SPI connections.

Signed-off-by: Ivan Vecera <ivecera@redhat.com>
v7->v8:
* no change
v6->v7:
* no change
v5->v6:
* no change
---
 drivers/mfd/zl3073x-core.c  | 6 +++++-
 drivers/mfd/zl3073x-i2c.c   | 4 +++-
 drivers/mfd/zl3073x-spi.c   | 4 +++-
 drivers/mfd/zl3073x.h       | 2 +-
 include/linux/mfd/zl3073x.h | 2 ++
 5 files changed, 14 insertions(+), 4 deletions(-)

diff --git a/drivers/mfd/zl3073x-core.c b/drivers/mfd/zl3073x-core.c
index 127e240a143d..0bea696a46b8 100644
--- a/drivers/mfd/zl3073x-core.c
+++ b/drivers/mfd/zl3073x-core.c
@@ -759,13 +759,14 @@ static void zl3073x_devlink_unregister(void *ptr)
  * zl3073x_dev_probe - initialize zl3073x device
  * @zldev: pointer to zl3073x device
  * @chip_info: chip info based on compatible
+ * @dev_id: device ID to be used as part of clock ID
  *
  * Common initialization of zl3073x device structure.
  *
  * Returns: 0 on success, <0 on error
  */
 int zl3073x_dev_probe(struct zl3073x_dev *zldev,
-		      const struct zl3073x_chip_info *chip_info)
+		      const struct zl3073x_chip_info *chip_info, u8 dev_id)
 {
 	u16 id, revision, fw_ver;
 	struct devlink *devlink;
@@ -809,6 +810,9 @@ int zl3073x_dev_probe(struct zl3073x_dev *zldev,
 		FIELD_GET(GENMASK(15, 8), cfg_ver),
 		FIELD_GET(GENMASK(7, 0), cfg_ver));
 
+	/* Use chip ID and given dev ID as clock ID */
+	zldev->clock_id = ((u64)id << 8) | dev_id;
+
 	/* Initialize mutex for operations where multiple reads, writes
 	 * and/or polls are required to be done atomically.
 	 */
diff --git a/drivers/mfd/zl3073x-i2c.c b/drivers/mfd/zl3073x-i2c.c
index da8bbd702d76..e00277f87de9 100644
--- a/drivers/mfd/zl3073x-i2c.c
+++ b/drivers/mfd/zl3073x-i2c.c
@@ -27,7 +27,9 @@ static int zl3073x_i2c_probe(struct i2c_client *client)
 		return PTR_ERR(zldev->regmap);
 	}
 
-	return zl3073x_dev_probe(zldev, i2c_get_match_data(client));
+	/* Initialize device and use I2C address as dev ID */
+	return zl3073x_dev_probe(zldev, i2c_get_match_data(client),
+				 client->addr);
 }
 
 static const struct i2c_device_id zl3073x_i2c_id[] = {
diff --git a/drivers/mfd/zl3073x-spi.c b/drivers/mfd/zl3073x-spi.c
index 962b6845c032..368001ae19db 100644
--- a/drivers/mfd/zl3073x-spi.c
+++ b/drivers/mfd/zl3073x-spi.c
@@ -27,7 +27,9 @@ static int zl3073x_spi_probe(struct spi_device *spi)
 		return PTR_ERR(zldev->regmap);
 	}
 
-	return zl3073x_dev_probe(zldev, spi_get_device_match_data(spi));
+	/* Initialize device and use SPI chip select value as dev ID */
+	return zl3073x_dev_probe(zldev, spi_get_device_match_data(spi),
+				 spi_get_chipselect(spi, 0));
 }
 
 static const struct spi_device_id zl3073x_spi_id[] = {
diff --git a/drivers/mfd/zl3073x.h b/drivers/mfd/zl3073x.h
index 3a2fea61cf57..abd1ab9a56de 100644
--- a/drivers/mfd/zl3073x.h
+++ b/drivers/mfd/zl3073x.h
@@ -26,6 +26,6 @@ extern const struct zl3073x_chip_info zl3073x_chip_info[];
 struct zl3073x_dev *zl3073x_devm_alloc(struct device *dev);
 void zl3073x_dev_init_regmap_config(struct regmap_config *regmap_cfg);
 int zl3073x_dev_probe(struct zl3073x_dev *zldev,
-		      const struct zl3073x_chip_info *chip_info);
+		      const struct zl3073x_chip_info *chip_info, u8 dev_id);
 
 #endif /* __ZL3073X_CORE_H */
diff --git a/include/linux/mfd/zl3073x.h b/include/linux/mfd/zl3073x.h
index ca78ab6600f6..4dc68013b69f 100644
--- a/include/linux/mfd/zl3073x.h
+++ b/include/linux/mfd/zl3073x.h
@@ -53,6 +53,7 @@ struct zl3073x_synth {
  * @dev: pointer to device
  * @regmap: regmap to access device registers
  * @multiop_lock: to serialize multiple register operations
+ * @clock_id: clock id of the device
  * @input: array of inputs' invariants
  * @output: array of outputs' invariants
  * @synth: array of synthesizers' invariants
@@ -61,6 +62,7 @@ struct zl3073x_dev {
 	struct device		*dev;
 	struct regmap		*regmap;
 	struct mutex		multiop_lock;
+	u64			clock_id;
 
 	/* Invariants */
 	struct zl3073x_input	input[ZL3073X_NUM_INPUTS];
-- 
2.49.0

[PATCH net-next v8 8/8] mfd: zl3073x: Register DPLL sub-device during init

[Ivan Vecera]

Register DPLL sub-devices to expose the functionality provided
by ZL3073x chip family. Each sub-device represents one of
the available DPLL channels.

Signed-off-by: Ivan Vecera <ivecera@redhat.com>
---
v7->v8:
* replaced zl3073x_pdata array ZL3073X_PDATA macro
v6->v7:
* use platform data to pass the channel to use
v4->v6:
* no change
v3->v4:
* use static mfd cells
---
 drivers/mfd/zl3073x-core.c  | 27 +++++++++++++++++++++++++++
 include/linux/mfd/zl3073x.h |  9 +++++++++
 2 files changed, 36 insertions(+)

diff --git a/drivers/mfd/zl3073x-core.c b/drivers/mfd/zl3073x-core.c
index 0bea696a46b8..7b140b614a63 100644
--- a/drivers/mfd/zl3073x-core.c
+++ b/drivers/mfd/zl3073x-core.c
@@ -7,6 +7,7 @@
 #include <linux/device.h>
 #include <linux/export.h>
 #include <linux/math64.h>
+#include <linux/mfd/core.h>
 #include <linux/mfd/zl3073x.h>
 #include <linux/module.h>
 #include <linux/netlink.h>
@@ -755,6 +756,23 @@ static void zl3073x_devlink_unregister(void *ptr)
 	devlink_unregister(ptr);
 }
 
+#define ZL3073X_PDATA(_channel)			\
+	(&(const struct zl3073x_pdata) {	\
+		.channel = _channel,		\
+	})
+
+#define ZL3073X_CELL(_name, _channel)				\
+	MFD_CELL_BASIC(_name, NULL, ZL3073X_PDATA(_channel),	\
+		       sizeof(struct zl3073x_pdata), 0)
+
+static const struct mfd_cell zl3073x_devs[] = {
+	ZL3073X_CELL("zl3073x-dpll", 0),
+	ZL3073X_CELL("zl3073x-dpll", 1),
+	ZL3073X_CELL("zl3073x-dpll", 2),
+	ZL3073X_CELL("zl3073x-dpll", 3),
+	ZL3073X_CELL("zl3073x-dpll", 4),
+};
+
 /**
  * zl3073x_dev_probe - initialize zl3073x device
  * @zldev: pointer to zl3073x device
@@ -826,6 +844,15 @@ int zl3073x_dev_probe(struct zl3073x_dev *zldev,
 	if (rc)
 		return rc;
 
+	/* Add DPLL sub-device cell for each DPLL channel */
+	rc = devm_mfd_add_devices(zldev->dev, PLATFORM_DEVID_AUTO, zl3073x_devs,
+				  chip_info->num_channels, NULL, 0, NULL);
+	if (rc) {
+		dev_err_probe(zldev->dev, rc,
+			      "Failed to add DPLL sub-device\n");
+		return rc;
+	}
+
 	/* Register the device as devlink device */
 	devlink = priv_to_devlink(zldev);
 	devlink_register(devlink);
diff --git a/include/linux/mfd/zl3073x.h b/include/linux/mfd/zl3073x.h
index 4dc68013b69f..cf4663cab72a 100644
--- a/include/linux/mfd/zl3073x.h
+++ b/include/linux/mfd/zl3073x.h
@@ -12,6 +12,7 @@ struct regmap;
 /*
  * Hardware limits for ZL3073x chip family
  */
+#define ZL3073X_MAX_CHANNELS	5
 #define ZL3073X_NUM_INPUTS	10
 #define ZL3073X_NUM_OUTPUTS	10
 #define ZL3073X_NUM_SYNTHS	5
@@ -48,6 +49,14 @@ struct zl3073x_synth {
 	u8	dpll;
 };
 
+/**
+ * struct zl3073x_pdata - zl3073x sub-device platform data
+ * @channel: channel to use
+ */
+struct zl3073x_pdata {
+	u8	channel;
+};
+
 /**
  * struct zl3073x_dev - zl3073x device
  * @dev: pointer to device
-- 
2.49.0

Re: [PATCH net-next v8 0/8] Add Microchip ZL3073x support (part 1)

[Ivan Vecera]

On 07. 05. 25 5:24 odp., Ivan Vecera wrote:
> Add support for Microchip Azurite DPLL/PTP/SyncE chip family that
> provides DPLL and PTP functionality. This series bring first part
> that adds the common MFD driver that provides an access to the bus
> that can be either I2C or SPI.
> 
> The next part of the series is bringing the DPLL driver that will
> covers DPLL functionality. Another series will bring PTP driver and
> flashing capability via devlink in the MFD driver will follow soon.
> 
> Testing was done by myself and by Prathosh Satish on Microchip EDS2
> development board with ZL30732 DPLL chip connected over I2C bus.
> 
> Patch breakdown
> ===============
> Patch 1 - Common DT schema for DPLL device and pin
> Patch 2 - DT bindings for microchip,zl3073* devices
> Patch 3 - Basic support for I2C, SPI and regmap configuration
> Patch 4 - Devlink device registration and info
> Patch 5 - Helpers for reading and writing register mailboxes
> Patch 6 - Fetch invariant register values used by DPLL/PTP sub-drivers
> Patch 7 - Clock ID generation for DPLL driver
> Patch 8 - Register/create DPLL device cells
> 
> ---
> v7->v8:
> * replaced zl3073x_pdata array ZL3073X_PDATA macro in patch 8
> v6->v7:
> * pass channel number using platform data instead of mfd_cell->id
> v5->v6:
> * fixed devlink info firmware version to be running instead of fixed
> * added documentation for devlink info versions
> v4->v5:
> * fixed DT patches description
> * dropped mailbox API
> * added type-safe register access functions
> * added an ability to protect multi-op accesses
> v3->v4:
> * fixed shortcomings in DT patches
> * completely reworked register access
> * removed a need to manage locking during mailbox accesses by callers
> * regcache switched to maple
> * dev_err_probe() in probe path
> * static mfd cells during sub-devices registration
> v1->v3:
> * dropped macros for generating register access functions
> * register access functions are provided in <linux/mfd/zl3073x_regs.h>
> * fixed DT descriptions and compatible wildcard usage
> * reworked regmap locking
>    - regmap uses implicit locking
>    - mailbox registers are additionally protected by extra mutex
> * fixed regmap virtual address range
> * added regmap rbtree cache (only for page selector now)
> * dropped patches for exporting strnchrnul and for supporting mfg file
>    this will be maybe added later
> 
> Ivan Vecera (8):
>    dt-bindings: dpll: Add DPLL device and pin
>    dt-bindings: dpll: Add support for Microchip Azurite chip family
>    mfd: Add Microchip ZL3073x support
>    mfd: zl3073x: Add support for devlink device info
>    mfd: zl3073x: Protect operations requiring multiple register accesses
>    mfd: zl3073x: Fetch invariants during probe
>    mfd: zl3073x: Add clock_id field
>    mfd: zl3073x: Register DPLL sub-device during init
> 
>   .../devicetree/bindings/dpll/dpll-device.yaml |  76 ++
>   .../devicetree/bindings/dpll/dpll-pin.yaml    |  45 +
>   .../bindings/dpll/microchip,zl30731.yaml      | 115 +++
>   Documentation/networking/devlink/index.rst    |   1 +
>   Documentation/networking/devlink/zl3073x.rst  |  37 +
>   MAINTAINERS                                   |  11 +
>   drivers/mfd/Kconfig                           |  32 +
>   drivers/mfd/Makefile                          |   5 +
>   drivers/mfd/zl3073x-core.c                    | 872 ++++++++++++++++++
>   drivers/mfd/zl3073x-i2c.c                     |  68 ++
>   drivers/mfd/zl3073x-regs.h                    |  54 ++
>   drivers/mfd/zl3073x-spi.c                     |  68 ++
>   drivers/mfd/zl3073x.h                         |  31 +
>   include/linux/mfd/zl3073x-regs.h              |  88 ++
>   include/linux/mfd/zl3073x.h                   | 202 ++++
>   15 files changed, 1705 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/dpll/dpll-device.yaml
>   create mode 100644 Documentation/devicetree/bindings/dpll/dpll-pin.yaml
>   create mode 100644 Documentation/devicetree/bindings/dpll/microchip,zl30731.yaml
>   create mode 100644 Documentation/networking/devlink/zl3073x.rst
>   create mode 100644 drivers/mfd/zl3073x-core.c
>   create mode 100644 drivers/mfd/zl3073x-i2c.c
>   create mode 100644 drivers/mfd/zl3073x-regs.h
>   create mode 100644 drivers/mfd/zl3073x-spi.c
>   create mode 100644 drivers/mfd/zl3073x.h
>   create mode 100644 include/linux/mfd/zl3073x-regs.h
>   create mode 100644 include/linux/mfd/zl3073x.h

I apologize for this quick update not respecting the 24 hour grace
period, I was not aware of such rule and otherwise I would not have been
able to send the v8 before Monday.

Ivan

Re: [PATCH net-next v8 1/8] dt-bindings: dpll: Add DPLL device and pin

[Krzysztof Kozlowski]

On 07/05/2025 17:24, Ivan Vecera wrote:
> Add a common DT schema for DPLL device and its associated pins.
> The DPLL (device phase-locked loop) is a device used for precise clock
> synchronization in networking and telecom hardware.
> 
> The device includes one or more DPLLs (channels) and one or more
> physical input/output pins.
> 
One patchset per 24h. You already sent it today and immediately send
next version without giving time for any actual review.

Best regards,
Krzysztof

Re: [PATCH net-next v8 1/8] dt-bindings: dpll: Add DPLL device and pin

[Lee Jones]

On Thu, 08 May 2025, Krzysztof Kozlowski wrote:

> On 07/05/2025 17:24, Ivan Vecera wrote:
> > Add a common DT schema for DPLL device and its associated pins.
> > The DPLL (device phase-locked loop) is a device used for precise clock
> > synchronization in networking and telecom hardware.
> > 
> > The device includes one or more DPLLs (channels) and one or more
> > physical input/output pins.
> > 
> One patchset per 24h. You already sent it today and immediately send
> next version without giving time for any actual review.

I just came by to say exactly the same.

There is no rush.  Please slow down.

This is not going to be applied for v6.16 and there is much to discuss.

-- 
Lee Jones [李琼斯]