Re: [PATCH v3 05/12] iio: accel: adxl313: add function to enable measurement

[Jonathan Cameron <jic23@kernel.org>]

On Fri, 23 May 2025 22:35:16 +0000
Lothar Rubusch <l.rubusch@gmail.com> wrote:

> Add a function to enable measurement. The data-sheet recomments turning of
> measurement while modifying certain config registers. This is a preparatory
> step.
> 
> Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
> ---
>  drivers/iio/accel/adxl313.h      |  3 +--
>  drivers/iio/accel/adxl313_core.c | 10 +++++++---
>  2 files changed, 8 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/iio/accel/adxl313.h b/drivers/iio/accel/adxl313.h
> index fc937bdf83b6..9bf2facdbf87 100644
> --- a/drivers/iio/accel/adxl313.h
> +++ b/drivers/iio/accel/adxl313.h
> @@ -36,8 +36,7 @@
>  #define ADXL313_RATE_MSK		GENMASK(3, 0)
>  #define ADXL313_RATE_BASE		6
>  
> -#define ADXL313_POWER_CTL_MSK		GENMASK(3, 2)
> -#define ADXL313_MEASUREMENT_MODE	BIT(3)
> +#define ADXL313_POWER_CTL_MSK		BIT(3)
>  
>  #define ADXL313_RANGE_MSK		GENMASK(1, 0)
>  #define ADXL313_RANGE_MAX		3
> diff --git a/drivers/iio/accel/adxl313_core.c b/drivers/iio/accel/adxl313_core.c
> index 0c893c286017..6170c9daa30f 100644
> --- a/drivers/iio/accel/adxl313_core.c
> +++ b/drivers/iio/accel/adxl313_core.c
> @@ -63,6 +63,12 @@ bool adxl313_is_volatile_reg(struct device *dev, unsigned int reg)
>  }
>  EXPORT_SYMBOL_NS_GPL(adxl313_is_volatile_reg, "IIO_ADXL313");
>  
> +static int adxl313_set_measure_en(struct adxl313_data *data, bool en)
> +{
> +	return regmap_assign_bits(data->regmap, ADXL313_REG_POWER_CTL,
> +				  ADXL313_POWER_CTL_MSK, en);
> +}
> +
>  static int adxl312_check_id(struct device *dev,
>  			    struct adxl313_data *data)
>  {
> @@ -410,9 +416,7 @@ static int adxl313_setup(struct device *dev, struct adxl313_data *data,
>  	}
>  
>  	/* Enables measurement mode */
> -	return regmap_update_bits(data->regmap, ADXL313_REG_POWER_CTL,
> -				  ADXL313_POWER_CTL_MSK,
> -				  ADXL313_MEASUREMENT_MODE);
> +	return adxl313_set_measure_en(data, true);
The original code is also clearing the sleep bit.

I'd expect the patch description to have stated why no longer doing that
is fine. I guess no one ever sets it?

>  }
>  
>  /**