[PATCH 6/9] Documentation: Fix networking typos

[Bjorn Helgaas <helgaas@kernel.org>]

From: Bjorn Helgaas <bhelgaas@google.com>

Fix typos.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
---
 Documentation/networking/can.rst                                | 2 +-
 .../device_drivers/ethernet/ti/am65_nuss_cpsw_switchdev.rst     | 2 +-
 .../networking/device_drivers/ethernet/ti/cpsw_switchdev.rst    | 2 +-
 Documentation/networking/rds.rst                                | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/Documentation/networking/can.rst b/Documentation/networking/can.rst
index bc1b585355f7..680dc7451493 100644
--- a/Documentation/networking/can.rst
+++ b/Documentation/networking/can.rst
@@ -539,7 +539,7 @@ CAN Filter Usage Optimisation
 The CAN filters are processed in per-device filter lists at CAN frame
 reception time. To reduce the number of checks that need to be performed
 while walking through the filter lists the CAN core provides an optimized
-filter handling when the filter subscription focusses on a single CAN ID.
+filter handling when the filter subscription focuses on a single CAN ID.
 
 For the possible 2048 SFF CAN identifiers the identifier is used as an index
 to access the corresponding subscription list without any further checks.
diff --git a/Documentation/networking/device_drivers/ethernet/ti/am65_nuss_cpsw_switchdev.rst b/Documentation/networking/device_drivers/ethernet/ti/am65_nuss_cpsw_switchdev.rst
index 25fd9aa284e2..f0424597aac1 100644
--- a/Documentation/networking/device_drivers/ethernet/ti/am65_nuss_cpsw_switchdev.rst
+++ b/Documentation/networking/device_drivers/ethernet/ti/am65_nuss_cpsw_switchdev.rst
@@ -42,7 +42,7 @@ Port's netdev devices have to be in UP before joining to the bridge to avoid
 overwriting of bridge configuration as CPSW switch driver completely reloads its
 configuration when first port changes its state to UP.
 
-When the both interfaces joined the bridge - CPSW switch driver will enable
+When both interfaces have joined the bridge - CPSW switch driver will enable
 marking packets with offload_fwd_mark flag.
 
 All configuration is implemented via switchdev API.
diff --git a/Documentation/networking/device_drivers/ethernet/ti/cpsw_switchdev.rst b/Documentation/networking/device_drivers/ethernet/ti/cpsw_switchdev.rst
index 464dce938ed1..2f3c43a32bfc 100644
--- a/Documentation/networking/device_drivers/ethernet/ti/cpsw_switchdev.rst
+++ b/Documentation/networking/device_drivers/ethernet/ti/cpsw_switchdev.rst
@@ -92,7 +92,7 @@ Port's netdev devices have to be in UP before joining to the bridge to avoid
 overwriting of bridge configuration as CPSW switch driver copletly reloads its
 configuration when first Port changes its state to UP.
 
-When the both interfaces joined the bridge - CPSW switch driver will enable
+When both interfaces have joined the bridge - CPSW switch driver will enable
 marking packets with offload_fwd_mark flag unless "ale_bypass=0"
 
 All configuration is implemented via switchdev API.
diff --git a/Documentation/networking/rds.rst b/Documentation/networking/rds.rst
index 41b0a6182fe4..4261146e9d92 100644
--- a/Documentation/networking/rds.rst
+++ b/Documentation/networking/rds.rst
@@ -339,7 +339,7 @@ The send path
   rds_sendmsg()
     - struct rds_message built from incoming data
     - CMSGs parsed (e.g. RDMA ops)
-    - transport connection alloced and connected if not already
+    - transport connection allocated and connected if not already
     - rds_message placed on send queue
     - send worker awoken
 
-- 
2.43.0