[PATCHv4 net-next 3/3] selftests: bonding: add test for LACP actor port priority

[Hangbin Liu <liuhangbin@gmail.com>]

Add comprehensive selftest to verify:
- Per-port actor priority setting via ad_actor_port_prio
- Aggregator selection behavior with port_priority ad_select policy

Also move cmd_jq helper from forwarding/lib.sh to net/lib.sh for
broader reusability across network selftests.

Here is the result output
  # ./bond_lacp_prio.sh
  TEST: bond 802.3ad (ad_actor_port_prio setting)                  [ OK ]
  TEST: bond 802.3ad (ad_actor_port_prio select)                   [ OK ]
  TEST: bond 802.3ad (ad_actor_port_prio switch)                   [ OK ]

Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
---
 .../selftests/drivers/net/bonding/Makefile    |   3 +-
 .../drivers/net/bonding/bond_lacp_prio.sh     | 107 ++++++++++++++++++
 tools/testing/selftests/net/forwarding/lib.sh |  24 ----
 tools/testing/selftests/net/lib.sh            |  24 ++++
 4 files changed, 133 insertions(+), 25 deletions(-)
 create mode 100755 tools/testing/selftests/drivers/net/bonding/bond_lacp_prio.sh

diff --git a/tools/testing/selftests/drivers/net/bonding/Makefile b/tools/testing/selftests/drivers/net/bonding/Makefile
index 44b98f17f8ff..3462783ed3ac 100644
--- a/tools/testing/selftests/drivers/net/bonding/Makefile
+++ b/tools/testing/selftests/drivers/net/bonding/Makefile
@@ -11,7 +11,8 @@ TEST_PROGS := \
 	bond_options.sh \
 	bond-eth-type-change.sh \
 	bond_macvlan_ipvlan.sh \
-	bond_passive_lacp.sh
+	bond_passive_lacp.sh \
+	bond_lacp_prio.sh
 
 TEST_FILES := \
 	lag_lib.sh \
diff --git a/tools/testing/selftests/drivers/net/bonding/bond_lacp_prio.sh b/tools/testing/selftests/drivers/net/bonding/bond_lacp_prio.sh
new file mode 100755
index 000000000000..5d067b8ee707
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/bonding/bond_lacp_prio.sh
@@ -0,0 +1,107 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Testing if bond lacp per port priority works
+#
+#          Switch (s_ns)          Backup Switch (b_ns)
+#  +-------------------------+ +-------------------------+
+#  |          bond0          | |          bond0          |
+#  |            +            | |            +            |
+#  |      eth0  |  eth1      | |      eth0  |  eth1      |
+#  |        +---+---+        | |        +---+---+        |
+#  |        |       |        | |        |       |        |
+#  +-------------------------+ +-------------------------+
+#           |       |                   |       |
+#  +-----------------------------------------------------+
+#  |        |       |                   |       |        |
+#  |        +-------+---------+---------+-------+        |
+#  |      eth0     eth1       |       eth2     eth3      |
+#  |                          +                          |
+#  |                        bond0                        |
+#  +-----------------------------------------------------+
+#                        Client (c_ns)
+
+lib_dir=$(dirname "$0")
+# shellcheck disable=SC1091
+source "$lib_dir"/../../../net/lib.sh
+
+setup_links()
+{
+	# shellcheck disable=SC2154
+	ip -n "${c_ns}" link add eth0 type veth peer name eth0 netns "${s_ns}"
+	ip -n "${c_ns}" link add eth1 type veth peer name eth1 netns "${s_ns}"
+	# shellcheck disable=SC2154
+	ip -n "${c_ns}" link add eth2 type veth peer name eth0 netns "${b_ns}"
+	ip -n "${c_ns}" link add eth3 type veth peer name eth1 netns "${b_ns}"
+
+	ip -n "${c_ns}" link add bond0 type bond mode 802.3ad miimon 100 \
+		lacp_rate fast ad_select prio
+	ip -n "${s_ns}" link add bond0 type bond mode 802.3ad miimon 100 \
+		lacp_rate fast
+	ip -n "${b_ns}" link add bond0 type bond mode 802.3ad miimon 100 \
+		lacp_rate fast
+
+	ip -n "${c_ns}" link set eth0 master bond0
+	ip -n "${c_ns}" link set eth1 master bond0
+	ip -n "${c_ns}" link set eth2 master bond0
+	ip -n "${c_ns}" link set eth3 master bond0
+	ip -n "${s_ns}" link set eth0 master bond0
+	ip -n "${s_ns}" link set eth1 master bond0
+	ip -n "${b_ns}" link set eth0 master bond0
+	ip -n "${b_ns}" link set eth1 master bond0
+
+	ip -n "${c_ns}" link set bond0 up
+	ip -n "${s_ns}" link set bond0 up
+	ip -n "${b_ns}" link set bond0 up
+}
+
+test_port_prio_setting()
+{
+	RET=0
+	ip -n "${c_ns}" link set eth0 type bond_slave actor_port_prio 1000
+	prio=$(cmd_jq "ip -n ${c_ns} -d -j link show eth0" \
+		".[].linkinfo.info_slave_data.actor_port_prio")
+	[ "$prio" -ne 1000 ] && RET=1
+	ip -n "${c_ns}" link set eth2 type bond_slave actor_port_prio 10
+	prio=$(cmd_jq "ip -n ${c_ns} -d -j link show eth2" \
+		".[].linkinfo.info_slave_data.actor_port_prio")
+	[ "$prio" -ne 10 ] && RET=1
+}
+
+test_agg_reselect()
+{
+	local bond_agg_id slave_agg_id
+	local expect_slave="$1"
+	RET=0
+
+	# Trigger link state change to reselect the aggregator
+	ip -n "${c_ns}" link set eth1 down
+	sleep 1
+	ip -n "${c_ns}" link set eth1 up
+
+	bond_agg_id=$(cmd_jq "ip -n ${c_ns} -d -j link show bond0" \
+		".[].linkinfo.info_data.ad_info.aggregator")
+	slave_agg_id=$(cmd_jq "ip -n ${c_ns} -d -j link show $expect_slave" \
+		".[].linkinfo.info_slave_data.ad_aggregator_id")
+	# shellcheck disable=SC2034
+	[ "${bond_agg_id}" -ne "${slave_agg_id}" ] && \
+		RET=1
+}
+
+trap cleanup_all_ns EXIT
+setup_ns c_ns s_ns b_ns
+setup_links
+
+test_port_prio_setting
+log_test "bond 802.3ad" "actor_port_prio setting"
+
+test_agg_reselect eth0
+log_test "bond 802.3ad" "actor_port_prio select"
+
+# Change the actor port prio and re-test
+ip -n "${c_ns}" link set eth0 type bond_slave actor_port_prio 10
+ip -n "${c_ns}" link set eth2 type bond_slave actor_port_prio 1000
+test_agg_reselect eth2
+log_test "bond 802.3ad" "actor_port_prio switch"
+
+exit "${EXIT_STATUS}"
diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh
index 890b3374dacd..08121cb9dc26 100644
--- a/tools/testing/selftests/net/forwarding/lib.sh
+++ b/tools/testing/selftests/net/forwarding/lib.sh
@@ -571,30 +571,6 @@ wait_for_dev()
         fi
 }
 
-cmd_jq()
-{
-	local cmd=$1
-	local jq_exp=$2
-	local jq_opts=$3
-	local ret
-	local output
-
-	output="$($cmd)"
-	# it the command fails, return error right away
-	ret=$?
-	if [[ $ret -ne 0 ]]; then
-		return $ret
-	fi
-	output=$(echo $output | jq -r $jq_opts "$jq_exp")
-	ret=$?
-	if [[ $ret -ne 0 ]]; then
-		return $ret
-	fi
-	echo $output
-	# return success only in case of non-empty output
-	[ ! -z "$output" ]
-}
-
 pre_cleanup()
 {
 	if [ "${PAUSE_ON_CLEANUP}" = "yes" ]; then
diff --git a/tools/testing/selftests/net/lib.sh b/tools/testing/selftests/net/lib.sh
index c7add0dc4c60..4dca6893aa8a 100644
--- a/tools/testing/selftests/net/lib.sh
+++ b/tools/testing/selftests/net/lib.sh
@@ -645,3 +645,27 @@ wait_local_port_listen()
 		sleep 0.1
 	done
 }
+
+cmd_jq()
+{
+	local cmd=$1
+	local jq_exp=$2
+	local jq_opts=$3
+	local ret
+	local output
+
+	output="$($cmd)"
+	# it the command fails, return error right away
+	ret=$?
+	if [[ $ret -ne 0 ]]; then
+		return $ret
+	fi
+	output=$(echo $output | jq -r $jq_opts "$jq_exp")
+	ret=$?
+	if [[ $ret -ne 0 ]]; then
+		return $ret
+	fi
+	echo $output
+	# return success only in case of non-empty output
+	[ ! -z "$output" ]
+}
-- 
2.50.1