[PATCH 2/5] drivers/hwmon: Add Kconfig entry for TSC1641

[Igor Reznichenko <igor@reznichenko.net>]

Add a Kconfig entry for the TSC1641 driver under the HWMON_I2C menu.
The driver can be built as a module or built-in. Default is module.

Signed-off-by: Igor Reznichenko <igor@reznichenko.net>
---
 drivers/hwmon/Kconfig | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 2760feb9f83b..b9d7b02932a6 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -2434,6 +2434,18 @@ config SENSORS_TMP513
 	  This driver can also be built as a module. If so, the module
 	  will be called tmp513.
 
+config SENSORS_TSC1641
+	tristate "ST Microelectronics TSC1641 Power Monitor"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  If you say yes here you get support for TSC1641 power  monitor chip.
+	  The TSC1641 driver is configured for the default configuration of
+	  the part except temperature is enabled by default.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called tsc1641.
+
 config SENSORS_VEXPRESS
 	tristate "Versatile Express"
 	depends on VEXPRESS_CONFIG
-- 
2.43.0