linux-doc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Igor Reznichenko <igor@reznichenko.net>
To: linux@roeck-us.net, robh@kernel.org, krzk+dt@kernel.org,
	conor+dt@kernel.org, corbet@lwn.net, skhan@linuxfoundation.org,
	david.hunter.linux@gmail.com
Cc: linux-hwmon@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org
Subject: [PATCH 5/5] Documentation/devicetree/bindings/hwmon: Add TSC1641 binding
Date: Tue, 21 Oct 2025 21:47:08 -0700	[thread overview]
Message-ID: <20251022044708.314287-6-igor@reznichenko.net> (raw)
In-Reply-To: <20251022044708.314287-1-igor@reznichenko.net>

Add a devicetree binding for the TSC1641 I2C power monitor.

Signed-off-by: Igor Reznichenko <igor@reznichenko.net>
---
 .../devicetree/bindings/hwmon/st,tsc1641.yaml | 54 +++++++++++++++++++
 1 file changed, 54 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwmon/st,tsc1641.yaml

diff --git a/Documentation/devicetree/bindings/hwmon/st,tsc1641.yaml b/Documentation/devicetree/bindings/hwmon/st,tsc1641.yaml
new file mode 100644
index 000000000000..e79f6dab4a87
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/st,tsc1641.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/st,tsc1641.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST Microelectronics TSC1641 I2C power monitor
+
+maintainers:
+  - Igor Reznichenko <igor@reznichenko.net>
+
+description: |
+  TSC1641 is a 60 V, 16-bit high-precision power monitor with I2C and MIPI I3C interface
+
+  Datasheets:
+    https://www.st.com/resource/en/datasheet/tsc1641.pdf
+
+properties:
+  compatible:
+    const: st,tsc1641
+
+  reg:
+    maxItems: 1
+
+  shunt-resistor:
+    description:
+      Shunt resistor value in micro-ohms.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  st,alert-polarity-active-high:
+    description: Default value is 0 which configures the normal polarity of the ALERT pin, being active low open-drain.
+      Setting this to 1 configures the polarity of the ALERT pin to be inverted and active high open-drain.
+      Specify this property to set the alert polarity to active-high.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        power-sensor@40 {
+            compatible = "st,tsc1641";
+            reg = <0x40>;
+            shunt-resistor = <5000>;
+            st,alert-polarity-active-high;
+        };
+    };
-- 
2.43.0


  parent reply	other threads:[~2025-10-22  4:47 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-10-22  4:47 [PATCH 0/5] hwmon: Add TSC1641 I2C power monitor driver Igor Reznichenko
2025-10-22  4:47 ` [PATCH 1/5] drivers/hwmon: " Igor Reznichenko
2025-10-22 14:51   ` Guenter Roeck
2025-10-23  7:50     ` Igor Reznichenko
2025-10-23 12:55       ` Guenter Roeck
2025-10-22  4:47 ` [PATCH 2/5] drivers/hwmon: Add Kconfig entry for TSC1641 Igor Reznichenko
2025-10-22  6:49   ` Krzysztof Kozlowski
2025-10-22  4:47 ` [PATCH 3/5] drivers/hwmon: Add TSC1641 module to Makefile Igor Reznichenko
2025-10-22  6:49   ` Krzysztof Kozlowski
2025-10-22  4:47 ` [PATCH 4/5] Documentation/hwmon: Add TSC1641 driver documentation Igor Reznichenko
2025-10-22  4:47 ` Igor Reznichenko [this message]
2025-10-22  6:29   ` [PATCH 5/5] Documentation/devicetree/bindings/hwmon: Add TSC1641 binding Rob Herring (Arm)
2025-10-22  6:48   ` Krzysztof Kozlowski
2025-10-22 14:07 ` [PATCH 0/5] hwmon: Add TSC1641 I2C power monitor driver Guenter Roeck
2025-10-26  6:50 ` [PATCH v2 0/2] " Igor Reznichenko
2025-10-26  6:50   ` [PATCH v2 1/2] dt-bindings: hwmon: Add support for ST TSC1641 power monitor Igor Reznichenko
2025-10-26 16:32     ` Krzysztof Kozlowski
2025-10-26 17:22       ` Guenter Roeck
2025-10-26 19:15         ` Krzysztof Kozlowski
2025-10-26 18:46       ` Igor Reznichenko
2025-10-26 19:41         ` Krzysztof Kozlowski
2025-10-26 19:58           ` Guenter Roeck
2025-10-27  8:40             ` Krzysztof Kozlowski
2025-10-27 16:53               ` Guenter Roeck
2025-10-27 18:01                 ` Krzysztof Kozlowski
2025-10-27 19:14                   ` Rob Herring
2025-10-28 15:17                     ` Igor Reznichenko
2025-10-28 15:33                       ` Guenter Roeck
2025-10-31  4:40                         ` Igor Reznichenko
2025-10-31  7:57                           ` Krzysztof Kozlowski
2025-10-31 17:30                             ` Igor Reznichenko
2025-10-31 18:37                               ` Guenter Roeck
2025-10-26  6:50   ` [PATCH v2 2/2] hwmon: Add TSC1641 I2C power monitor driver Igor Reznichenko
2025-10-26 17:08     ` Guenter Roeck
2025-10-27  6:41       ` Igor Reznichenko
2025-10-27 16:52         ` Guenter Roeck
2025-10-26 16:28   ` [PATCH v2 0/2] " Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20251022044708.314287-6-igor@reznichenko.net \
    --to=igor@reznichenko.net \
    --cc=conor+dt@kernel.org \
    --cc=corbet@lwn.net \
    --cc=david.hunter.linux@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=robh@kernel.org \
    --cc=skhan@linuxfoundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).