[PATCH v7 2/2] PCI: s390: Expose the UID as an arch specific PCI slot attribute

[Niklas Schnelle <schnelle@linux.ibm.com>]

On s390, an individual PCI function can generally be identified by two
identifiers, the FID and the UID. Which identifier is used depends on
the scope and the platform configuration.

The first identifier, the FID, is always available and identifies a PCI
device uniquely within a machine. The FID may be virtualized by
hypervisors, but on the LPAR level, the machine scope makes it
impossible to create the same configuration based on FIDs on two
different LPARs of the same machine, and difficult to reuse across
machines.

Such matching LPAR configurations are useful, though, allowing
standardized setups and booting a Linux installation on different LPARs.
To this end the UID, or user-defined identifier, was introduced. While
it is only guaranteed to be unique within an LPAR and only if indicated
by firmware, it allows users to replicate PCI device setups.

On s390, which uses a machine hypervisor, a per PCI function hotplug
model is used. The shortcoming with the UID then is, that it is not
visible to the user without first attaching the PCI function and
accessing the "uid" device attribute. The FID, on the other hand, is
used as the slot name and is thus known even with the PCI function in
standby.

Remedy this shortcoming by providing the UID as an attribute on the slot
allowing the user to identify a PCI function based on the UID without
having to first attach it. Do this via a macro mechanism analogous to
what was introduced by commit 265baca69a07 ("s390/pci: Stop usurping
pdev->dev.groups") for the PCI device attributes.

Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Julian Ruess <julianr@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
---
 Documentation/arch/s390/pci.rst |  7 +++++++
 arch/s390/include/asm/pci.h     |  4 ++++
 arch/s390/pci/pci_sysfs.c       | 20 ++++++++++++++++++++
 drivers/pci/slot.c              | 13 ++++++++++++-
 4 files changed, 43 insertions(+), 1 deletion(-)

diff --git a/Documentation/arch/s390/pci.rst b/Documentation/arch/s390/pci.rst
index 8cb0a1e784a7cfc5df1e04a4154ba02c9ecf46cc..a620cf694c6f6c0bbd4f77ea4768cce7cc42c963 100644
--- a/Documentation/arch/s390/pci.rst
+++ b/Documentation/arch/s390/pci.rst
@@ -58,6 +58,13 @@ Entries specific to zPCI functions and entries that hold zPCI information.
 
   - /sys/bus/pci/slots/XXXXXXXX/power
 
+  In addition to using the FID as the name of the slot, the slot directory
+  also contains the following s390-specific slot attributes.
+
+  - uid:
+    The User-defined identifier (UID) of the function which may be configured
+    by this slot. See also the corresponding attribute of the device.
+
   A physical function that currently supports a virtual function cannot be
   powered off until all virtual functions are removed with:
   echo 0 > /sys/bus/pci/devices/DDDD:BB:dd.f/sriov_numvf
diff --git a/arch/s390/include/asm/pci.h b/arch/s390/include/asm/pci.h
index c0ff19dab5807c7e1aabb48a0e9436aac45ec97d..5dcf35f0f325f5f44b28109a1c8d9aef18401035 100644
--- a/arch/s390/include/asm/pci.h
+++ b/arch/s390/include/asm/pci.h
@@ -208,6 +208,10 @@ extern const struct attribute_group zpci_ident_attr_group;
 			    &pfip_attr_group,		 \
 			    &zpci_ident_attr_group,
 
+extern const struct attribute_group zpci_slot_attr_group;
+
+#define ARCH_PCI_SLOT_GROUPS (&zpci_slot_attr_group)
+
 extern unsigned int s390_pci_force_floating __initdata;
 extern unsigned int s390_pci_no_rid;
 
diff --git a/arch/s390/pci/pci_sysfs.c b/arch/s390/pci/pci_sysfs.c
index c2444a23e26c4218832bb91930b5f0ffd498d28f..d98d97df792adb3c7e415a8d374cc2f3a65fbb52 100644
--- a/arch/s390/pci/pci_sysfs.c
+++ b/arch/s390/pci/pci_sysfs.c
@@ -187,6 +187,17 @@ static ssize_t index_show(struct device *dev,
 }
 static DEVICE_ATTR_RO(index);
 
+static ssize_t zpci_uid_slot_show(struct pci_slot *slot, char *buf)
+{
+	struct zpci_dev *zdev = container_of(slot->hotplug, struct zpci_dev,
+					     hotplug_slot);
+
+	return sysfs_emit(buf, "0x%x\n", zdev->uid);
+}
+
+static struct pci_slot_attribute zpci_slot_attr_uid =
+	__ATTR(uid, 0444, zpci_uid_slot_show, NULL);
+
 static umode_t zpci_index_is_visible(struct kobject *kobj,
 				     struct attribute *attr, int n)
 {
@@ -243,6 +254,15 @@ const struct attribute_group pfip_attr_group = {
 	.attrs = pfip_attrs,
 };
 
+static struct attribute *zpci_slot_attrs[] = {
+	&zpci_slot_attr_uid.attr,
+	NULL,
+};
+
+const struct attribute_group zpci_slot_attr_group = {
+	.attrs = zpci_slot_attrs,
+};
+
 static struct attribute *clp_fw_attrs[] = {
 	&uid_checking_attr.attr,
 	NULL,
diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c
index 787311614e5b6ebb39e7284f9b9f205a0a684d6d..2f8fcfbbec24e73d0bb6e40fd04c05a94f518045 100644
--- a/drivers/pci/slot.c
+++ b/drivers/pci/slot.c
@@ -96,7 +96,18 @@ static struct attribute *pci_slot_default_attrs[] = {
 	&pci_slot_attr_cur_speed.attr,
 	NULL,
 };
-ATTRIBUTE_GROUPS(pci_slot_default);
+
+static const struct attribute_group pci_slot_default_group = {
+	.attrs = pci_slot_default_attrs,
+};
+
+static const struct attribute_group *pci_slot_default_groups[] = {
+	&pci_slot_default_group,
+#ifdef ARCH_PCI_SLOT_GROUPS
+	ARCH_PCI_SLOT_GROUPS,
+#endif
+	NULL,
+};
 
 static const struct kobj_type pci_slot_ktype = {
 	.sysfs_ops = &pci_slot_sysfs_ops,

-- 
2.51.0