[PATCH] Documentation: Refactored watchdog old doc

[Sunny Patel <nueralspacetech@gmail.com>]

Revisited old doc of watchdog and did some cleanup.
Also added support for new api in doc.

Signed-off-by: Sunny Patel <nueralspacetech@gmail.com>
---
 Documentation/watchdog/watchdog-api.rst | 49 +++++++++++++++++++++----
 1 file changed, 41 insertions(+), 8 deletions(-)

diff --git a/Documentation/watchdog/watchdog-api.rst b/Documentation/watchdog/watchdog-api.rst
index 78e228c272cf..446f961852ec 100644
--- a/Documentation/watchdog/watchdog-api.rst
+++ b/Documentation/watchdog/watchdog-api.rst
@@ -2,7 +2,7 @@
 The Linux Watchdog driver API
 =============================
 
-Last reviewed: 10/05/2007
+Last reviewed: 04/08/2026
 
 
 
@@ -106,11 +106,10 @@ the requested one due to limitation of the hardware::
 This example might actually print "The timeout was set to 60 seconds"
 if the device has a granularity of minutes for its timeout.
 
-Starting with the Linux 2.4.18 kernel, it is possible to query the
-current timeout using the GETTIMEOUT ioctl::
+It is also possible to get the current timeout with the GETTIMEOUT ioctl::
 
     ioctl(fd, WDIOC_GETTIMEOUT, &timeout);
-    printf("The timeout was is %d seconds\n", timeout);
+    printf("The timeout is %d seconds\n", timeout);
 
 Pretimeouts
 ===========
@@ -133,7 +132,7 @@ seconds.  Setting a pretimeout to zero disables it.
 There is also a get function for getting the pretimeout::
 
     ioctl(fd, WDIOC_GETPRETIMEOUT, &timeout);
-    printf("The pretimeout was is %d seconds\n", timeout);
+    printf("The pretimeout is %d seconds\n", timeout);
 
 Not all watchdog drivers will support a pretimeout.
 
@@ -145,7 +144,7 @@ before the system will reboot. The WDIOC_GETTIMELEFT is the ioctl
 that returns the number of seconds before reboot::
 
     ioctl(fd, WDIOC_GETTIMELEFT, &timeleft);
-    printf("The timeout was is %d seconds\n", timeleft);
+    printf("The timeout is %d seconds\n", timeleft);
 
 Environmental monitoring
 ========================
@@ -227,12 +226,33 @@ The watchdog saw a keepalive ping since it was last queried.
 	WDIOF_SETTIMEOUT	Can set/get the timeout
 	================	=======================
 
-The watchdog can do pretimeouts.
+The watchdog supports  timeout set/get via the WDIOC_SETTIMEOUT and
+WDIOC_GETTIMEOUT ioctls.
 
 	================	================================
 	WDIOF_PRETIMEOUT	Pretimeout (in seconds), get/set
 	================	================================
 
+The watchdog supports a pretimeout, a warning interrupt that fires before
+the actual reboot tiemout. USE WDIOC_SETPRETIMEOUT and WDIOC_GETPRETIMEOUT
+to set/get the pretimeout.
+
+	================	================================
+	WDIOF_MAGICCLOSE	Supports magic close char
+	================	================================
+
+The driver supports the Magic Close feature, The watchdog is only disabled
+if the characted 'V' is written to /dev/watchdog before the file descriptor
+is closed. Without this, closing the device disables the watchdog
+unconditionally.
+
+	================	================================
+	WDIOF_ALARMONLY	    Not a reboot watchdog
+	================	================================
+
+The watchdog will not reboot the system when it expires. Instead it
+triggers a management or other external alarm. Userspace should not
+rely on a system reboot occurring.
 
 For those drivers that return any bits set in the option field, the
 GETSTATUS and GETBOOTSTATUS ioctls can be used to ask for the current
@@ -268,4 +288,17 @@ The following options are available:
 	WDIOS_TEMPPANIC		Kernel panic on temperature trip
 	=================	================================
 
-[FIXME -- better explanations]
+``WDIOS_DISABLECARD`` stops the watchdog timer. The driver will cease
+pinging the hardware watchdog, allowing a controlled shutdown without
+a forced reboot. This is equivalent to the watchdog being disarmed.
+
+``WDIOS_ENABLECARD`` starts the watchdog timer. if the watchdog was
+previously stopped via ``WDIOS_DISABLECARD``,this will re-enable it. The
+hardware watchdog will begin counting down from the configured timeout.
+
+``WDIOS_TEMPPANIC`` enables temperature-based kernel panic. When set,
+the driver will call ``panic()`` (or ``kernel_power_off()`` on some
+drivers) if the hardware temperature sensor exceeds its threshold,
+rather than only setting the ``WDIOF_OVERHEAT`` status bit. Support
+for this option  is driver-specific, not all watchdog drivers implement
+temperature monitoring.
\ No newline at end of file
-- 
2.43.0