From: "Derek J. Clark" <derekjohn.clark@gmail.com>
To: Jiri Kosina <jikos@kernel.org>, Benjamin Tissoires <bentiss@kernel.org>
Cc: "Pierre-Loup A . Griffais" <pgriffais@valvesoftware.com>,
Denis Benato <denis.benato@linux.dev>,
Zhouwang Huang <honjow311@gmail.com>,
"Derek J . Clark" <derekjohn.clark@gmail.com>,
linux-input@vger.kernel.org, linux-doc@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 1/4] HID: hid-msi-claw: Add MSI Claw configuration driver
Date: Sun, 10 May 2026 04:35:07 +0000 [thread overview]
Message-ID: <20260510043510.442807-2-derekjohn.clark@gmail.com> (raw)
In-Reply-To: <20260510043510.442807-1-derekjohn.clark@gmail.com>
Adds configuration HID driver for the MSI Claw series of handheld PC's.
In this initial patch add the initial driver outline and attributes for
changing the gamepad mode, M-key behavior, and add a WO reset function.
Sending the SWITCH_MODE and RESET commands causes a USB disconnect in
the device. The completion will therefore never get hit and would trigger
an -EIO. To avoid showing the user an error for every write to these
attrs a bypass for the completion handling is introduced when timeout ==
0.
The initial version of this patch was written by Denis Benato, which
contained the initial reverse-engineering and implementation for the
gamepad mode switching. This work was later expanded by Zhouwang Huang
to include more gamepad modes. Finally, I refactored the drivers data
in/out flow and overall format to conform to kernel driver best
practices and style guides. Claude was used as an initial reviewer of
this patch.
Assisted-by: Claude:claude-sonnet-4-6
Co-developed-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Co-developed-by: Zhouwang Huang <honjow311@gmail.com>
Signed-off-by: Zhouwang Huang <honjow311@gmail.com>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
---
MAINTAINERS | 6 +
drivers/hid/Kconfig | 12 +
drivers/hid/Makefile | 1 +
drivers/hid/hid-ids.h | 6 +
drivers/hid/hid-msi-claw.c | 538 +++++++++++++++++++++++++++++++++++++
5 files changed, 563 insertions(+)
create mode 100644 drivers/hid/hid-msi-claw.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 6f6517bf4f97..5de5e62d9c92 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -17965,6 +17965,12 @@ S: Odd Fixes
F: Documentation/devicetree/bindings/net/ieee802154/mrf24j40.txt
F: drivers/net/ieee802154/mrf24j40.c
+MSI CLAW HID DRIVER
+M: Derek J. Clark <derekjohn.clark@gmail.com>
+L: linux-input@vger.kernel.org
+S: Maintained
+F: drivers/hid/hid-msi-claw.c
+
MSI EC DRIVER
M: Nikita Kravets <teackot@gmail.com>
L: platform-driver-x86@vger.kernel.org
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 10c12d8e6557..0cbe10ad6367 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -492,6 +492,18 @@ config HID_GT683R
Currently the following devices are know to be supported:
- MSI GT683R
+config HID_MSI_CLAW
+ tristate "MSI Claw Gamepad Support"
+ depends on USB_HID
+ select LEDS_CLASS
+ select LEDS_CLASS_MULTICOLOR
+ help
+ Support for the MSI Claw RGB and controller configuration
+
+ Say Y here to include configuration interface support for the MSI Claw Line
+ of Handheld Console Controllers. Say M here to compile this driver as a
+ module. The module will be called hid-msi-claw.
+
config HID_KEYTOUCH
tristate "Keytouch HID devices"
help
diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
index 07dfdb6a49c5..c1dea89f1e87 100644
--- a/drivers/hid/Makefile
+++ b/drivers/hid/Makefile
@@ -62,6 +62,7 @@ obj-$(CONFIG_HID_GOOGLE_HAMMER) += hid-google-hammer.o
obj-$(CONFIG_HID_GOOGLE_STADIA_FF) += hid-google-stadiaff.o
obj-$(CONFIG_HID_VIVALDI) += hid-vivaldi.o
obj-$(CONFIG_HID_GT683R) += hid-gt683r.o
+obj-$(CONFIG_HID_MSI_CLAW) += hid-msi-claw.o
obj-$(CONFIG_HID_GYRATION) += hid-gyration.o
obj-$(CONFIG_HID_HOLTEK) += hid-holtek-kbd.o
obj-$(CONFIG_HID_HOLTEK) += hid-holtek-mouse.o
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 933b7943bdb5..6d0d34806931 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -1047,7 +1047,13 @@
#define USB_DEVICE_ID_MOZA_R16_R21_2 0x0010
#define USB_VENDOR_ID_MSI 0x1770
+#define USB_VENDOR_ID_MSI_2 0x0db0
#define USB_DEVICE_ID_MSI_GT683R_LED_PANEL 0xff00
+#define USB_DEVICE_ID_MSI_CLAW_XINPUT 0x1901
+#define USB_DEVICE_ID_MSI_CLAW_DINPUT 0x1902
+#define USB_DEVICE_ID_MSI_CLAW_DESKTOP 0x1903
+#define USB_DEVICE_ID_MSI_CLAW_BIOS 0x1904
+
#define USB_VENDOR_ID_NATIONAL_SEMICONDUCTOR 0x0400
#define USB_DEVICE_ID_N_S_HARMONY 0xc359
diff --git a/drivers/hid/hid-msi-claw.c b/drivers/hid/hid-msi-claw.c
new file mode 100644
index 000000000000..7a3cd940ec49
--- /dev/null
+++ b/drivers/hid/hid-msi-claw.c
@@ -0,0 +1,538 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * HID driver for MSI Claw Handheld PC gamepads.
+ *
+ * Provides configuration support for the MSI Claw series of handheld PC
+ * gamepads. Multiple iterations of the device firmware has led to some
+ * quirks for how certain attributes are handled. The original firmware
+ * did not support remapping of the M1 (right) and M2 (left) rear paddles.
+ * Additionally, the MCU RAM address for writing configuration data has
+ * changed twice. Checks are done during probe to enumerate these variances.
+ *
+ * Copyright (c) 2026 Zhouwang Huang <honjow311@gmail.com>
+ * Copyright (c) 2026 Denis Benato <denis.benato@linux.dev>
+ * Copyright (c) 2026 Valve Corporation
+ */
+
+#include <linux/array_size.h>
+#include <linux/cleanup.h>
+#include <linux/completion.h>
+#include <linux/container_of.h>
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/kobject.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/sysfs.h>
+#include <linux/types.h>
+#include <linux/unaligned.h>
+#include <linux/usb.h>
+#include <linux/workqueue.h>
+
+#include "hid-ids.h"
+
+#define CLAW_OUTPUT_REPORT_ID 0x0f
+#define CLAW_INPUT_REPORT_ID 0x10
+
+#define CLAW_PACKET_SIZE 64
+
+#define CLAW_DINPUT_CFG_INTF_IN 0x82
+#define CLAW_XINPUT_CFG_INTF_IN 0x83
+
+enum claw_command_index {
+ CLAW_COMMAND_TYPE_READ_PROFILE = 0x04,
+ CLAW_COMMAND_TYPE_READ_PROFILE_ACK = 0x05,
+ CLAW_COMMAND_TYPE_ACK = 0x06,
+ CLAW_COMMAND_TYPE_WRITE_PROFILE_DATA = 0x21,
+ CLAW_COMMAND_TYPE_SYNC_TO_ROM = 0x22,
+ CLAW_COMMAND_TYPE_SWITCH_MODE = 0x24,
+ CLAW_COMMAND_TYPE_READ_GAMEPAD_MODE = 0x26,
+ CLAW_COMMAND_TYPE_GAMEPAD_MODE_ACK = 0x27,
+ CLAW_COMMAND_TYPE_RESET_DEVICE = 0x28,
+};
+
+enum claw_gamepad_mode_index {
+ CLAW_GAMEPAD_MODE_XINPUT = 0x01,
+ CLAW_GAMEPAD_MODE_DINPUT = 0x02,
+ CLAW_GAMEPAD_MODE_DESKTOP = 0x04,
+};
+
+static const char * const claw_gamepad_mode_text[] = {
+ [CLAW_GAMEPAD_MODE_XINPUT] = "xinput",
+ [CLAW_GAMEPAD_MODE_DINPUT] = "dinput",
+ [CLAW_GAMEPAD_MODE_DESKTOP] = "desktop",
+};
+
+enum claw_mkeys_function_index {
+ CLAW_MKEY_FUNCTION_MACRO,
+ CLAW_MKEY_FUNCTION_COMBO,
+ CLAW_MKEY_FUNCTION_DISABLED,
+};
+
+static const char * const claw_mkeys_function_text[] = {
+ [CLAW_MKEY_FUNCTION_MACRO] = "macro",
+ [CLAW_MKEY_FUNCTION_COMBO] = "combination",
+ [CLAW_MKEY_FUNCTION_DISABLED] = "disabled",
+};
+
+struct claw_command_report {
+ u8 report_id;
+ u8 padding[2];
+ u8 header_tail;
+ u8 cmd;
+ u8 data[59];
+} __packed;
+
+struct claw_drvdata {
+ /* MCU General Variables */
+ struct completion send_cmd_complete;
+ struct delayed_work cfg_resume;
+ struct delayed_work cfg_setup;
+ struct hid_device *hdev;
+ struct mutex cfg_mutex; /* mutex for synchronous data */
+ int endpoint;
+
+ /* Gamepad Variables */
+ enum claw_mkeys_function_index mkeys_function;
+ enum claw_gamepad_mode_index gamepad_mode;
+};
+
+static int get_endpoint_address(struct hid_device *hdev)
+{
+ struct usb_interface *intf = to_usb_interface(hdev->dev.parent);
+ struct usb_host_endpoint *ep;
+
+ ep = intf->cur_altsetting->endpoint;
+ if (ep)
+ return ep->desc.bEndpointAddress;
+
+ return -ENODEV;
+}
+
+static int claw_gamepad_mode_event(struct claw_drvdata *drvdata,
+ struct claw_command_report *cmd_rep)
+{
+ if (cmd_rep->data[0] >= ARRAY_SIZE(claw_gamepad_mode_text) ||
+ cmd_rep->data[1] >= ARRAY_SIZE(claw_mkeys_function_text))
+ return -EINVAL;
+
+ drvdata->gamepad_mode = cmd_rep->data[0];
+ drvdata->mkeys_function = cmd_rep->data[1];
+
+ return 0;
+}
+
+static int claw_raw_event(struct hid_device *hdev, struct hid_report *report,
+ u8 *data, int size)
+{
+ struct claw_drvdata *drvdata = hid_get_drvdata(hdev);
+ struct claw_command_report *cmd_rep;
+ int ret = 0;
+
+ if (size != CLAW_PACKET_SIZE)
+ return 0;
+
+ if (drvdata->endpoint != CLAW_XINPUT_CFG_INTF_IN &&
+ drvdata->endpoint != CLAW_DINPUT_CFG_INTF_IN)
+ return 0;
+
+ cmd_rep = (struct claw_command_report *)data;
+
+ if (cmd_rep->report_id != CLAW_INPUT_REPORT_ID || cmd_rep->header_tail != 0x3c)
+ return 0;
+
+ dev_dbg(&hdev->dev, "Rx data as raw input report: [%*ph]\n",
+ CLAW_PACKET_SIZE, data);
+
+ switch (cmd_rep->cmd) {
+ case CLAW_COMMAND_TYPE_GAMEPAD_MODE_ACK:
+ ret = claw_gamepad_mode_event(drvdata, cmd_rep);
+ break;
+ case CLAW_COMMAND_TYPE_ACK:
+ break;
+ default:
+ dev_dbg(&hdev->dev, "Unknown command: %x\n", cmd_rep->cmd);
+ return 0;
+ }
+
+ complete(&drvdata->send_cmd_complete);
+ return ret;
+}
+
+static int mcu_property_out(struct hid_device *hdev, u8 index, u8 *data,
+ size_t len, unsigned int timeout)
+{
+ unsigned char *dmabuf __free(kfree) = NULL;
+ u8 header[] = { CLAW_OUTPUT_REPORT_ID, 0, 0, 0x3c, index };
+ struct claw_drvdata *drvdata = hid_get_drvdata(hdev);
+ size_t header_size = ARRAY_SIZE(header);
+ int ret;
+
+ if (header_size + len > CLAW_PACKET_SIZE)
+ return -EINVAL;
+
+ /* We can't use a devm_alloc reusable buffer without side effects during suspend */
+ dmabuf = kzalloc(CLAW_PACKET_SIZE, GFP_KERNEL);
+ if (!dmabuf)
+ return -ENOMEM;
+
+ memcpy(dmabuf, header, header_size);
+ if (data && len)
+ memcpy(dmabuf + header_size, data, len);
+
+ /* Don't hold a mutex when timeout=0, those commands cause USB disconnect */
+ if (timeout) {
+ guard(mutex)(&drvdata->cfg_mutex);
+ reinit_completion(&drvdata->send_cmd_complete);
+ }
+
+ dev_dbg(&hdev->dev, "Send data as raw output report: [%*ph]\n",
+ CLAW_PACKET_SIZE, dmabuf);
+
+ ret = hid_hw_output_report(hdev, dmabuf, CLAW_PACKET_SIZE);
+ if (ret < 0)
+ return ret;
+
+ ret = ret == CLAW_PACKET_SIZE ? 0 : -EIO;
+ if (ret)
+ return ret;
+
+ if (timeout) {
+ ret = wait_for_completion_interruptible_timeout(&drvdata->send_cmd_complete,
+ msecs_to_jiffies(timeout));
+
+ dev_dbg(&hdev->dev, "Remaining timeout: %u\n", ret);
+ if (ret >= 0) /* preserve errors */
+ ret = ret == 0 ? -EBUSY : 0; /* timeout occurred : time remained */
+ }
+
+ return ret;
+}
+
+static ssize_t gamepad_mode_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct hid_device *hdev = to_hid_device(dev);
+ struct claw_drvdata *drvdata = hid_get_drvdata(hdev);
+ u8 data[2] = { 0x00, drvdata->mkeys_function };
+ int i, ret = -EINVAL;
+
+ for (i = 0; i < ARRAY_SIZE(claw_gamepad_mode_text); i++) {
+ if (claw_gamepad_mode_text[i] && sysfs_streq(buf, claw_gamepad_mode_text[i])) {
+ ret = i;
+ break;
+ }
+ }
+ if (ret < 0)
+ return ret;
+
+ data[0] = ret;
+
+ ret = mcu_property_out(hdev, CLAW_COMMAND_TYPE_SWITCH_MODE, data, ARRAY_SIZE(data), 0);
+ if (ret)
+ return ret;
+
+ return count;
+}
+
+static ssize_t gamepad_mode_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct hid_device *hdev = to_hid_device(dev);
+ struct claw_drvdata *drvdata = hid_get_drvdata(hdev);
+ int ret, i;
+
+ ret = mcu_property_out(hdev, CLAW_COMMAND_TYPE_READ_GAMEPAD_MODE, NULL, 0, 8);
+ if (ret)
+ return ret;
+
+ i = drvdata->gamepad_mode;
+
+ if (!claw_gamepad_mode_text[i] || claw_gamepad_mode_text[i][0] == '\0')
+ return sysfs_emit(buf, "unsupported\n");
+
+ return sysfs_emit(buf, "%s\n", claw_gamepad_mode_text[i]);
+}
+static DEVICE_ATTR_RW(gamepad_mode);
+
+static ssize_t gamepad_mode_index_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ ssize_t count = 0;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(claw_gamepad_mode_text); i++) {
+ if (!claw_gamepad_mode_text[i] || claw_gamepad_mode_text[i][0] == '\0')
+ continue;
+ count += sysfs_emit_at(buf, count, "%s ", claw_gamepad_mode_text[i]);
+ }
+
+ buf[count - 1] = '\n';
+
+ return count;
+}
+static DEVICE_ATTR_RO(gamepad_mode_index);
+
+static ssize_t mkeys_function_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct hid_device *hdev = to_hid_device(dev);
+ struct claw_drvdata *drvdata = hid_get_drvdata(hdev);
+ u8 data[2] = { drvdata->gamepad_mode, 0x00 };
+ int i, ret = -EINVAL;
+
+ for (i = 0; i < ARRAY_SIZE(claw_mkeys_function_text); i++) {
+ if (claw_mkeys_function_text[i] && sysfs_streq(buf, claw_mkeys_function_text[i])) {
+ ret = i;
+ break;
+ }
+ }
+ if (ret < 0)
+ return ret;
+
+ data[1] = ret;
+
+ ret = mcu_property_out(hdev, CLAW_COMMAND_TYPE_SWITCH_MODE, data, ARRAY_SIZE(data), 0);
+ if (ret)
+ return ret;
+
+ return count;
+}
+
+static ssize_t mkeys_function_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct hid_device *hdev = to_hid_device(dev);
+ struct claw_drvdata *drvdata = hid_get_drvdata(hdev);
+ int ret, i;
+
+ ret = mcu_property_out(hdev, CLAW_COMMAND_TYPE_READ_GAMEPAD_MODE, NULL, 0, 8);
+ if (ret)
+ return ret;
+
+ i = drvdata->mkeys_function;
+
+ if (i >= ARRAY_SIZE(claw_mkeys_function_text))
+ return sysfs_emit(buf, "unsupported\n");
+
+ return sysfs_emit(buf, "%s\n", claw_mkeys_function_text[i]);
+}
+static DEVICE_ATTR_RW(mkeys_function);
+
+static ssize_t mkeys_function_index_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int i, count = 0;
+
+ for (i = 0; i < ARRAY_SIZE(claw_mkeys_function_text); i++)
+ count += sysfs_emit_at(buf, count, "%s ", claw_mkeys_function_text[i]);
+
+ buf[count - 1] = '\n';
+
+ return count;
+}
+static DEVICE_ATTR_RO(mkeys_function_index);
+
+static ssize_t reset_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct hid_device *hdev = to_hid_device(dev);
+ bool val;
+ int ret;
+
+ ret = kstrtobool(buf, &val);
+ if (ret)
+ return ret;
+
+ if (!val)
+ return -EINVAL;
+
+ ret = mcu_property_out(hdev, CLAW_COMMAND_TYPE_RESET_DEVICE, NULL, 0, 0);
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+static DEVICE_ATTR_WO(reset);
+
+static umode_t claw_gamepad_attr_is_visible(struct kobject *kobj, struct attribute *attr,
+ int n)
+{
+ struct hid_device *hdev = to_hid_device(kobj_to_dev(kobj));
+ struct claw_drvdata *drvdata = hid_get_drvdata(hdev);
+
+ if (!drvdata) {
+ dev_warn(&hdev->dev,
+ "Failed to get drvdata from kobj. Gamepad attributes are not available.\n");
+ return 0;
+ }
+
+ return attr->mode;
+}
+
+static struct attribute *claw_gamepad_attrs[] = {
+ &dev_attr_gamepad_mode.attr,
+ &dev_attr_gamepad_mode_index.attr,
+ &dev_attr_mkeys_function.attr,
+ &dev_attr_mkeys_function_index.attr,
+ &dev_attr_reset.attr,
+ NULL,
+};
+
+static const struct attribute_group claw_gamepad_attr_group = {
+ .attrs = claw_gamepad_attrs,
+ .is_visible = claw_gamepad_attr_is_visible,
+};
+
+static void claw_remove(struct hid_device *hdev);
+
+static void cfg_setup_fn(struct work_struct *work)
+{
+ struct delayed_work *dwork = container_of(work, struct delayed_work, work);
+ struct claw_drvdata *drvdata = container_of(dwork, struct claw_drvdata, cfg_setup);
+ int ret;
+
+ ret = mcu_property_out(drvdata->hdev, CLAW_COMMAND_TYPE_READ_GAMEPAD_MODE, NULL, 0, 8);
+ if (ret) {
+ dev_err(&drvdata->hdev->dev,
+ "Failed to setup device, can't read gamepad mode: %d\n", ret);
+ claw_remove(drvdata->hdev);
+ }
+
+ /* Add sysfs attributes after we get the device state */
+ ret = sysfs_create_group(&drvdata->hdev->dev.kobj, &claw_gamepad_attr_group);
+ if (ret) {
+ dev_err(&drvdata->hdev->dev,
+ "Failed to setup device, can't create gamepad attrs: %d\n", ret);
+ claw_remove(drvdata->hdev);
+ }
+
+ kobject_uevent(&drvdata->hdev->dev.kobj, KOBJ_CHANGE);
+}
+
+static void cfg_resume_fn(struct work_struct *work)
+{
+ struct delayed_work *dwork = container_of(work, struct delayed_work, work);
+ struct claw_drvdata *drvdata = container_of(dwork, struct claw_drvdata, cfg_resume);
+ u8 data[2] = { drvdata->gamepad_mode, drvdata->mkeys_function };
+ int ret;
+
+ ret = mcu_property_out(drvdata->hdev, CLAW_COMMAND_TYPE_SWITCH_MODE, data,
+ ARRAY_SIZE(data), 0);
+ if (ret)
+ dev_err(&drvdata->hdev->dev, "Failed to set gamepad mode settings: %d\n", ret);
+}
+
+static int claw_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+ struct claw_drvdata *drvdata;
+ struct usb_interface *intf;
+ struct usb_device *udev;
+ int ret;
+
+ if (!hid_is_usb(hdev)) {
+ ret = -ENODEV;
+ goto err_probe;
+ }
+
+ intf = to_usb_interface(hdev->dev.parent);
+ udev = interface_to_usbdev(intf);
+ drvdata = devm_kzalloc(&hdev->dev, sizeof(*drvdata), GFP_KERNEL);
+ if (!drvdata) {
+ ret = -ENOMEM;
+ goto err_probe;
+ }
+
+ mutex_init(&drvdata->cfg_mutex);
+
+ hid_set_drvdata(hdev, drvdata);
+ drvdata->hdev = hdev;
+
+ ret = hid_parse(hdev);
+ if (ret)
+ goto err_probe;
+
+ /* Set quirk to create separate input devices per HID application */
+ hdev->quirks |= HID_QUIRK_INPUT_PER_APP | HID_QUIRK_MULTI_INPUT;
+ ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+ if (ret)
+ goto err_probe;
+
+ /* For non-control interfaces (keyboard/mouse), allow userspace to grab the devices. */
+ drvdata->endpoint = get_endpoint_address(hdev);
+ if (drvdata->endpoint != CLAW_XINPUT_CFG_INTF_IN &&
+ drvdata->endpoint != CLAW_DINPUT_CFG_INTF_IN)
+ return 0;
+
+ /* For control interface: open the HID transport for sending commands. */
+ ret = hid_hw_open(hdev);
+ if (ret)
+ goto err_stop_hw;
+
+ init_completion(&drvdata->send_cmd_complete);
+
+ INIT_DELAYED_WORK(&drvdata->cfg_resume, &cfg_resume_fn);
+ INIT_DELAYED_WORK(&drvdata->cfg_setup, &cfg_setup_fn);
+ schedule_delayed_work(&drvdata->cfg_setup, msecs_to_jiffies(500));
+
+ return 0;
+
+err_stop_hw:
+ hid_hw_stop(hdev);
+err_probe:
+ return dev_err_probe(&hdev->dev, ret, "Failed to init configuration device\n");
+}
+
+static void claw_remove(struct hid_device *hdev)
+{
+ struct claw_drvdata *drvdata = hid_get_drvdata(hdev);
+
+ if (!drvdata)
+ return;
+
+ if (drvdata->endpoint == CLAW_XINPUT_CFG_INTF_IN ||
+ drvdata->endpoint == CLAW_DINPUT_CFG_INTF_IN) {
+ sysfs_remove_group(&hdev->dev.kobj, &claw_gamepad_attr_group);
+ cancel_delayed_work_sync(&drvdata->cfg_setup);
+ cancel_delayed_work_sync(&drvdata->cfg_resume);
+ hid_hw_close(hdev);
+ }
+
+ hid_hw_stop(hdev);
+}
+
+static int claw_resume(struct hid_device *hdev)
+{
+ struct claw_drvdata *drvdata = hid_get_drvdata(hdev);
+
+ /* MCU can take up to 500ms to be ready after resume */
+ schedule_delayed_work(&drvdata->cfg_resume, msecs_to_jiffies(500));
+
+ return 0;
+}
+
+static const struct hid_device_id claw_devices[] = {
+ { HID_USB_DEVICE(USB_VENDOR_ID_MSI_2, USB_DEVICE_ID_MSI_CLAW_XINPUT) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_MSI_2, USB_DEVICE_ID_MSI_CLAW_DINPUT) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_MSI_2, USB_DEVICE_ID_MSI_CLAW_DESKTOP) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_MSI_2, USB_DEVICE_ID_MSI_CLAW_BIOS) },
+ { }
+};
+MODULE_DEVICE_TABLE(hid, claw_devices);
+
+static struct hid_driver claw_driver = {
+ .name = "hid-msi-claw",
+ .id_table = claw_devices,
+ .raw_event = claw_raw_event,
+ .probe = claw_probe,
+ .remove = claw_remove,
+ .resume = claw_resume,
+};
+module_hid_driver(claw_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Denis Benato <denis.benato@linux.dev>");
+MODULE_AUTHOR("Zhouwang Huang <honjow311@gmail.com>");
+MODULE_AUTHOR("Derek J. Clark <derekjohn.clark@gmail.com>");
+MODULE_DESCRIPTION("HID driver for MSI Claw Handheld PC gamepads");
--
2.53.0
next prev parent reply other threads:[~2026-05-10 4:35 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-10 4:35 [PATCH 0/4] Add MSI Claw HID Configuration Driver Derek J. Clark
2026-05-10 4:35 ` Derek J. Clark [this message]
2026-05-10 4:35 ` [PATCH 2/4] HID: hid-msi-claw: Add M-key mapping attributes Derek J. Clark
2026-05-10 4:35 ` [PATCH 3/4] HID: hid-msi-claw: Add RGB control interface Derek J. Clark
2026-05-10 4:35 ` [PATCH 4/4] HID: hid-msi-claw: Add Rumble Intensity Attributes Derek J. Clark
2026-05-12 16:13 ` [PATCH 0/4] Add MSI Claw HID Configuration Driver Jiri Kosina
2026-05-12 17:54 ` Derek John Clark
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260510043510.442807-2-derekjohn.clark@gmail.com \
--to=derekjohn.clark@gmail.com \
--cc=bentiss@kernel.org \
--cc=denis.benato@linux.dev \
--cc=honjow311@gmail.com \
--cc=jikos@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pgriffais@valvesoftware.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox