[PATCH v6 06/11] mfd: sec: resolve PMIC revision in S2MU005

[Kaustabh Chakraborty <kauschluss@disroot.org>]

In devices other than S2MPG1X, the revision can be retrieved from the
first register of the PMIC regmap. In S2MU005 however, the location is
in offset 0x73. Introduce a switch-case block to allow selecting the
REG_ID register.

S2MU005 also has a field mask for the revision. Apply it using
FIELD_GET() and get the extracted value.

Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
---
 drivers/mfd/sec-common.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/drivers/mfd/sec-common.c b/drivers/mfd/sec-common.c
index afc9e691bb67c..fe92bc4a3dd26 100644
--- a/drivers/mfd/sec-common.c
+++ b/drivers/mfd/sec-common.c
@@ -16,6 +16,7 @@
 #include <linux/mfd/samsung/irq.h>
 #include <linux/mfd/samsung/s2mps11.h>
 #include <linux/mfd/samsung/s2mps13.h>
+#include <linux/mfd/samsung/s2mu005.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/pm.h>
@@ -119,20 +120,25 @@ static const struct mfd_cell s2mu005_devs[] = {
 
 static void sec_pmic_dump_rev(struct sec_pmic_dev *sec_pmic)
 {
-	unsigned int val;
+	unsigned int reg, mask, val;
 
-	/* For s2mpg1x, the revision is in a different regmap */
 	switch (sec_pmic->device_type) {
 	case S2MPG10:
 	case S2MPG11:
+		/* For s2mpg1x, the revision is in a different regmap */
 		return;
-	default:
+	case S2MU005:
+		reg = S2MU005_REG_ID;
+		mask = S2MU005_ID_MASK;
 		break;
+	default:
+		/* For other device types, REG_ID is always the first register. */
+		reg = S2MPS11_REG_ID;
+		mask = ~0;
 	}
 
-	/* For each device type, the REG_ID is always the first register */
-	if (!regmap_read(sec_pmic->regmap_pmic, S2MPS11_REG_ID, &val))
-		dev_dbg(sec_pmic->dev, "Revision: 0x%x\n", val);
+	if (!regmap_read(sec_pmic->regmap_pmic, reg, &val))
+		dev_dbg(sec_pmic->dev, "Revision: 0x%x\n", field_get(mask, val));
 }
 
 static void sec_pmic_configure(struct sec_pmic_dev *sec_pmic)

-- 
2.53.0