From: Ethan Nelson-Moore <enelsonmoore@gmail.com>
To: linux-doc@vger.kernel.org
Cc: Ethan Nelson-Moore <enelsonmoore@gmail.com>,
stable@vger.kernel.org, Jonathan Corbet <corbet@lwn.net>,
Shuah Khan <skhan@linuxfoundation.org>,
Damien Le Moal <dlemoal@kernel.org>
Subject: [PATCH] ata: pata_legacy: remove documentation for removed module parameters
Date: Sat, 6 Jun 2026 23:40:49 -0700 [thread overview]
Message-ID: <20260607064053.195166-1-enelsonmoore@gmail.com> (raw)
Commit 3c4d783f6922 ("ata: pata_legacy: remove VLB support") removed
several module parameters from the pata_legacy driver, but neglected to
remove their documentation. Remove it.
Fixes: 3c4d783f6922 ("ata: pata_legacy: remove VLB support")
Cc: stable@vger.kernel.org # 7.0+
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
---
.../admin-guide/kernel-parameters.txt | 37 -------------------
1 file changed, 37 deletions(-)
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 97007f4f69d4..47bccc148a54 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -4935,18 +4935,6 @@ Kernel parameters
Set to non-zero if a chip is present that snoops speed
changes. Disabled by default.
- pata_legacy.ht6560a= [HW,LIBATA]
- Format: <int>
- Set to 1, 2, or 3 for HT 6560A on the primary channel,
- the secondary channel, or both channels respectively.
- Disabled by default.
-
- pata_legacy.ht6560b= [HW,LIBATA]
- Format: <int>
- Set to 1, 2, or 3 for HT 6560B on the primary channel,
- the secondary channel, or both channels respectively.
- Disabled by default.
-
pata_legacy.iordy_mask= [HW,LIBATA]
Format: <int>
IORDY enable mask. Set individual bits to allow IORDY
@@ -4959,18 +4947,6 @@ Kernel parameters
with the sequence. By default IORDY is allowed across
all channels.
- pata_legacy.opti82c46x= [HW,LIBATA]
- Format: <int>
- Set to 1, 2, or 3 for Opti 82c611A on the primary
- channel, the secondary channel, or both channels
- respectively. Disabled by default.
-
- pata_legacy.opti82c611a= [HW,LIBATA]
- Format: <int>
- Set to 1, 2, or 3 for Opti 82c465MV on the primary
- channel, the secondary channel, or both channels
- respectively. Disabled by default.
-
pata_legacy.pio_mask= [HW,LIBATA]
Format: <int>
PIO mode mask for autospeed devices. Set individual
@@ -4994,19 +4970,6 @@ Kernel parameters
the first port in the list above (0x1f0), and so on.
By default all supported ports are probed.
- pata_legacy.qdi= [HW,LIBATA]
- Format: <int>
- Set to non-zero to probe QDI controllers. By default
- set to 1 if CONFIG_PATA_QDI_MODULE, 0 otherwise.
-
- pata_legacy.winbond= [HW,LIBATA]
- Format: <int>
- Set to non-zero to probe Winbond controllers. Use
- the standard I/O port (0x130) if 1, otherwise the
- value given is the I/O port to use (typically 0x1b0).
- By default set to 1 if CONFIG_PATA_WINBOND_VLB_MODULE,
- 0 otherwise.
-
pata_platform.pio_mask= [HW,LIBATA]
Format: <int>
Supported PIO mode mask. Set individual bits to allow
--
2.43.0
reply other threads:[~2026-06-07 6:41 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260607064053.195166-1-enelsonmoore@gmail.com \
--to=enelsonmoore@gmail.com \
--cc=corbet@lwn.net \
--cc=dlemoal@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=skhan@linuxfoundation.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox