From: Jinseob Kim <kimjinseob88@gmail.com>
To: Jonathan Cameron <jic23@kernel.org>, linux-iio@vger.kernel.org
Cc: "David Lechner" <dlechner@baylibre.com>,
"Nuno Sá" <nuno.sa@analog.com>,
"Andy Shevchenko" <andriy.shevchenko@intel.com>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Jonathan Corbet" <corbet@lwn.net>,
"Shuah Khan" <skhan@linuxfoundation.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-doc@vger.kernel.org
Subject: [PATCH RFC v4 1/6] dt-bindings: iio: add Open Sensor Fusion device
Date: Mon, 8 Jun 2026 08:43:38 +0900 [thread overview]
Message-ID: <20260607234343.22109-2-kimjinseob88@gmail.com> (raw)
In-Reply-To: <20260607234343.22109-1-kimjinseob88@gmail.com>
Describe the OSF sensor aggregation hub.
Use the generic opensensorfusion,osf compatible.
Signed-off-by: Jinseob Kim <kimjinseob88@gmail.com>
---
.../iio/imu/opensensorfusion,osf-green.yaml | 43 -------------------
.../bindings/iio/opensensorfusion,osf.yaml | 43 +++++++++++++++++++
MAINTAINERS | 27 ++++++------
3 files changed, 57 insertions(+), 56 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/iio/imu/opensensorfusion,osf-green.yaml
create mode 100644 Documentation/devicetree/bindings/iio/opensensorfusion,osf.yaml
diff --git a/Documentation/devicetree/bindings/iio/imu/opensensorfusion,osf-green.yaml b/Documentation/devicetree/bindings/iio/imu/opensensorfusion,osf-green.yaml
deleted file mode 100644
index 626b41fb0..000000000
--- a/Documentation/devicetree/bindings/iio/imu/opensensorfusion,osf-green.yaml
+++ /dev/null
@@ -1,43 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/iio/imu/opensensorfusion,osf-green.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: OSF GREEN sensor aggregation board
-
-maintainers:
- - Jinseob Kim <kimjinseob88@gmail.com>
-
-description: |
- OSF GREEN is an STM32F405-based sensor aggregation board from the Open
- Sensor Fusion open hardware project. It sends OSF0 capability, status, and
- sample frames to a host over a UART link.
-
- Open Sensor Fusion is not a generic industry standard. Public project and
- hardware documentation is available at:
-
- https://github.com/opensensorfusion
- https://github.com/opensensorfusion/opensensorfusion-hardware
-
-allOf:
- - $ref: /schemas/serial/serial-peripheral-props.yaml#
-
-properties:
- compatible:
- const: opensensorfusion,osf-green
-
-required:
- - compatible
-
-unevaluatedProperties: false
-
-examples:
- - |
- serial {
- sensor {
- compatible = "opensensorfusion,osf-green";
- };
- };
-
-...
diff --git a/Documentation/devicetree/bindings/iio/opensensorfusion,osf.yaml b/Documentation/devicetree/bindings/iio/opensensorfusion,osf.yaml
new file mode 100644
index 000000000..a4049715a
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/opensensorfusion,osf.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/opensensorfusion,osf.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Open Sensor Fusion Sensor Aggregation Hub
+
+maintainers:
+ - Jinseob Kim <kimjinseob88@gmail.com>
+
+description: |
+ Open Sensor Fusion is a sensor aggregation hub. The hub exposes an OSF
+ protocol data stream over its host interface and may report capabilities and
+ samples for multiple sensor classes. The Linux driver discovers the actual
+ sensor channels from OSF capability reports instead of describing those
+ sensors in Device Tree.
+
+ Open Sensor Fusion is not a generic industry standard. Public project
+ documentation is available at:
+
+ https://github.com/opensensorfusion
+
+allOf:
+ - $ref: /schemas/serial/serial-peripheral-props.yaml#
+
+properties:
+ compatible:
+ const: opensensorfusion,osf
+
+required:
+ - compatible
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ serial {
+ sensor {
+ compatible = "opensensorfusion,osf";
+ };
+ };
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 56181470d..e227b9aff 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -19977,19 +19977,6 @@ F: Documentation/networking/oa-tc6-framework.rst
F: drivers/net/ethernet/oa_tc6.c
F: include/linux/oa_tc6.h
-OPEN SENSOR FUSION IIO DRIVER
-M: Jinseob Kim <kimjinseob88@gmail.com>
-S: Maintained
-F: Documentation/devicetree/bindings/iio/imu/opensensorfusion,osf-green.yaml
-F: Documentation/iio/open-sensor-fusion-protocol-v0.rst
-F: drivers/iio/opensensorfusion/Kconfig
-F: drivers/iio/opensensorfusion/Makefile
-F: drivers/iio/opensensorfusion/osf_core.*
-F: drivers/iio/opensensorfusion/osf_iio.*
-F: drivers/iio/opensensorfusion/osf_protocol.*
-F: drivers/iio/opensensorfusion/osf_serdev.c
-F: drivers/iio/opensensorfusion/osf_stream.*
-
OPEN FIRMWARE AND FLATTENED DEVICE TREE
M: Rob Herring <robh@kernel.org>
M: Saravana Kannan <saravanak@kernel.org>
@@ -20024,6 +20011,20 @@ F: Documentation/devicetree/
F: arch/*/boot/dts/
F: include/dt-bindings/
+OPEN SENSOR FUSION IIO DRIVER
+M: Jinseob Kim <kimjinseob88@gmail.com>
+S: Maintained
+F: Documentation/devicetree/bindings/iio/opensensorfusion,osf.yaml
+F: Documentation/iio/open-sensor-fusion-protocol-v0.rst
+F: drivers/iio/opensensorfusion/Kconfig
+F: drivers/iio/opensensorfusion/Makefile
+F: drivers/iio/opensensorfusion/osf_core.*
+F: drivers/iio/opensensorfusion/osf_iio.*
+F: drivers/iio/opensensorfusion/osf_protocol.*
+F: drivers/iio/opensensorfusion/osf_serdev.c
+F: drivers/iio/opensensorfusion/osf_stream.*
+
+
OPENCOMPUTE PTP CLOCK DRIVER
M: Vadim Fedorenko <vadim.fedorenko@linux.dev>
L: netdev@vger.kernel.org
--
2.43.0
next prev parent reply other threads:[~2026-06-07 23:45 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-07 23:43 [PATCH RFC v4 0/6] iio: add Open Sensor Fusion IIO driver Jinseob Kim
2026-06-07 23:43 ` Jinseob Kim [this message]
2026-06-07 23:43 ` [PATCH RFC v4 2/6] Documentation: iio: add Open Sensor Fusion driver overview Jinseob Kim
2026-06-07 23:43 ` [PATCH RFC v4 3/6] iio: osf: add protocol decoding Jinseob Kim
2026-06-07 23:43 ` [PATCH RFC v4 4/6] iio: osf: add stream parser Jinseob Kim
2026-06-07 23:43 ` [PATCH RFC v4 5/6] iio: osf: add UART transport Jinseob Kim
2026-06-07 23:43 ` [PATCH RFC v4 6/6] iio: osf: register IIO devices from capabilities Jinseob Kim
2026-06-08 17:28 ` [PATCH RFC v4 0/6] iio: add Open Sensor Fusion IIO driver Conor Dooley
2026-06-08 23:27 ` Kim Jinseob
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260607234343.22109-2-kimjinseob88@gmail.com \
--to=kimjinseob88@gmail.com \
--cc=andriy.shevchenko@intel.com \
--cc=conor+dt@kernel.org \
--cc=corbet@lwn.net \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=jic23@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nuno.sa@analog.com \
--cc=robh@kernel.org \
--cc=skhan@linuxfoundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox