Linux Documentation
 help / color / mirror / Atom feed
From: Akshay Gupta <Akshay.Gupta@amd.com>
To: <linux-doc@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-hwmon@vger.kernel.org>
Cc: <corbet@lwn.net>, <skhan@linuxfoundation.org>,
	<linux@roeck-us.net>, <arnd@arndb.de>,
	<gregkh@linuxfoundation.org>, <NaveenKrishna.Chatradhi@amd.com>,
	<Anand.Umarji@amd.com>, <Akshay.Gupta@amd.com>,
	<Prathima.Lk@amd.com>
Subject: [PATCH v3 6/8] misc: amd-sbi: Add SBTSI ioctl register transfer interface
Date: Mon, 22 Jun 2026 19:28:19 +0530	[thread overview]
Message-ID: <20260622135821.2190260-7-Akshay.Gupta@amd.com> (raw)
In-Reply-To: <20260622135821.2190260-1-Akshay.Gupta@amd.com>

From: Prathima <Prathima.Lk@amd.com>

Implement IOCTL interface for SB-TSI driver to enable userspace access
to TSI register read/write operations through the AMD Advanced Platform
Management Link (APML) protocol.
Add an ioctl command (SBTSI_IOCTL_REG_XFER_CMD) that accepts a register
address, data byte, and direction flag. Serialize access with a mutex
shared between the hwmon and ioctl paths to prevent concurrent bus
transactions from corrupting register state.

Reviewed-by: Akshay Gupta <Akshay.Gupta@amd.com>
Signed-off-by: Prathima <Prathima.Lk@amd.com>
---
Changes since v2:
- Address feedback to hide mutex with common guard function
- Separate out mutex patch in hwmon file to next patch, 7/8
- Use file operation, open/release and kref to prevent use-after-free
  if the device is unbound in IOCTL
- Add check for msg.pad
 
Changes since v1:
- Use of devm_mutex_init in place of mutex_init
- Use of guard_mutex in place of mutex_lock()/mutex_unlock()
- Use of devm_add_action_or_reset() for clean removal
 drivers/misc/amd-sbi/tsi-core.c | 118 +++++++++++++++++++++++++++++++-
 drivers/misc/amd-sbi/tsi-core.h |   3 +
 drivers/misc/amd-sbi/tsi.c      |  36 +++++++++-
 include/linux/misc/tsi.h        |  15 ++++
 include/uapi/misc/amd-apml.h    |  23 +++++++
 5 files changed, 191 insertions(+), 4 deletions(-)

diff --git a/drivers/misc/amd-sbi/tsi-core.c b/drivers/misc/amd-sbi/tsi-core.c
index 9278d06d8e5f..688b9221868f 100644
--- a/drivers/misc/amd-sbi/tsi-core.c
+++ b/drivers/misc/amd-sbi/tsi-core.c
@@ -6,7 +6,11 @@
  * Copyright (C) 2026 Advanced Micro Devices, Inc.
  */
 
+#include <linux/fs.h>
+#include <linux/ioctl.h>
 #include <linux/module.h>
+#include <linux/uaccess.h>
+#include <uapi/misc/amd-apml.h>
 #include "tsi-core.h"
 
 static inline struct sbtsi_i3c_priv *to_sbtsi_i3c_priv(struct sbtsi_data *data)
@@ -19,6 +23,17 @@ static u8 *sbtsi_i3c_buf(struct sbtsi_data *data)
 	return to_sbtsi_i3c_priv(data)->buf;
 }
 
+void sbtsi_data_release(struct kref *kref)
+{
+	struct sbtsi_data *data = container_of(kref, struct sbtsi_data, kref);
+
+	mutex_destroy(&data->lock);
+	if (data->is_i3c)
+		kfree(to_sbtsi_i3c_priv(data));
+	else
+		kfree(data);
+}
+
 /* I2C transfer function */
 static int sbtsi_i2c_xfer(struct sbtsi_data *data, u8 reg, u8 *val, bool is_read)
 {
@@ -80,7 +95,108 @@ int sbtsi_xfer(struct sbtsi_data *data, u8 reg, u8 *val, bool is_read)
 	if (data->is_i3c)
 		return is_read ? sbtsi_i3c_read(data, reg, val)
 			       : sbtsi_i3c_write(data, reg, *val);
-
 	return sbtsi_i2c_xfer(data, reg, val, is_read);
 }
 EXPORT_SYMBOL_GPL(sbtsi_xfer);
+
+/*
+ * The mutex protects against concurrent access to the shared I2C/I3C bus by
+ * the hwmon sysfs and a userspace ioctl.
+ */
+static int sbtsi_xfer_ioctl(struct sbtsi_data *data, u8 reg, u8 *val, bool is_read)
+{
+	guard(sbtsi)(data);
+	return sbtsi_xfer(data, reg, val, is_read);
+}
+
+static int apml_tsi_reg_xfer(struct sbtsi_data *data,
+			     struct apml_tsi_xfer_msg __user *arg)
+{
+	struct apml_tsi_xfer_msg msg = { 0 };
+	int ret;
+
+	if (data->detached)
+		return -ENODEV;
+
+	if (copy_from_user(&msg, arg, sizeof(struct apml_tsi_xfer_msg)))
+		return -EFAULT;
+
+	if (msg.pad)
+		return -EINVAL;
+
+	ret = sbtsi_xfer_ioctl(data, msg.reg_addr, &msg.data_in_out, msg.rflag);
+
+	if (msg.rflag && !ret) {
+		if (copy_to_user(arg, &msg, sizeof(struct apml_tsi_xfer_msg)))
+			return -EFAULT;
+	}
+	return ret;
+}
+
+static int sbtsi_open(struct inode *inode, struct file *fp)
+{
+	struct sbtsi_data *data;
+
+	data = container_of(fp->private_data, struct sbtsi_data, sbtsi_misc_dev);
+	if (data->detached)
+		return -ENODEV;
+
+	kref_get(&data->kref);
+
+	return 0;
+}
+
+static int sbtsi_release(struct inode *inode, struct file *fp)
+{
+	struct sbtsi_data *data;
+
+	data = container_of(fp->private_data, struct sbtsi_data, sbtsi_misc_dev);
+	kref_put(&data->kref, sbtsi_data_release);
+	return 0;
+}
+
+static long sbtsi_ioctl(struct file *fp, unsigned int cmd, unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	struct sbtsi_data *data;
+
+	data = container_of(fp->private_data, struct sbtsi_data, sbtsi_misc_dev);
+	switch (cmd) {
+	case SBTSI_IOCTL_REG_XFER_CMD:
+		return apml_tsi_reg_xfer(data, argp);
+	default:
+		return -ENOTTY;
+	}
+}
+
+static const struct file_operations sbtsi_fops = {
+	.owner		= THIS_MODULE,
+	.open		= sbtsi_open,
+	.release	= sbtsi_release,
+	.unlocked_ioctl	= sbtsi_ioctl,
+	.compat_ioctl	= compat_ptr_ioctl,
+};
+
+int create_misc_tsi_device(struct sbtsi_data *data, struct device *dev)
+{
+	int ret;
+
+	data->sbtsi_misc_dev.name = devm_kasprintf(dev, GFP_KERNEL,
+						   "sbtsi-%x", data->dev_addr);
+	if (!data->sbtsi_misc_dev.name)
+		return -ENOMEM;
+	data->sbtsi_misc_dev.minor    = MISC_DYNAMIC_MINOR;
+	data->sbtsi_misc_dev.fops     = &sbtsi_fops;
+	data->sbtsi_misc_dev.parent   = dev;
+	data->sbtsi_misc_dev.nodename = devm_kasprintf(dev, GFP_KERNEL,
+						       "sbtsi-%x", data->dev_addr);
+	if (!data->sbtsi_misc_dev.nodename)
+		return -ENOMEM;
+	data->sbtsi_misc_dev.mode = 0600;
+
+	ret = misc_register(&data->sbtsi_misc_dev);
+	if (ret)
+		return ret;
+
+	return 0;
+}
diff --git a/drivers/misc/amd-sbi/tsi-core.h b/drivers/misc/amd-sbi/tsi-core.h
index 7dde040caf30..c0849c704c7b 100644
--- a/drivers/misc/amd-sbi/tsi-core.h
+++ b/drivers/misc/amd-sbi/tsi-core.h
@@ -20,4 +20,7 @@ struct sbtsi_i3c_priv {
 	u8 buf[2];
 };
 
+int create_misc_tsi_device(struct sbtsi_data *data, struct device *dev);
+
+void sbtsi_data_release(struct kref *kref);
 #endif /* _LINUX_TSI_CORE_H_ */
diff --git a/drivers/misc/amd-sbi/tsi.c b/drivers/misc/amd-sbi/tsi.c
index 8fb17ccab73d..6649cd8cdf85 100644
--- a/drivers/misc/amd-sbi/tsi.c
+++ b/drivers/misc/amd-sbi/tsi.c
@@ -42,6 +42,21 @@ static void sbtsi_unregister_hwmon_adev(void *_adev)
 	auxiliary_device_uninit(adev);
 }
 
+static void sbtsi_misc_unregister(void *arg)
+{
+	struct sbtsi_data *data = arg;
+
+	misc_deregister(&data->sbtsi_misc_dev);
+	data->detached = true;
+}
+
+static void sbtsi_driver_unref(void *arg)
+{
+	struct sbtsi_data *data = arg;
+
+	kref_put(&data->kref, sbtsi_data_release);
+}
+
 /*
  * Create and publish an auxiliary device. The hwmon driver in
  * drivers/hwmon/sbtsi_temp.c binds to this device.
@@ -89,6 +104,13 @@ static int sbtsi_probe_common(struct device *dev, struct sbtsi_data *data)
 	u8 val;
 	int err;
 
+	mutex_init(&data->lock);
+	kref_init(&data->kref);
+
+	err = devm_add_action_or_reset(dev, sbtsi_driver_unref, data);
+	if (err)
+		return err;
+
 	err = sbtsi_xfer(data, SBTSI_REG_CONFIG, &val, true);
 	if (err)
 		return err;
@@ -97,7 +119,15 @@ static int sbtsi_probe_common(struct device *dev, struct sbtsi_data *data)
 	data->read_order = FIELD_GET(BIT(SBTSI_CONFIG_READ_ORDER_SHIFT), val);
 
 	dev_set_drvdata(dev, data);
-	return sbtsi_create_hwmon_adev(dev, data->dev_addr);
+	err = sbtsi_create_hwmon_adev(dev, data->dev_addr);
+	if (err < 0)
+		return err;
+
+	err = create_misc_tsi_device(data, dev);
+	if (err)
+		return err;
+
+	return devm_add_action(dev, sbtsi_misc_unregister, data);
 }
 
 static int sbtsi_i2c_probe(struct i2c_client *client)
@@ -105,7 +135,7 @@ static int sbtsi_i2c_probe(struct i2c_client *client)
 	struct device *dev = &client->dev;
 	struct sbtsi_data *data;
 
-	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	data = kzalloc_obj(*data);
 	if (!data)
 		return -ENOMEM;
 
@@ -157,7 +187,7 @@ static int sbtsi_i3c_probe(struct i3c_device *i3cdev)
 	if (I3C_PID_INSTANCE_ID(devinfo.pid) != 0)
 		return -ENXIO;
 
-	i3c_priv = devm_kzalloc(dev, sizeof(*i3c_priv), GFP_KERNEL);
+	i3c_priv = kzalloc_obj(*i3c_priv);
 	if (!i3c_priv)
 		return -ENOMEM;
 
diff --git a/include/linux/misc/tsi.h b/include/linux/misc/tsi.h
index 02c90ec285ec..3ce3770d1ad5 100644
--- a/include/linux/misc/tsi.h
+++ b/include/linux/misc/tsi.h
@@ -8,30 +8,45 @@
 #ifndef _LINUX_MISC_TSI_H_
 #define _LINUX_MISC_TSI_H_
 
+#include <linux/cleanup.h>
 #include <linux/i2c.h>
 #include <linux/i3c/device.h>
+#include <linux/kref.h>
+#include <linux/miscdevice.h>
+#include <linux/mutex.h>
 #include <linux/types.h>
 
 /**
  * struct sbtsi_data - driver private data for an AMD SB-TSI device
  * @client:	underlying I2C client
  * @i3cdev:	underlying I3C device (when using I3C bus)
+ * @sbtsi_misc_dev: miscdevice exposing ioctl interface at /dev/sbtsi-<addr>
+ * @lock:           mutex protecting concurrent access to the device
+ * @kref:      reference count; keeps @sbtsi_data alive while misc fds are open
  * @dev_addr:	I2C/I3C device address, used to name the misc device node
  * @ext_range_mode:	sensor uses extended temperature range
  * @read_order:	if set, decimal part must be read before integer part
  * @is_i3c:	true when the device is accessed over I3C
+ * @detached:  set on driver unbind; open/ioctl return -ENODEV afterward
  */
 struct sbtsi_data {
 	union {
 		struct i2c_client *client;
 		struct i3c_device *i3cdev;
 	};
+	struct miscdevice sbtsi_misc_dev;
+	struct mutex lock;	/* protects concurrent access to the device */
+	struct kref kref;
 	u8 dev_addr;
 	bool ext_range_mode;
 	bool read_order;
 	bool is_i3c;
+	bool detached;
 };
 
+DEFINE_GUARD(sbtsi, struct sbtsi_data *, mutex_lock(&_T->lock),
+	     mutex_unlock(&_T->lock))
+
 /*
  * Name of the auxiliary device published on the auxiliary bus by the core
  * driver.  The full device name is "amd-sbtsi.temp-sensor.<id>". where
diff --git a/include/uapi/misc/amd-apml.h b/include/uapi/misc/amd-apml.h
index 745b3338fc06..8a85f79b0938 100644
--- a/include/uapi/misc/amd-apml.h
+++ b/include/uapi/misc/amd-apml.h
@@ -73,6 +73,13 @@ struct apml_reg_xfer_msg {
 	__u8 rflag;
 };
 
+struct apml_tsi_xfer_msg {
+	__u8 reg_addr;		/* TSI register address offset */
+	__u8 data_in_out;	/* Register data for read/write */
+	__u8 rflag;		/* Register read or write */
+	__u8 pad;		/* Explicit padding */
+};
+
 /*
  * AMD sideband interface base IOCTL
  */
@@ -149,4 +156,20 @@ struct apml_reg_xfer_msg {
  */
 #define SBRMI_IOCTL_REG_XFER_CMD	_IOWR(SB_BASE_IOCTL_NR, 3, struct apml_reg_xfer_msg)
 
+/**
+ * DOC: SBTSI_IOCTL_REG_XFER_CMD
+ *
+ * @Parameters
+ *
+ * @struct apml_tsi_xfer_msg
+ *	Pointer to the &struct apml_tsi_xfer_msg that will contain the protocol
+ *	information
+ *
+ * @Description
+ * IOCTL command for APML TSI messages using generic _IOWR
+ * The IOCTL provides userspace access to AMD sideband TSI register xfer protocol
+ * - TSI protocol to read/write temperature sensor registers
+ */
+#define SBTSI_IOCTL_REG_XFER_CMD	_IOWR(SB_BASE_IOCTL_NR, 4, struct apml_tsi_xfer_msg)
+
 #endif /*_AMD_APML_H_*/
-- 
2.34.1


  parent reply	other threads:[~2026-06-22 13:59 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-22 13:58 [PATCH v3 0/8] misc: amd-sbi: Refactor SBTSI driver with I3C support and ioctl interface Akshay Gupta
2026-06-22 13:58 ` [PATCH v3 1/8] hwmon/misc: amd-sbi: Move core sbtsi support from hwmon to misc Akshay Gupta
2026-06-22 13:58 ` [PATCH v3 2/8] hwmon: sbtsi_temp: Refactor temperature register access into helpers Akshay Gupta
2026-06-22 13:58 ` [PATCH v3 3/8] hwmon/misc: amd-sbi: Move sbtsi register transfer to core abstraction Akshay Gupta
2026-06-22 13:58 ` [PATCH v3 4/8] misc: amd-sbi: Consolidate Common SBTSI Probe Path for I2C and I3C Akshay Gupta
2026-06-22 13:58 ` [PATCH v3 5/8] misc: amd-sbi: Add support for SB-TSI over I3C Akshay Gupta
2026-06-22 13:58 ` Akshay Gupta [this message]
2026-06-22 13:58 ` [PATCH v3 7/8] hwmon: Add mutex protecting for sbtsi read/write through hwmon Akshay Gupta
2026-06-22 13:58 ` [PATCH v3 8/8] docs: misc: amd-sbi: Document SBTSI userspace interface Akshay Gupta
2026-06-22 16:57   ` Randy Dunlap

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260622135821.2190260-7-Akshay.Gupta@amd.com \
    --to=akshay.gupta@amd.com \
    --cc=Anand.Umarji@amd.com \
    --cc=NaveenKrishna.Chatradhi@amd.com \
    --cc=Prathima.Lk@amd.com \
    --cc=arnd@arndb.de \
    --cc=corbet@lwn.net \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=skhan@linuxfoundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox