[PATCH 0/6] Add support for MAX20830C and MAX20840C step-down DC-DC switching regulator

[Alexis Czezar Torreno <alexisczezar.torreno@analog.com>]

This series adds a few features before adding support to MAX20830C and
MAX20840C.

Patches 1 and 2 adds an enable gpio that should have been included before.

Patches 3 and 4 adds new resistor feedback properties that is needed to
properly scale VOUT

Patches 5 and 6 adds support for devices MAX20830C and MAX20840C.

MAX20830C and MAX20840 are step-down DC-DC switching regulator with PMBus
interface. MAX20830C is a different packaging for MAX20830, and MAX20840C
supports 40A regulation compared to MAX20830 that is only 30A.

Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
---
Alexis Czezar Torreno (6):
      dt-bindings: hwmon: (pmbus/max20830): add enable-gpios property
      hwmon: (pmbus/max20830): add support for enable GPIO
      dt-bindings: hwmon: (pmbus/max20830): add VOUT feedback resistor properties
      hwmon: (pmbus/max20830): add VOUT feedback resistor scaling support
      dt-bindings: hwmon: (pmbus/max20830): add max20830c and max20840c support
      hwmon: (pmbus/max20830): add support for max20830c and max20840c

 .../bindings/hwmon/pmbus/adi,max20830.yaml         |  30 +++++-
 Documentation/hwmon/max20830.rst                   |  27 ++++-
 drivers/hwmon/pmbus/max20830.c                     | 117 +++++++++++++++++----
 3 files changed, 148 insertions(+), 26 deletions(-)
---
base-commit: 1a42625604046790ea8ec61c2a749bbf76b28943
change-id: 20260630-dev-max20830c-9d38d8b0a765

Best regards,
-- 
Alexis Czezar Torreno <alexisczezar.torreno@analog.com>