[PATCH 2/6] iio: backend: Add support for CRC

[Janani Sunil <janani.sunil@analog.com>]

Add a backend operation to enable or disable Cyclic Redundancy Check
processing for data integrity verification. When enabled, the backend
will generate, verify, or process CRC information for data samples
transmitted over the interface, allowing the host to detect corrupted
samples.

Signed-off-by: Janani Sunil <janani.sunil@analog.com>
---
 drivers/iio/industrialio-backend.c | 33 +++++++++++++++++++++++++++++++++
 include/linux/iio/backend.h        |  4 ++++
 2 files changed, 37 insertions(+)

diff --git a/drivers/iio/industrialio-backend.c b/drivers/iio/industrialio-backend.c
index f7a4be8ec320..379a426931cd 100644
--- a/drivers/iio/industrialio-backend.c
+++ b/drivers/iio/industrialio-backend.c
@@ -886,6 +886,39 @@ int iio_backend_num_lanes_set(struct iio_backend *back, unsigned int num_lanes)
 }
 EXPORT_SYMBOL_NS_GPL(iio_backend_num_lanes_set, "IIO_BACKEND");
 
+/**
+ * iio_backend_crc_enable - Enable the CRC generation.
+ * @back: Backend device
+ *
+ * Enable Cyclic Redundancy Check processing for data integrity
+ * verification. When enabled, the backend will generate, verify, or process
+ * CRC information for data samples transmitted over the interface.
+ *
+ * RETURNS:
+ * 0 on success, negative error number on failure.
+ */
+int iio_backend_crc_enable(struct iio_backend *back)
+{
+	return iio_backend_op_call(back, crc_enable);
+}
+EXPORT_SYMBOL_NS_GPL(iio_backend_crc_enable, "IIO_BACKEND");
+
+/**
+ * iio_backend_crc_disable - Disable the CRC generation.
+ * @back: Backend device
+ *
+ * Disable Cyclic Redundancy Check processing. When disabled, the backend
+ * will stop generating, verifying, or processing CRC information for data samples.
+ *
+ * RETURNS:
+ * 0 on success, negative error number on failure.
+ */
+int iio_backend_crc_disable(struct iio_backend *back)
+{
+	return iio_backend_op_call(back, crc_disable);
+}
+EXPORT_SYMBOL_NS_GPL(iio_backend_crc_disable, "IIO_BACKEND");
+
 /**
  * iio_backend_ddr_enable - Enable interface DDR (Double Data Rate) mode
  * @back: Backend device
diff --git a/include/linux/iio/backend.h b/include/linux/iio/backend.h
index 3f95ed1fdf9e..197cf1ad5e68 100644
--- a/include/linux/iio/backend.h
+++ b/include/linux/iio/backend.h
@@ -189,6 +189,8 @@ struct iio_backend_ops {
 			       enum iio_backend_filter_type type);
 	int (*interface_data_align)(struct iio_backend *back, u32 timeout_us);
 	int (*num_lanes_set)(struct iio_backend *back, unsigned int num_lanes);
+	int (*crc_enable)(struct iio_backend *back);
+	int (*crc_disable)(struct iio_backend *back);
 	int (*ddr_enable)(struct iio_backend *back);
 	int (*ddr_disable)(struct iio_backend *back);
 	int (*data_stream_enable)(struct iio_backend *back);
@@ -237,6 +239,8 @@ int iio_backend_filter_type_set(struct iio_backend *back,
 				enum iio_backend_filter_type type);
 int iio_backend_interface_data_align(struct iio_backend *back, u32 timeout_us);
 int iio_backend_num_lanes_set(struct iio_backend *back, unsigned int num_lanes);
+int iio_backend_crc_enable(struct iio_backend *back);
+int iio_backend_crc_disable(struct iio_backend *back);
 int iio_backend_ddr_enable(struct iio_backend *back);
 int iio_backend_ddr_disable(struct iio_backend *back);
 int iio_backend_data_stream_enable(struct iio_backend *back);

-- 
2.43.0