[PATCH v3] mm/page_reporting: Add page_reporting_delay_ms module parameter

[pratmal@google.com]

From: Pratyush Mallick <pratmal@google.com>

Currently, the free page reporting uses a hardcoded delay of
(2 HZ) between reporting intervals. While this is a reasonable
default, it lacks the flexibility to adapt to varying guest workloads.

A low delay allows aggressive memory reclamation, returning unused
pages to the host as quickly as possible. However, during spiky
allocation/free churn, this immediate reporting can lead to a severe
performance penalty (nested page faults) as the guest re-allocates memory
that the host has just unmapped. In these scenarios, there is benefit
from increasing the delay to batch free pages over a longer window,
absorbing the churn without hypercall and re-fault overhead.

This patch exposes the delay as a module parameter:
/sys/module/page_reporting/parameters/page_reporting_delay_ms, measured
in milliseconds and defaults to 2000ms.

Signed-off-by: Pratyush Mallick <pratmal@google.com>
---
v3:
 - Converted page_reporting_delay_ms from a sysctl to a module parameter.
 - Dropped the max value cap (PAGE_REPORTING_DELAY_MS_MAX).
 - Documented page_reporting_delay_ms in kernel-parameters.txt.
 - Updated code comments in mm/page_reporting.c.
 - v2: https://lore.kernel.org/linux-mm/3da27fde-25dc-4cb8-8e05-74cd26fc2f7c@kernel.org/T/#t

v2:
 - Documented page_reporting_delay_ms in Documentation/admin-guide/sysctl/vm.rst.
 - v1: https://lore.kernel.org/linux-mm/20260722192935.1646848-1-pratmal@google.com/T/#u

v1: Fixed feedback from RFC.
 - Added lower and upper cap to sysctl value.
 - Reverted the reordering on page_reporting_delay_ms.
 - Dropped the mod_delayed_work() change.
 - RFC: https://lore.kernel.org/linux-mm/20260714171456.2350037-1-pratmal@google.com/T/#u
 .../admin-guide/kernel-parameters.txt         |  6 ++++++
 mm/page_reporting.c                           | 21 ++++++++++++-------
 2 files changed, 19 insertions(+), 8 deletions(-)

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index b5493a7f8f22..364c2dce8e70 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -4810,6 +4810,12 @@ Kernel parameters
 			Adjust the minimal page reporting order. The page
 			reporting is disabled when it exceeds MAX_PAGE_ORDER.
 
+	page_reporting.page_reporting_delay_ms=
+			[KNL] Free page reporting delay in milliseconds
+			Format: <unsigned integer>
+			Adjust the delay in milliseconds between free page
+			reporting intervals. Default is 2000 (2 seconds).
+
 	panic=		[KNL] Kernel behaviour on panic: delay <timeout>
 			timeout > 0: seconds before rebooting
 			timeout = 0: wait forever
diff --git a/mm/page_reporting.c b/mm/page_reporting.c
index 942e84b6908a..a67311468204 100644
--- a/mm/page_reporting.c
+++ b/mm/page_reporting.c
@@ -47,7 +47,11 @@ MODULE_PARM_DESC(page_reporting_order, "Set page reporting order");
  */
 EXPORT_SYMBOL_GPL(page_reporting_order);
 
-#define PAGE_REPORTING_DELAY	(2 * HZ)
+static unsigned int page_reporting_delay_ms = 2 * MSEC_PER_SEC;
+module_param(page_reporting_delay_ms, uint, 0644);
+MODULE_PARM_DESC(page_reporting_delay_ms,
+		 "Set page reporting delay in milliseconds");
+
 static struct page_reporting_dev_info __rcu *pr_dev_info __read_mostly;
 
 enum {
@@ -76,11 +80,11 @@ __page_reporting_request(struct page_reporting_dev_info *prdev)
 		return;
 
 	/*
-	 * Delay the start of work to allow a sizable queue to build. For
-	 * now we are limiting this to running no more than once every
-	 * couple of seconds.
+	 * Delay the start of work to allow a sizable queue to build.
+	 * We limit this based on page_reporting_delay_ms.
 	 */
-	schedule_delayed_work(&prdev->work, PAGE_REPORTING_DELAY);
+	schedule_delayed_work(&prdev->work,
+			      msecs_to_jiffies(page_reporting_delay_ms));
 }
 
 /* notify prdev of free page reporting request */
@@ -335,12 +339,13 @@ static void page_reporting_process(struct work_struct *work)
 err_out:
 	/*
 	 * If the state has reverted back to requested then there may be
-	 * additional pages to be processed. We will defer for 2s to allow
-	 * more pages to accumulate.
+	 * additional pages to be processed. We will defer by
+	 * page_reporting_delay_ms to allow more pages to accumulate.
 	 */
 	state = atomic_cmpxchg(&prdev->state, state, PAGE_REPORTING_IDLE);
 	if (state == PAGE_REPORTING_REQUESTED)
-		schedule_delayed_work(&prdev->work, PAGE_REPORTING_DELAY);
+		schedule_delayed_work(&prdev->work,
+				      msecs_to_jiffies(page_reporting_delay_ms));
 }
 
 static DEFINE_MUTEX(page_reporting_mutex);
-- 
2.55.0.229.g6434b31f56-goog