[PATCH 1/3] hwmon: (asus_rog_ryujin) Add per-device configuration

[Arie Miller <renari@arimil.com>]

Move model-specific report offsets and capabilities into a device
information structure. This prepares the driver for coolers which use
a different report layout or do not include the external fan
controller, while preserving the existing Ryujin II 360 behavior.

Assisted-by: Codex:gpt-5.6-sol sparse
Signed-off-by: Arie Miller <renari@arimil.com>
---
 drivers/hwmon/asus_rog_ryujin.c | 72 ++++++++++++++++++++++-----------
 1 file changed, 49 insertions(+), 23 deletions(-)

diff --git a/drivers/hwmon/asus_rog_ryujin.c b/drivers/hwmon/asus_rog_ryujin.c
index 10a1f5aca988..b86b87e33615 100644
--- a/drivers/hwmon/asus_rog_ryujin.c
+++ b/drivers/hwmon/asus_rog_ryujin.c
@@ -18,15 +18,25 @@
 #define USB_VENDOR_ID_ASUS_ROG		0x0b05
 #define USB_PRODUCT_ID_RYUJIN_AIO	0x1988	/* ASUS ROG RYUJIN II 360 */
 
+struct rog_ryujin_device_info {
+	u8 temp_offset;
+	u8 pump_speed_offset;
+	u8 fan_speed_offset;
+	u8 duty_channel;
+	bool has_controller;
+};
+
+static const struct rog_ryujin_device_info rog_ryujin_ii_360_info = {
+	.temp_offset = 3,
+	.pump_speed_offset = 5,
+	.fan_speed_offset = 7,
+	.duty_channel = 0,
+	.has_controller = true,
+};
+
 #define STATUS_VALIDITY		1500	/* ms */
 #define MAX_REPORT_LENGTH	65
 
-/* Cooler status report offsets */
-#define RYUJIN_TEMP_SENSOR_1		3
-#define RYUJIN_TEMP_SENSOR_2		4
-#define RYUJIN_PUMP_SPEED		5
-#define RYUJIN_INTERNAL_FAN_SPEED	7
-
 /* Cooler duty report offsets */
 #define RYUJIN_PUMP_DUTY		4
 #define RYUJIN_INTERNAL_FAN_DUTY	5
@@ -81,6 +91,7 @@ static const char *const rog_ryujin_speed_label[] = {
 struct rog_ryujin_data {
 	struct hid_device *hdev;
 	struct device *hwmon_dev;
+	const struct rog_ryujin_device_info *info;
 	/* For reinitializing the completions below */
 	spinlock_t status_report_request_lock;
 	struct completion cooler_status_received;
@@ -112,6 +123,8 @@ static int rog_ryujin_pwm_to_percent(long val)
 static umode_t rog_ryujin_is_visible(const void *data,
 				     enum hwmon_sensor_types type, u32 attr, int channel)
 {
+	const struct rog_ryujin_data *priv = data;
+
 	switch (type) {
 	case hwmon_temp:
 		switch (attr) {
@@ -123,6 +136,8 @@ static umode_t rog_ryujin_is_visible(const void *data,
 		}
 		break;
 	case hwmon_fan:
+		if (channel >= 2 && !priv->info->has_controller)
+			return 0;
 		switch (attr) {
 		case hwmon_fan_label:
 		case hwmon_fan_input:
@@ -132,6 +147,8 @@ static umode_t rog_ryujin_is_visible(const void *data,
 		}
 		break;
 	case hwmon_pwm:
+		if (channel >= 2 && !priv->info->has_controller)
+			return 0;
 		switch (attr) {
 		case hwmon_pwm_input:
 			return 0644;
@@ -198,12 +215,14 @@ static int rog_ryujin_get_status(struct rog_ryujin_data *priv)
 	if (ret < 0)
 		return ret;
 
-	/* Retrieve controller status (speeds) */
-	ret =
-	    rog_ryujin_execute_cmd(priv, get_controller_speed_cmd, GET_CMD_LENGTH,
-				   &priv->controller_status_received);
-	if (ret < 0)
-		return ret;
+	if (priv->info->has_controller) {
+		/* Retrieve controller status (speeds) */
+		ret = rog_ryujin_execute_cmd(priv, get_controller_speed_cmd,
+					     GET_CMD_LENGTH,
+					     &priv->controller_status_received);
+		if (ret < 0)
+			return ret;
+	}
 
 	/* Retrieve cooler duty */
 	ret =
@@ -212,12 +231,14 @@ static int rog_ryujin_get_status(struct rog_ryujin_data *priv)
 	if (ret < 0)
 		return ret;
 
-	/* Retrieve controller duty */
-	ret =
-	    rog_ryujin_execute_cmd(priv, get_controller_duty_cmd, GET_CMD_LENGTH,
-				   &priv->controller_duty_received);
-	if (ret < 0)
-		return ret;
+	if (priv->info->has_controller) {
+		/* Retrieve controller duty */
+		ret = rog_ryujin_execute_cmd(priv, get_controller_duty_cmd,
+					     GET_CMD_LENGTH,
+					     &priv->controller_duty_received);
+		if (ret < 0)
+			return ret;
+	}
 
 	priv->updated = jiffies;
 	return 0;
@@ -289,6 +310,7 @@ static int rog_ryujin_write_fixed_duty(struct rog_ryujin_data *priv, int channel
 			return ret;
 
 		memcpy(set_cmd, set_cooler_duty_cmd, SET_CMD_LENGTH);
+		set_cmd[2] = priv->info->duty_channel;
 
 		/* Cooler duties are set as 0-100% */
 		val = rog_ryujin_pwm_to_percent(val);
@@ -394,10 +416,12 @@ static int rog_ryujin_raw_event(struct hid_device *hdev, struct hid_report *repo
 
 	if (data[1] == RYUJIN_GET_COOLER_STATUS_CMD_RESPONSE) {
 		/* Received coolant temp and speeds of pump and internal fan */
-		priv->temp_input[0] =
-		    data[RYUJIN_TEMP_SENSOR_1] * 1000 + data[RYUJIN_TEMP_SENSOR_2] * 100;
-		priv->speed_input[0] = get_unaligned_le16(data + RYUJIN_PUMP_SPEED);
-		priv->speed_input[1] = get_unaligned_le16(data + RYUJIN_INTERNAL_FAN_SPEED);
+		priv->temp_input[0] = data[priv->info->temp_offset] * 1000 +
+			data[priv->info->temp_offset + 1] * 100;
+		priv->speed_input[0] =
+			get_unaligned_le16(data + priv->info->pump_speed_offset);
+		priv->speed_input[1] =
+			get_unaligned_le16(data + priv->info->fan_speed_offset);
 
 		if (!completion_done(&priv->cooler_status_received))
 			complete_all(&priv->cooler_status_received);
@@ -476,6 +500,7 @@ static int rog_ryujin_probe(struct hid_device *hdev, const struct hid_device_id
 		return -ENOMEM;
 
 	priv->hdev = hdev;
+	priv->info = (const struct rog_ryujin_device_info *)id->driver_data;
 	hid_set_drvdata(hdev, priv);
 
 	/*
@@ -546,7 +571,8 @@ static void rog_ryujin_remove(struct hid_device *hdev)
 }
 
 static const struct hid_device_id rog_ryujin_table[] = {
-	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUS_ROG, USB_PRODUCT_ID_RYUJIN_AIO) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUS_ROG, USB_PRODUCT_ID_RYUJIN_AIO),
+	  .driver_data = (kernel_ulong_t)&rog_ryujin_ii_360_info },
 	{ }
 };
 
-- 
2.55.0