[PATCH v2] hwmon: (asus_wmi_sensors) Reword BIOS upgrade advice

[Qian Xiao <heyheyco@gmail.com>]

The Known Issues section suggests that upgrading to a BIOS with WMI
method version two or greater should rectify the problem. However, the
driver refuses to bind when the BIOS reports a version below two, so
every system using the driver already meets that condition and the
advice does not help.

Instead, suggest that upgrading to a more recent BIOS version might
help. While at it, fix a typo in the preceding sentence.

Link: https://lore.kernel.org/linux-hwmon/CAFGXJCm6ZWK0NsFhZ1_ycgYtTTT3nhqj9mose60t+Rrry1aPvw@mail.gmail.com/
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Qian Xiao <heyheyco@gmail.com>
---
v2: Suggest upgrading to a more recent BIOS instead of dropping the
    advice entirely (Guenter).
v1: https://lore.kernel.org/linux-hwmon/20261014233318.34567-1-heyheyco@gmail.com/

 Documentation/hwmon/asus_wmi_sensors.rst | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/Documentation/hwmon/asus_wmi_sensors.rst b/Documentation/hwmon/asus_wmi_sensors.rst
index 8f2096c..741111c 100644
--- a/Documentation/hwmon/asus_wmi_sensors.rst
+++ b/Documentation/hwmon/asus_wmi_sensors.rst
@@ -72,7 +72,6 @@ Known Issues:
    X470 Pro seems particularly bad for this. The more frequently the WMI
    interface is polled the greater the potential for this to happen. Until you
    have subjected your computer to an extended soak test while polling the
-   sensors frequently, don't leave you computer unattended. Upgrading to new
-   BIOS version with method version greater than or equal to two should
-   rectify the issue.
+   sensors frequently, don't leave your computer unattended. Upgrading to a
+   more recent BIOS version might help.
  * A few boards report 12v voltages to be ~10v.
-- 
2.53.0