linux-doc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lu Baolu <baolu.lu@linux.intel.com>
To: John Garry <john.garry@huawei.com>,
	joro@8bytes.org, will@kernel.org, dwmw2@infradead.org,
	robin.murphy@arm.com, corbet@lwn.net
Cc: baolu.lu@linux.intel.com, linux-kernel@vger.kernel.org,
	iommu@lists.linux-foundation.org, linuxarm@huawei.com,
	thunder.leizhen@huawei.com, chenxiang66@hisilicon.com,
	linux-doc@vger.kernel.org
Subject: Re: [PATCH v14 1/6] iommu: Deprecate Intel and AMD cmdline methods to enable strict mode
Date: Fri, 18 Jun 2021 21:09:40 +0800	[thread overview]
Message-ID: <31d7ec79-79e8-4ae9-6705-e08c1256f432@linux.intel.com> (raw)
In-Reply-To: <1624016058-189713-2-git-send-email-john.garry@huawei.com>

On 2021/6/18 19:34, John Garry wrote:
> Now that the x86 drivers support iommu.strict, deprecate the custom
> methods.
> 
> Signed-off-by: John Garry <john.garry@huawei.com>
> Acked-by: Robin Murphy <robin.murphy@arm.com>
> ---
>   Documentation/admin-guide/kernel-parameters.txt | 9 ++-------
>   drivers/iommu/amd/init.c                        | 4 +++-
>   drivers/iommu/intel/iommu.c                     | 1 +
>   3 files changed, 6 insertions(+), 8 deletions(-)
> 
> diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
> index 30e9dd52464e..673952379900 100644
> --- a/Documentation/admin-guide/kernel-parameters.txt
> +++ b/Documentation/admin-guide/kernel-parameters.txt
> @@ -290,10 +290,7 @@
>   	amd_iommu=	[HW,X86-64]
>   			Pass parameters to the AMD IOMMU driver in the system.
>   			Possible values are:
> -			fullflush - enable flushing of IO/TLB entries when
> -				    they are unmapped. Otherwise they are
> -				    flushed before they will be reused, which
> -				    is a lot of faster
> +			fullflush - Deprecated, equivalent to iommu.strict=1
>   			off	  - do not initialize any AMD IOMMU found in
>   				    the system
>   			force_isolation - Force device isolation for all
> @@ -1948,9 +1945,7 @@
>   			this case, gfx device will use physical address for
>   			DMA.
>   		strict [Default Off]
> -			With this option on every unmap_single operation will
> -			result in a hardware IOTLB flush operation as opposed
> -			to batching them for performance.
> +			Deprecated, equivalent to iommu.strict=1.
>   		sp_off [Default Off]
>   			By default, super page will be supported if Intel IOMMU
>   			has the capability. With this option, super page will
> diff --git a/drivers/iommu/amd/init.c b/drivers/iommu/amd/init.c
> index 46280e6e1535..3a2fb805f11e 100644
> --- a/drivers/iommu/amd/init.c
> +++ b/drivers/iommu/amd/init.c
> @@ -3098,8 +3098,10 @@ static int __init parse_amd_iommu_intr(char *str)
>   static int __init parse_amd_iommu_options(char *str)
>   {
>   	for (; *str; ++str) {
> -		if (strncmp(str, "fullflush", 9) == 0)
> +		if (strncmp(str, "fullflush", 9) == 0) {
> +			pr_warn("amd_iommu=fullflush deprecated; use iommu.strict=1 instead\n");
>   			amd_iommu_unmap_flush = true;
> +		}
>   		if (strncmp(str, "force_enable", 12) == 0)
>   			amd_iommu_force_enable = true;
>   		if (strncmp(str, "off", 3) == 0)
> diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
> index bd93c7ec879e..29497113d748 100644
> --- a/drivers/iommu/intel/iommu.c
> +++ b/drivers/iommu/intel/iommu.c
> @@ -454,6 +454,7 @@ static int __init intel_iommu_setup(char *str)
>   			pr_warn("intel_iommu=forcedac deprecated; use iommu.forcedac instead\n");
>   			iommu_dma_forcedac = true;
>   		} else if (!strncmp(str, "strict", 6)) {
> +			pr_warn("intel_iommu=strict deprecated; use iommu.strict=1 instead\n");
>   			pr_info("Disable batched IOTLB flush\n");
>   			intel_iommu_strict = 1;
>   		} else if (!strncmp(str, "sp_off", 6)) {
> 

Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>

Best regards,
baolu

  reply	other threads:[~2021-06-18 13:09 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-18 11:34 [PATCH v14 0/6] iommu: Enhance IOMMU default DMA mode build options John Garry
2021-06-18 11:34 ` [PATCH v14 1/6] iommu: Deprecate Intel and AMD cmdline methods to enable strict mode John Garry
2021-06-18 13:09   ` Lu Baolu [this message]
2021-06-18 11:34 ` [PATCH v14 2/6] iommu: Print strict or lazy mode at init time John Garry
2021-06-18 13:10   ` Lu Baolu
2021-06-18 11:34 ` [PATCH v14 3/6] iommu: Enhance IOMMU default DMA mode build options John Garry
2021-06-18 13:11   ` Lu Baolu
2021-06-18 11:34 ` [PATCH v14 4/6] iommu/vt-d: Add support for " John Garry
2021-06-18 13:12   ` Lu Baolu
2021-06-18 11:34 ` [PATCH v14 5/6] iommu/amd: " John Garry
2021-06-18 11:34 ` [PATCH v14 6/6] iommu: Remove mode argument from iommu_set_dma_strict() John Garry
2021-06-18 13:13   ` Lu Baolu
2021-06-21  5:17   ` Lu Baolu
2021-06-21  8:12     ` John Garry
2021-06-21 10:00       ` Lu Baolu
2021-06-21 10:34         ` John Garry
2021-06-21 11:59           ` Robin Murphy
2021-06-21 12:08             ` John Garry
2021-06-21 14:32             ` Lu Baolu
2021-06-22 22:25               ` Robin Murphy
2021-06-23  7:21                 ` Lu Baolu
2021-06-25 16:41 ` [PATCH v14 0/6] iommu: Enhance IOMMU default DMA mode build options John Garry
2021-07-08  9:38   ` joro

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=31d7ec79-79e8-4ae9-6705-e08c1256f432@linux.intel.com \
    --to=baolu.lu@linux.intel.com \
    --cc=chenxiang66@hisilicon.com \
    --cc=corbet@lwn.net \
    --cc=dwmw2@infradead.org \
    --cc=iommu@lists.linux-foundation.org \
    --cc=john.garry@huawei.com \
    --cc=joro@8bytes.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxarm@huawei.com \
    --cc=robin.murphy@arm.com \
    --cc=thunder.leizhen@huawei.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).