From: Ross Philipson <ross.philipson@oracle.com>
To: Robin Murphy <robin.murphy@arm.com>,
linux-kernel@vger.kernel.org, x86@kernel.org,
iommu@lists.linux-foundation.org,
linux-integrity@vger.kernel.org, linux-doc@vger.kernel.org
Cc: dpsmith@apertussolutions.com, luto@amacapital.net,
mingo@redhat.com, bp@alien8.de, hpa@zytor.com,
tglx@linutronix.de, trenchboot-devel@googlegroups.com
Subject: Re: [PATCH v2 12/12] iommu: Do not allow IOMMU passthrough with Secure Launch
Date: Mon, 21 Jun 2021 13:51:35 -0400 [thread overview]
Message-ID: <34d05f0e-b24c-b8cf-c521-8b30cc1df532@oracle.com> (raw)
In-Reply-To: <53edcf0e-c094-876c-ac3d-7c9752e9ea99@arm.com>
On 6/18/21 2:32 PM, Robin Murphy wrote:
> On 2021-06-18 17:12, Ross Philipson wrote:
>> The IOMMU should always be set to default translated type after
>> the PMRs are disabled to protect the MLE from DMA.
>>
>> Signed-off-by: Ross Philipson <ross.philipson@oracle.com>
>> ---
>> drivers/iommu/intel/iommu.c | 5 +++++
>> drivers/iommu/iommu.c | 6 +++++-
>> 2 files changed, 10 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
>> index be35284..4f0256d 100644
>> --- a/drivers/iommu/intel/iommu.c
>> +++ b/drivers/iommu/intel/iommu.c
>> @@ -41,6 +41,7 @@
>> #include <linux/dma-direct.h>
>> #include <linux/crash_dump.h>
>> #include <linux/numa.h>
>> +#include <linux/slaunch.h>
>> #include <asm/irq_remapping.h>
>> #include <asm/cacheflush.h>
>> #include <asm/iommu.h>
>> @@ -2877,6 +2878,10 @@ static bool device_is_rmrr_locked(struct device
>> *dev)
>> */
>> static int device_def_domain_type(struct device *dev)
>> {
>> + /* Do not allow identity domain when Secure Launch is configured */
>> + if (slaunch_get_flags() & SL_FLAG_ACTIVE)
>> + return IOMMU_DOMAIN_DMA;
>
> Is this specific to Intel? It seems like it could easily be done
> commonly like the check for untrusted external devices.
It is currently Intel only but that will change. I will look into what
you suggest.
>
>> +
>> if (dev_is_pci(dev)) {
>> struct pci_dev *pdev = to_pci_dev(dev);
>> diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
>> index 808ab70d..d49b7dd 100644
>> --- a/drivers/iommu/iommu.c
>> +++ b/drivers/iommu/iommu.c
>> @@ -23,6 +23,7 @@
>> #include <linux/property.h>
>> #include <linux/fsl/mc.h>
>> #include <linux/module.h>
>> +#include <linux/slaunch.h>
>> #include <trace/events/iommu.h>
>> static struct kset *iommu_group_kset;
>> @@ -2761,7 +2762,10 @@ void iommu_set_default_passthrough(bool cmd_line)
>> {
>> if (cmd_line)
>> iommu_cmd_line |= IOMMU_CMD_LINE_DMA_API;
>> - iommu_def_domain_type = IOMMU_DOMAIN_IDENTITY;
>> +
>> + /* Do not allow identity domain when Secure Launch is configured */
>> + if (!(slaunch_get_flags() & SL_FLAG_ACTIVE))
>> + iommu_def_domain_type = IOMMU_DOMAIN_IDENTITY;
>
> Quietly ignoring the setting and possibly leaving iommu_def_domain_type
> uninitialised (note that 0 is not actually a usable type) doesn't seem
> great. AFAICS this probably warrants similar treatment to the
Ok so I guess it would be better to set it to IOMMU_DOMAIN_DMA event
though passthrough was requested. Or perhaps something more is needed here?
> mem_encrypt_active() case - there doesn't seem a great deal of value in
> trying to save users from themselves if they care about measured boot
> yet explicitly pass options which may compromise measured boot. If you
> really want to go down that route there's at least the sysfs interface
> you'd need to nobble as well, not to mention the various ways of
> completely disabling IOMMUs...
Doing a secure launch with the kernel is not a general purpose user use
case. A lot of work is done to secure the environment. Allowing
passthrough mode would leave the secure launch kernel exposed to DMA. I
think what we are trying to do here is what we intend though there may
be a better way or perhaps it is incomplete as you suggest.
>
> It might be reasonable to make IOMMU_DEFAULT_PASSTHROUGH depend on
> !SECURE_LAUNCH for clarity though.
This came from a specific request to not make disabling IOMMU modes
build time dependent. This is because a secure launch enabled kernel can
also be booted as a general purpose kernel in cases where this is desired.
Thank you,
Ross
>
> Robin.
>
>> }
>> void iommu_set_default_translated(bool cmd_line)
>>
next prev parent reply other threads:[~2021-06-21 17:52 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-18 16:12 [PATCH v2 00/12] x86: Trenchboot secure dynamic launch Linux kernel support Ross Philipson
2021-06-18 16:12 ` [PATCH v2 01/12] x86/boot: Place kernel_info at a fixed offset Ross Philipson
2021-06-18 16:12 ` [PATCH v2 02/12] x86: Secure Launch Kconfig Ross Philipson
2021-06-18 16:12 ` [PATCH v2 03/12] x86: Secure Launch main header file Ross Philipson
2021-06-18 16:12 ` [PATCH v2 04/12] x86: Add early SHA support for Secure Launch early measurements Ross Philipson
2021-06-18 16:12 ` [PATCH v2 05/12] x86: Secure Launch kernel early boot stub Ross Philipson
2021-06-18 16:12 ` [PATCH v2 06/12] x86: Secure Launch kernel late " Ross Philipson
2021-06-18 16:12 ` [PATCH v2 07/12] x86: Secure Launch SMP bringup support Ross Philipson
2021-06-18 16:12 ` [PATCH v2 08/12] kexec: Secure Launch kexec SEXIT support Ross Philipson
2021-06-18 16:12 ` [PATCH v2 09/12] reboot: Secure Launch SEXIT support on reboot paths Ross Philipson
2021-06-18 16:12 ` [PATCH v2 10/12] x86: Secure Launch late initcall platform module Ross Philipson
2021-06-18 16:12 ` [PATCH v2 11/12] tpm: Allow locality 2 to be set when initializing the TPM for Secure Launch Ross Philipson
2021-06-18 16:12 ` [PATCH v2 12/12] iommu: Do not allow IOMMU passthrough with " Ross Philipson
2021-06-18 18:32 ` Robin Murphy
2021-06-21 17:51 ` Ross Philipson [this message]
2021-06-21 21:15 ` Andy Lutomirski
2021-06-30 9:50 ` Ross Philipson
2021-08-04 3:05 ` Daniel P. Smith
2021-06-22 11:06 ` Robin Murphy
2021-06-30 9:47 ` Ross Philipson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=34d05f0e-b24c-b8cf-c521-8b30cc1df532@oracle.com \
--to=ross.philipson@oracle.com \
--cc=bp@alien8.de \
--cc=dpsmith@apertussolutions.com \
--cc=hpa@zytor.com \
--cc=iommu@lists.linux-foundation.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-integrity@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luto@amacapital.net \
--cc=mingo@redhat.com \
--cc=robin.murphy@arm.com \
--cc=tglx@linutronix.de \
--cc=trenchboot-devel@googlegroups.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).