* [ASUS EC Sensors v8 2/3] hwmon: (asus-ec-sensors) update documentation [not found] <20220124015658.687309-1-eugene.shalygin@gmail.com> @ 2022-01-24 1:56 ` Eugene Shalygin 2022-01-25 8:48 ` Oleksandr Natalenko 0 siblings, 1 reply; 2+ messages in thread From: Eugene Shalygin @ 2022-01-24 1:56 UTC (permalink / raw) To: eugene.shalygin Cc: andy.shevchenko, pauk.denis, oleksandr, Jean Delvare, Guenter Roeck, Jonathan Corbet, linux-hwmon, linux-doc, linux-kernel Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com> --- Documentation/hwmon/asus_ec_sensors.rst | 52 +++++++++++++++++++++ Documentation/hwmon/asus_wmi_ec_sensors.rst | 38 --------------- 2 files changed, 52 insertions(+), 38 deletions(-) create mode 100644 Documentation/hwmon/asus_ec_sensors.rst delete mode 100644 Documentation/hwmon/asus_wmi_ec_sensors.rst diff --git a/Documentation/hwmon/asus_ec_sensors.rst b/Documentation/hwmon/asus_ec_sensors.rst new file mode 100644 index 000000000000..b12ac7ebeb1a --- /dev/null +++ b/Documentation/hwmon/asus_ec_sensors.rst @@ -0,0 +1,52 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +Kernel driver asus_ec_sensors +================================= + +Supported boards: + * PRIME X570-PRO, + * Pro WS X570-ACE, + * ROG CROSSHAIR VIII DARK HERO, + * ROG CROSSHAIR VIII FORMULA, + * ROG CROSSHAIR VIII HERO, + * ROG CROSSHAIR VIII IMPACT, + * ROG STRIX B550-E GAMING, + * ROG STRIX B550-I GAMING, + * ROG STRIX X570-E GAMING, + * ROG STRIX X570-F GAMING, + * ROG STRIX X570-I GAMING + +Authors: + - Eugene Shalygin <eugene.shalygin@gmail.com> + +Description: +------------ +ASUS mainboards publish hardware monitoring information via Super I/O +chip and the ACPI embedded controller (EC) registers. Some of the sensors +are only available via the EC. + +The driver is aware of and reads the following sensors: + +1. Chipset (PCH) temperature +2. CPU package temperature +3. Motherboard temperature +4. Readings from the T_Sensor header +5. VRM temperature +6. CPU_Opt fan RPM +7. VRM heatsink fan RPM +8. Chipset fan RPM +9. Readings from the "Water flow meter" header (RPM) +10. Readings from the "Water In" and "Water Out" temperature headers +11. CPU current + +Sensor values are read from EC registers, and to avoid race with the board +firmware the driver acquires ACPI mutex, the one used by the WMI when its +methods access the EC. + +Module Parameters +----------------- + * mutex_path: string + The driver holds path to the ACPI mutex for each board (actually, + the path is mostly identical for them). If ASUS changes this path + in a future BIOS update, this parameter can be used to override + the stored in the driver value until it gets updated. diff --git a/Documentation/hwmon/asus_wmi_ec_sensors.rst b/Documentation/hwmon/asus_wmi_ec_sensors.rst deleted file mode 100644 index 1b287f229e86..000000000000 --- a/Documentation/hwmon/asus_wmi_ec_sensors.rst +++ /dev/null @@ -1,38 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0-or-later - -Kernel driver asus_wmi_ec_sensors -================================= - -Supported boards: - * PRIME X570-PRO, - * Pro WS X570-ACE, - * ROG CROSSHAIR VIII DARK HERO, - * ROG CROSSHAIR VIII FORMULA, - * ROG CROSSHAIR VIII HERO, - * ROG STRIX B550-E GAMING, - * ROG STRIX B550-I GAMING, - * ROG STRIX X570-E GAMING. - -Authors: - - Eugene Shalygin <eugene.shalygin@gmail.com> - -Description: ------------- -ASUS mainboards publish hardware monitoring information via Super I/O -chip and the ACPI embedded controller (EC) registers. Some of the sensors -are only available via the EC. - -ASUS WMI interface provides a method (BREC) to read data from EC registers, -which is utilized by this driver to publish those sensor readings to the -HWMON system. The driver is aware of and reads the following sensors: - -1. Chipset (PCH) temperature -2. CPU package temperature -3. Motherboard temperature -4. Readings from the T_Sensor header -5. VRM temperature -6. CPU_Opt fan RPM -7. Chipset fan RPM -8. Readings from the "Water flow meter" header (RPM) -9. Readings from the "Water In" and "Water Out" temperature headers -10. CPU current -- 2.34.1 ^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [ASUS EC Sensors v8 2/3] hwmon: (asus-ec-sensors) update documentation 2022-01-24 1:56 ` [ASUS EC Sensors v8 2/3] hwmon: (asus-ec-sensors) update documentation Eugene Shalygin @ 2022-01-25 8:48 ` Oleksandr Natalenko 0 siblings, 0 replies; 2+ messages in thread From: Oleksandr Natalenko @ 2022-01-25 8:48 UTC (permalink / raw) To: Eugene Shalygin Cc: andy.shevchenko, pauk.denis, Jean Delvare, Guenter Roeck, Jonathan Corbet, linux-hwmon, linux-doc, linux-kernel On pondělí 24. ledna 2022 2:56:44 CET Eugene Shalygin wrote: > Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com> I believe some commit message is desired here. > --- > Documentation/hwmon/asus_ec_sensors.rst | 52 +++++++++++++++++++++ > Documentation/hwmon/asus_wmi_ec_sensors.rst | 38 --------------- > 2 files changed, 52 insertions(+), 38 deletions(-) > create mode 100644 Documentation/hwmon/asus_ec_sensors.rst > delete mode 100644 Documentation/hwmon/asus_wmi_ec_sensors.rst > > diff --git a/Documentation/hwmon/asus_ec_sensors.rst b/Documentation/hwmon/asus_ec_sensors.rst > new file mode 100644 > index 000000000000..b12ac7ebeb1a > --- /dev/null > +++ b/Documentation/hwmon/asus_ec_sensors.rst > @@ -0,0 +1,52 @@ > +.. SPDX-License-Identifier: GPL-2.0-or-later > + > +Kernel driver asus_ec_sensors > +================================= > + > +Supported boards: > + * PRIME X570-PRO, > + * Pro WS X570-ACE, > + * ROG CROSSHAIR VIII DARK HERO, > + * ROG CROSSHAIR VIII FORMULA, > + * ROG CROSSHAIR VIII HERO, > + * ROG CROSSHAIR VIII IMPACT, > + * ROG STRIX B550-E GAMING, > + * ROG STRIX B550-I GAMING, > + * ROG STRIX X570-E GAMING, > + * ROG STRIX X570-F GAMING, > + * ROG STRIX X570-I GAMING > + > +Authors: > + - Eugene Shalygin <eugene.shalygin@gmail.com> > + > +Description: > +------------ > +ASUS mainboards publish hardware monitoring information via Super I/O > +chip and the ACPI embedded controller (EC) registers. Some of the sensors > +are only available via the EC. > + > +The driver is aware of and reads the following sensors: > + > +1. Chipset (PCH) temperature > +2. CPU package temperature > +3. Motherboard temperature > +4. Readings from the T_Sensor header > +5. VRM temperature > +6. CPU_Opt fan RPM > +7. VRM heatsink fan RPM > +8. Chipset fan RPM > +9. Readings from the "Water flow meter" header (RPM) > +10. Readings from the "Water In" and "Water Out" temperature headers > +11. CPU current > + > +Sensor values are read from EC registers, and to avoid race with the board > +firmware the driver acquires ACPI mutex, the one used by the WMI when its > +methods access the EC. > + > +Module Parameters > +----------------- > + * mutex_path: string > + The driver holds path to the ACPI mutex for each board (actually, > + the path is mostly identical for them). If ASUS changes this path > + in a future BIOS update, this parameter can be used to override > + the stored in the driver value until it gets updated. > diff --git a/Documentation/hwmon/asus_wmi_ec_sensors.rst b/Documentation/hwmon/asus_wmi_ec_sensors.rst > deleted file mode 100644 > index 1b287f229e86..000000000000 > --- a/Documentation/hwmon/asus_wmi_ec_sensors.rst > +++ /dev/null > @@ -1,38 +0,0 @@ > -.. SPDX-License-Identifier: GPL-2.0-or-later > - > -Kernel driver asus_wmi_ec_sensors > -================================= > - > -Supported boards: > - * PRIME X570-PRO, > - * Pro WS X570-ACE, > - * ROG CROSSHAIR VIII DARK HERO, > - * ROG CROSSHAIR VIII FORMULA, > - * ROG CROSSHAIR VIII HERO, > - * ROG STRIX B550-E GAMING, > - * ROG STRIX B550-I GAMING, > - * ROG STRIX X570-E GAMING. > - > -Authors: > - - Eugene Shalygin <eugene.shalygin@gmail.com> > - > -Description: > ------------- > -ASUS mainboards publish hardware monitoring information via Super I/O > -chip and the ACPI embedded controller (EC) registers. Some of the sensors > -are only available via the EC. > - > -ASUS WMI interface provides a method (BREC) to read data from EC registers, > -which is utilized by this driver to publish those sensor readings to the > -HWMON system. The driver is aware of and reads the following sensors: > - > -1. Chipset (PCH) temperature > -2. CPU package temperature > -3. Motherboard temperature > -4. Readings from the T_Sensor header > -5. VRM temperature > -6. CPU_Opt fan RPM > -7. Chipset fan RPM > -8. Readings from the "Water flow meter" header (RPM) > -9. Readings from the "Water In" and "Water Out" temperature headers > -10. CPU current > -- Oleksandr Natalenko (post-factum) ^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2022-01-25 8:52 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20220124015658.687309-1-eugene.shalygin@gmail.com>
2022-01-24 1:56 ` [ASUS EC Sensors v8 2/3] hwmon: (asus-ec-sensors) update documentation Eugene Shalygin
2022-01-25 8:48 ` Oleksandr Natalenko
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).