linux-doc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Nuno Sá" <noname.nuno@gmail.com>
To: Marcelo Schmitt <marcelo.schmitt@analog.com>,
	linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
	linux-doc@vger.kernel.org,  linux-kernel@vger.kernel.org
Cc: jic23@kernel.org, nuno.sa@analog.com, dlechner@baylibre.com,
	andy@kernel.org, 	Michael.Hennerich@analog.com, robh@kernel.org,
	krzk+dt@kernel.org, 	conor+dt@kernel.org, corbet@lwn.net,
	cosmin.tanislav@analog.com, 	marcelo.schmitt1@gmail.com
Subject: Re: [PATCH v1 0/3] iio: adc: Add AD4134 minimum I/O support
Date: Mon, 10 Nov 2025 14:48:46 +0000	[thread overview]
Message-ID: <5e0ea52e6a77a1d6af861ba5aaeeea5c3d514705.camel@gmail.com> (raw)
In-Reply-To: <cover.1762777931.git.marcelo.schmitt@analog.com>

On Mon, 2025-11-10 at 09:44 -0300, Marcelo Schmitt wrote:
> This patch series adds basic support for ad4134. AD4134 is a very flexible
> device that can be configured in many different ways. This series aims to
> support the simplest way of interfacing with AD4134 which is called minimum I/O
> mode in data sheet. This is essentially usual SPI with the addition of an ODR
> (Output Data Rate) GPIO which functions as conversion start signal in minimum
> I/O mode. The CS pin may be connected to a host controller CS pin or grounded.
> 
> This set provides just one feature:
> - Single-shot ADC sample read.
> 
> [PATCH 1] Device tree documentation for AD4134.
> [PATCH 2] IIO Linux driver for AD4134.
> [PATCH 3] Initial IIO documentation.
> 
> There is a driver by Cosmin on ADI Linux tree that supports AD4134 in wiring
> configurations suited for high speed data transfers. Even though the minimum I/O
> support was initialy based on that high speed transfer driver, the result ended
> up becoming entirely different. Also, because the different wiring
> configurations are likely going to use different resources and software
> interfaces, the code for AD4134 support was split into ad4134-spi.c,
> ad4134-common.h, and ad4134-common.c.

I'm familiar with the odd way this part is implemented in ADI tree :). Question is, are
you intending to support the high speed bits? I guess so, otherwise having the above split
would not make much sense.

- Nuno Sá

> 
> With best regards,
> Marcelo
> 
> Marcelo Schmitt (3):
>   dt-bindings: iio: adc: Add AD4134
>   iio: adc: Initial support for AD4134
>   Docs: iio: Add AD4134
> 
>  .../bindings/iio/adc/adi,ad4134.yaml          | 209 +++++++++++++
>  Documentation/iio/ad4134.rst                  |  58 ++++
>  Documentation/iio/index.rst                   |   1 +
>  MAINTAINERS                                   |   9 +
>  drivers/iio/adc/Kconfig                       |  15 +
>  drivers/iio/adc/Makefile                      |   2 +
>  drivers/iio/adc/ad4134-common.c               | 200 ++++++++++++
>  drivers/iio/adc/ad4134-common.h               | 132 ++++++++
>  drivers/iio/adc/ad4134-spi.c                  | 287 ++++++++++++++++++
>  9 files changed, 913 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad4134.yaml
>  create mode 100644 Documentation/iio/ad4134.rst
>  create mode 100644 drivers/iio/adc/ad4134-common.c
>  create mode 100644 drivers/iio/adc/ad4134-common.h
>  create mode 100644 drivers/iio/adc/ad4134-spi.c
> 
> 
> base-commit: c5411c8b9ed1caf53604bb1a5be3f487988efc98

  parent reply	other threads:[~2025-11-10 14:48 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-11-10 12:44 [PATCH v1 0/3] iio: adc: Add AD4134 minimum I/O support Marcelo Schmitt
2025-11-10 12:45 ` [PATCH v1 1/3] dt-bindings: iio: adc: Add AD4134 Marcelo Schmitt
2025-11-10 19:07   ` Conor Dooley
2025-11-13 21:56     ` Marcelo Schmitt
2025-11-14  1:43       ` Conor Dooley
2025-11-10 12:45 ` [PATCH v1 2/3] iio: adc: Initial support for AD4134 Marcelo Schmitt
2025-11-10 13:13   ` Andy Shevchenko
2025-11-11 21:11   ` Jonathan Cameron
2025-11-14  6:47   ` kernel test robot
2025-11-14  9:26   ` kernel test robot
2025-11-10 12:45 ` [PATCH v1 3/3] Docs: iio: Add AD4134 Marcelo Schmitt
2025-11-10 19:24   ` Randy Dunlap
2025-11-10 12:54 ` [PATCH v1 0/3] iio: adc: Add AD4134 minimum I/O support Andy Shevchenko
2025-11-10 15:43   ` Marcelo Schmitt
2025-11-10 14:48 ` Nuno Sá [this message]
2025-11-10 16:46   ` Marcelo Schmitt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5e0ea52e6a77a1d6af861ba5aaeeea5c3d514705.camel@gmail.com \
    --to=noname.nuno@gmail.com \
    --cc=Michael.Hennerich@analog.com \
    --cc=andy@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=corbet@lwn.net \
    --cc=cosmin.tanislav@analog.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dlechner@baylibre.com \
    --cc=jic23@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marcelo.schmitt1@gmail.com \
    --cc=marcelo.schmitt@analog.com \
    --cc=nuno.sa@analog.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).