From: Reinette Chatre <reinette.chatre@intel.com>
To: Tony Luck <tony.luck@intel.com>,
Fenghua Yu <fenghua.yu@intel.com>,
"Peter Newman" <peternewman@google.com>,
Jonathan Corbet <corbet@lwn.net>,
Shuah Khan <skhan@linuxfoundation.org>, <x86@kernel.org>
Cc: Shaopeng Tan <tan.shaopeng@fujitsu.com>,
James Morse <james.morse@arm.com>,
Jamie Iles <quic_jiles@quicinc.com>,
Babu Moger <babu.moger@amd.com>,
Randy Dunlap <rdunlap@infradead.org>,
<linux-kernel@vger.kernel.org>, <linux-doc@vger.kernel.org>,
<patches@lists.linux.dev>
Subject: Re: [PATCH v5 3/8] x86/resctrl: Split the rdt_domain structure
Date: Mon, 25 Sep 2023 16:25:15 -0700 [thread overview]
Message-ID: <5f1256d3-737e-a447-abbe-f541767b2c8f@intel.com> (raw)
In-Reply-To: <20230829234426.64421-4-tony.luck@intel.com>
Hi Tony,
Subject:
x86/resctrl: Split the rdt_domain and rdt_hw_domain structures
On 8/29/2023 4:44 PM, Tony Luck wrote:
> The same rdt_domain structure is used for both control an monitor
"control an monitor" -> "control and monitor"
> functions. But this results in wasted memory as some of the fields
> are only used by control functions, while most are only used for monitor
> functions.
>
> Create a new rdt_mondomain structure tailored explicitly for use in
> monitor parts of the core. Slim down the rdt_domain structure by
> removing the unused monitor fields.
>
Similar to the previous patch I think it will make the code
easier to understand if the naming is clear for both
monitoring and control structured. Why not rdt_mondomain
and rdt_ctrldomain instead?
> Similar breakout of struct rdt_hw_mondomain from struct rdt_hw_domain.
rdt_hw_mondomain and rdt_hw_ctrldomain?
>
> Signed-off-by: Tony Luck <tony.luck@intel.com>
> ---
> include/linux/resctrl.h | 46 +++++++++++++++--------
> arch/x86/kernel/cpu/resctrl/internal.h | 38 +++++++++++++------
> arch/x86/kernel/cpu/resctrl/core.c | 18 ++++-----
> arch/x86/kernel/cpu/resctrl/ctrlmondata.c | 4 +-
> arch/x86/kernel/cpu/resctrl/monitor.c | 40 ++++++++++----------
> arch/x86/kernel/cpu/resctrl/rdtgroup.c | 24 ++++++------
> 6 files changed, 101 insertions(+), 69 deletions(-)
>
> diff --git a/include/linux/resctrl.h b/include/linux/resctrl.h
> index 33856943a787..08382548571e 100644
> --- a/include/linux/resctrl.h
> +++ b/include/linux/resctrl.h
> @@ -53,7 +53,29 @@ struct resctrl_staged_config {
> };
>
> /**
> - * struct rdt_domain - group of CPUs sharing a resctrl resource
> + * struct rdt_domain - group of CPUs sharing a resctrl control resource
> + * @list: all instances of this resource
> + * @id: unique id for this instance
> + * @cpu_mask: which CPUs share this resource
> + * @plr: pseudo-locked region (if any) associated with domain
> + * @staged_config: parsed configuration to be applied
> + * @mbps_val: When mba_sc is enabled, this holds the array of user
> + * specified control values for mba_sc in MBps, indexed
> + * by closid
> + */
> +struct rdt_domain {
> + // First three fields must match struct rdt_mondomain below.
Please avoid comments within declarations. Even so, could you please
elaborate what the above means? Why do the first three fields have to
match? I understand there is common code, for example, __rdt_find_domain()
that operated on the same members of the two structs but does that
require the members be in the same position in the struct?
I understand that a comment may be required if position in the struct
is important but I cannot see that it is.
> + struct list_head list;
> + int id;
> + struct cpumask cpu_mask;
> +
> + struct pseudo_lock_region *plr;
> + struct resctrl_staged_config staged_config[CDP_NUM_TYPES];
> + u32 *mbps_val;
> +};
> +
> +/**
> + * struct rdt_mondomain - group of CPUs sharing a resctrl monitor resource
> * @list: all instances of this resource
> * @id: unique id for this instance
> * @cpu_mask: which CPUs share this resource
> @@ -64,16 +86,13 @@ struct resctrl_staged_config {
> * @cqm_limbo: worker to periodically read CQM h/w counters
> * @mbm_work_cpu: worker CPU for MBM h/w counters
> * @cqm_work_cpu: worker CPU for CQM h/w counters
> - * @plr: pseudo-locked region (if any) associated with domain
> - * @staged_config: parsed configuration to be applied
> - * @mbps_val: When mba_sc is enabled, this holds the array of user
> - * specified control values for mba_sc in MBps, indexed
> - * by closid
> */
> -struct rdt_domain {
> +struct rdt_mondomain {
> + // First three fields must match struct rdt_domain above.
Same comment.
> struct list_head list;
> int id;
> struct cpumask cpu_mask;
> +
> unsigned long *rmid_busy_llc;
> struct mbm_state *mbm_total;
> struct mbm_state *mbm_local;
> @@ -81,9 +100,6 @@ struct rdt_domain {
> struct delayed_work cqm_limbo;
> int mbm_work_cpu;
> int cqm_work_cpu;
> - struct pseudo_lock_region *plr;
> - struct resctrl_staged_config staged_config[CDP_NUM_TYPES];
> - u32 *mbps_val;
> };
>
> /**
...
> diff --git a/arch/x86/kernel/cpu/resctrl/ctrlmondata.c b/arch/x86/kernel/cpu/resctrl/ctrlmondata.c
> index 468c1815edfd..5167ac9cbe98 100644
> --- a/arch/x86/kernel/cpu/resctrl/ctrlmondata.c
> +++ b/arch/x86/kernel/cpu/resctrl/ctrlmondata.c
> @@ -521,7 +521,7 @@ int rdtgroup_schemata_show(struct kernfs_open_file *of,
> }
>
> void mon_event_read(struct rmid_read *rr, struct rdt_resource *r,
> - struct rdt_domain *d, struct rdtgroup *rdtgrp,
> + struct rdt_mondomain *d, struct rdtgroup *rdtgrp,
> int evtid, int first)
> {
> /*
> @@ -544,7 +544,7 @@ int rdtgroup_mondata_show(struct seq_file *m, void *arg)
> struct rdtgroup *rdtgrp;
> struct rdt_resource *r;
> union mon_data_bits md;
> - struct rdt_domain *d;
> + struct rdt_mondomain *d;
Reverse fir order.
> struct rmid_read rr;
> int ret = 0;
>
> diff --git a/arch/x86/kernel/cpu/resctrl/monitor.c b/arch/x86/kernel/cpu/resctrl/monitor.c
> index 66beca785535..42262d59ef9b 100644
> --- a/arch/x86/kernel/cpu/resctrl/monitor.c
> +++ b/arch/x86/kernel/cpu/resctrl/monitor.c
> @@ -170,7 +170,7 @@ static int __rmid_read(u32 rmid, enum resctrl_event_id eventid, u64 *val)
> return 0;
> }
>
> -static struct arch_mbm_state *get_arch_mbm_state(struct rdt_hw_domain *hw_dom,
> +static struct arch_mbm_state *get_arch_mbm_state(struct rdt_hw_mondomain *hw_dom,
> u32 rmid,
> enum resctrl_event_id eventid)
> {
> @@ -189,10 +189,10 @@ static struct arch_mbm_state *get_arch_mbm_state(struct rdt_hw_domain *hw_dom,
> return NULL;
> }
>
> -void resctrl_arch_reset_rmid(struct rdt_resource *r, struct rdt_domain *d,
> +void resctrl_arch_reset_rmid(struct rdt_resource *r, struct rdt_mondomain *d,
> u32 rmid, enum resctrl_event_id eventid)
> {
> - struct rdt_hw_domain *hw_dom = resctrl_to_arch_dom(d);
> + struct rdt_hw_mondomain *hw_dom = resctrl_to_arch_mondom(d);
> struct arch_mbm_state *am;
>
> am = get_arch_mbm_state(hw_dom, rmid, eventid);
> @@ -208,9 +208,9 @@ void resctrl_arch_reset_rmid(struct rdt_resource *r, struct rdt_domain *d,
> * Assumes that hardware counters are also reset and thus that there is
> * no need to record initial non-zero counts.
> */
> -void resctrl_arch_reset_rmid_all(struct rdt_resource *r, struct rdt_domain *d)
> +void resctrl_arch_reset_rmid_all(struct rdt_resource *r, struct rdt_mondomain *d)
> {
> - struct rdt_hw_domain *hw_dom = resctrl_to_arch_dom(d);
> + struct rdt_hw_mondomain *hw_dom = resctrl_to_arch_mondom(d);
>
> if (is_mbm_total_enabled())
> memset(hw_dom->arch_mbm_total, 0,
> @@ -229,11 +229,11 @@ static u64 mbm_overflow_count(u64 prev_msr, u64 cur_msr, unsigned int width)
> return chunks >> shift;
> }
>
> -int resctrl_arch_rmid_read(struct rdt_resource *r, struct rdt_domain *d,
> +int resctrl_arch_rmid_read(struct rdt_resource *r, struct rdt_mondomain *d,
> u32 rmid, enum resctrl_event_id eventid, u64 *val)
> {
> struct rdt_hw_resource *hw_res = resctrl_to_arch_res(r);
> - struct rdt_hw_domain *hw_dom = resctrl_to_arch_dom(d);
> + struct rdt_hw_mondomain *hw_mondom = resctrl_to_arch_mondom(d);
Reverse fir.
> struct arch_mbm_state *am;
> u64 msr_val, chunks;
> int ret;
> @@ -245,7 +245,7 @@ int resctrl_arch_rmid_read(struct rdt_resource *r, struct rdt_domain *d,
> if (ret)
> return ret;
>
> - am = get_arch_mbm_state(hw_dom, rmid, eventid);
> + am = get_arch_mbm_state(hw_mondom, rmid, eventid);
> if (am) {
> am->chunks += mbm_overflow_count(am->prev_msr, msr_val,
> hw_res->mbm_width);
> @@ -266,7 +266,7 @@ int resctrl_arch_rmid_read(struct rdt_resource *r, struct rdt_domain *d,
> * decrement the count. If the busy count gets to zero on an RMID, we
> * free the RMID
> */
> -void __check_limbo(struct rdt_domain *d, bool force_free)
> +void __check_limbo(struct rdt_mondomain *d, bool force_free)
> {
> struct rdt_resource *r = &rdt_resources_all[RDT_RESOURCE_L3].r_resctrl;
> struct rmid_entry *entry;
> @@ -305,7 +305,7 @@ void __check_limbo(struct rdt_domain *d, bool force_free)
> }
> }
>
> -bool has_busy_rmid(struct rdt_resource *r, struct rdt_domain *d)
> +bool has_busy_rmid(struct rdt_resource *r, struct rdt_mondomain *d)
> {
> return find_first_bit(d->rmid_busy_llc, r->num_rmid) != r->num_rmid;
> }
> @@ -334,7 +334,7 @@ int alloc_rmid(void)
> static void add_rmid_to_limbo(struct rmid_entry *entry)
> {
> struct rdt_resource *r = &rdt_resources_all[RDT_RESOURCE_L3].r_resctrl;
> - struct rdt_domain *d;
> + struct rdt_mondomain *d;
> int cpu, err;
> u64 val = 0;
>
> @@ -383,7 +383,7 @@ void free_rmid(u32 rmid)
> list_add_tail(&entry->list, &rmid_free_lru);
> }
>
> -static struct mbm_state *get_mbm_state(struct rdt_domain *d, u32 rmid,
> +static struct mbm_state *get_mbm_state(struct rdt_mondomain *d, u32 rmid,
> enum resctrl_event_id evtid)
> {
> switch (evtid) {
> @@ -516,7 +516,7 @@ void mon_event_count(void *info)
> * throttle MSRs already have low percentage values. To avoid
> * unnecessarily restricting such rdtgroups, we also increase the bandwidth.
> */
> -static void update_mba_bw(struct rdtgroup *rgrp, struct rdt_domain *dom_mbm)
> +static void update_mba_bw(struct rdtgroup *rgrp, struct rdt_mondomain *dom_mbm)
> {
> u32 closid, rmid, cur_msr_val, new_msr_val;
> struct mbm_state *pmbm_data, *cmbm_data;
> @@ -600,7 +600,7 @@ static void update_mba_bw(struct rdtgroup *rgrp, struct rdt_domain *dom_mbm)
> }
> }
>
> -static void mbm_update(struct rdt_resource *r, struct rdt_domain *d, int rmid)
> +static void mbm_update(struct rdt_resource *r, struct rdt_mondomain *d, int rmid)
> {
> struct rmid_read rr;
>
> @@ -641,12 +641,12 @@ void cqm_handle_limbo(struct work_struct *work)
> unsigned long delay = msecs_to_jiffies(CQM_LIMBOCHECK_INTERVAL);
> int cpu = smp_processor_id();
> struct rdt_resource *r;
> - struct rdt_domain *d;
> + struct rdt_mondomain *d;
Reverse fir (Please check all code).
Reinette
next prev parent reply other threads:[~2023-09-25 23:25 UTC|newest]
Thread overview: 331+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-13 16:31 [PATCH v3 0/8] x86/resctrl: Add support for Sub-NUMA cluster (SNC) systems Tony Luck
2023-07-13 16:32 ` [PATCH v3 1/8] x86/resctrl: Refactor in preparation for node-scoped resources Tony Luck
2023-07-18 20:36 ` Reinette Chatre
2023-07-13 16:32 ` [PATCH v3 2/8] x86/resctrl: Remove hard code of RDT_RESOURCE_L3 in monitor.c Tony Luck
2023-07-18 20:37 ` Reinette Chatre
2023-07-13 16:32 ` [PATCH v3 3/8] x86/resctrl: Add a new node-scoped resource to rdt_resources_all[] Tony Luck
2023-07-18 20:40 ` Reinette Chatre
2023-07-18 22:57 ` Tony Luck
2023-07-18 23:45 ` Reinette Chatre
2023-07-19 0:11 ` Luck, Tony
2023-07-20 17:27 ` Reinette Chatre
2023-07-20 0:20 ` Tony Luck
2023-07-20 17:27 ` Reinette Chatre
2023-07-20 21:56 ` Luck, Tony
2023-07-22 19:18 ` Tony Luck
2023-07-13 16:32 ` [PATCH v3 4/8] x86/resctrl: Add code to setup monitoring at L3 or NODE scope Tony Luck
2023-07-18 20:42 ` Reinette Chatre
2023-07-13 16:32 ` [PATCH v3 5/8] x86/resctrl: Add package scoped resource Tony Luck
2023-07-18 20:43 ` Reinette Chatre
2023-07-18 23:05 ` Tony Luck
2023-07-13 16:32 ` [PATCH v3 6/8] x86/resctrl: Update documentation with Sub-NUMA cluster changes Tony Luck
2023-07-13 16:32 ` [PATCH v3 7/8] x86/resctrl: Determine if Sub-NUMA Cluster is enabled and initialize Tony Luck
2023-07-18 20:45 ` Reinette Chatre
2023-07-13 16:32 ` [PATCH v3 8/8] selftests/resctrl: Adjust effective L3 cache size when SNC enabled Tony Luck
2023-07-19 2:43 ` [PATCH v3 0/8] x86/resctrl: Add support for Sub-NUMA cluster (SNC) systems Shaopeng Tan (Fujitsu)
2023-07-22 20:21 ` Tony Luck
2023-07-22 19:07 ` [PATCH v4 0/7] " Tony Luck
2023-07-22 19:07 ` [PATCH v4 1/7] x86/resctrl: Create separate domains for control and monitoring Tony Luck
2023-08-11 17:29 ` Reinette Chatre
2023-08-25 17:05 ` Tony Luck
2023-08-28 17:05 ` Reinette Chatre
2023-08-28 18:46 ` Tony Luck
2023-08-28 19:56 ` Reinette Chatre
2023-08-28 20:59 ` Tony Luck
2023-08-28 21:20 ` Reinette Chatre
2023-08-28 22:12 ` Tony Luck
2023-08-29 0:31 ` Tony Luck
2023-07-22 19:07 ` [PATCH v4 2/7] x86/resctrl: Split the rdt_domain structures Tony Luck
2023-07-22 19:07 ` [PATCH v4 3/7] x86/resctrl: Change monitor code to use rdt_mondomain Tony Luck
2023-08-11 17:30 ` Reinette Chatre
2023-08-25 17:13 ` Tony Luck
2023-07-22 19:07 ` [PATCH v4 4/7] x86/resctrl: Delete unused fields from struct rdt_domain Tony Luck
2023-08-11 17:30 ` Reinette Chatre
2023-08-25 17:13 ` Tony Luck
2023-07-22 19:07 ` [PATCH v4 5/7] x86/resctrl: Determine if Sub-NUMA Cluster is enabled and initialize Tony Luck
2023-08-11 17:32 ` Reinette Chatre
2023-08-25 17:49 ` Tony Luck
2023-08-28 17:05 ` Reinette Chatre
2023-08-28 19:01 ` Tony Luck
2023-07-22 19:07 ` [PATCH v4 6/7] x86/resctrl: Update documentation with Sub-NUMA cluster changes Tony Luck
2023-08-11 17:33 ` Reinette Chatre
2023-08-25 17:50 ` Tony Luck
2023-07-22 19:07 ` [PATCH v4 7/7] selftests/resctrl: Adjust effective L3 cache size when SNC enabled Tony Luck
2023-08-11 17:33 ` Reinette Chatre
2023-08-25 17:56 ` Tony Luck
2023-08-28 17:06 ` Reinette Chatre
2023-08-28 19:06 ` Tony Luck
2023-07-26 3:10 ` [PATCH v4 0/7] Add support for Sub-NUMA cluster (SNC) systems Drew Fustini
2023-07-26 14:10 ` Tony Luck
2023-08-11 17:27 ` Reinette Chatre
2023-08-29 23:44 ` [PATCH v5 0/8] " Tony Luck
2023-08-29 23:44 ` [PATCH v5 1/8] x86/resctrl: Prepare for new domain scope Tony Luck
2023-08-30 8:53 ` Maciej Wieczór-Retman
2023-08-30 14:11 ` Luck, Tony
2023-08-31 13:02 ` Maciej Wieczór-Retman
2023-08-31 17:26 ` Luck, Tony
2023-09-25 23:22 ` Reinette Chatre
2023-09-26 0:56 ` Tony Luck
2023-09-26 15:19 ` Reinette Chatre
2023-09-26 16:36 ` Moger, Babu
2023-09-26 17:18 ` Luck, Tony
2023-08-29 23:44 ` [PATCH v5 2/8] x86/resctrl: Prepare for different scope for control/monitor operations Tony Luck
2023-09-25 23:24 ` Reinette Chatre
2023-09-28 17:21 ` Tony Luck
2023-09-26 16:54 ` Moger, Babu
2023-09-26 17:45 ` Luck, Tony
2023-08-29 23:44 ` [PATCH v5 3/8] x86/resctrl: Split the rdt_domain structure Tony Luck
2023-09-25 23:25 ` Reinette Chatre [this message]
2023-09-26 18:46 ` Tony Luck
2023-09-26 22:00 ` Reinette Chatre
2023-09-26 22:14 ` Luck, Tony
2023-09-26 23:06 ` Reinette Chatre
2023-09-27 0:00 ` Luck, Tony
2023-09-27 15:22 ` Reinette Chatre
2023-09-28 17:33 ` Tony Luck
2023-09-28 18:42 ` Reinette Chatre
2023-08-29 23:44 ` [PATCH v5 4/8] x86/resctrl: Add node-scope to the options for feature scope Tony Luck
2023-09-25 23:25 ` Reinette Chatre
2023-09-28 17:42 ` Tony Luck
2023-09-28 18:44 ` Reinette Chatre
2023-08-29 23:44 ` [PATCH v5 5/8] x86/resctrl: Introduce snc_nodes_per_l3_cache Tony Luck
2023-09-25 23:27 ` Reinette Chatre
2023-09-28 17:48 ` Tony Luck
2023-08-29 23:44 ` [PATCH v5 6/8] x86/resctrl: Sub NUMA Cluster detection and enable Tony Luck
2023-09-25 23:29 ` Reinette Chatre
2023-09-28 18:12 ` Tony Luck
2023-09-28 18:44 ` Reinette Chatre
2023-09-26 19:16 ` Moger, Babu
2023-09-26 19:40 ` Luck, Tony
2023-09-26 19:48 ` Moger, Babu
2023-09-26 20:02 ` Luck, Tony
2023-09-26 20:18 ` Moger, Babu
2023-09-26 21:03 ` Reinette Chatre
2023-08-29 23:44 ` [PATCH v5 7/8] x86/resctrl: Update documentation with Sub-NUMA cluster changes Tony Luck
2023-09-25 23:30 ` Reinette Chatre
2023-09-28 18:15 ` Tony Luck
2023-09-26 19:00 ` Moger, Babu
2023-09-26 19:11 ` Luck, Tony
2023-09-26 19:26 ` Moger, Babu
2023-09-26 19:43 ` Luck, Tony
2023-09-26 19:52 ` Moger, Babu
2023-08-29 23:44 ` [PATCH v5 8/8] selftests/resctrl: Adjust effective L3 cache size when SNC enabled Tony Luck
2023-08-30 13:08 ` Maciej Wieczór-Retman
2023-08-30 15:43 ` Luck, Tony
2023-08-31 6:51 ` Maciej Wieczór-Retman
2023-08-31 17:04 ` Luck, Tony
2023-09-07 5:21 ` Shaopeng Tan (Fujitsu)
2023-09-07 16:19 ` Luck, Tony
2023-09-19 6:50 ` Maciej Wieczór-Retman
2023-09-19 14:36 ` Luck, Tony
2023-09-20 6:06 ` Maciej Wieczór-Retman
2023-09-20 15:00 ` Luck, Tony
2023-09-11 20:23 ` [PATCH v5 0/8] Add support for Sub-NUMA cluster (SNC) systems Reinette Chatre
2023-09-12 16:01 ` Tony Luck
2023-09-12 17:13 ` Reinette Chatre
2023-09-12 17:45 ` Tony Luck
2023-09-12 18:31 ` Reinette Chatre
2023-09-28 19:13 ` [PATCH v6 " Tony Luck
2023-09-28 19:13 ` [PATCH v6 1/8] x86/resctrl: Prepare for new domain scope Tony Luck
2023-09-29 12:09 ` Peter Newman
2023-09-29 18:38 ` Tony Luck
2023-09-28 19:13 ` [PATCH v6 2/8] x86/resctrl: Prepare to split rdt_domain structure Tony Luck
2023-09-29 12:19 ` Peter Newman
2023-09-28 19:13 ` [PATCH v6 3/8] x86/resctrl: Prepare for different scope for control/monitor operations Tony Luck
2023-09-29 13:10 ` Peter Newman
2023-09-29 19:15 ` Tony Luck
2023-09-28 19:13 ` [PATCH v6 4/8] x86/resctrl: Split the rdt_domain and rdt_hw_domain structures Tony Luck
2023-09-29 13:44 ` Peter Newman
2023-09-29 20:06 ` Tony Luck
2023-09-28 19:13 ` [PATCH v6 5/8] x86/resctrl: Add node-scope to the options for feature scope Tony Luck
2023-09-29 14:21 ` Peter Newman
2023-09-28 19:13 ` [PATCH v6 6/8] x86/resctrl: Introduce snc_nodes_per_l3_cache Tony Luck
2023-09-29 14:21 ` Peter Newman
2023-09-29 20:18 ` Tony Luck
2023-09-28 19:13 ` [PATCH v6 7/8] x86/resctrl: Sub NUMA Cluster detection and enable Tony Luck
2023-09-29 14:32 ` Peter Newman
2023-09-28 19:13 ` [PATCH v6 8/8] x86/resctrl: Update documentation with Sub-NUMA cluster changes Tony Luck
2023-09-29 14:54 ` Peter Newman
2023-09-29 20:51 ` Tony Luck
2023-09-29 14:33 ` [PATCH v6 0/8] Add support for Sub-NUMA cluster (SNC) systems Peter Newman
2023-09-29 21:06 ` Tony Luck
2023-10-03 16:07 ` [PATCH v7 " Tony Luck
2023-10-03 16:07 ` [PATCH v7 1/8] x86/resctrl: Prepare for new domain scope Tony Luck
2023-10-03 16:07 ` [PATCH v7 2/8] x86/resctrl: Prepare to split rdt_domain structure Tony Luck
2023-10-03 16:07 ` [PATCH v7 3/8] x86/resctrl: Prepare for different scope for control/monitor operations Tony Luck
2023-10-03 16:07 ` [PATCH v7 4/8] x86/resctrl: Split the rdt_domain and rdt_hw_domain structures Tony Luck
2023-10-03 16:46 ` Luck, Tony
2023-10-03 16:07 ` [PATCH v7 5/8] x86/resctrl: Add node-scope to the options for feature scope Tony Luck
2023-10-03 16:07 ` [PATCH v7 6/8] x86/resctrl: Introduce snc_nodes_per_l3_cache Tony Luck
2023-10-03 16:07 ` [PATCH v7 7/8] x86/resctrl: Sub NUMA Cluster detection and enable Tony Luck
2023-10-03 16:07 ` [PATCH v7 8/8] x86/resctrl: Update documentation with Sub-NUMA cluster changes Tony Luck
2023-10-03 16:16 ` [PATCH v7 0/8] Add support for Sub-NUMA cluster (SNC) systems Luck, Tony
2023-10-03 16:34 ` Reinette Chatre
2023-10-03 21:30 ` [PATCH v8 " Tony Luck
2023-10-03 21:30 ` [PATCH v8 1/8] x86/resctrl: Prepare for new domain scope Tony Luck
2023-10-05 14:27 ` Peter Newman
2023-10-03 21:30 ` [PATCH v8 2/8] x86/resctrl: Prepare to split rdt_domain structure Tony Luck
2023-10-03 21:30 ` [PATCH v8 3/8] x86/resctrl: Prepare for different scope for control/monitor operations Tony Luck
2023-10-05 14:34 ` Peter Newman
2023-10-03 21:30 ` [PATCH v8 4/8] x86/resctrl: Split the rdt_domain and rdt_hw_domain structures Tony Luck
2023-10-03 21:30 ` [PATCH v8 5/8] x86/resctrl: Add node-scope to the options for feature scope Tony Luck
2023-10-03 21:30 ` [PATCH v8 6/8] x86/resctrl: Introduce snc_nodes_per_l3_cache Tony Luck
2023-10-03 21:30 ` [PATCH v8 7/8] x86/resctrl: Sub NUMA Cluster detection and enable Tony Luck
2023-10-03 21:30 ` [PATCH v8 8/8] x86/resctrl: Update documentation with Sub-NUMA cluster changes Tony Luck
2023-10-05 13:54 ` Peter Newman
2023-10-03 21:44 ` [PATCH v8 0/8] Add support for Sub-NUMA cluster (SNC) systems Reinette Chatre
2023-10-05 8:10 ` Shaopeng Tan (Fujitsu)
2023-10-05 15:08 ` Luck, Tony
2023-10-06 20:27 ` Reinette Chatre
2023-10-20 21:30 ` [PATCH v9 " Tony Luck
2023-10-20 21:30 ` [PATCH v9 1/8] x86/resctrl: Prepare for new domain scope Tony Luck
2023-10-30 21:18 ` Reinette Chatre
2023-10-20 21:30 ` [PATCH v9 2/8] x86/resctrl: Prepare to split rdt_domain structure Tony Luck
2023-10-30 21:19 ` Reinette Chatre
2023-10-20 21:30 ` [PATCH v9 3/8] x86/resctrl: Prepare for different scope for control/monitor operations Tony Luck
2023-10-30 21:21 ` Reinette Chatre
2023-10-20 21:30 ` [PATCH v9 4/8] x86/resctrl: Split the rdt_domain and rdt_hw_domain structures Tony Luck
2023-10-30 21:21 ` Reinette Chatre
2023-10-20 21:30 ` [PATCH v9 5/8] x86/resctrl: Add node-scope to the options for feature scope Tony Luck
2023-10-20 21:30 ` [PATCH v9 6/8] x86/resctrl: Introduce snc_nodes_per_l3_cache Tony Luck
2023-10-30 21:22 ` Reinette Chatre
2023-10-20 21:30 ` [PATCH v9 7/8] x86/resctrl: Sub NUMA Cluster detection and enable Tony Luck
2023-10-30 21:23 ` Reinette Chatre
2023-10-20 21:31 ` [PATCH v9 8/8] x86/resctrl: Update documentation with Sub-NUMA cluster changes Tony Luck
2023-10-24 5:41 ` [PATCH v9 0/8] Add support for Sub-NUMA cluster (SNC) systems Shaopeng Tan (Fujitsu)
2023-10-24 15:29 ` Luck, Tony
2023-10-31 21:17 ` [PATCH v10 " Tony Luck
2023-10-31 21:17 ` [PATCH v10 1/8] x86/resctrl: Prepare for new domain scope Tony Luck
2023-11-07 0:31 ` Reinette Chatre
2023-10-31 21:17 ` [PATCH v10 2/8] x86/resctrl: Prepare to split rdt_domain structure Tony Luck
2023-10-31 21:17 ` [PATCH v10 3/8] x86/resctrl: Prepare for different scope for control/monitor operations Tony Luck
2023-11-01 19:53 ` Luck, Tony
2023-11-07 0:32 ` Reinette Chatre
2023-10-31 21:17 ` [PATCH v10 4/8] x86/resctrl: Split the rdt_domain and rdt_hw_domain structures Tony Luck
2023-11-07 0:32 ` Reinette Chatre
2023-11-08 19:19 ` Tony Luck
2023-11-08 19:43 ` Reinette Chatre
2023-11-08 20:10 ` Luck, Tony
2023-10-31 21:17 ` [PATCH v10 5/8] x86/resctrl: Add node-scope to the options for feature scope Tony Luck
2023-10-31 21:17 ` [PATCH v10 6/8] x86/resctrl: Introduce snc_nodes_per_l3_cache Tony Luck
2023-10-31 21:17 ` [PATCH v10 7/8] x86/resctrl: Sub NUMA Cluster detection and enable Tony Luck
2023-11-07 0:33 ` Reinette Chatre
2023-10-31 21:17 ` [PATCH v10 8/8] x86/resctrl: Update documentation with Sub-NUMA cluster changes Tony Luck
2023-11-09 23:09 ` [PATCH v11 0/8] Add support for Sub-NUMA cluster (SNC) systems Tony Luck
2023-11-09 23:09 ` [PATCH v11 1/8] x86/resctrl: Prepare for new domain scope Tony Luck
2023-11-13 19:36 ` Moger, Babu
2023-11-13 20:49 ` Luck, Tony
2023-11-20 22:16 ` Reinette Chatre
2023-11-09 23:09 ` [PATCH v11 2/8] x86/resctrl: Prepare to split rdt_domain structure Tony Luck
2023-11-13 18:08 ` Moger, Babu
2023-11-13 18:52 ` Tony Luck
2023-11-13 19:32 ` Moger, Babu
2023-11-20 22:18 ` Reinette Chatre
2023-11-09 23:09 ` [PATCH v11 3/8] x86/resctrl: Prepare for different scope for control/monitor operations Tony Luck
2023-11-20 22:19 ` Reinette Chatre
2023-11-09 23:09 ` [PATCH v11 4/8] x86/resctrl: Split the rdt_domain and rdt_hw_domain structures Tony Luck
2023-11-20 22:19 ` Reinette Chatre
2023-11-09 23:09 ` [PATCH v11 5/8] x86/resctrl: Add node-scope to the options for feature scope Tony Luck
2023-11-20 22:22 ` Reinette Chatre
2023-11-09 23:09 ` [PATCH v11 6/8] x86/resctrl: Introduce snc_nodes_per_l3_cache Tony Luck
2023-11-20 22:23 ` Reinette Chatre
2023-11-09 23:09 ` [PATCH v11 7/8] x86/resctrl: Sub NUMA Cluster detection and enable Tony Luck
2023-11-20 22:24 ` Reinette Chatre
2023-11-09 23:09 ` [PATCH v11 8/8] x86/resctrl: Update documentation with Sub-NUMA cluster changes Tony Luck
2023-11-09 23:14 ` Randy Dunlap
2023-11-20 22:25 ` Reinette Chatre
2023-11-13 4:46 ` [PATCH v11 0/8] Add support for Sub-NUMA cluster (SNC) systems Shaopeng Tan (Fujitsu)
2023-11-13 17:33 ` Luck, Tony
2023-11-30 0:34 ` [PATCH v12 " Tony Luck
2023-11-30 0:34 ` [PATCH v12 1/8] x86/resctrl: Prepare for new domain scope Tony Luck
2023-11-30 0:34 ` [PATCH v12 2/8] x86/resctrl: Prepare to split rdt_domain structure Tony Luck
2023-11-30 0:34 ` [PATCH v12 3/8] x86/resctrl: Prepare for different scope for control/monitor operations Tony Luck
2023-11-30 21:51 ` Reinette Chatre
2023-11-30 0:34 ` [PATCH v12 4/8] x86/resctrl: Split the rdt_domain and rdt_hw_domain structures Tony Luck
2023-11-30 0:34 ` [PATCH v12 5/8] x86/resctrl: Add node-scope to the options for feature scope Tony Luck
2023-11-30 0:34 ` [PATCH v12 6/8] x86/resctrl: Introduce snc_nodes_per_l3_cache Tony Luck
2023-11-30 0:34 ` [PATCH v12 7/8] x86/resctrl: Sub NUMA Cluster detection and enable Tony Luck
2023-11-30 18:02 ` Fam Zheng
2023-11-30 20:57 ` Tony Luck
2023-11-30 21:47 ` Reinette Chatre
2023-11-30 22:43 ` Tony Luck
2023-11-30 23:40 ` Reinette Chatre
2023-12-01 0:37 ` Tony Luck
2023-12-01 2:08 ` Reinette Chatre
2023-11-30 0:34 ` [PATCH v12 8/8] x86/resctrl: Update documentation with Sub-NUMA cluster changes Tony Luck
2023-12-04 16:55 ` Moger, Babu
2023-12-04 17:51 ` Luck, Tony
2023-12-04 18:53 ` [PATCH v13 0/8] Add support for Sub-NUMA cluster (SNC) systems Tony Luck
2023-12-04 18:53 ` [PATCH v13 1/8] x86/resctrl: Prepare for new domain scope Tony Luck
2023-12-04 23:03 ` Moger, Babu
2023-12-04 18:53 ` [PATCH v13 2/8] x86/resctrl: Prepare to split rdt_domain structure Tony Luck
2023-12-04 23:03 ` Moger, Babu
2023-12-04 18:53 ` [PATCH v13 3/8] x86/resctrl: Prepare for different scope for control/monitor operations Tony Luck
2023-12-04 23:03 ` Moger, Babu
2023-12-04 18:53 ` [PATCH v13 4/8] x86/resctrl: Split the rdt_domain and rdt_hw_domain structures Tony Luck
2023-12-04 23:03 ` Moger, Babu
2023-12-04 18:53 ` [PATCH v13 5/8] x86/resctrl: Add node-scope to the options for feature scope Tony Luck
2023-12-04 23:04 ` Moger, Babu
2023-12-04 18:53 ` [PATCH v13 6/8] x86/resctrl: Introduce snc_nodes_per_l3_cache Tony Luck
2023-12-04 23:04 ` Moger, Babu
2023-12-04 18:53 ` [PATCH v13 7/8] x86/resctrl: Sub NUMA Cluster detection and enable Tony Luck
2023-12-04 23:04 ` Moger, Babu
2023-12-04 18:53 ` [PATCH v13 8/8] x86/resctrl: Update documentation with Sub-NUMA cluster changes Tony Luck
2023-12-04 23:04 ` Moger, Babu
2023-12-04 21:20 ` [PATCH v13 0/8] Add support for Sub-NUMA cluster (SNC) systems Moger, Babu
2023-12-04 21:33 ` Luck, Tony
2023-12-04 23:25 ` Tony Luck
2024-01-26 22:38 ` [PATCH v14 " Tony Luck
2024-01-26 22:38 ` [PATCH v14 1/8] x86/resctrl: Prepare for new domain scope Tony Luck
2024-01-26 22:38 ` [PATCH v14 2/8] x86/resctrl: Prepare to split rdt_domain structure Tony Luck
2024-01-26 22:38 ` [PATCH v14 3/8] x86/resctrl: Prepare for different scope for control/monitor operations Tony Luck
2024-01-26 22:38 ` [PATCH v14 4/8] x86/resctrl: Split the rdt_domain and rdt_hw_domain structures Tony Luck
2024-01-26 22:38 ` [PATCH v14 5/8] x86/resctrl: Add node-scope to the options for feature scope Tony Luck
2024-01-26 22:38 ` [PATCH v14 6/8] x86/resctrl: Introduce snc_nodes_per_l3_cache Tony Luck
2024-01-26 22:38 ` [PATCH v14 7/8] x86/resctrl: Sub NUMA Cluster detection and enable Tony Luck
2024-01-26 22:38 ` [PATCH v14 8/8] x86/resctrl: Update documentation with Sub-NUMA cluster changes Tony Luck
2024-01-30 1:05 ` [PATCH v14 0/8] Add support for Sub-NUMA cluster (SNC) systems Tony Luck
2024-01-30 22:20 ` [PATCH v15-RFC " Tony Luck
2024-01-30 22:20 ` [PATCH v15-RFC 1/8] x86/resctrl: Split the RDT_RESOURCE_L3 resource Tony Luck
2024-02-09 15:28 ` Moger, Babu
2024-02-09 18:44 ` Tony Luck
2024-02-09 19:40 ` Moger, Babu
2024-01-30 22:20 ` [PATCH v15-RFC 2/8] x86/resctrl: Move all monitoring functions to RDT_RESOURCE_L3_MON Tony Luck
2024-02-09 15:28 ` Moger, Babu
2024-02-09 18:51 ` Tony Luck
2024-01-30 22:20 ` [PATCH v15-RFC 3/8] x86/resctrl: Prepare for non-cache-scoped resources Tony Luck
2024-02-09 15:28 ` Moger, Babu
2024-02-09 18:57 ` Tony Luck
2024-02-09 19:44 ` Moger, Babu
2024-01-30 22:20 ` [PATCH v15-RFC 4/8] x86/resctrl: Add helper function to look up domain_id from scope Tony Luck
2024-02-09 15:28 ` Moger, Babu
2024-02-09 19:06 ` Tony Luck
2024-01-30 22:20 ` [PATCH v15-RFC 5/8] x86/resctrl: Add "NODE" as an option for resource scope Tony Luck
2024-02-09 15:29 ` Moger, Babu
2024-02-09 19:23 ` Tony Luck
2024-02-12 17:16 ` Moger, Babu
2024-01-30 22:20 ` [PATCH v15-RFC 6/8] x86/resctrl: Introduce snc_nodes_per_l3_cache Tony Luck
2024-02-09 15:29 ` Moger, Babu
2024-02-09 19:35 ` Tony Luck
2024-02-12 17:22 ` Moger, Babu
2024-01-30 22:20 ` [PATCH v15-RFC 7/8] x86/resctrl: Sub NUMA Cluster detection and enable Tony Luck
2024-01-30 22:20 ` [PATCH v15-RFC 8/8] x86/resctrl: Update documentation with Sub-NUMA cluster changes Tony Luck
2024-02-01 18:46 ` [PATCH v15-RFC 0/8] Add support for Sub-NUMA cluster (SNC) systems Reinette Chatre
2024-02-08 4:17 ` Drew Fustini
2024-02-08 19:26 ` Luck, Tony
2024-02-09 15:27 ` Moger, Babu
2024-02-09 18:31 ` Tony Luck
2024-02-09 19:38 ` Moger, Babu
2024-02-09 21:26 ` Reinette Chatre
2024-02-09 21:36 ` Luck, Tony
2024-02-09 22:16 ` Reinette Chatre
2024-02-09 23:44 ` Luck, Tony
2024-02-10 0:28 ` Reinette Chatre
2024-02-12 16:52 ` Luck, Tony
2024-02-12 19:44 ` Reinette Chatre
2024-02-12 19:57 ` Luck, Tony
2024-02-12 21:43 ` Reinette Chatre
2024-02-12 22:05 ` Tony Luck
2024-02-13 18:11 ` James Morse
2024-02-13 19:02 ` Luck, Tony
2024-02-12 20:46 ` Moger, Babu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5f1256d3-737e-a447-abbe-f541767b2c8f@intel.com \
--to=reinette.chatre@intel.com \
--cc=babu.moger@amd.com \
--cc=corbet@lwn.net \
--cc=fenghua.yu@intel.com \
--cc=james.morse@arm.com \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@lists.linux.dev \
--cc=peternewman@google.com \
--cc=quic_jiles@quicinc.com \
--cc=rdunlap@infradead.org \
--cc=skhan@linuxfoundation.org \
--cc=tan.shaopeng@fujitsu.com \
--cc=tony.luck@intel.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).