From: Vadim Fedorenko <vadim.fedorenko@linux.dev>
To: Jiri Pirko <jiri@resnulli.us>,
Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Cc: kuba@kernel.org, vadfed@meta.com, jonathan.lemon@gmail.com,
pabeni@redhat.com, corbet@lwn.net, davem@davemloft.net,
edumazet@google.com, vadfed@fb.com, jesse.brandeburg@intel.com,
anthony.l.nguyen@intel.com, saeedm@nvidia.com, leon@kernel.org,
richardcochran@gmail.com, sj@kernel.org, javierm@redhat.com,
ricardo.canuelo@collabora.com, mst@redhat.com,
tzimmermann@suse.de, michal.michalik@intel.com,
gregkh@linuxfoundation.org, jacek.lawrynowicz@linux.intel.com,
airlied@redhat.com, ogabbay@kernel.org, arnd@arndb.de,
nipun.gupta@amd.com, axboe@kernel.dk, linux@zary.sk,
masahiroy@kernel.org, benjamin.tissoires@redhat.com,
geert+renesas@glider.be, milena.olech@intel.com,
kuniyu@amazon.com, liuhangbin@gmail.com, hkallweit1@gmail.com,
andy.ren@getcruise.com, razor@blackwall.org, idosch@nvidia.com,
lucien.xin@gmail.com, nicolas.dichtel@6wind.com, phil@nwl.cc,
claudiajkang@gmail.com, linux-doc@vger.kernel.org,
linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
intel-wired-lan@lists.osuosl.org, linux-rdma@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, poros@redhat.com,
mschmidt@redhat.com, linux-clk@vger.kernel.org
Subject: Re: [RFC PATCH v8 05/10] dpll: api header: Add DPLL framework base functions
Date: Mon, 12 Jun 2023 16:00:40 +0100 [thread overview]
Message-ID: <610b2e82-7b84-4ccd-a6da-1f018c7f6568@linux.dev> (raw)
In-Reply-To: <ZIQlhyXJAtcp1Fjr@nanopsycho>
On 10/06/2023 08:25, Jiri Pirko wrote:
> Fri, Jun 09, 2023 at 02:18:48PM CEST, arkadiusz.kubalewski@intel.com wrote:
>> From: Vadim Fedorenko <vadim.fedorenko@linux.dev>
>>
>> DPLL framework is used to represent and configure DPLL devices
>> in systems. Each device that has DPLL and can configure sources
>> and outputs can use this framework. Netlink interface is used to
>> provide configuration data and to receive notification messages
>> about changes in the configuration or status of DPLL device.
>> Inputs and outputs of the DPLL device are represented as special
>> objects which could be dynamically added to and removed from DPLL
>> device.
>>
>> Add kernel api header, make dpll subsystem available to device drivers.
>>
>> Add/update makefiles/Kconfig to allow compilation of dpll subsystem.
>>
>> Co-developed-by: Milena Olech <milena.olech@intel.com>
>> Signed-off-by: Milena Olech <milena.olech@intel.com>
>> Co-developed-by: Michal Michalik <michal.michalik@intel.com>
>> Signed-off-by: Michal Michalik <michal.michalik@intel.com>
>> Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
>> Co-developed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
>> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
>> ---
>> MAINTAINERS | 8 +++
>> drivers/Kconfig | 2 +
>> drivers/Makefile | 1 +
>> drivers/dpll/Kconfig | 7 ++
>> drivers/dpll/Makefile | 9 +++
>> include/linux/dpll.h | 144 ++++++++++++++++++++++++++++++++++++++++++
>> 6 files changed, 171 insertions(+)
>> create mode 100644 drivers/dpll/Kconfig
>> create mode 100644 drivers/dpll/Makefile
>> create mode 100644 include/linux/dpll.h
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 288d9a5edb9d..0e69429ecc55 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -6306,6 +6306,14 @@ F: Documentation/networking/device_drivers/ethernet/freescale/dpaa2/switch-drive
>> F: drivers/net/ethernet/freescale/dpaa2/dpaa2-switch*
>> F: drivers/net/ethernet/freescale/dpaa2/dpsw*
>>
>> +DPLL CLOCK SUBSYSTEM
>> +M: Vadim Fedorenko <vadfed@fb.com>
>> +L: netdev@vger.kernel.org
>> +S: Maintained
>
> I think status should be rather "Supported":
> "Supported: Someone is actually paid to look after this."
>
> Also, I think that it would be good to have Arkadiusz Kubalewski
> listed here, as he is the one that knows the subsystem by heart.
>
> Also, if you don't mind, I would be happy as a co-maintainer of the
> subsystem to be listed here, as I helped to shape the code and
> interfaces and I also know it pretty good.
>
Yes, sure, I'll update the list of maintainers to add both yourself and
Arkadiusz to the list, and of course the status to Supported.
>
>
>> +F: drivers/dpll/*
>> +F: include/net/dpll.h
>> +F: include/uapi/linux/dpll.h
>> +
>> DRBD DRIVER
>> M: Philipp Reisner <philipp.reisner@linbit.com>
>> M: Lars Ellenberg <lars.ellenberg@linbit.com>
>> diff --git a/drivers/Kconfig b/drivers/Kconfig
>> index 514ae6b24cb2..ce5f63918eba 100644
>> --- a/drivers/Kconfig
>> +++ b/drivers/Kconfig
>> @@ -243,4 +243,6 @@ source "drivers/hte/Kconfig"
>>
>> source "drivers/cdx/Kconfig"
>>
>> +source "drivers/dpll/Kconfig"
>> +
>> endmenu
>> diff --git a/drivers/Makefile b/drivers/Makefile
>> index 7241d80a7b29..6fea42a6dd05 100644
>> --- a/drivers/Makefile
>> +++ b/drivers/Makefile
>> @@ -195,3 +195,4 @@ obj-$(CONFIG_PECI) += peci/
>> obj-$(CONFIG_HTE) += hte/
>> obj-$(CONFIG_DRM_ACCEL) += accel/
>> obj-$(CONFIG_CDX_BUS) += cdx/
>> +obj-$(CONFIG_DPLL) += dpll/
>> diff --git a/drivers/dpll/Kconfig b/drivers/dpll/Kconfig
>> new file mode 100644
>> index 000000000000..a4cae73f20d3
>> --- /dev/null
>> +++ b/drivers/dpll/Kconfig
>> @@ -0,0 +1,7 @@
>> +# SPDX-License-Identifier: GPL-2.0-only
>> +#
>> +# Generic DPLL drivers configuration
>> +#
>> +
>> +config DPLL
>> + bool
>> diff --git a/drivers/dpll/Makefile b/drivers/dpll/Makefile
>> new file mode 100644
>> index 000000000000..2e5b27850110
>> --- /dev/null
>> +++ b/drivers/dpll/Makefile
>> @@ -0,0 +1,9 @@
>> +# SPDX-License-Identifier: GPL-2.0
>> +#
>> +# Makefile for DPLL drivers.
>> +#
>> +
>> +obj-$(CONFIG_DPLL) += dpll.o
>> +dpll-y += dpll_core.o
>> +dpll-y += dpll_netlink.o
>> +dpll-y += dpll_nl.o
>> diff --git a/include/linux/dpll.h b/include/linux/dpll.h
>> new file mode 100644
>> index 000000000000..a18bcaa13553
>> --- /dev/null
>> +++ b/include/linux/dpll.h
>> @@ -0,0 +1,144 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/*
>> + * Copyright (c) 2023 Meta Platforms, Inc. and affiliates
>> + * Copyright (c) 2023 Intel and affiliates
>> + */
>> +
>> +#ifndef __DPLL_H__
>> +#define __DPLL_H__
>> +
>> +#include <uapi/linux/dpll.h>
>> +#include <linux/device.h>
>> +#include <linux/netlink.h>
>> +
>> +struct dpll_device;
>> +struct dpll_pin;
>> +
>> +struct dpll_device_ops {
>> + int (*mode_get)(const struct dpll_device *dpll, void *dpll_priv,
>> + enum dpll_mode *mode, struct netlink_ext_ack *extack);
>> + int (*mode_set)(const struct dpll_device *dpll, void *dpll_priv,
>> + const enum dpll_mode mode,
>> + struct netlink_ext_ack *extack);
>> + bool (*mode_supported)(const struct dpll_device *dpll, void *dpll_priv,
>> + const enum dpll_mode mode,
>> + struct netlink_ext_ack *extack);
>> + int (*source_pin_idx_get)(const struct dpll_device *dpll,
>> + void *dpll_priv,
>> + u32 *pin_idx,
>> + struct netlink_ext_ack *extack);
>> + int (*lock_status_get)(const struct dpll_device *dpll, void *dpll_priv,
>> + enum dpll_lock_status *status,
>> + struct netlink_ext_ack *extack);
>> + int (*temp_get)(const struct dpll_device *dpll, void *dpll_priv,
>> + s32 *temp, struct netlink_ext_ack *extack);
>> +};
>> +
>> +struct dpll_pin_ops {
>> + int (*frequency_set)(const struct dpll_pin *pin, void *pin_priv,
>> + const struct dpll_device *dpll, void *dpll_priv,
>> + const u64 frequency,
>> + struct netlink_ext_ack *extack);
>> + int (*frequency_get)(const struct dpll_pin *pin, void *pin_priv,
>> + const struct dpll_device *dpll, void *dpll_priv,
>> + u64 *frequency, struct netlink_ext_ack *extack);
>> + int (*direction_set)(const struct dpll_pin *pin, void *pin_priv,
>> + const struct dpll_device *dpll, void *dpll_priv,
>> + const enum dpll_pin_direction direction,
>> + struct netlink_ext_ack *extack);
>> + int (*direction_get)(const struct dpll_pin *pin, void *pin_priv,
>> + const struct dpll_device *dpll, void *dpll_priv,
>> + enum dpll_pin_direction *direction,
>> + struct netlink_ext_ack *extack);
>> + int (*state_on_pin_get)(const struct dpll_pin *pin, void *pin_priv,
>> + const struct dpll_pin *parent_pin,
>> + void *parent_pin_priv,
>> + enum dpll_pin_state *state,
>> + struct netlink_ext_ack *extack);
>> + int (*state_on_dpll_get)(const struct dpll_pin *pin, void *pin_priv,
>> + const struct dpll_device *dpll,
>> + void *dpll_priv, enum dpll_pin_state *state,
>> + struct netlink_ext_ack *extack);
>> + int (*state_on_pin_set)(const struct dpll_pin *pin, void *pin_priv,
>> + const struct dpll_pin *parent_pin,
>> + void *parent_pin_priv,
>> + const enum dpll_pin_state state,
>> + struct netlink_ext_ack *extack);
>> + int (*state_on_dpll_set)(const struct dpll_pin *pin, void *pin_priv,
>> + const struct dpll_device *dpll,
>> + void *dpll_priv,
>> + const enum dpll_pin_state state,
>> + struct netlink_ext_ack *extack);
>> + int (*prio_get)(const struct dpll_pin *pin, void *pin_priv,
>> + const struct dpll_device *dpll, void *dpll_priv,
>> + u32 *prio, struct netlink_ext_ack *extack);
>> + int (*prio_set)(const struct dpll_pin *pin, void *pin_priv,
>> + const struct dpll_device *dpll, void *dpll_priv,
>> + const u32 prio, struct netlink_ext_ack *extack);
>> +};
>> +
>> +struct dpll_pin_frequency {
>> + u64 min;
>> + u64 max;
>> +};
>> +
>> +#define DPLL_PIN_FREQUENCY_RANGE(_min, _max) \
>> + { \
>> + .min = _min, \
>> + .max = _max, \
>> + }
>> +
>> +#define DPLL_PIN_FREQUENCY(_val) DPLL_PIN_FREQUENCY_RANGE(_val, _val)
>> +#define DPLL_PIN_FREQUENCY_1PPS \
>> + DPLL_PIN_FREQUENCY(DPLL_PIN_FREQUENCY_1_HZ)
>> +#define DPLL_PIN_FREQUENCY_10MHZ \
>> + DPLL_PIN_FREQUENCY(DPLL_PIN_FREQUENCY_10_MHZ)
>> +#define DPLL_PIN_FREQUENCY_IRIG_B \
>> + DPLL_PIN_FREQUENCY(DPLL_PIN_FREQUENCY_10_KHZ)
>> +#define DPLL_PIN_FREQUENCY_DCF77 \
>> + DPLL_PIN_FREQUENCY(DPLL_PIN_FREQUENCY_77_5_KHZ)
>> +
>> +struct dpll_pin_properties {
>> + const char *board_label;
>> + const char *panel_label;
>> + const char *package_label;
>> + enum dpll_pin_type type;
>> + unsigned long capabilities;
>> + u32 freq_supported_num;
>> + struct dpll_pin_frequency *freq_supported;
>> +};
>> +
>> +struct dpll_device
>> +*dpll_device_get(u64 clock_id, u32 dev_driver_id, struct module *module);
>> +
>> +void dpll_device_put(struct dpll_device *dpll);
>> +
>> +int dpll_device_register(struct dpll_device *dpll, enum dpll_type type,
>> + const struct dpll_device_ops *ops, void *priv);
>> +
>> +void dpll_device_unregister(struct dpll_device *dpll,
>> + const struct dpll_device_ops *ops, void *priv);
>> +
>> +struct dpll_pin
>> +*dpll_pin_get(u64 clock_id, u32 dev_driver_id, struct module *module,
>> + const struct dpll_pin_properties *prop);
>> +
>> +int dpll_pin_register(struct dpll_device *dpll, struct dpll_pin *pin,
>> + const struct dpll_pin_ops *ops, void *priv);
>> +
>> +void dpll_pin_unregister(struct dpll_device *dpll, struct dpll_pin *pin,
>> + const struct dpll_pin_ops *ops, void *priv);
>> +
>> +void dpll_pin_put(struct dpll_pin *pin);
>> +
>> +int dpll_pin_on_pin_register(struct dpll_pin *parent, struct dpll_pin *pin,
>> + const struct dpll_pin_ops *ops, void *priv);
>> +
>> +void dpll_pin_on_pin_unregister(struct dpll_pin *parent, struct dpll_pin *pin,
>> + const struct dpll_pin_ops *ops, void *priv);
>> +
>> +int dpll_device_change_ntf(struct dpll_device *dpll);
>> +
>> +int dpll_pin_change_ntf(struct dpll_pin *pin);
>
> Why exactly did you split this into a separate patch? To me, it does not
> make any sense. Please squash this header addition to the
>
Sounds reasonable.
>
>> +
>> +#endif
>> --
>> 2.37.3
>>
next prev parent reply other threads:[~2023-06-12 15:08 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-09 12:18 [RFC PATCH v8 00/10] Create common DPLL configuration API Arkadiusz Kubalewski
2023-06-09 12:18 ` [RFC PATCH v8 01/10] dpll: documentation on DPLL subsystem interface Arkadiusz Kubalewski
2023-06-10 3:22 ` Bagas Sanjaya
2023-06-12 14:24 ` Kubalewski, Arkadiusz
2023-06-10 16:28 ` Jiri Pirko
2023-06-12 15:24 ` Kubalewski, Arkadiusz
2023-06-12 22:30 ` Jakub Kicinski
2023-06-12 15:30 ` Bart Van Assche
2023-06-12 16:01 ` Kubalewski, Arkadiusz
2023-06-12 22:43 ` Jakub Kicinski
2023-06-13 9:55 ` Jiri Pirko
2023-06-13 16:38 ` Jakub Kicinski
2023-06-14 9:27 ` Jiri Pirko
2023-06-14 12:21 ` Kubalewski, Arkadiusz
2023-06-14 19:15 ` Jakub Kicinski
2023-06-14 19:23 ` Jakub Kicinski
2023-06-15 10:18 ` Jiri Pirko
2023-06-15 13:44 ` Kubalewski, Arkadiusz
2023-06-15 16:31 ` Jakub Kicinski
2023-06-17 10:36 ` Jiri Pirko
2023-06-12 23:49 ` Jakub Kicinski
2023-06-14 12:23 ` Kubalewski, Arkadiusz
2023-06-09 12:18 ` [RFC PATCH v8 02/10] dpll: spec: Add Netlink spec in YAML Arkadiusz Kubalewski
2023-06-10 16:22 ` Jiri Pirko
2023-06-15 13:42 ` Kubalewski, Arkadiusz
2023-06-09 12:18 ` [RFC PATCH v8 03/10] dpll: core: Add DPLL framework base functions Arkadiusz Kubalewski
2023-06-10 17:38 ` Jiri Pirko
2023-06-21 16:28 ` Kubalewski, Arkadiusz
2023-06-21 18:55 ` Kubalewski, Arkadiusz
2023-06-22 7:05 ` Jiri Pirko
2023-06-11 9:36 ` Jiri Pirko
2023-06-12 7:25 ` Paolo Abeni
2023-06-21 20:38 ` Kubalewski, Arkadiusz
2023-06-11 10:01 ` Jiri Pirko
2023-06-12 23:45 ` Jakub Kicinski
2023-06-21 21:17 ` Kubalewski, Arkadiusz
2023-06-22 7:09 ` Jiri Pirko
2023-06-09 12:18 ` [RFC PATCH v8 04/10] dpll: netlink: " Arkadiusz Kubalewski
2023-06-11 11:42 ` Jiri Pirko
2023-06-23 1:01 ` Kubalewski, Arkadiusz
2023-06-21 11:18 ` Petr Oros
2023-06-21 11:53 ` Jiri Pirko
2023-06-21 13:07 ` Jiri Pirko
2023-06-23 0:56 ` Kubalewski, Arkadiusz
2023-06-23 7:48 ` Jiri Pirko
2023-06-23 0:56 ` Kubalewski, Arkadiusz
2023-06-09 12:18 ` [RFC PATCH v8 05/10] dpll: api header: " Arkadiusz Kubalewski
2023-06-10 7:25 ` Jiri Pirko
2023-06-10 7:29 ` Jiri Pirko
2023-06-12 15:00 ` Vadim Fedorenko [this message]
2023-06-10 7:32 ` Jiri Pirko
2023-06-09 12:18 ` [RFC PATCH v8 06/10] netdev: expose DPLL pin handle for netdevice Arkadiusz Kubalewski
2023-06-12 9:17 ` Petr Oros
2023-06-13 13:51 ` Jiri Pirko
2023-06-14 12:25 ` Kubalewski, Arkadiusz
2023-06-09 12:18 ` [RFC PATCH v8 07/10] ice: add admin commands to access cgu configuration Arkadiusz Kubalewski
2023-06-10 8:46 ` Jiri Pirko
2023-06-15 21:35 ` Kubalewski, Arkadiusz
2023-06-09 12:18 ` [RFC PATCH v8 08/10] ice: implement dpll interface to control cgu Arkadiusz Kubalewski
2023-06-10 9:57 ` Jiri Pirko
2023-06-19 18:08 ` Kubalewski, Arkadiusz
2023-06-21 12:28 ` Jiri Pirko
2023-06-10 16:36 ` Jiri Pirko
2023-06-19 20:34 ` Kubalewski, Arkadiusz
2023-06-21 12:29 ` Jiri Pirko
2023-06-29 6:14 ` Jiri Pirko
2023-07-03 12:37 ` Kubalewski, Arkadiusz
2023-07-10 8:23 ` Jiri Pirko
2023-06-09 12:18 ` [RFC PATCH v8 09/10] ptp_ocp: implement DPLL ops Arkadiusz Kubalewski
2023-06-10 8:06 ` Jiri Pirko
2023-06-09 12:18 ` [RFC PATCH v8 10/10] mlx5: Implement SyncE support using DPLL infrastructure Arkadiusz Kubalewski
2023-06-09 23:27 ` [RFC PATCH v8 00/10] Create common DPLL configuration API Jakub Kicinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=610b2e82-7b84-4ccd-a6da-1f018c7f6568@linux.dev \
--to=vadim.fedorenko@linux.dev \
--cc=airlied@redhat.com \
--cc=andy.ren@getcruise.com \
--cc=anthony.l.nguyen@intel.com \
--cc=arkadiusz.kubalewski@intel.com \
--cc=arnd@arndb.de \
--cc=axboe@kernel.dk \
--cc=benjamin.tissoires@redhat.com \
--cc=claudiajkang@gmail.com \
--cc=corbet@lwn.net \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=geert+renesas@glider.be \
--cc=gregkh@linuxfoundation.org \
--cc=hkallweit1@gmail.com \
--cc=idosch@nvidia.com \
--cc=intel-wired-lan@lists.osuosl.org \
--cc=jacek.lawrynowicz@linux.intel.com \
--cc=javierm@redhat.com \
--cc=jesse.brandeburg@intel.com \
--cc=jiri@resnulli.us \
--cc=jonathan.lemon@gmail.com \
--cc=kuba@kernel.org \
--cc=kuniyu@amazon.com \
--cc=leon@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rdma@vger.kernel.org \
--cc=linux@zary.sk \
--cc=liuhangbin@gmail.com \
--cc=lucien.xin@gmail.com \
--cc=masahiroy@kernel.org \
--cc=michal.michalik@intel.com \
--cc=milena.olech@intel.com \
--cc=mschmidt@redhat.com \
--cc=mst@redhat.com \
--cc=netdev@vger.kernel.org \
--cc=nicolas.dichtel@6wind.com \
--cc=nipun.gupta@amd.com \
--cc=ogabbay@kernel.org \
--cc=pabeni@redhat.com \
--cc=phil@nwl.cc \
--cc=poros@redhat.com \
--cc=razor@blackwall.org \
--cc=ricardo.canuelo@collabora.com \
--cc=richardcochran@gmail.com \
--cc=saeedm@nvidia.com \
--cc=sj@kernel.org \
--cc=tzimmermann@suse.de \
--cc=vadfed@fb.com \
--cc=vadfed@meta.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).