From: Christian Marangi <ansuelsmth@gmail.com>
To: Lorenzo Bianconi <lorenzo@kernel.org>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Simon Horman <horms@kernel.org>, Jonathan Corbet <corbet@lwn.net>,
Shuah Khan <skhan@linuxfoundation.org>,
Heiner Kallweit <hkallweit1@gmail.com>,
Russell King <linux@armlinux.org.uk>,
Saravana Kannan <saravanak@kernel.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
netdev@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org,
Maxime Chevallier <maxime.chevallier@bootlin.com>
Subject: Re: [PATCH net-next v9 12/12] net: airoha: add phylink support
Date: Mon, 20 Jul 2026 17:43:19 +0200 [thread overview]
Message-ID: <6a5e421d.9099b29d.2f0302.1cf4@mx.google.com> (raw)
In-Reply-To: <al5AVLxWRhnpGzJ1@lore-desk>
On Mon, Jul 20, 2026 at 05:35:48PM +0200, Lorenzo Bianconi wrote:
> > Add phylink support for each GDM port. For GDM1 add the internal interface
> > mode as the only supported mode. For GDM2/3/4 add the required
> > configuration of the PCS to make the external PHY or attached SFP cage
> > work.
> >
> > These needs to be defined in the GDM port node using the pcs-handle
> > property.
> >
> > Update and provide a .get/set_link_ksettings function that use phylink
> > for ethtool OPs now that we fully support phylink.
> >
> > Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
> > ---
> > drivers/net/ethernet/airoha/Kconfig | 1 +
> > drivers/net/ethernet/airoha/airoha_eth.c | 194 +++++++++++++++++++++-
> > drivers/net/ethernet/airoha/airoha_eth.h | 7 +-
> > drivers/net/ethernet/airoha/airoha_regs.h | 12 ++
> > 4 files changed, 207 insertions(+), 7 deletions(-)
> >
> > diff --git a/drivers/net/ethernet/airoha/Kconfig b/drivers/net/ethernet/airoha/Kconfig
> > index 1f6640a15fc9..789906516bf8 100644
> > --- a/drivers/net/ethernet/airoha/Kconfig
> > +++ b/drivers/net/ethernet/airoha/Kconfig
> > @@ -20,6 +20,7 @@ config NET_AIROHA
> > depends on NET_DSA || !NET_DSA
> > select NET_AIROHA_NPU
> > select PAGE_POOL
> > + select PHYLINK
> > help
> > This driver supports the gigabit ethernet MACs in the
> > Airoha SoC family.
> > diff --git a/drivers/net/ethernet/airoha/airoha_eth.c b/drivers/net/ethernet/airoha/airoha_eth.c
> > index 59001fd4b6f7..ed1ac032f337 100644
> > --- a/drivers/net/ethernet/airoha/airoha_eth.c
> > +++ b/drivers/net/ethernet/airoha/airoha_eth.c
> > @@ -8,6 +8,7 @@
> > #include <linux/of_reserved_mem.h>
> > #include <linux/platform_device.h>
> > #include <linux/tcp.h>
> > +#include <linux/pcs/pcs.h>
> > #include <linux/u64_stats_sync.h>
> > #include <net/dst_metadata.h>
> > #include <net/page_pool/helpers.h>
> > @@ -1837,7 +1838,7 @@ static void airoha_update_hw_stats(struct airoha_gdm_dev *dev)
> > struct airoha_gdm_port *port = dev->port;
> > int i;
> >
> > - spin_lock(&port->stats_lock);
> > + spin_lock(&port->lock);
>
> Hi Christian,
>
> as pointed out in a previous email, I do not like the approach of reusing this
> spin_lock for airoha_mac_link_up(). Can we use rtl_lock() (when necessary) as
> pointed out before?
>
For context, quoting from the previous series, the suggestion is to use
rtnl_is_locked() and then lock accordingly but I didn't find other usage of
that in other driver (aside from core net) and I don't like the use of
is_locked. I can already see the BOT saying that in the timeframe of
is_locked and writing the register another interface goes up causing a
race.
Guess I will add a simple mutex for this case and the other.
> >
> > for (i = 0; i < ARRAY_SIZE(port->devs); i++) {
> > if (port->devs[i])
> > @@ -1848,7 +1849,7 @@ static void airoha_update_hw_stats(struct airoha_gdm_dev *dev)
> > airoha_fe_set(dev->eth, REG_FE_GDM_MIB_CLEAR(port->id),
> > FE_GDM_MIB_RX_CLEAR_MASK | FE_GDM_MIB_TX_CLEAR_MASK);
> >
> > - spin_unlock(&port->stats_lock);
> > + spin_unlock(&port->lock);
> > }
> >
> > static void airoha_dev_set_xmit_frame_size(struct net_device *netdev)
> > @@ -1870,6 +1871,14 @@ static int airoha_dev_open(struct net_device *netdev)
> > u32 pse_port = FE_PSE_PORT_PPE1;
> > int err;
> >
> > + err = phylink_of_phy_connect(dev->phylink, netdev->dev.of_node, 0);
> > + if (err) {
> > + netdev_err(netdev, "could not attach PHY: %d\n", err);
> > + return err;
> > + }
> > +
> > + phylink_start(dev->phylink);
> > +
> > netif_tx_start_all_queues(netdev);
> > err = airoha_set_vip_for_gdm_port(dev, true);
> > if (err)
> > @@ -1909,6 +1918,10 @@ static int airoha_dev_stop(struct net_device *netdev)
> > airoha_set_gdm_port_fwd_cfg(qdma->eth,
> > REG_GDM_FWD_CFG(port->id),
> > FE_PSE_PORT_DROP);
> > +
> > + phylink_stop(dev->phylink);
> > + phylink_disconnect_phy(dev->phylink);
> > +
> > return 0;
> > }
> >
> > @@ -2389,6 +2402,24 @@ airoha_ethtool_get_rmon_stats(struct net_device *netdev,
> > } while (u64_stats_fetch_retry(&dev->stats.syncp, start));
> > }
> >
> > +static int
> > +airoha_ethtool_get_link_ksettings(struct net_device *netdev,
> > + struct ethtool_link_ksettings *cmd)
> > +{
> > + struct airoha_gdm_dev *dev = netdev_priv(netdev);
> > +
> > + return phylink_ethtool_ksettings_get(dev->phylink, cmd);
> > +}
> > +
> > +static int
> > +airoha_ethtool_set_link_ksettings(struct net_device *netdev,
> > + const struct ethtool_link_ksettings *cmd)
> > +{
> > + struct airoha_gdm_dev *dev = netdev_priv(netdev);
> > +
> > + return phylink_ethtool_ksettings_set(dev->phylink, cmd);
> > +}
> > +
> > static int airoha_qdma_set_chan_tx_sched(struct net_device *netdev,
> > int channel, enum tx_sched_mode mode,
> > const u16 *weights, u8 n_weights)
> > @@ -3120,7 +3151,8 @@ static const struct ethtool_ops airoha_ethtool_ops = {
> > .get_drvinfo = airoha_ethtool_get_drvinfo,
> > .get_eth_mac_stats = airoha_ethtool_get_mac_stats,
> > .get_rmon_stats = airoha_ethtool_get_rmon_stats,
> > - .get_link_ksettings = phy_ethtool_get_link_ksettings,
> > + .get_link_ksettings = airoha_ethtool_get_link_ksettings,
> > + .set_link_ksettings = airoha_ethtool_set_link_ksettings,
> > .get_link = ethtool_op_get_link,
> > };
> >
> > @@ -3176,6 +3208,155 @@ bool airoha_is_valid_gdm_dev(struct airoha_eth *eth,
> > return false;
> > }
> >
> > +/* Nothing to do in MAC, everything is handled in PCS */
> > +static void airoha_mac_config(struct phylink_config *config, unsigned int mode,
> > + const struct phylink_link_state *state)
> > +{
> > +}
> > +
> > +static void airoha_mac_link_up(struct phylink_config *config, struct phy_device *phy,
> > + unsigned int mode, phy_interface_t interface,
> > + int speed, int duplex, bool tx_pause, bool rx_pause)
> > +{
> > + struct airoha_gdm_dev *dev = container_of(config, struct airoha_gdm_dev,
> > + phylink_config);
> > + struct airoha_gdm_port *port = dev->port;
> > + struct airoha_eth *eth = dev->eth;
> > + u32 frag_size_tx, frag_size_rx;
> > + u32 mask, val;
> > +
> > + /* TX/RX frag is configured only for GDM4 */
> > + if (port->id != AIROHA_GDM4_IDX)
> > + return;
> > +
> > + switch (speed) {
> > + case SPEED_10000:
> > + case SPEED_5000:
> > + frag_size_tx = 8;
> > + frag_size_rx = 8;
> > + break;
> > + case SPEED_2500:
> > + frag_size_tx = 2;
> > + frag_size_rx = 1;
> > + break;
> > + default:
> > + frag_size_tx = 1;
> > + frag_size_rx = 0;
> > + }
> > +
> > + spin_lock(&port->lock);
> > +
> > + /* Configure TX/RX frag based on speed */
> > + if (dev->nbq == 1) {
> > + mask = GDM4_SGMII1_TX_FRAG_SIZE_MASK;
> > + val = FIELD_PREP(GDM4_SGMII1_TX_FRAG_SIZE_MASK,
> > + frag_size_tx);
> > + } else {
> > + mask = GDM4_SGMII0_TX_FRAG_SIZE_MASK;
> > + val = FIELD_PREP(GDM4_SGMII0_TX_FRAG_SIZE_MASK,
> > + frag_size_tx);
> > + }
> > + airoha_fe_rmw(eth, REG_FE_GDM4_TMBI_FRAG, mask, val);
> > +
> > + if (dev->nbq == 1) {
> > + mask = GDM4_SGMII1_RX_FRAG_SIZE_MASK;
> > + val = FIELD_PREP(GDM4_SGMII1_RX_FRAG_SIZE_MASK,
> > + frag_size_rx);
> > + } else {
> > + mask = GDM4_SGMII0_RX_FRAG_SIZE_MASK;
> > + val = FIELD_PREP(GDM4_SGMII0_RX_FRAG_SIZE_MASK,
> > + frag_size_rx);
> > + }
> > + airoha_fe_rmw(eth, REG_FE_GDM4_RMBI_FRAG, mask, val);
> > +
> > + spin_unlock(&port->lock);
> > +}
> > +
> > +/* Nothing to do in MAC, everything is handled in PCS */
> > +static void airoha_mac_link_down(struct phylink_config *config, unsigned int mode,
> > + phy_interface_t interface)
> > +{
> > +}
> > +
> > +static const struct phylink_mac_ops airoha_phylink_ops = {
> > + .mac_config = airoha_mac_config,
> > + .mac_link_up = airoha_mac_link_up,
> > + .mac_link_down = airoha_mac_link_down,
> > +};
> > +
> > +static int airoha_fill_available_pcs(struct phylink_config *config,
> > + struct phylink_pcs **available_pcs,
> > + unsigned int num_possible_pcs)
> > +{
> > + struct device *dev = config->dev;
> > +
> > + return fwnode_phylink_pcs_parse(dev_fwnode(dev), available_pcs,
> > + num_possible_pcs);
> > +}
> > +
> > +static int airoha_setup_phylink(struct net_device *netdev)
> > +{
> > + struct airoha_gdm_dev *dev = netdev_priv(netdev);
> > + struct device_node *np = netdev->dev.of_node;
> > + struct airoha_gdm_port *port = dev->port;
> > + struct phylink_config *config;
> > + phy_interface_t phy_mode;
> > + struct phylink *phylink;
> > + int err;
> > +
> > + err = of_get_phy_mode(np, &phy_mode);
> > + if (err) {
> > + dev_err(&netdev->dev, "incorrect phy-mode\n");
> > + return err;
> > + }
> > +
> > + config = &dev->phylink_config;
> > + config->dev = &netdev->dev;
> > + config->type = PHYLINK_NETDEV;
> > +
> > + /*
> > + * GDM1 only supports internal for Embedded Switch
> > + * and doesn't require a PCS.
> > + */
> > + if (port->id == AIROHA_GDM1_IDX) {
> > + config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
> > + MAC_10000FD;
> > +
> > + __set_bit(PHY_INTERFACE_MODE_INTERNAL,
> > + config->supported_interfaces);
> > + } else {
> > + config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
> > + MAC_10 | MAC_100 | MAC_1000 |
> > + MAC_2500FD | MAC_5000FD | MAC_10000FD;
> > +
> > + config->num_possible_pcs = fwnode_phylink_pcs_count(dev_fwnode(config->dev));
> > + config->fill_available_pcs = airoha_fill_available_pcs;
> > +
> > + __set_bit(PHY_INTERFACE_MODE_SGMII,
> > + config->supported_interfaces);
> > + __set_bit(PHY_INTERFACE_MODE_1000BASEX,
> > + config->supported_interfaces);
> > + __set_bit(PHY_INTERFACE_MODE_2500BASEX,
> > + config->supported_interfaces);
> > + __set_bit(PHY_INTERFACE_MODE_10GBASER,
> > + config->supported_interfaces);
> > + __set_bit(PHY_INTERFACE_MODE_USXGMII,
> > + config->supported_interfaces);
> > +
> > + phy_interface_copy(config->pcs_interfaces,
> > + config->supported_interfaces);
> > + }
> > +
> > + phylink = phylink_create(config, of_fwnode_handle(np),
> > + phy_mode, &airoha_phylink_ops);
> > + if (IS_ERR(phylink))
> > + return PTR_ERR(phylink);
> > +
> > + dev->phylink = phylink;
> > +
> > + return 0;
> > +}
> > +
> > static int airoha_alloc_gdm_device(struct airoha_eth *eth,
> > struct airoha_gdm_port *port,
> > int nbq, struct device_node *np)
> > @@ -3239,7 +3420,7 @@ static int airoha_alloc_gdm_device(struct airoha_eth *eth,
> > dev->nbq = nbq;
> > port->devs[index] = dev;
> >
> > - return 0;
> > + return airoha_setup_phylink(netdev);
> > }
> >
> > static int airoha_alloc_gdm_port(struct airoha_eth *eth,
> > @@ -3274,7 +3455,7 @@ static int airoha_alloc_gdm_port(struct airoha_eth *eth,
> > return -ENOMEM;
> >
> > port->id = id;
> > - spin_lock_init(&port->stats_lock);
> > + spin_lock_init(&port->lock);
> > eth->ports[p] = port;
> >
> > err = airoha_metadata_dst_alloc(port);
> > @@ -3471,6 +3652,8 @@ static int airoha_probe(struct platform_device *pdev)
> > netdev = netdev_from_priv(dev);
> > if (netdev->reg_state == NETREG_REGISTERED)
> > unregister_netdev(netdev);
> > + if (dev->phylink)
> > + phylink_destroy(dev->phylink);
> > of_node_put(netdev->dev.of_node);
> > }
> > airoha_metadata_dst_free(port);
> > @@ -3509,6 +3692,7 @@ static void airoha_remove(struct platform_device *pdev)
> >
> > netdev = netdev_from_priv(dev);
> > unregister_netdev(netdev);
> > + phylink_destroy(dev->phylink);
> > of_node_put(netdev->dev.of_node);
> > }
> > airoha_metadata_dst_free(port);
> > diff --git a/drivers/net/ethernet/airoha/airoha_eth.h b/drivers/net/ethernet/airoha/airoha_eth.h
> > index f6d01a8e8da1..b49fc5304b3a 100644
> > --- a/drivers/net/ethernet/airoha/airoha_eth.h
> > +++ b/drivers/net/ethernet/airoha/airoha_eth.h
> > @@ -561,6 +561,9 @@ struct airoha_gdm_dev {
> > int nbq;
> >
> > struct airoha_hw_stats stats;
> > +
> > + struct phylink *phylink;
> > + struct phylink_config phylink_config;
> > };
> >
> > struct airoha_gdm_port {
> > @@ -568,8 +571,8 @@ struct airoha_gdm_port {
> > int id;
> > int users;
> >
> > - /* protect concurrent hw_stats accesses */
> > - spinlock_t stats_lock;
> > + /* protect concurrent hw_stats and frag register accesses */
> > + spinlock_t lock;
> >
> > struct metadata_dst *dsa_meta[AIROHA_MAX_DSA_PORTS];
> > };
> > diff --git a/drivers/net/ethernet/airoha/airoha_regs.h b/drivers/net/ethernet/airoha/airoha_regs.h
> > index 6fed63d013b4..8df02f51211c 100644
> > --- a/drivers/net/ethernet/airoha/airoha_regs.h
> > +++ b/drivers/net/ethernet/airoha/airoha_regs.h
> > @@ -357,6 +357,18 @@
> > #define IP_FRAGMENT_PORT_MASK GENMASK(8, 5)
> > #define IP_FRAGMENT_NBQ_MASK GENMASK(4, 0)
> >
> > +#define REG_FE_GDM4_TMBI_FRAG 0x2028
> > +#define GDM4_SGMII1_TX_WEIGHT_MASK GENMASK(31, 26)
> > +#define GDM4_SGMII1_TX_FRAG_SIZE_MASK GENMASK(25, 16)
> > +#define GDM4_SGMII0_TX_WEIGHT_MASK GENMASK(15, 10)
> > +#define GDM4_SGMII0_TX_FRAG_SIZE_MASK GENMASK(9, 0)
> > +
> > +#define REG_FE_GDM4_RMBI_FRAG 0x202c
> > +#define GDM4_SGMII1_RX_WEIGHT_MASK GENMASK(31, 26)
> > +#define GDM4_SGMII1_RX_FRAG_SIZE_MASK GENMASK(25, 16)
> > +#define GDM4_SGMII0_RX_WEIGHT_MASK GENMASK(15, 10)
> > +#define GDM4_SGMII0_RX_FRAG_SIZE_MASK GENMASK(9, 0)
> > +
> > #define REG_MC_VLAN_EN 0x2100
> > #define MC_VLAN_EN_MASK BIT(0)
> >
> > --
> > 2.53.0
> >
--
Ansuel
next prev parent reply other threads:[~2026-07-20 15:43 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-17 6:54 [PATCH net-next v9 00/12] net: pcs: Introduce support for fwnode PCS Christian Marangi
2026-07-17 6:54 ` [PATCH net-next v9 01/12] net: phylink: keep and use MAC supported_interfaces in phylink struct Christian Marangi
2026-07-21 11:59 ` Maxime Chevallier
2026-07-17 6:54 ` [PATCH net-next v9 02/12] net: phylink: introduce internal phylink PCS handling Christian Marangi
2026-07-21 11:59 ` Maxime Chevallier
2026-07-17 6:54 ` [PATCH net-next v9 03/12] net: phylink: add phylink_release_pcs() to externally release a PCS Christian Marangi
2026-07-21 12:01 ` Maxime Chevallier
2026-07-17 6:54 ` [PATCH net-next v9 04/12] net: pcs: implement Firmware node support for PCS driver Christian Marangi
2026-07-17 6:54 ` [PATCH net-next v9 05/12] net: phylink: support late PCS provider attach Christian Marangi
2026-07-17 6:54 ` [PATCH net-next v9 06/12] net: Document PCS subsystem Christian Marangi
2026-07-21 12:11 ` Maxime Chevallier
2026-07-17 6:54 ` [PATCH net-next v9 07/12] MAINTAINERS: add myself as PCS subsystem maintainer Christian Marangi
2026-07-17 6:54 ` [PATCH net-next v9 08/12] of: property: fw_devlink: Add support for "pcs-handle" Christian Marangi
2026-07-17 6:54 ` [PATCH net-next v9 09/12] net: phylink: add .pcs_link_down PCS OP Christian Marangi
2026-07-21 12:13 ` Maxime Chevallier
2026-07-17 6:54 ` [PATCH net-next v9 10/12] dt-bindings: net: pcs: Document support for Airoha Ethernet PCS Christian Marangi
2026-07-17 6:54 ` [PATCH net-next v9 11/12] net: pcs: airoha: add PCS driver for Airoha AN7581 SoC Christian Marangi
2026-07-17 6:54 ` [PATCH net-next v9 12/12] net: airoha: add phylink support Christian Marangi
2026-07-20 15:35 ` Lorenzo Bianconi
2026-07-20 15:43 ` Christian Marangi [this message]
2026-07-21 10:10 ` Lorenzo Bianconi
2026-07-21 11:58 ` [PATCH net-next v9 00/12] net: pcs: Introduce support for fwnode PCS Maxime Chevallier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6a5e421d.9099b29d.2f0302.1cf4@mx.google.com \
--to=ansuelsmth@gmail.com \
--cc=andrew+netdev@lunn.ch \
--cc=conor+dt@kernel.org \
--cc=corbet@lwn.net \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=hkallweit1@gmail.com \
--cc=horms@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux@armlinux.org.uk \
--cc=lorenzo@kernel.org \
--cc=maxime.chevallier@bootlin.com \
--cc=netdev@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=pabeni@redhat.com \
--cc=robh@kernel.org \
--cc=saravanak@kernel.org \
--cc=skhan@linuxfoundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox