[PATCH v2] fbdev: fbmem: convert CONFIG_FB_LOGO_CENTER into a cmd, line option

[Peter Rosin <peda@axentia.se>]

On 2019-01-07 10:11, Geert Uytterhoeven wrote:
> Hi Peter,
> 
> On Mon, Jan 7, 2019 at 10:03 AM Peter Rosin <peda@axentia.se> wrote:
>> On 2019-01-07 09:59, Peter Rosin wrote:
>>> On 2019-01-07 09:40, Geert Uytterhoeven wrote:
>>>> On Mon, Jan 7, 2019 at 9:26 AM Peter Rosin <peda@axentia.se> wrote:
>>>>> On 2019-01-06 10:33, Geert Uytterhoeven wrote:
>>>>>> On Mon, Nov 26, 2018 at 10:59 PM Peter Rosin <peda@axentia.se> wrote:
>>>>>>> If there are extra logos (CONFIG_FB_LOGO_EXTRA) the heights of these
>>>>>>> extra logos are not considered when centering the first logo vertically.
>>>>>>>
>>>>>>> Signed-off-by: Peter Rosin <peda@axentia.se>
>>>>>>
>>>>>>> --- a/drivers/video/logo/Kconfig
>>>>>>> +++ b/drivers/video/logo/Kconfig
>>>>>>> @@ -10,6 +10,15 @@ menuconfig LOGO
>>>>>>>
>>>>>>>  if LOGO
>>>>>>>
>>>>>>> +config FB_LOGO_CENTER
>>>>>>> +       bool "Center the logo"
>>>>>>> +       depends on FB=y
>>>>>>> +       help
>>>>>>> +         When this option is selected, the bootup logo is centered both
>>>>>>> +         horizontally and vertically. If more than one logo is displayed
>>>>>>> +         due to multiple CPUs, the collected line of logos is centered
>>>>>>> +         as a whole.
>>>>>>> +
>>>>>>
>>>>>> Isn't a kernel command line option more suitable to configure the position
>>>>>> of the logo?
>>>>>
>>>>> That didn't occur to me previously, but it does make sense now that you
>>>>> mention it. This is on top of v5.0-rc1, and if applied before v5.0 we
>>>>> can avoid possible regressions for folks who might start to rely on
>>>>> CONFIG_FB_LOGO_CENTER if v5.0 is released w/o this.
>>>>>
>>>>> Cheers,
>>>>> Peter
>>>>>
>>>>> From de7353ab519ba9b5c9ea3f62d607bb8e94b687cc Mon Sep 17 00:00:00 2001
>>>>> From: Peter Rosin <peda@axentia.se>
>>>>> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
>>>>> Cc: Jonathan Corbet <corbet@lwn.net>
>>>>> Cc: Peter Rosin <peda@axentia.se>
>>>>> Cc: dri-devel@lists.freedesktop.org
>>>>> Cc: linux-fbdev@vger.kernel.org
>>>>> Cc: linux-doc@vger.kernel.org
>>>>> To: linux-kernel@vger.kernel.org
>>>>> Date: Mon, 7 Jan 2019 08:35:26 +0100
>>>>> Subject: [PATCH] fbdev: fbmem: convert CONFIG_FB_LOGO_CENTER into a cmd line
>>>>>  option
>>>>>
>>>>> A command line option is much more flexible than a config option and
>>>>> the supporting code is small. Gets rid of #ifdefs in the code too...
>>>>>
>>>>> Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
>>>>> Signed-off-by: Peter Rosin <peda@axentia.se>
>>>>
>>>> Thanks for your patch!
>>>>
>>>>> --- a/Documentation/fb/fbcon.txt
>>>>> +++ b/Documentation/fb/fbcon.txt
>>>>> @@ -163,6 +163,12 @@ C. Boot options
>>>>>         be preserved until there actually is some text is output to the console.
>>>>>         This option causes fbcon to bind immediately to the fbdev device.
>>>>>
>>>>> +7. fbcon=center-logo
>>>>> +
>>>>> +       When this option is selected, the bootup logo is centered both
>>>>> +       horizontally and vertically. If more than one logo is displayed due to
>>>>> +       multiple CPUs, the collected line of logos is centered as a whole.
>>>>> +
>>>>
>>>> What about making this more generic, than an option specific for centering?
>>>> Else people want fbcon=left-logo or fbcon=right-logo soon?
>>>>
>>>>     fbcon=logo-pos:<pos>
>>>>
>>>> With <pos> being "center", "left", "top", "right", "bottom", and combinations
>>>> like "top,center"? Or is that complicating stuff too much?
>>>
>>> I'm not too keen on implementing all that when I have zero use for it. I can
>>> however rename the trigger for the existing fb_center_logo bool to
>>>
>>>       fbcon=logo-pos:center
>>>
>>> and add a check for "top,left" to reset the bool to false. Then the other
>>> variants can be added later by whomever and when needed.
>>>
>>> Is that good enough?
>>
>> Ouch, I just realized that using a comma is a no-go, as that is already
>> separating fbcon suboptions, so I suggest top-left instead.
> 
> Sure, sounds fine to me.  I just want to avoid having a parameter system
> that complicates future extension.
> I think you can drop the check for top-left, as the bool defaults to false.

Right. So, here's an update...

Again, it would probably be best if this went in before 5.0 is released.

Changes since v1:
- rename from fbcon=center-logo option to fbcon=logo-pos:center (and adjust
  the help text accordingly).

Cheers,
Peter

From ebfb2feb7ea4298ac9c222e6ea6f9c9a92452084 Mon Sep 17 00:00:00 2001
From: Peter Rosin <peda@axentia.se>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Peter Rosin <peda@axentia.se>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org
Cc: linux-doc@vger.kernel.org
To: linux-kernel@vger.kernel.org
Date: Mon, 7 Jan 2019 08:35:26 +0100
Subject: [PATCH v2] fbdev: fbmem: convert CONFIG_FB_LOGO_CENTER into a cmd
 line option

A command line option is much more flexible than a config option and
the supporting code is small. Gets rid of #ifdefs in the code too...

Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Peter Rosin <peda@axentia.se>
---
 Documentation/fb/fbcon.txt       |  8 ++++++++
 drivers/video/fbdev/core/fbcon.c |  7 +++++++
 drivers/video/fbdev/core/fbmem.c | 19 ++++++++++---------
 drivers/video/logo/Kconfig       |  9 ---------
 include/linux/fb.h               |  1 +
 5 files changed, 26 insertions(+), 18 deletions(-)

diff --git a/Documentation/fb/fbcon.txt b/Documentation/fb/fbcon.txt
index 62af30511a95..60a5ec04e8f0 100644
--- a/Documentation/fb/fbcon.txt
+++ b/Documentation/fb/fbcon.txt
@@ -163,6 +163,14 @@ C. Boot options
 	be preserved until there actually is some text is output to the console.
 	This option causes fbcon to bind immediately to the fbdev device.
 
+7. fbcon=logo-pos:<location>
+
+	The only possible 'location' is 'center' (without quotes), and when
+	given, the bootup logo is moved from the default top-left corner
+	location to the center of the framebuffer. If more than one logo is
+	displayed due to multiple CPUs, the collected line of logos is moved
+	as a whole.
+
 C. Attaching, Detaching and Unloading
 
 Before going on to how to attach, detach and unload the framebuffer console, an
diff --git a/drivers/video/fbdev/core/fbcon.c b/drivers/video/fbdev/core/fbcon.c
index 8976190b6c1f..bfa1360ec750 100644
--- a/drivers/video/fbdev/core/fbcon.c
+++ b/drivers/video/fbdev/core/fbcon.c
@@ -510,6 +510,13 @@ static int __init fb_console_setup(char *this_opt)
 			continue;
 		}
 #endif
+
+		if (!strncmp(options, "logo-pos:", 9)) {
+			options += 9;
+			if (!strcmp(options, "center"))
+				fb_center_logo = true;
+			continue;
+		}
 	}
 	return 1;
 }
diff --git a/drivers/video/fbdev/core/fbmem.c b/drivers/video/fbdev/core/fbmem.c
index 558ed2ed3124..cb43a2258c51 100644
--- a/drivers/video/fbdev/core/fbmem.c
+++ b/drivers/video/fbdev/core/fbmem.c
@@ -53,6 +53,9 @@ EXPORT_SYMBOL(registered_fb);
 int num_registered_fb __read_mostly;
 EXPORT_SYMBOL(num_registered_fb);
 
+bool fb_center_logo __read_mostly;
+EXPORT_SYMBOL(fb_center_logo);
+
 static struct fb_info *get_fb_info(unsigned int idx)
 {
 	struct fb_info *fb_info;
@@ -506,8 +509,7 @@ static int fb_show_logo_line(struct fb_info *info, int rotate,
 		fb_set_logo(info, logo, logo_new, fb_logo.depth);
 	}
 
-#ifdef CONFIG_FB_LOGO_CENTER
-	{
+	if (fb_center_logo) {
 		int xres = info->var.xres;
 		int yres = info->var.yres;
 
@@ -520,11 +522,11 @@ static int fb_show_logo_line(struct fb_info *info, int rotate,
 			--n;
 		image.dx = (xres - n * (logo->width + 8) - 8) / 2;
 		image.dy = y ?: (yres - logo->height) / 2;
+	} else {
+		image.dx = 0;
+		image.dy = y;
 	}
-#else
-	image.dx = 0;
-	image.dy = y;
-#endif
+
 	image.width = logo->width;
 	image.height = logo->height;
 
@@ -684,9 +686,8 @@ int fb_prepare_logo(struct fb_info *info, int rotate)
  	}
 
 	height = fb_logo.logo->height;
-#ifdef CONFIG_FB_LOGO_CENTER
-	height += (yres - fb_logo.logo->height) / 2;
-#endif
+	if (fb_center_logo)
+		height += (yres - fb_logo.logo->height) / 2;
 
 	return fb_prepare_extra_logos(info, height, yres);
 }
diff --git a/drivers/video/logo/Kconfig b/drivers/video/logo/Kconfig
index 1e972c4e88b1..d1f6196c8b9a 100644
--- a/drivers/video/logo/Kconfig
+++ b/drivers/video/logo/Kconfig
@@ -10,15 +10,6 @@ menuconfig LOGO
 
 if LOGO
 
-config FB_LOGO_CENTER
-	bool "Center the logo"
-	depends on FB=y
-	help
-	  When this option is selected, the bootup logo is centered both
-	  horizontally and vertically. If more than one logo is displayed
-	  due to multiple CPUs, the collected line of logos is centered
-	  as a whole.
-
 config FB_LOGO_EXTRA
 	bool
 	depends on FB=y
diff --git a/include/linux/fb.h b/include/linux/fb.h
index 7cdd31a69719..f52ef0ad6781 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -653,6 +653,7 @@ extern int fb_new_modelist(struct fb_info *info);
 
 extern struct fb_info *registered_fb[FB_MAX];
 extern int num_registered_fb;
+extern bool fb_center_logo;
 extern struct class *fb_class;
 
 #define for_each_registered_fb(i)		\
-- 
2.11.0