* [PATCH 0/9] Add support for Microsoft Surface System Aggregator Module
@ 2020-11-15 19:21 Maximilian Luz
2020-11-15 19:21 ` [PATCH 7/9] docs: driver-api: Add Surface Aggregator subsystem documentation Maximilian Luz
` (3 more replies)
0 siblings, 4 replies; 10+ messages in thread
From: Maximilian Luz @ 2020-11-15 19:21 UTC (permalink / raw)
To: linux-kernel
Cc: Maximilian Luz, Hans de Goede, Mark Gross, Arnd Bergmann,
Greg Kroah-Hartman, Rob Herring, Jiri Slaby, Rafael J . Wysocki,
Len Brown, Steven Rostedt, Ingo Molnar, Masahiro Yamada,
Michal Marek, Jonathan Corbet, Blaž Hrastnik, Dorian Stoll,
platform-driver-x86, linux-serial, linux-acpi, linux-kbuild,
linux-doc
Hello,
N.B.: the following text is mostly a repeat of cover letter from the
previous RFC for the uninitiated, which can be found at
https://lore.kernel.org/linux-serial/20200923151511.3842150-1-luzmaximilian@gmail.com/
See "Changes" below for an overview of differences between the RFC and
this patchset. I hope I have addressed all comments from that in this
version, thank you again for those.
The Surface System Aggregator Module (we'll refer to it as Surface
Aggregator or SAM below) is an embedded controller (EC) found on various
Microsoft Surface devices. Specifically, all 4th and later generation
Surface devices, i.e. Surface Pro 4, Surface Book 1 and later, with the
exception of the Surface Go series and the Surface Duo. Notably, it
seems like this EC can also be found on the ARM-based Surface Pro X [1].
Functionality provided by this EC depends on the Surface model and can
(roughly) be broken down by their generations: Starting with 5th
generation devices (Surface Pro 2017/5, Surface Book 2, Surface Laptop
1, and later), the EC provides battery and thermal readings, as well as
access to the real-time clock. On 5th and 6th generations, these
features, specifically, are provided via the ACPI interface of the EC,
referred to as Surface ACPI Notify (SAN), i.e. they act as standard ACPI
devices of that type, but require a driver translating requests written
to an ACPI operation region to requests to the EC. On 7th generation
devices, the ACPI interface is (largely) gone, and has been replaced
with custom battery and thermal drivers, directly querying the EC.
Additionally, HID keyboard and touchpad input for Surface models with
these devices built in can be handled via the EC: On the Surface Laptops
1 and 2, this includes only the keyboard, while on the Surface Laptop 3
and Book 3, this includes both touchpad and keyboard. In this case,
actual input is provided as HID data and the EC connection acts as HID
transport, thus requiring a special transport driver for those devices
to work.
Further, all known devices (5th and later generations) also support
changing of performance/cooling modes, which can influence cooling
capabilities of the device (e.g. prefer silent operation over
performance), and may influence power limits (e.g. of the discrete GPU
found on Surface Books).
While this constitutes all major functionality, some more device
specific functionality is also handled by the EC. For example, on the
Surface Books, the EC handles detaching of the clipboard (i.e. the upper
part with screen and CPU) from the base (the lower part with keyboard
and optional discrete GPU) and can influence its behavior (i.e. it
provides an interface via which detachment can be requested, aborted, or
confirmed). It can also be used to detect if there has been a base
attached to the clipboard, and if so what type.
This patch-series adds the basis for supporting this EC and the features
provided by it, by, first, implementing a communication driver providing
a fundamental API for client drivers, handling specific aspects of the
EC. Additionally, it builds on top of that to provide a dedicated bus
and device type to better manage EC clients (and break it down pseudo-
device-wise), especially in the case when these client devices are not
described in ACPI, i.e. cannot be discovered by conventional means.
Furthermore, it provides support for debugging and prototyping via an
optional user-space interface, and, lastly, also support for the
aforementioned ACPI interface, allowing ACPI to communicate with the EC
directly.
This series only addresses 5th and later generation Surface models as
the communication interface has changed substantially from 4th to 5th
generation, and the 4th generation interface has not been reverse-
engineered yet. Specifically, the underlying transport has been changed
from HID feature and input-/output-reports to serial communication via
an UART and a custom protocol. Support for 4th generation devices may be
added in the future, but as currently not much is known about 4th
generation SAM, it yet remains to be seen if this can happen as addition
to this subsystem, or if it will be easier to implement this as separate
platform driver. Especially as the 4th generation EC does not seem to
provide much of the functionality found on 5th and later generations
(e.g. no battery status reporting, no thermal reporting, ..., we assume
it's just clipboard detachment on the Surface Book 1 and performance
mode setting).
In more detail, this series adds a driver for the Surface Serial Hub
(SSH), the 5th- and later-generation communication channel to the EC, a
pseudo-device and driver exposing a misc-device that can be used to
communicate with the EC from user-space, intended for debugging,
testing, and prototyping, as well as a driver for the Surface ACPI
Notify (SAN) device, i.e. the interface between ACPI and EC. Some more
details on those can be found on the individual commit messages.
This series, apart from the SAN and user-space drivers, does not add any
client drivers. This will be handled via future patches once the core
has been accepted (and the other client drivers have been cleaned up a
bit).
On the top level, EC communication via the SSH driver can be broken down
into requests (sent from host to EC), corresponding responses (sent from
EC to host, associated with and triggered by a request), and events
(sent from EC to host without association to a request). The SSH driver
manages all communication (i.e. matches responses to requests, enables
and disables events, and manages event handlers/notifiers installed by
client drivers). On the lower levels, SSH communication is packet-based,
and described in more detail in the documentation added in this series
(specifically ssh.rst).
This set of modules and drivers has been developed out of tree at [2]
and used/tested in the kernel we provide at [3] pretty much since its
beginnings. It has been developed by reverse-engineering the SSH
protocol, mostly through the ACPI interface, communication dumps
obtained from listening in on Windows, and deduction. So things may be
wrong. There have been some attempts at reverse-engineering existing
drivers, which also gave a bit of insight for development, however, I
haven't gotten very far on that front beyond some more higher-level
concepts and detecting a couple of new EC commands/confirming the
functionality of already known commands.
Driver and module names have been chosen to align with Windows driver
names, some field, variable, and concept names have been chosen to align
with ACPI code (or at least with what I think some of the more cryptic
names could mean and make sense in the respective context, e.g. IID ->
Instance ID, TC -> Target Category).
This patch-set can also be found at the following repository and
reference, if you prefer to look at a kernel tree instead of these
emails:
https://github.com/linux-surface/kernel tags/s/surface-aggregator/v1
Thanks,
Max
[1]: The Surface Pro X is, however, currently considered unsupported due
to a lack of test candidates and, as it seems, general lack of
Linux support on other parts. AFAIK there is an issue preventing
serial devices from being registered, on which the core driver in
this series is build on, thus there is no way to even test that at
this point. I'd be happy to work out any issues regarding SAM on
the Pro X at some point in the future, provided someone can/wants
to actually test it.
[2]: https://github.com/linux-surface/surface-aggregator-module
[3]: https://github.com/linux-surface/linux-surface
Note: This patch depends on
[PATCH v4] platform/surface: Create a platform subdirectory for
Microsoft Surface devices
which can be found at
https://lore.kernel.org/platform-driver-x86/20201009141128.683254-1-luzmaximilian@gmail.com/
and is currently in platform-drivers-x86/for-next.
Changes from the previous RFC (overview):
- move to platform/surface
- add copyright lines
- change SPDX identifier to GPL-2.0+ (was GPL-2.0-or-later)
- change user-space interface from debugfs to misc-device
- address issues in user-space interface
- fix typos in commit messages and documentation
- fix some bugs, address other issues
Changes regarding specific patches (and more details) can be found on
the individual patch.
Maximilian Luz (9):
platform/surface: Add Surface Aggregator subsystem
platform/surface: aggregator: Add control packet allocation caching
platform/surface: aggregator: Add event item allocation caching
platform/surface: aggregator: Add trace points
platform/surface: aggregator: Add error injection capabilities
platform/surface: aggregator: Add dedicated bus and device type
docs: driver-api: Add Surface Aggregator subsystem documentation
platform/surface: Add Surface Aggregator user-space interface
platform/surface: Add Surface ACPI Notify driver
Documentation/driver-api/index.rst | 1 +
.../surface_aggregator/client-api.rst | 38 +
.../driver-api/surface_aggregator/client.rst | 394 +++
.../surface_aggregator/clients/cdev.rst | 85 +
.../surface_aggregator/clients/index.rst | 21 +
.../surface_aggregator/clients/san.rst | 44 +
.../driver-api/surface_aggregator/index.rst | 21 +
.../surface_aggregator/internal-api.rst | 67 +
.../surface_aggregator/internal.rst | 50 +
.../surface_aggregator/overview.rst | 76 +
.../driver-api/surface_aggregator/ssh.rst | 343 +++
MAINTAINERS | 13 +
drivers/platform/surface/Kconfig | 39 +
drivers/platform/surface/Makefile | 3 +
drivers/platform/surface/aggregator/Kconfig | 65 +
drivers/platform/surface/aggregator/Makefile | 17 +
drivers/platform/surface/aggregator/bus.c | 424 +++
drivers/platform/surface/aggregator/bus.h | 27 +
.../platform/surface/aggregator/controller.c | 2557 +++++++++++++++++
.../platform/surface/aggregator/controller.h | 288 ++
drivers/platform/surface/aggregator/core.c | 831 ++++++
.../platform/surface/aggregator/ssh_msgb.h | 201 ++
.../surface/aggregator/ssh_packet_layer.c | 2009 +++++++++++++
.../surface/aggregator/ssh_packet_layer.h | 175 ++
.../platform/surface/aggregator/ssh_parser.c | 229 ++
.../platform/surface/aggregator/ssh_parser.h | 157 +
.../surface/aggregator/ssh_request_layer.c | 1254 ++++++++
.../surface/aggregator/ssh_request_layer.h | 142 +
drivers/platform/surface/aggregator/trace.h | 625 ++++
.../platform/surface/surface_acpi_notify.c | 884 ++++++
.../surface/surface_aggregator_cdev.c | 299 ++
include/linux/mod_devicetable.h | 18 +
include/linux/surface_acpi_notify.h | 39 +
include/linux/surface_aggregator/controller.h | 832 ++++++
include/linux/surface_aggregator/device.h | 430 +++
include/linux/surface_aggregator/serial_hub.h | 659 +++++
include/uapi/linux/surface_aggregator/cdev.h | 58 +
scripts/mod/devicetable-offsets.c | 8 +
scripts/mod/file2alias.c | 23 +
39 files changed, 13446 insertions(+)
create mode 100644 Documentation/driver-api/surface_aggregator/client-api.rst
create mode 100644 Documentation/driver-api/surface_aggregator/client.rst
create mode 100644 Documentation/driver-api/surface_aggregator/clients/cdev.rst
create mode 100644 Documentation/driver-api/surface_aggregator/clients/index.rst
create mode 100644 Documentation/driver-api/surface_aggregator/clients/san.rst
create mode 100644 Documentation/driver-api/surface_aggregator/index.rst
create mode 100644 Documentation/driver-api/surface_aggregator/internal-api.rst
create mode 100644 Documentation/driver-api/surface_aggregator/internal.rst
create mode 100644 Documentation/driver-api/surface_aggregator/overview.rst
create mode 100644 Documentation/driver-api/surface_aggregator/ssh.rst
create mode 100644 drivers/platform/surface/aggregator/Kconfig
create mode 100644 drivers/platform/surface/aggregator/Makefile
create mode 100644 drivers/platform/surface/aggregator/bus.c
create mode 100644 drivers/platform/surface/aggregator/bus.h
create mode 100644 drivers/platform/surface/aggregator/controller.c
create mode 100644 drivers/platform/surface/aggregator/controller.h
create mode 100644 drivers/platform/surface/aggregator/core.c
create mode 100644 drivers/platform/surface/aggregator/ssh_msgb.h
create mode 100644 drivers/platform/surface/aggregator/ssh_packet_layer.c
create mode 100644 drivers/platform/surface/aggregator/ssh_packet_layer.h
create mode 100644 drivers/platform/surface/aggregator/ssh_parser.c
create mode 100644 drivers/platform/surface/aggregator/ssh_parser.h
create mode 100644 drivers/platform/surface/aggregator/ssh_request_layer.c
create mode 100644 drivers/platform/surface/aggregator/ssh_request_layer.h
create mode 100644 drivers/platform/surface/aggregator/trace.h
create mode 100644 drivers/platform/surface/surface_acpi_notify.c
create mode 100644 drivers/platform/surface/surface_aggregator_cdev.c
create mode 100644 include/linux/surface_acpi_notify.h
create mode 100644 include/linux/surface_aggregator/controller.h
create mode 100644 include/linux/surface_aggregator/device.h
create mode 100644 include/linux/surface_aggregator/serial_hub.h
create mode 100644 include/uapi/linux/surface_aggregator/cdev.h
--
2.29.2
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 7/9] docs: driver-api: Add Surface Aggregator subsystem documentation
2020-11-15 19:21 [PATCH 0/9] Add support for Microsoft Surface System Aggregator Module Maximilian Luz
@ 2020-11-15 19:21 ` Maximilian Luz
2020-11-15 19:21 ` [PATCH 8/9] platform/surface: Add Surface Aggregator user-space interface Maximilian Luz
` (2 subsequent siblings)
3 siblings, 0 replies; 10+ messages in thread
From: Maximilian Luz @ 2020-11-15 19:21 UTC (permalink / raw)
To: linux-kernel
Cc: Maximilian Luz, Hans de Goede, Mark Gross, Arnd Bergmann,
Greg Kroah-Hartman, Jonathan Corbet, Blaž Hrastnik,
Dorian Stoll, platform-driver-x86, linux-doc
Add documentation for the Surface Aggregator subsystem and its client
drivers, giving an overview of the subsystem, its use-cases, its
internal structure and internal API, as well as its external API for
writing client drivers.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
---
Changes from RFC:
- change SPDX identifier to GPL-2.0+ (was GPL-2.0-or-later)
- fix typos
---
Documentation/driver-api/index.rst | 1 +
.../surface_aggregator/client-api.rst | 38 ++
.../driver-api/surface_aggregator/client.rst | 394 ++++++++++++++++++
.../surface_aggregator/clients/index.rst | 10 +
.../driver-api/surface_aggregator/index.rst | 21 +
.../surface_aggregator/internal-api.rst | 67 +++
.../surface_aggregator/internal.rst | 50 +++
.../surface_aggregator/overview.rst | 76 ++++
.../driver-api/surface_aggregator/ssh.rst | 343 +++++++++++++++
MAINTAINERS | 1 +
10 files changed, 1001 insertions(+)
create mode 100644 Documentation/driver-api/surface_aggregator/client-api.rst
create mode 100644 Documentation/driver-api/surface_aggregator/client.rst
create mode 100644 Documentation/driver-api/surface_aggregator/clients/index.rst
create mode 100644 Documentation/driver-api/surface_aggregator/index.rst
create mode 100644 Documentation/driver-api/surface_aggregator/internal-api.rst
create mode 100644 Documentation/driver-api/surface_aggregator/internal.rst
create mode 100644 Documentation/driver-api/surface_aggregator/overview.rst
create mode 100644 Documentation/driver-api/surface_aggregator/ssh.rst
diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst
index f357f3eb400c..699dc7cac0fb 100644
--- a/Documentation/driver-api/index.rst
+++ b/Documentation/driver-api/index.rst
@@ -97,6 +97,7 @@ available subsections can be seen below.
rfkill
serial/index
sm501
+ surface_aggregator/index
switchtec
sync_file
vfio-mediated-device
diff --git a/Documentation/driver-api/surface_aggregator/client-api.rst b/Documentation/driver-api/surface_aggregator/client-api.rst
new file mode 100644
index 000000000000..8e0b000d0e64
--- /dev/null
+++ b/Documentation/driver-api/surface_aggregator/client-api.rst
@@ -0,0 +1,38 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+===============================
+Client Driver API Documentation
+===============================
+
+.. contents::
+ :depth: 2
+
+
+Serial Hub Communication
+========================
+
+.. kernel-doc:: include/linux/surface_aggregator/serial_hub.h
+
+.. kernel-doc:: drivers/platform/surface/aggregator/ssh_packet_layer.c
+ :export:
+
+
+Controller and Core Interface
+=============================
+
+.. kernel-doc:: include/linux/surface_aggregator/controller.h
+
+.. kernel-doc:: drivers/platform/surface/aggregator/controller.c
+ :export:
+
+.. kernel-doc:: drivers/platform/surface/aggregator/core.c
+ :export:
+
+
+Client Bus and Client Device API
+================================
+
+.. kernel-doc:: include/linux/surface_aggregator/device.h
+
+.. kernel-doc:: drivers/platform/surface/aggregator/bus.c
+ :export:
diff --git a/Documentation/driver-api/surface_aggregator/client.rst b/Documentation/driver-api/surface_aggregator/client.rst
new file mode 100644
index 000000000000..0331b66896c6
--- /dev/null
+++ b/Documentation/driver-api/surface_aggregator/client.rst
@@ -0,0 +1,394 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+.. |ssam_controller| replace:: :c:type:`struct ssam_controller <ssam_controller>`
+.. |ssam_device| replace:: :c:type:`struct ssam_device <ssam_device>`
+.. |ssam_device_driver| replace:: :c:type:`struct ssam_device_driver <ssam_device_driver>`
+.. |ssam_client_bind| replace:: :c:func:`ssam_client_bind`
+.. |ssam_client_link| replace:: :c:func:`ssam_client_link`
+.. |ssam_get_controller| replace:: :c:func:`ssam_get_controller`
+.. |ssam_controller_get| replace:: :c:func:`ssam_controller_get`
+.. |ssam_controller_put| replace:: :c:func:`ssam_controller_put`
+.. |ssam_device_alloc| replace:: :c:func:`ssam_device_alloc`
+.. |ssam_device_add| replace:: :c:func:`ssam_device_add`
+.. |ssam_device_remove| replace:: :c:func:`ssam_device_remove`
+.. |ssam_device_driver_register| replace:: :c:func:`ssam_device_driver_register`
+.. |ssam_device_driver_unregister| replace:: :c:func:`ssam_device_driver_unregister`
+.. |module_ssam_device_driver| replace:: :c:func:`module_ssam_device_driver`
+.. |SSAM_DEVICE| replace:: :c:func:`SSAM_DEVICE`
+.. |ssam_notifier_register| replace:: :c:func:`ssam_notifier_register`
+.. |ssam_notifier_unregister| replace:: :c:func:`ssam_notifier_unregister`
+.. |ssam_request_sync| replace:: :c:func:`ssam_request_sync`
+.. |ssam_event_mask| replace:: :c:type:`enum ssam_event_mask <ssam_event_mask>`
+
+
+======================
+Writing Client Drivers
+======================
+
+For the API documentation, refer to:
+
+.. toctree::
+ :maxdepth: 2
+
+ client-api
+
+
+Overview
+========
+
+Client drivers can be set up in two main ways, depending on how the
+corresponding device is made available to the system. We specifically
+differentiate between devices that are presented to the system via one of
+the conventional ways, e.g. as platform devices via ACPI, and devices that
+are non-discoverable and instead need to be explicitly provided by some
+other mechanism, as discussed further below.
+
+
+Non-SSAM Client Drivers
+=======================
+
+All communication with the SAM EC is handled via the |ssam_controller|
+representing that EC to the kernel. Drivers targeting a non-SSAM device (and
+thus not being a |ssam_device_driver|) need to explicitly establish a
+connection/relation to that controller. This can be done via the
+|ssam_client_bind| function. Said function returns a reference to the SSAM
+controller, but, more importantly, also establishes a device link between
+client device and controller (this can also be done separate via
+|ssam_client_link|). It is important to do this, as it, first, guarantees
+that the returned controller is valid for use in the client driver for as
+long as this driver is bound to its device, i.e. that the driver gets
+unbound before the controller ever becomes invalid, and, second, as it
+ensures correct suspend/resume ordering. This setup should be done in the
+driver's probe function, and may be used to defer probing in case the SSAM
+subsystem is not ready yet, for example:
+
+.. code-block:: c
+
+ static int client_driver_probe(struct platform_device *pdev)
+ {
+ struct ssam_controller *ctrl;
+ int status;
+
+ status = ssam_client_bind(&pdev->dev, &ctrl);
+ if (status)
+ return status == -ENXIO ? -EPROBE_DEFER : status;
+
+ // ...
+
+ return 0;
+ }
+
+The controller may be separately obtained via |ssam_get_controller| and its
+lifetime be guaranteed via |ssam_controller_get| and |ssam_controller_put|.
+Note that none of these functions, however, guarantee that the controller
+will not be shut down or suspended. These functions essentially only operate
+on the reference, i.e. only guarantee a bare minimum of accessibility
+without any guarantees at all on practical operability.
+
+
+Adding SSAM Devices
+===================
+
+If a device does not already exist/is not already provided via conventional
+means, it should be provided as |ssam_device| via the SSAM client device
+hub. New devices can be added to this hub by entering their UID into the
+corresponding registry. SSAM devices can also be manually allocated via
+|ssam_device_alloc|, subsequently to which they have to be added via
+|ssam_device_add| and eventually removed via |ssam_device_remove|. By
+default, the parent of the device is set to the controller device provided
+for allocation, however this may be changed before the device is added. Note
+that, when changing the parent device, care must be taken to ensure that the
+controller lifetime and suspend/resume ordering guarantees, in the default
+setup provided through the parent-child relation, are preserved. If
+necessary, by use of |ssam_client_link| as is done for non-SSAM client
+drivers and described in more detail above.
+
+A client device must always be removed by the party which added the
+respective device before the controller shuts down. Such removal can be
+guaranteed by linking the driver providing the SSAM device to the controller
+via |ssam_client_link|, causing it to unbind before the controller driver
+unbinds. Client devices registered with the controller as parent are
+automatically removed when the controller shuts down, but this should not be
+relied upon, especially as this does not extend to client devices with a
+different parent.
+
+
+SSAM Client Drivers
+===================
+
+SSAM client device drivers are, in essence, no different than other device
+driver types. They are represented via |ssam_device_driver| and bind to a
+|ssam_device| via its UID (:c:type:`struct ssam_device.uid <ssam_device>`)
+member and the match table
+(:c:type:`struct ssam_device_driver.match_table <ssam_device_driver>`),
+which should be set when declaring the driver struct instance. Refer to the
+|SSAM_DEVICE| macro documentation for more details on how to define members
+of the driver's match table.
+
+The UID for SSAM client devices consists of a ``domain``, a ``category``,
+a ``target``, an ``instance``, and a ``function``. The ``domain`` is used
+differentiate between physical SAM devices
+(:c:type:`SSAM_DOMAIN_SERIALHUB <ssam_device_domain>`), i.e. devices that can
+be accessed via the Surface Serial Hub, and virtual ones
+(:c:type:`SSAM_DOMAIN_VIRTUAL <ssam_device_domain>`), such as client-device
+hubs, that have no real representation on the SAM EC and are solely used on
+the kernel/driver-side. For physical devices, ``category`` represents the
+target category, ``target`` the target ID, and ``instance`` the instance ID
+used to access the physical SAM device. In addition, ``function`` references
+a specific device functionality, but has no meaning to the SAM EC. The
+(default) name of a client device is generated based on its UID.
+
+A driver instance can be registered via |ssam_device_driver_register| and
+unregistered via |ssam_device_driver_unregister|. For convenience, the
+|module_ssam_device_driver| macro may be used to define module init- and
+exit-functions registering the driver.
+
+The controller associated with a SSAM client device can be found in its
+:c:type:`struct ssam_device.ctrl <ssam_device>` member. This reference is
+guaranteed to be valid for at least as long as the client driver is bound,
+but should also be valid for as long as the client device exists. Note,
+however, that access outside of the bound client driver must ensure that the
+controller device is not suspended while making any requests or
+(un)registering event notifiers (and thus should generally be avoided). This
+is guaranteed when the controller is accessed from inside the bound client
+driver.
+
+
+Making Synchronous Requests
+===========================
+
+Synchronous requests are (currently) the main form of host-initiated
+communication with the EC. There are a couple of ways to define and execute
+such requests, however, most of them boil down to something similar as shown
+in the example below. This example defines a write-read request, meaning
+that the caller provides an argument to the SAM EC and receives a response.
+The caller needs to know the (maximum) length of the response payload and
+provide a buffer for it.
+
+Care must be taken to ensure that any command payload data passed to the SAM
+EC is provided in little-endian format and, similarly, any response payload
+data received from it is converted from little-endian to host endianness.
+
+.. code-block:: c
+
+ int perform_request(struct ssam_controller *ctrl, u32 arg, u32 *ret)
+ {
+ struct ssam_request rqst;
+ struct ssam_response resp;
+ int status;
+
+ /* Convert request argument to little-endian. */
+ __le32 arg_le = cpu_to_le32(arg);
+ __le32 ret_le = cpu_to_le32(0);
+
+ /*
+ * Initialize request specification. Replace this with your values.
+ * The rqst.payload field may be NULL if rqst.length is zero,
+ * indicating that the request does not have any argument.
+ *
+ * Note: The request parameters used here are not valid, i.e.
+ * they do not correspond to an actual SAM/EC request.
+ */
+ rqst.target_category = SSAM_SSH_TC_SAM;
+ rqst.target_id = 0x01;
+ rqst.command_id = 0x02;
+ rqst.instance_id = 0x03;
+ rqst.flags = SSAM_REQUEST_HAS_RESPONSE;
+ rqst.length = sizeof(arg_le);
+ rqst.payload = (u8 *)&arg_le;
+
+ /* Initialize request response. */
+ resp.capacity = sizeof(ret_le);
+ resp.length = 0;
+ resp.pointer = (u8 *)&ret_le;
+
+ /*
+ * Perform actual request. The response pointer may be null in case
+ * the request does not have any response. This must be consistent
+ * with the SSAM_REQUEST_HAS_RESPONSE flag set in the specification
+ * above.
+ */
+ status = ssam_request_sync(ctrl, &rqst, &resp);
+ if (status)
+ return status;
+
+ /*
+ * Alternatively use
+ *
+ * ssam_request_sync_onstack(ctrl, &rqst, &resp, sizeof(arg_le));
+ *
+ * to perform the request, allocating the message buffer directly
+ * on the stack as opposed to via kzalloc().
+ */
+
+ /*
+ * Convert request response back to native format. Note that in the
+ * error case, this value is not touched.
+ */
+ *ret = le32_to_cpu(ret_le);
+
+ return status;
+ }
+
+Note that |ssam_request_sync| in its essence is a wrapper over lower-level
+request primitives, which may also be used to perform requests. Refer to its
+implementation and documentation for more details.
+
+An arguably more user-friendly way of defining such functions is by using
+one of the generator macros, for example via:
+
+.. code-block:: c
+
+ SSAM_DEFINE_SYNC_REQUEST_W(__ssam_tmp_perf_mode_set, __le32, {
+ .target_category = SSAM_SSH_TC_TMP,
+ .target_id = 0x01,
+ .command_id = 0x03,
+ .instance_id = 0x00,
+ });
+
+This example defines a function
+
+.. code-block:: c
+
+ int __ssam_tmp_perf_mode_set(struct ssam_controller *ctrl, const __le32 *arg);
+
+executing the specified request, with the controller passed in when calling
+said function. In this example, the argument is provided via the ``arg``
+pointer. Note that the generated function allocates the message buffer on
+the stack. Thus, if the argument provided via the request is large, these
+kinds of macros should be avoided. Also note that, in contrast to the
+previous non-macro example, this function does not do any endianness
+conversion, which has to be handled by the caller. Apart from those
+differences the function generated by the macro is similar to the one
+provided in the non-macro example above.
+
+The full list of such function-generating macros is
+
+- :c:func:`SSAM_DEFINE_SYNC_REQUEST_N` for requests without return value and
+ without argument.
+- :c:func:`SSAM_DEFINE_SYNC_REQUEST_R` for requests with return value but no
+ argument.
+- :c:func:`SSAM_DEFINE_SYNC_REQUEST_W` for requests without return value but
+ with argument.
+
+Refer to their respective documentation for more details. For each one of
+these macros, a special variant is provided, which targets request types
+applicable to multiple instances of the same device type:
+
+- :c:func:`SSAM_DEFINE_SYNC_REQUEST_MD_N`
+- :c:func:`SSAM_DEFINE_SYNC_REQUEST_MD_R`
+- :c:func:`SSAM_DEFINE_SYNC_REQUEST_MD_W`
+
+The difference of those macros to the previously mentioned versions is, that
+the device target and instance IDs are not fixed for the generated function,
+but instead have to be provided by the caller of said function.
+
+Additionally, variants for direct use with client devices, i.e.
+|ssam_device|, are also provided. These can, for example, be used as
+follows:
+
+.. code-block:: c
+
+ SSAM_DEFINE_SYNC_REQUEST_CL_R(ssam_bat_get_sta, __le32, {
+ .target_category = SSAM_SSH_TC_BAT,
+ .command_id = 0x01,
+ });
+
+This invocation of the macro defines a function
+
+.. code-block:: c
+
+ int ssam_bat_get_sta(struct ssam_device *sdev, __le32 *ret);
+
+executing the specified request, using the device IDs and controller given
+in the client device. The full list of such macros for client devices is:
+
+- :c:func:`SSAM_DEFINE_SYNC_REQUEST_CL_N`
+- :c:func:`SSAM_DEFINE_SYNC_REQUEST_CL_R`
+- :c:func:`SSAM_DEFINE_SYNC_REQUEST_CL_W`
+
+
+Handling Events
+===============
+
+To receive events from the SAM EC, an event notifier must be registered for
+the desired event via |ssam_notifier_register|. The notifier must be
+unregistered via |ssam_notifier_unregister| once it is not required any
+more.
+
+Event notifiers are registered by providing (at minimum) a callback to call
+in case an event has been received, the registry specifying how the event
+should be enabled, an event ID specifying for which target category and,
+optionally and depending on the registry used, for which instance ID events
+should be enabled, and finally, flags describing how the EC will send these
+events. Additionally, a priority for the respective notifier may be
+specified, which determines its order in relation to any other notifier
+registered for the same target category.
+
+By default, event notifiers will receive all events for the specific target
+category, regardless of the instance ID specified when registering the
+notifier. The core may be instructed to only call a notifier if the target
+ID or instance ID (or both) of the event match the ones implied by the
+notifier IDs (in case of target ID, the target ID of the registry), by
+providing an event mask (see |ssam_event_mask|).
+
+In general, the target ID of the registry is also the target ID of the
+enabled event (with the notable exception being keyboard input events on the
+Surface Laptop 1 and 2, which are enabled via a registry with target ID 1,
+but provide events with target ID 2).
+
+A full example for registering an event notifier and handling received
+events is provided below:
+
+.. code-block:: c
+
+ u32 notifier_callback(struct ssam_event_notifier *nf,
+ const struct ssam_event *event)
+ {
+ int status = ...
+
+ /* Handle the event here ... */
+
+ /* Convert return value and indicate that we handled the event. */
+ return ssam_notifier_from_errno(status) | SSAM_NOTIF_HANDLED;
+ }
+
+ int setup_notifier(struct ssam_device *sdev,
+ struct ssam_event_notifier *nf)
+ {
+ /* Set priority wrt. other handlers of same target category. */
+ nf->base.priority = 1;
+
+ /* Set event/notifier callback. */
+ nf->base.fn = notifier_callback;
+
+ /* Specify event registry, i.e. how events get enabled/disabled. */
+ nf->event.reg = SSAM_EVENT_REGISTRY_KIP;
+
+ /* Specify which event to enable/disable */
+ nf->event.id.target_category = sdev->uid.category;
+ nf->event.id.instance = sdev->uid.instance;
+
+ /*
+ * Specify for which events the notifier callback gets executed.
+ * This essentially tells the core if it can skip notifiers that
+ * don't have target or instance IDs matching those of the event.
+ */
+ nf->event.mask = SSAM_EVENT_MASK_STRICT;
+
+ /* Specify event flags. */
+ nf->event.flags = SSAM_EVENT_SEQUENCED;
+
+ return ssam_notifier_register(sdev->ctrl, nf);
+ }
+
+Multiple event notifiers can be registered for the same event. The event
+handler core takes care of enabling and disabling events when notifiers are
+registered and unregistered, by keeping track of how many notifiers for a
+specific event (combination of registry, event target category, and event
+instance ID) are currently registered. This means that a specific event will
+be enabled when the first notifier for it is being registered and disabled
+when the last notifier for it is being unregistered. Note that the event
+flags are therefore only used on the first registered notifier, however, one
+should take care that notifiers for a specific event are always registered
+with the same flag and it is considered a bug to do otherwise.
diff --git a/Documentation/driver-api/surface_aggregator/clients/index.rst b/Documentation/driver-api/surface_aggregator/clients/index.rst
new file mode 100644
index 000000000000..31e026d96102
--- /dev/null
+++ b/Documentation/driver-api/surface_aggregator/clients/index.rst
@@ -0,0 +1,10 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+===========================
+Client Driver Documentation
+===========================
+
+This is the documentation for client drivers themselves. Refer to
+:doc:`../client` for documentation on how to write client drivers.
+
+.. Place documentation for individual client drivers here.
diff --git a/Documentation/driver-api/surface_aggregator/index.rst b/Documentation/driver-api/surface_aggregator/index.rst
new file mode 100644
index 000000000000..9fa70eedca59
--- /dev/null
+++ b/Documentation/driver-api/surface_aggregator/index.rst
@@ -0,0 +1,21 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+=======================================
+Surface System Aggregator Module (SSAM)
+=======================================
+
+.. toctree::
+ :maxdepth: 2
+
+ overview
+ ssh
+ client
+ internal
+ clients/index
+
+.. only:: subproject and html
+
+ Indices
+ =======
+
+ * :ref:`genindex`
diff --git a/Documentation/driver-api/surface_aggregator/internal-api.rst b/Documentation/driver-api/surface_aggregator/internal-api.rst
new file mode 100644
index 000000000000..639a67b5a392
--- /dev/null
+++ b/Documentation/driver-api/surface_aggregator/internal-api.rst
@@ -0,0 +1,67 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+==========================
+Internal API Documentation
+==========================
+
+.. contents::
+ :depth: 2
+
+
+Packet Transport Layer
+======================
+
+.. kernel-doc:: drivers/platform/surface/aggregator/ssh_parser.h
+ :internal:
+
+.. kernel-doc:: drivers/platform/surface/aggregator/ssh_parser.c
+ :internal:
+
+.. kernel-doc:: drivers/platform/surface/aggregator/ssh_msgb.h
+ :internal:
+
+.. kernel-doc:: drivers/platform/surface/aggregator/ssh_packet_layer.h
+ :internal:
+
+.. kernel-doc:: drivers/platform/surface/aggregator/ssh_packet_layer.c
+ :internal:
+
+
+Request Transport Layer
+=======================
+
+.. kernel-doc:: drivers/platform/surface/aggregator/ssh_request_layer.h
+ :internal:
+
+.. kernel-doc:: drivers/platform/surface/aggregator/ssh_request_layer.c
+ :internal:
+
+
+Controller
+==========
+
+.. kernel-doc:: drivers/platform/surface/aggregator/controller.h
+ :internal:
+
+.. kernel-doc:: drivers/platform/surface/aggregator/controller.c
+ :internal:
+
+
+Client Device Bus
+=================
+
+.. kernel-doc:: drivers/platform/surface/aggregator/bus.c
+ :internal:
+
+
+Core
+====
+
+.. kernel-doc:: drivers/platform/surface/aggregator/core.c
+ :internal:
+
+
+Trace Helpers
+=============
+
+.. kernel-doc:: drivers/platform/surface/aggregator/trace.h
diff --git a/Documentation/driver-api/surface_aggregator/internal.rst b/Documentation/driver-api/surface_aggregator/internal.rst
new file mode 100644
index 000000000000..9737ecd2e9f9
--- /dev/null
+++ b/Documentation/driver-api/surface_aggregator/internal.rst
@@ -0,0 +1,50 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+=====================
+Core Driver Internals
+=====================
+
+For the API documentation, refer to:
+
+.. toctree::
+ :maxdepth: 2
+
+ internal-api
+
+
+Overview
+========
+
+The SSAM core implementation is structured in layers, somewhat following the
+SSH protocol structure:
+
+Lower-level packet transport is implemented in the *packet transport layer
+(PTL)*, directly building on top of the serial device (serdev)
+infrastructure of the kernel. As the name indicates, this layer deals with
+the packet transport logic and handles things like packet validation, packet
+acknowledgment (ACKing), packet (retransmission) timeouts, and relaying
+packet payloads to higher-level layers.
+
+Above this sits the *request transport layer (RTL)*. This layer is centered
+around command-type packet payloads, i.e. requests (sent from host to EC),
+responses of the EC to those requests, and events (sent from EC to host).
+It, specifically, distinguishes events from request responses, matches
+responses to their corresponding requests, and implements request timeouts.
+
+The *controller* layer is building on top of this and essentially decides
+how request responses and, especially, events are dealt with. It provides an
+event notifier system, handles event activation/deactivation, provides a
+workqueue for event and asynchronous request completion, and also manages
+the message counters required for building command messages (``SEQ``,
+``RQID``). This layer basically provides a fundamental interface to the SAM
+EC for use in other kernel drivers.
+
+While the controller layer already provides an interface for other kernel
+drivers, the client *bus* extends this interface to provide support for
+native SSAM devices, i.e. devices that are not defined in ACPI and not
+implemented as platform devices, via :c:type:`struct ssam_device <ssam_device>`
+and :c:type:`struct ssam_device_driver <ssam_device_driver>`. This aims to
+simplify management of client devices and client drivers.
+
+Refer to :doc:`client` for documentation regarding the client device/driver
+API and interface options for other kernel drivers.
diff --git a/Documentation/driver-api/surface_aggregator/overview.rst b/Documentation/driver-api/surface_aggregator/overview.rst
new file mode 100644
index 000000000000..b4ef7e25748c
--- /dev/null
+++ b/Documentation/driver-api/surface_aggregator/overview.rst
@@ -0,0 +1,76 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+========
+Overview
+========
+
+The Surface/System Aggregator Module (SAM, SSAM) is an (arguably *the*)
+embedded controller (EC) on Microsoft Surface devices. It has been originally
+introduced on 4th generation devices (Surface Pro 4, Surface Book 1), but
+its responsibilities and feature-set have since been expanded significantly
+with the following generations.
+
+
+Features and Integration
+========================
+
+Not much is currently known about SAM on 4th generation devices (Surface Pro
+4, Surface Book 1), due to the use of a different communication interface
+between host and EC (as detailed below). On 5th (Surface Pro 2017, Surface
+Book 2, Surface Laptop 1) and later generation devices, SAM is responsible
+for providing battery information (both current status and static values,
+such as maximum capacity etc.), as well as an assortment of temperature
+sensors (e.g. skin temperature) and cooling/performance-mode setting to the
+host. On the Surface Book 2, specifically, it additionally provides an
+interface for properly handling clipboard detachment (i.e. separating the
+display part from the keyboard part of the device), on the Surface Laptop 1
+and 2 it is required for keyboard HID input. This HID subsystem has been
+restructured for 7th generation devices and on those, specifically Surface
+Laptop 3 and Surface Book 3, is responsible for all major HID input (i.e.
+keyboard and touchpad).
+
+While the features have not changed much on a coarse level since the 5th
+generation, internal interfaces have undergone some rather large changes. On
+5th and 6th generation devices, both battery and temperature information is
+exposed to ACPI via a shim driver (referred to as Surface ACPI Notify, or
+SAN), translating ACPI generic serial bus write-/read-accesses to SAM
+requests. On 7th generation devices, this additional layer is gone and these
+devices require a driver hooking directly into the SAM interface. Equally,
+on newer generations, less devices are declared in ACPI, making them a bit
+harder to discover and requiring us to hard-code a sort of device registry.
+Due to this, a SSAM bus and subsystem with client devices
+(:c:type:`struct ssam_device <ssam_device>`) has been implemented.
+
+
+Communication
+=============
+
+The type of communication interface between host and EC depends on the
+generation of the Surface device. On 4th generation devices, host and EC
+communicate via HID, specifically using a HID-over-I2C device, whereas on
+5th and later generations, communication takes place via a USART serial
+device. In accordance to the drivers found on other operating systems, we
+refer to the serial device and its driver as Surface Serial Hub (SSH) and
+when needed to differentiate between both types of SAM as SAM-over-SSH, in
+contrast to SAM-over-HID for the former variant.
+
+Currently, this subsystem only supports SAM-over-SSH. The SSH communication
+interface is described in more detail below. The HID interface has not been
+reverse engineered yet and it is, at the moment, unclear how many (and
+which) concepts of the SSH interface detailed below can be transferred to
+it.
+
+Surface Serial Hub
+------------------
+
+As already elaborated above, the Surface Serial Hub (SSH) is the
+communication interface for SAM on 5th- and all later-generation Surface
+devices. On the highest level, communication can be separated into two main
+types: Requests, messages sent from host to EC that may trigger a direct
+response from the EC (explicitly associated with the request), and events
+(sometimes also referred to as notifications), sent from EC to host without
+being a direct response to a previous request. We may also refer to requests
+without response as commands. In general, events need to be enabled via one
+of multiple dedicated commands before they are sent by the EC.
+
+See :doc:`ssh` for a more technical protocol documentation.
diff --git a/Documentation/driver-api/surface_aggregator/ssh.rst b/Documentation/driver-api/surface_aggregator/ssh.rst
new file mode 100644
index 000000000000..59b3e0729116
--- /dev/null
+++ b/Documentation/driver-api/surface_aggregator/ssh.rst
@@ -0,0 +1,343 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+.. |u8| replace:: :c:type:`u8 <u8>`
+.. |u16| replace:: :c:type:`u16 <u16>`
+.. |TYPE| replace:: ``TYPE``
+.. |LEN| replace:: ``LEN``
+.. |SEQ| replace:: ``SEQ``
+.. |SYN| replace:: ``SYN``
+.. |NAK| replace:: ``NAK``
+.. |ACK| replace:: ``ACK``
+.. |DATA| replace:: ``DATA``
+.. |DATA_SEQ| replace:: ``DATA_SEQ``
+.. |DATA_NSQ| replace:: ``DATA_NSQ``
+.. |TC| replace:: ``TC``
+.. |TID| replace:: ``TID``
+.. |IID| replace:: ``IID``
+.. |RQID| replace:: ``RQID``
+.. |CID| replace:: ``CID``
+
+===========================
+Surface Serial Hub Protocol
+===========================
+
+The Surface Serial Hub (SSH) is the central communication interface for the
+embedded Surface Aggregator Module controller (SAM or EC) on newer Surface
+generations. We will refer to this protocol and interface as SAM-over-SSH,
+as opposed to SAM-over-HID for the older generations.
+
+On Surface devices with SAM-over-SSH, SAM is connected to the host via UART
+and defined in ACPI as device with ID ``MSHW0084``. On these devices,
+significant functionality is provided via SAM, including access to battery
+and power information and events, thermal read-outs and events, and many
+more. For Surface Laptops, keyboard input is handled via HID directed
+through SAM, on the Surface Laptop 3 and Surface Book 3 this also includes
+touchpad input.
+
+Note that the standard disclaimer for this subsystem also applies to this
+document: All of this has been reverse-engineered and may thus be erroneous
+and/or incomplete.
+
+All CRCs used in the following are two-byte ``crc_ccitt_false(0xffff, ...)``.
+All multi-byte values are little-endian, there is no implicit padding between
+values.
+
+
+SSH Packet Protocol: Definitions
+================================
+
+The fundamental communication unit of the SSH protocol is a frame
+(:c:type:`struct ssh_frame <ssh_frame>`). A frame consists of the following
+fields, packed together and in order:
+
+.. flat-table:: SSH Frame
+ :widths: 1 1 4
+ :header-rows: 1
+
+ * - Field
+ - Type
+ - Description
+
+ * - |TYPE|
+ - |u8|
+ - Type identifier of the frame.
+
+ * - |LEN|
+ - |u16|
+ - Length of the payload associated with the frame.
+
+ * - |SEQ|
+ - |u8|
+ - Sequence ID (see explanation below).
+
+Each frame structure is followed by a CRC over this structure. The CRC over
+the frame structure (|TYPE|, |LEN|, and |SEQ| fields) is placed directly
+after the frame structure and before the payload. The payload is followed by
+its own CRC (over all payload bytes). If the payload is not present (i.e.
+the frame has ``LEN=0``), the CRC of the payload is still present and will
+evaluate to ``0xffff``. The |LEN| field does not include any of the CRCs, it
+equals the number of bytes inbetween the CRC of the frame and the CRC of the
+payload.
+
+Additionally, the following fixed two-byte sequences are used:
+
+.. flat-table:: SSH Byte Sequences
+ :widths: 1 1 4
+ :header-rows: 1
+
+ * - Name
+ - Value
+ - Description
+
+ * - |SYN|
+ - ``[0xAA, 0x55]``
+ - Synchronization bytes.
+
+A message consists of |SYN|, followed by the frame (|TYPE|, |LEN|, |SEQ| and
+CRC) and, if specified in the frame (i.e. ``LEN > 0``), payload bytes,
+followed finally, regardless if the payload is present, the payload CRC. The
+messages corresponding to an exchange are, in part, identified by having the
+same sequence ID (|SEQ|), stored inside the frame (more on this in the next
+section). The sequence ID is a wrapping counter.
+
+A frame can have the following types
+(:c:type:`enum ssh_frame_type <ssh_frame_type>`):
+
+.. flat-table:: SSH Frame Types
+ :widths: 1 1 4
+ :header-rows: 1
+
+ * - Name
+ - Value
+ - Short Description
+
+ * - |NAK|
+ - ``0x04``
+ - Sent on error in previously received message.
+
+ * - |ACK|
+ - ``0x40``
+ - Sent to acknowledge receival of |DATA| frame.
+
+ * - |DATA_SEQ|
+ - ``0x80``
+ - Sent to transfer data. Sequenced.
+
+ * - |DATA_NSQ|
+ - ``0x00``
+ - Same as |DATA_SEQ|, but does not need to be ACKed.
+
+Both |NAK|- and |ACK|-type frames are used to control flow of messages and
+thus do not carry a payload. |DATA_SEQ|- and |DATA_NSQ|-type frames on the
+other hand must carry a payload. The flow sequence and interaction of
+different frame types will be described in more depth in the next section.
+
+
+SSH Packet Protocol: Flow Sequence
+==================================
+
+Each exchange begins with |SYN|, followed by a |DATA_SEQ|- or
+|DATA_NSQ|-type frame, followed by its CRC, payload, and payload CRC. In
+case of a |DATA_NSQ|-type frame, the exchange is then finished. In case of a
+|DATA_SEQ|-type frame, the receiving party has to acknowledge receival of
+the frame by responding with a message containing an |ACK|-type frame with
+the same sequence ID of the |DATA| frame. In other words, the sequence ID of
+the |ACK| frame specifies the |DATA| frame to be acknowledged. In case of an
+error, e.g. an invalid CRC, the receiving party responds with a message
+containing an |NAK|-type frame. As the sequence ID of the previous data
+frame, for which an error is indicated via the |NAK| frame, cannot be relied
+upon, the sequence ID of the |NAK| frame should not be used and is set to
+zero. After receival of an |NAK| frame, the sending party should re-send all
+outstanding (non-ACKed) messages.
+
+Sequence IDs are not synchronized between the two parties, meaning that they
+are managed independently for each party. Identifying the messages
+corresponding to a single exchange thus relies on the sequence ID as well as
+the type of the message, and the context. Specifically, the sequence ID is
+used to associate an ``ACK`` with its ``DATA_SEQ``-type frame, but not
+``DATA_SEQ``- or ``DATA_NSQ``-type frames with other ``DATA``- type frames.
+
+An example exchange might look like this:
+
+::
+
+ tx: -- SYN FRAME(D) CRC(F) PAYLOAD CRC(P) -----------------------------
+ rx: ------------------------------------- SYN FRAME(A) CRC(F) CRC(P) --
+
+where both frames have the same sequence ID (``SEQ``). Here, ``FRAME(D)``
+indicates a |DATA_SEQ|-type frame, ``FRAME(A)`` an ``ACK``-type frame,
+``CRC(F)`` the CRC over the previous frame, ``CRC(P)`` the CRC over the
+previous payload. In case of an error, the exchange would look like this:
+
+::
+
+ tx: -- SYN FRAME(D) CRC(F) PAYLOAD CRC(P) -----------------------------
+ rx: ------------------------------------- SYN FRAME(N) CRC(F) CRC(P) --
+
+upon which the sender should re-send the message. ``FRAME(N)`` indicates an
+|NAK|-type frame. Note that the sequence ID of the |NAK|-type frame is fixed
+to zero. For |DATA_NSQ|-type frames, both exchanges are the same:
+
+::
+
+ tx: -- SYN FRAME(DATA_NSQ) CRC(F) PAYLOAD CRC(P) ----------------------
+ rx: -------------------------------------------------------------------
+
+Here, an error can be detected, but not corrected or indicated to the
+sending party. These exchanges are symmetric, i.e. switching rx and tx
+results again in a valid exchange. Currently, no longer exchanges are known.
+
+
+Commands: Requests, Responses, and Events
+=========================================
+
+Commands are sent as payload inside a data frame. Currently, this is the
+only known payload type of |DATA| frames, with a payload-type value of
+``0x80`` (:c:type:`SSH_PLD_TYPE_CMD <ssh_payload_type>`).
+
+The command-type payload (:c:type:`struct ssh_command <ssh_command>`)
+consists of an eight-byte command structure, followed by optional and
+variable length command data. The length of this optional data is derived
+from the frame payload length given in the corresponding frame, i.e. it is
+``frame.len - sizeof(struct ssh_command)``. The command struct contains the
+following fields, packed together and in order:
+
+.. flat-table:: SSH Command
+ :widths: 1 1 4
+ :header-rows: 1
+
+ * - Field
+ - Type
+ - Description
+
+ * - |TYPE|
+ - |u8|
+ - Type of the payload. For commands always ``0x80``.
+
+ * - |TC|
+ - |u8|
+ - Target category.
+
+ * - |TID| (out)
+ - |u8|
+ - Target ID for outgoing (host to EC) commands.
+
+ * - |TID| (in)
+ - |u8|
+ - Target ID for incoming (EC to host) commands.
+
+ * - |IID|
+ - |u8|
+ - Instance ID.
+
+ * - |RQID|
+ - |u16|
+ - Request ID.
+
+ * - |CID|
+ - |u8|
+ - Command ID.
+
+The command struct and data, in general, does not contain any failure
+detection mechanism (e.g. CRCs), this is solely done on the frame level.
+
+Command-type payloads are used by the host to send commands and requests to
+the EC as well as by the EC to send responses and events back to the host.
+We differentiate between requests (sent by the host), responses (sent by the
+EC in response to a request), and events (sent by the EC without a preceding
+request).
+
+Commands and events are uniquely identified by their target category
+(``TC``) and command ID (``CID``). The target category specifies a general
+category for the command (e.g. system in general, vs. battery and ac, vs.
+temperature, and so on), while the command ID specifies the command inside
+that category. Only the combination of |TC| + |CID| is unique. Additionally,
+commands have an instance ID (``IID``), which is used to differentiate
+between different sub-devices. For example ``TC=3`` ``CID=1`` is a
+request to get the temperature on a thermal sensor, where |IID| specifies
+the respective sensor. If the instance ID is not used, it should be set to
+zero. If instance IDs are used, they, in general, start with a value of one,
+whereas zero may be used for instance independent queries, if applicable. A
+response to a request should have the same target category, command ID, and
+instance ID as the corresponding request.
+
+Responses are matched to their corresponding request via the request ID
+(``RQID``) field. This is a 16 bit wrapping counter similar to the sequence
+ID on the frames. Note that the sequence ID of the frames for a
+request-response pair does not match. Only the request ID has to match.
+Frame-protocol wise these are two separate exchanges, and may even be
+separated, e.g. by an event being sent after the request but before the
+response. Not all commands produce a response, and this is not detectable by
+|TC| + |CID|. It is the responsibility of the issuing party to wait for a
+response (or signal this to the communication framework, as is done in
+SAN/ACPI via the ``SNC`` flag).
+
+Events are identified by unique and reserved request IDs. These IDs should
+not be used by the host when sending a new request. They are used on the
+host to, first, detect events and, second, match them with a registered
+event handler. Request IDs for events are chosen by the host and directed to
+the EC when setting up and enabling an event source (via the
+enable-event-source request). The EC then uses the specified request ID for
+events sent from the respective source. Note that an event should still be
+identified by its target category, command ID, and, if applicable, instance
+ID, as a single event source can send multiple different event types. In
+general, however, a single target category should map to a single reserved
+event request ID.
+
+Furthermore, requests, responses, and events have an associated target ID
+(``TID``). This target ID is split into output (host to EC) and input (EC to
+host) fields, with the respecting other field (e.g. output field on incoming
+messages) set to zero. Two ``TID`` values are known: Primary (``0x01``) and
+secondary (``0x02``). In general, the response to a request should have the
+same ``TID`` value, however, the field (output vs. input) should be used in
+accordance to the direction in which the response is sent (i.e. on the input
+field, as responses are generally sent from the EC to the host).
+
+Note that, even though requests and events should be uniquely identifiable
+by target category and command ID alone, the EC may require specific
+priority and instance ID values to accept a command. A command that is
+accepted for ``TID=1``, for example, may not be accepted for ``TID=2``
+and vice versa.
+
+
+Limitations and Observations
+============================
+
+The protocol can, in theory, handle up to ``U8_MAX`` frames in parallel,
+with up to ``U16_MAX`` pending requests (neglecting request IDs reserved for
+events). In practice, however, this is more limited. From our testing
+(although via a python and thus a user-space program), it seems that the EC
+can handle up to four requests (mostly) reliably in parallel at a certain
+time. With five or more requests in parallel, consistent discarding of
+commands (ACKed frame but no command response) has been observed. For five
+simultaneous commands, this reproducibly resulted in one command being
+dropped and four commands being handled.
+
+However, it has also been noted that, even with three requests in parallel,
+occasional frame drops happen. Apart from this, with a limit of three
+pending requests, no dropped commands (i.e. command being dropped but frame
+carrying command being ACKed) have been observed. In any case, frames (and
+possibly also commands) should be re-sent by the host if a certain timeout
+is exceeded. This is done by the EC for frames with a timeout of one second,
+up to two re-tries (i.e. three transmissions in total). The limit of
+re-tries also applies to received NAKs, and, in a worst case scenario, can
+lead to entire messages being dropped.
+
+While this also seems to work fine for pending data frames as long as no
+transmission failures occur, implementation and handling of these seems to
+depend on the assumption that there is only one non-acknowledged data frame.
+In particular, the detection of repeated frames relies on the last sequence
+number. This means that, if a frame that has been successfully received by
+the EC is sent again, e.g. due to the host not receiving an |ACK|, the EC
+will only detect this if it has the sequence ID of the last frame received
+by the EC. As an example: Sending two frames with ``SEQ=0`` and ``SEQ=1``
+followed by a repetition of ``SEQ=0`` will not detect the second ``SEQ=0``
+frame as such, and thus execute the command in this frame each time it has
+been received, i.e. twice in this example. Sending ``SEQ=0``, ``SEQ=1`` and
+then repeating ``SEQ=1`` will detect the second ``SEQ=1`` as repetition of
+the first one and ignore it, thus executing the contained command only once.
+
+In conclusion, this suggests a limit of at most one pending un-ACKed frame
+(per party, effectively leading to synchronous communication regarding
+frames) and at most three pending commands. The limit to synchronous frame
+transfers seems to be consistent with behavior observed on Windows.
diff --git a/MAINTAINERS b/MAINTAINERS
index f0ebf547d984..f0d23c113f3e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11697,6 +11697,7 @@ M: Maximilian Luz <luzmaximilian@gmail.com>
S: Maintained
W: https://github.com/linux-surface/surface-aggregator-module
C: irc://chat.freenode.net/##linux-surface
+F: Documentation/driver-api/surface_aggregator/
F: drivers/platform/surface/aggregator/
F: include/linux/surface_aggregator/
--
2.29.2
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 8/9] platform/surface: Add Surface Aggregator user-space interface
2020-11-15 19:21 [PATCH 0/9] Add support for Microsoft Surface System Aggregator Module Maximilian Luz
2020-11-15 19:21 ` [PATCH 7/9] docs: driver-api: Add Surface Aggregator subsystem documentation Maximilian Luz
@ 2020-11-15 19:21 ` Maximilian Luz
2020-11-17 20:36 ` Randy Dunlap
2020-11-15 19:21 ` [PATCH 9/9] platform/surface: Add Surface ACPI Notify driver Maximilian Luz
2020-11-24 11:59 ` [PATCH 0/9] Add support for Microsoft Surface System Aggregator Module Hans de Goede
3 siblings, 1 reply; 10+ messages in thread
From: Maximilian Luz @ 2020-11-15 19:21 UTC (permalink / raw)
To: linux-kernel
Cc: Maximilian Luz, Hans de Goede, Mark Gross, Arnd Bergmann,
Greg Kroah-Hartman, Jonathan Corbet, Blaž Hrastnik,
Dorian Stoll, linux-doc, platform-driver-x86
Add a misc-device providing user-space access to the Surface Aggregator
EC, mainly intended for debugging, testing, and reverse-engineering.
This interface gives user-space applications the ability to send
requests to the EC and receive the corresponding responses.
The device-file is managed by a pseudo platform-device and corresponding
driver to avoid dependence on the dedicated bus, allowing it to be
loaded in a minimal configuration.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
---
Changes from RFC:
- add copyright lines
- change SPDX identifier to GPL-2.0+ (was GPL-2.0-or-later)
- move from debugfs to proper misc-device
- move interface definitions to uapi header
- remove versioning
- allocate platform device dynamically
- prioritize EFAULT error in IOCTL return
- use ENOTTY error for unknown IOCTLs
- fix IOCTL compatibility for 32-bit user-space on 64-bit kernels
- mark request struct as __attribute__((__packed__))
- address issues when driver is unbound while file still open
---
.../surface_aggregator/clients/cdev.rst | 85 +++++
.../surface_aggregator/clients/index.rst | 12 +-
MAINTAINERS | 2 +
drivers/platform/surface/Kconfig | 17 +
drivers/platform/surface/Makefile | 1 +
.../surface/surface_aggregator_cdev.c | 299 ++++++++++++++++++
include/uapi/linux/surface_aggregator/cdev.h | 58 ++++
7 files changed, 473 insertions(+), 1 deletion(-)
create mode 100644 Documentation/driver-api/surface_aggregator/clients/cdev.rst
create mode 100644 drivers/platform/surface/surface_aggregator_cdev.c
create mode 100644 include/uapi/linux/surface_aggregator/cdev.h
diff --git a/Documentation/driver-api/surface_aggregator/clients/cdev.rst b/Documentation/driver-api/surface_aggregator/clients/cdev.rst
new file mode 100644
index 000000000000..720c9c03aa0e
--- /dev/null
+++ b/Documentation/driver-api/surface_aggregator/clients/cdev.rst
@@ -0,0 +1,85 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+.. |u8| replace:: :c:type:`u8 <u8>`
+.. |u16| replace:: :c:type:`u16 <u16>`
+.. |ssam_cdev_request| replace:: :c:type:`struct ssam_cdev_request <ssam_cdev_request>`
+.. |ssam_request_flags| replace:: :c:type:`enum ssam_request_flags <ssam_request_flags>`
+
+==============================
+User-Space EC Interface (cdev)
+==============================
+
+The ``surface_aggregator_cdev`` module provides a misc-device for the SSAM
+controller to allow for a (more or less) direct connection from user-space to
+the SAM EC. It is intended to be used for development and debugging, and
+therefore should not be used or relied upon in any other way. Note that this
+module is not loaded automatically, but instead must be loaded manually.
+
+The provided interface is accessible through the ``/dev/surface/aggregator``
+device-file. All functionality of this interface is provided via IOCTLs.
+These IOCTLs and their respective input/output parameter structs are defined in
+``include/uapi/linux/surface_aggregator/cdev.h``.
+
+
+Controller IOCTLs
+=================
+
+The following IOCTLs are provided:
+
+.. flat-table:: Controller IOCTLs
+ :widths: 1 1 1 1 4
+ :header-rows: 1
+
+ * - Type
+ - Number
+ - Direction
+ - Name
+ - Description
+
+ * - ``0xA5``
+ - ``1``
+ - ``WR``
+ - ``REQUEST``
+ - Perform synchronous SAM request.
+
+
+``REQUEST``
+-----------
+
+Defined as ``_IOWR(0xA5, 1, struct ssam_cdev_request)``.
+
+Executes a synchronous SAM request. The request specification is passed in
+as argument of type |ssam_cdev_request|, which is then written to/modified
+by the IOCTL to return status and result of the request.
+
+Request payload data must be allocated separately and is passed in via the
+``payload.data`` and ``payload.length`` members. If a response is required,
+the response buffer must be allocated by the caller and passed in via the
+``response.data`` member. The ``response.length`` member must be set to the
+capacity of this buffer, or if no response is required, zero. Upon
+completion of the request, the call will write the response to the response
+buffer (if its capacity allows it) and overwrite the length field with the
+actual size of the response, in bytes.
+
+Additionally, if the request has a response, this should be indicated via
+the request flags, as is done with in-kernel requests. Request flags can be
+set via the ``flags`` member and the values correspond to the values found
+in |ssam_request_flags|.
+
+Finally, the status of the request itself is returned in the ``status``
+member (a negative value indicating failure). Note that failure indication
+of the IOCTL is separated from failure indication of the request: The IOCTL
+returns a negative status code if anything failed during setup of the
+request (``-EFAULT``) or if the provided argument or any of its fields are
+invalid (``-EINVAL``). In this case, the status value of the request
+argument may be set, providing more detail on what went wrong (e.g.
+``-ENOMEM`` for out-of-memory), but this value may also be zero. The IOCTL
+will return with a zero status code in case the request has been set up,
+submitted, and completed (i.e. handed back to user-space) successfully from
+inside the IOCTL, but the request ``status`` member may still be negative in
+case the actual execution of the request failed after it has been submitted.
+
+A full definition of the argument struct is provided below:
+
+.. kernel-doc:: include/uapi/linux/surface_aggregator/cdev.h
+ :functions: ssam_cdev_request
diff --git a/Documentation/driver-api/surface_aggregator/clients/index.rst b/Documentation/driver-api/surface_aggregator/clients/index.rst
index 31e026d96102..ab260ec82cfb 100644
--- a/Documentation/driver-api/surface_aggregator/clients/index.rst
+++ b/Documentation/driver-api/surface_aggregator/clients/index.rst
@@ -7,4 +7,14 @@ Client Driver Documentation
This is the documentation for client drivers themselves. Refer to
:doc:`../client` for documentation on how to write client drivers.
-.. Place documentation for individual client drivers here.
+.. toctree::
+ :maxdepth: 1
+
+ cdev
+
+.. only:: subproject and html
+
+ Indices
+ =======
+
+ * :ref:`genindex`
diff --git a/MAINTAINERS b/MAINTAINERS
index f0d23c113f3e..c776343a49c6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11699,7 +11699,9 @@ W: https://github.com/linux-surface/surface-aggregator-module
C: irc://chat.freenode.net/##linux-surface
F: Documentation/driver-api/surface_aggregator/
F: drivers/platform/surface/aggregator/
+F: drivers/platform/surface/surface_aggregator_cdev.c
F: include/linux/surface_aggregator/
+F: include/uapi/linux/surface_aggregator/
MICROTEK X6 SCANNER
M: Oliver Neukum <oliver@neukum.org>
diff --git a/drivers/platform/surface/Kconfig b/drivers/platform/surface/Kconfig
index 5af22f5141ff..cecad7a0cb7b 100644
--- a/drivers/platform/surface/Kconfig
+++ b/drivers/platform/surface/Kconfig
@@ -40,6 +40,23 @@ config SURFACE_3_POWER_OPREGION
This driver provides support for ACPI operation
region of the Surface 3 battery platform driver.
+config SURFACE_AGGREGATOR_CDEV
+ tristate "Surface System Aggregator Module User-Space Interface"
+ depends on SURFACE_AGGREGATOR
+ help
+ Provides a misc-device interface to the Surface System Aggregator
+ Module (SSAM) controller.
+
+ This option provides a module (called surface_aggregator_cdev), that,
+ when loaded, will add a client device (and its respective driver) to
+ the SSAM controller. Said client device manages a misc-device
+ interface (/dev/surface/aggregator), which can be used by user-space
+ tools to directly communicate with the SSAM EC by sending requests and
+ receiving the corresponding responses.
+
+ The provided interface is intended for debugging and development only,
+ and should not be used otherwise.
+
config SURFACE_GPE
tristate "Surface GPE/Lid Support Driver"
depends on ACPI
diff --git a/drivers/platform/surface/Makefile b/drivers/platform/surface/Makefile
index 034134fe0264..161f0ad05795 100644
--- a/drivers/platform/surface/Makefile
+++ b/drivers/platform/surface/Makefile
@@ -8,5 +8,6 @@ obj-$(CONFIG_SURFACE3_WMI) += surface3-wmi.o
obj-$(CONFIG_SURFACE_3_BUTTON) += surface3_button.o
obj-$(CONFIG_SURFACE_3_POWER_OPREGION) += surface3_power.o
obj-$(CONFIG_SURFACE_AGGREGATOR) += aggregator/
+obj-$(CONFIG_SURFACE_AGGREGATOR_CDEV) += surface_aggregator_cdev.o
obj-$(CONFIG_SURFACE_GPE) += surface_gpe.o
obj-$(CONFIG_SURFACE_PRO3_BUTTON) += surfacepro3_button.o
diff --git a/drivers/platform/surface/surface_aggregator_cdev.c b/drivers/platform/surface/surface_aggregator_cdev.c
new file mode 100644
index 000000000000..f5e81cd67357
--- /dev/null
+++ b/drivers/platform/surface/surface_aggregator_cdev.c
@@ -0,0 +1,299 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Provides user-space access to the SSAM EC via the /dev/surface/aggregator
+ * misc device. Intended for debugging and development.
+ *
+ * Copyright (C) 2020 Maximilian Luz <luzmaximilian@gmail.com>
+ */
+
+#include <linux/fs.h>
+#include <linux/kernel.h>
+#include <linux/kref.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/rwsem.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+
+#include <linux/surface_aggregator/cdev.h>
+#include <linux/surface_aggregator/controller.h>
+
+#define SSAM_CDEV_DEVICE_NAME "surface_aggregator_cdev"
+
+struct ssam_cdev {
+ struct kref kref;
+ struct rw_semaphore lock;
+ struct ssam_controller *ctrl;
+ struct miscdevice mdev;
+};
+
+static void __ssam_cdev_release(struct kref *kref)
+{
+ kfree(container_of(kref, struct ssam_cdev, kref));
+}
+
+static struct ssam_cdev *ssam_cdev_get(struct ssam_cdev *cdev)
+{
+ if (cdev)
+ kref_get(&cdev->kref);
+
+ return cdev;
+}
+
+static void ssam_cdev_put(struct ssam_cdev *cdev)
+{
+ if (cdev)
+ kref_put(&cdev->kref, __ssam_cdev_release);
+}
+
+static int ssam_cdev_device_open(struct inode *inode, struct file *filp)
+{
+ struct miscdevice *mdev = filp->private_data;
+ struct ssam_cdev *cdev = container_of(mdev, struct ssam_cdev, mdev);
+
+ filp->private_data = ssam_cdev_get(cdev);
+ return stream_open(inode, filp);
+}
+
+static int ssam_cdev_device_release(struct inode *inode, struct file *filp)
+{
+ ssam_cdev_put(filp->private_data);
+ return 0;
+}
+
+static long ssam_cdev_request(struct ssam_cdev *cdev, unsigned long arg)
+{
+ struct ssam_cdev_request __user *r;
+ struct ssam_cdev_request rqst;
+ struct ssam_request spec;
+ struct ssam_response rsp;
+ const void __user *plddata;
+ void __user *rspdata;
+ int status = 0, ret = 0, tmp;
+
+ r = (struct ssam_cdev_request __user *)arg;
+ ret = copy_struct_from_user(&rqst, sizeof(rqst), r, sizeof(*r));
+ if (ret)
+ goto out;
+
+ plddata = u64_to_user_ptr(rqst.payload.data);
+ rspdata = u64_to_user_ptr(rqst.response.data);
+
+ // setup basic request fields
+ spec.target_category = rqst.target_category;
+ spec.target_id = rqst.target_id;
+ spec.command_id = rqst.command_id;
+ spec.instance_id = rqst.instance_id;
+ spec.flags = rqst.flags;
+ spec.length = rqst.payload.length;
+ spec.payload = NULL;
+
+ rsp.capacity = rqst.response.length;
+ rsp.length = 0;
+ rsp.pointer = NULL;
+
+ // get request payload from user-space
+ if (spec.length) {
+ if (!plddata) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ spec.payload = kzalloc(spec.length, GFP_KERNEL);
+ if (!spec.payload) {
+ status = -ENOMEM;
+ ret = -EFAULT;
+ goto out;
+ }
+
+ if (copy_from_user((void *)spec.payload, plddata, spec.length)) {
+ ret = -EFAULT;
+ goto out;
+ }
+ }
+
+ // allocate response buffer
+ if (rsp.capacity) {
+ if (!rspdata) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ rsp.pointer = kzalloc(rsp.capacity, GFP_KERNEL);
+ if (!rsp.pointer) {
+ status = -ENOMEM;
+ ret = -EFAULT;
+ goto out;
+ }
+ }
+
+ // perform request
+ status = ssam_request_sync(cdev->ctrl, &spec, &rsp);
+ if (status)
+ goto out;
+
+ // copy response to user-space
+ if (rsp.length && copy_to_user(rspdata, rsp.pointer, rsp.length))
+ ret = -EFAULT;
+
+out:
+ // always try to set response-length and status
+ tmp = put_user(rsp.length, &r->response.length);
+ if (tmp)
+ ret = tmp;
+
+ tmp = put_user(status, &r->status);
+ if (tmp)
+ ret = tmp;
+
+ // cleanup
+ kfree(spec.payload);
+ kfree(rsp.pointer);
+
+ return ret;
+}
+
+static long __ssam_cdev_device_ioctl(struct ssam_cdev *cdev, unsigned int cmd,
+ unsigned long arg)
+{
+ switch (cmd) {
+ case SSAM_CDEV_REQUEST:
+ return ssam_cdev_request(cdev, arg);
+
+ default:
+ return -ENOTTY;
+ }
+}
+
+static long ssam_cdev_device_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
+{
+ struct ssam_cdev *cdev = file->private_data;
+ long status;
+
+ // ensure that controller is valid for as long as we need it
+ if (down_read_killable(&cdev->lock))
+ return -ERESTARTSYS;
+
+ if (!cdev->ctrl) {
+ up_read(&cdev->lock);
+ return -ENODEV;
+ }
+
+ status = __ssam_cdev_device_ioctl(cdev, cmd, arg);
+
+ up_read(&cdev->lock);
+ return status;
+}
+
+static const struct file_operations ssam_controller_fops = {
+ .owner = THIS_MODULE,
+ .open = ssam_cdev_device_open,
+ .release = ssam_cdev_device_release,
+ .unlocked_ioctl = ssam_cdev_device_ioctl,
+ .compat_ioctl = ssam_cdev_device_ioctl,
+ .llseek = noop_llseek,
+};
+
+static int ssam_dbg_device_probe(struct platform_device *pdev)
+{
+ struct ssam_controller *ctrl;
+ struct ssam_cdev *cdev;
+ int status;
+
+ status = ssam_client_bind(&pdev->dev, &ctrl);
+ if (status)
+ return status == -ENXIO ? -EPROBE_DEFER : status;
+
+ cdev = kzalloc(sizeof(*cdev), GFP_KERNEL);
+ if (!cdev)
+ return -ENOMEM;
+
+ kref_init(&cdev->kref);
+ init_rwsem(&cdev->lock);
+ cdev->ctrl = ctrl;
+
+ cdev->mdev.parent = &pdev->dev;
+ cdev->mdev.minor = MISC_DYNAMIC_MINOR;
+ cdev->mdev.name = "surface_aggregator";
+ cdev->mdev.nodename = "surface/aggregator";
+ cdev->mdev.fops = &ssam_controller_fops;
+
+ status = misc_register(&cdev->mdev);
+ if (status) {
+ kfree(cdev);
+ return status;
+ }
+
+ platform_set_drvdata(pdev, cdev);
+ return 0;
+}
+
+static int ssam_dbg_device_remove(struct platform_device *pdev)
+{
+ struct ssam_cdev *cdev = platform_get_drvdata(pdev);
+
+ misc_deregister(&cdev->mdev);
+
+ /*
+ * The controller is only guaranteed to be valid for as long as the
+ * driver is bound. Remove controller so that any lingering open files
+ * cannot access it any more after we're gone.
+ */
+ down_write(&cdev->lock);
+ cdev->ctrl = NULL;
+ up_write(&cdev->lock);
+
+ ssam_cdev_put(cdev);
+ return 0;
+}
+
+static struct platform_device *ssam_cdev_device;
+
+static struct platform_driver ssam_cdev_driver = {
+ .probe = ssam_dbg_device_probe,
+ .remove = ssam_dbg_device_remove,
+ .driver = {
+ .name = SSAM_CDEV_DEVICE_NAME,
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
+ },
+};
+
+static int __init ssam_debug_init(void)
+{
+ int status;
+
+ ssam_cdev_device = platform_device_alloc(SSAM_CDEV_DEVICE_NAME,
+ PLATFORM_DEVID_NONE);
+ if (!ssam_cdev_device)
+ return -ENOMEM;
+
+ status = platform_device_add(ssam_cdev_device);
+ if (status)
+ goto err_device;
+
+ status = platform_driver_register(&ssam_cdev_driver);
+ if (status)
+ goto err_driver;
+
+ return 0;
+
+err_driver:
+ platform_device_del(ssam_cdev_device);
+err_device:
+ platform_device_put(ssam_cdev_device);
+ return status;
+}
+module_init(ssam_debug_init);
+
+static void __exit ssam_debug_exit(void)
+{
+ platform_driver_unregister(&ssam_cdev_driver);
+ platform_device_unregister(ssam_cdev_device);
+}
+module_exit(ssam_debug_exit);
+
+MODULE_AUTHOR("Maximilian Luz <luzmaximilian@gmail.com>");
+MODULE_DESCRIPTION("User-space interface for Surface System Aggregator Module");
+MODULE_LICENSE("GPL");
diff --git a/include/uapi/linux/surface_aggregator/cdev.h b/include/uapi/linux/surface_aggregator/cdev.h
new file mode 100644
index 000000000000..1a8bc0249f8e
--- /dev/null
+++ b/include/uapi/linux/surface_aggregator/cdev.h
@@ -0,0 +1,58 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+/*
+ * Surface System Aggregator Module (SSAM) user-space EC interface.
+ *
+ * Definitions, structs, and IOCTLs for the /dev/surface/aggregator misc
+ * device. This device provides direct user-space access to the SSAM EC.
+ * Intended for debugging and development.
+ *
+ * Copyright (C) 2020 Maximilian Luz <luzmaximilian@gmail.com>
+ */
+
+#ifndef _UAPI_LINUX_SURFACE_AGGREGATOR_CDEV_H
+#define _UAPI_LINUX_SURFACE_AGGREGATOR_CDEV_H
+
+#include <linux/ioctl.h>
+#include <linux/types.h>
+
+/**
+ * struct ssam_cdev_request - Controller request IOCTL argument.
+ * @target_category: Target category of the SAM request.
+ * @target_id: Target ID of the SAM request.
+ * @command_id: Command ID of the SAM request.
+ * @instance_id: Instance ID of the SAM request.
+ * @flags: SAM Request flags.
+ * @status: Request status (output).
+ * @payload: Request payload (input data).
+ * @payload.data: Pointer to request payload data.
+ * @payload.length: Length of request payload data (in bytes).
+ * @response: Request response (output data).
+ * @response.data: Pointer to response buffer.
+ * @response.length: On input: Capacity of response buffer (in bytes).
+ * On output: Length of request response (number of bytes
+ * in the buffer that are actually used).
+ */
+struct ssam_cdev_request {
+ __u8 target_category;
+ __u8 target_id;
+ __u8 command_id;
+ __u8 instance_id;
+ __u16 flags;
+ __s16 status;
+
+ struct {
+ __u64 data;
+ __u16 length;
+ __u8 __pad[6];
+ } payload;
+
+ struct {
+ __u64 data;
+ __u16 length;
+ __u8 __pad[6];
+ } response;
+} __attribute__((__packed__));
+
+#define SSAM_CDEV_REQUEST _IOWR(0xA5, 1, struct ssam_cdev_request)
+
+#endif /* _UAPI_LINUX_SURFACE_AGGREGATOR_CDEV_H */
--
2.29.2
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 9/9] platform/surface: Add Surface ACPI Notify driver
2020-11-15 19:21 [PATCH 0/9] Add support for Microsoft Surface System Aggregator Module Maximilian Luz
2020-11-15 19:21 ` [PATCH 7/9] docs: driver-api: Add Surface Aggregator subsystem documentation Maximilian Luz
2020-11-15 19:21 ` [PATCH 8/9] platform/surface: Add Surface Aggregator user-space interface Maximilian Luz
@ 2020-11-15 19:21 ` Maximilian Luz
2020-11-17 20:09 ` Randy Dunlap
2020-11-24 11:59 ` [PATCH 0/9] Add support for Microsoft Surface System Aggregator Module Hans de Goede
3 siblings, 1 reply; 10+ messages in thread
From: Maximilian Luz @ 2020-11-15 19:21 UTC (permalink / raw)
To: linux-kernel
Cc: Maximilian Luz, Hans de Goede, Mark Gross, Arnd Bergmann,
Greg Kroah-Hartman, Rafael J . Wysocki, Len Brown,
Jonathan Corbet, Blaž Hrastnik, Dorian Stoll,
platform-driver-x86, linux-acpi, linux-doc
The Surface ACPI Notify (SAN) device provides an ACPI interface to the
Surface Aggregator EC, specifically the Surface Serial Hub interface.
This interface allows EC requests to be made from ACPI code and can
convert a subset of EC events back to ACPI notifications.
Specifically, this interface provides a GenericSerialBus operation
region ACPI code can execute a request by writing the request command
data and payload to this operation region and reading back the
corresponding response via a write-then-read operation. Furthermore,
this interface provides a _DSM method to be called when certain events
from the EC have been received, essentially turning them into ACPI
notifications.
The driver provided in this commit essentially takes care of translating
the request data written to the operation region, executing the request,
waiting for it to finish, and finally writing and translating back the
response (if the request has one). Furthermore, this driver takes care
of enabling the events handled via ACPI _DSM calls. Lastly, this driver
also exposes an interface providing discrete GPU (dGPU) power-on
notifications on the Surface Book 2, which are also received via the
operation region interface (but not handled by the SAN driver directly),
making them accessible to other drivers (such as a dGPU hot-plug driver
that may be added later on).
On 5th and 6th generation Surface devices (Surface Pro 5/2017, Pro 6,
Book 2, Laptop 1 and 2), the SAN interface provides full battery and
thermal subsystem access, as well as other EC based functionality. On
those models, battery and thermal sensor devices are implemented as
standard ACPI devices of that type, however, forward ACPI calls to the
corresponding Surface Aggregator EC request via the SAN interface and
receive corresponding notifications (e.g. battery information change)
from it. This interface is therefore required to provide said
functionality on those devices.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
---
Changes from RFC:
- add copyright lines
- change SPDX identifier to GPL-2.0+ (was GPL-2.0-or-later)
- fix invalid pointer calculation in san_evt_tmp
- add explicit dependency on CONFIG_ACPI
- remove default in Kconfig
---
.../surface_aggregator/clients/index.rst | 1 +
.../surface_aggregator/clients/san.rst | 44 +
MAINTAINERS | 2 +
drivers/platform/surface/Kconfig | 20 +
drivers/platform/surface/Makefile | 1 +
.../platform/surface/surface_acpi_notify.c | 884 ++++++++++++++++++
include/linux/surface_acpi_notify.h | 39 +
7 files changed, 991 insertions(+)
create mode 100644 Documentation/driver-api/surface_aggregator/clients/san.rst
create mode 100644 drivers/platform/surface/surface_acpi_notify.c
create mode 100644 include/linux/surface_acpi_notify.h
diff --git a/Documentation/driver-api/surface_aggregator/clients/index.rst b/Documentation/driver-api/surface_aggregator/clients/index.rst
index ab260ec82cfb..3ccabce23271 100644
--- a/Documentation/driver-api/surface_aggregator/clients/index.rst
+++ b/Documentation/driver-api/surface_aggregator/clients/index.rst
@@ -11,6 +11,7 @@ This is the documentation for client drivers themselves. Refer to
:maxdepth: 1
cdev
+ san
.. only:: subproject and html
diff --git a/Documentation/driver-api/surface_aggregator/clients/san.rst b/Documentation/driver-api/surface_aggregator/clients/san.rst
new file mode 100644
index 000000000000..38c2580e7758
--- /dev/null
+++ b/Documentation/driver-api/surface_aggregator/clients/san.rst
@@ -0,0 +1,44 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+.. |san_client_link| replace:: :c:func:`san_client_link`
+.. |san_dgpu_notifier_register| replace:: :c:func:`san_dgpu_notifier_register`
+.. |san_dgpu_notifier_unregister| replace:: :c:func:`san_dgpu_notifier_unregister`
+
+===================
+Surface ACPI Notify
+===================
+
+The Surface ACPI Notify (SAN) device provides the bridge between ACPI and
+SAM controller. Specifically, ACPI code can execute requests and handle
+battery and thermal events via this interface. In addition to this, events
+relating to the discrete GPU (dGPU) of the Surface Book 2 can be sent from
+ACPI code (note: the Surface Book 3 uses a different method for this). The
+only currently known event sent via this interface is a dGPU power-on
+notification. While this driver handles the former part internally, it only
+relays the dGPU events to any other driver interested via its public API and
+does not handle them.
+
+The public interface of this driver is split into two parts: Client
+registration and notifier-block registration.
+
+A client to the SAN interface can be linked as consumer to the SAN device
+via |san_client_link|. This can be used to ensure that the a client
+receiving dGPU events does not miss any events due to the SAN interface not
+being set up as this forces the client driver to unbind once the SAN driver
+is unbound.
+
+Notifier-blocks can be registered by any device for as long as the module is
+loaded, regardless of being linked as client or not. Registration is done
+with |san_dgpu_notifier_register|. If the notifier is not needed any more, it
+should be unregistered via |san_dgpu_notifier_unregister|.
+
+Consult the API documentation below for more details.
+
+
+API Documentation
+=================
+
+.. kernel-doc:: include/linux/surface_acpi_notify.h
+
+.. kernel-doc:: drivers/platform/surface/surface_acpi_notify.c
+ :export:
diff --git a/MAINTAINERS b/MAINTAINERS
index c776343a49c6..f15431cbf8ff 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11699,7 +11699,9 @@ W: https://github.com/linux-surface/surface-aggregator-module
C: irc://chat.freenode.net/##linux-surface
F: Documentation/driver-api/surface_aggregator/
F: drivers/platform/surface/aggregator/
+F: drivers/platform/surface/surface_acpi_notify.c
F: drivers/platform/surface/surface_aggregator_cdev.c
+F: include/linux/surface_acpi_notify.h
F: include/linux/surface_aggregator/
F: include/uapi/linux/surface_aggregator/
diff --git a/drivers/platform/surface/Kconfig b/drivers/platform/surface/Kconfig
index cecad7a0cb7b..3b0da86546fa 100644
--- a/drivers/platform/surface/Kconfig
+++ b/drivers/platform/surface/Kconfig
@@ -40,6 +40,26 @@ config SURFACE_3_POWER_OPREGION
This driver provides support for ACPI operation
region of the Surface 3 battery platform driver.
+config SURFACE_ACPI_NOTIFY
+ tristate "Surface ACPI Notify Driver"
+ depends on ACPI
+ depends on SURFACE_AGGREGATOR
+ help
+ Surface ACPI Notify (SAN) driver for Microsoft Surface devices.
+
+ This driver provides support for the ACPI interface (called SAN) of
+ the Surface System Aggregator Module (SSAM) EC. This interface is used
+ on 5th- and 6th-generation Microsoft Surface devices (including
+ Surface Pro 5 and 6, Surface Book 2, Surface Laptops 1 and 2, and in
+ reduced functionality on the Surface Laptop 3) to execute SSAM
+ requests directly from ACPI code, as well as receive SSAM events and
+ turn them into ACPI notifications. It essentially acts as a
+ translation layer between the SSAM controller and ACPI.
+
+ Specifically, this driver may be needed for battery status reporting,
+ thermal sensor access, and real-time clock information, depending on
+ the Surface device in question.
+
config SURFACE_AGGREGATOR_CDEV
tristate "Surface System Aggregator Module User-Space Interface"
depends on SURFACE_AGGREGATOR
diff --git a/drivers/platform/surface/Makefile b/drivers/platform/surface/Makefile
index 161f0ad05795..3eb971006877 100644
--- a/drivers/platform/surface/Makefile
+++ b/drivers/platform/surface/Makefile
@@ -7,6 +7,7 @@
obj-$(CONFIG_SURFACE3_WMI) += surface3-wmi.o
obj-$(CONFIG_SURFACE_3_BUTTON) += surface3_button.o
obj-$(CONFIG_SURFACE_3_POWER_OPREGION) += surface3_power.o
+obj-$(CONFIG_SURFACE_ACPI_NOTIFY) += surface_acpi_notify.o
obj-$(CONFIG_SURFACE_AGGREGATOR) += aggregator/
obj-$(CONFIG_SURFACE_AGGREGATOR_CDEV) += surface_aggregator_cdev.o
obj-$(CONFIG_SURFACE_GPE) += surface_gpe.o
diff --git a/drivers/platform/surface/surface_acpi_notify.c b/drivers/platform/surface/surface_acpi_notify.c
new file mode 100644
index 000000000000..7a5b8f280036
--- /dev/null
+++ b/drivers/platform/surface/surface_acpi_notify.c
@@ -0,0 +1,884 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for the Surface ACPI Notify (SAN) interface/shim.
+ *
+ * Translates communication from ACPI to Surface System Aggregator Module
+ * (SSAM/SAM) requests and back, specifically SAM-over-SSH. Translates SSAM
+ * events back to ACPI notifications. Allows handling of discrete GPU
+ * notifications sent from ACPI via the SAN interface by providing them to any
+ * registered external driver.
+ *
+ * Copyright (C) 2019-2020 Maximilian Luz <luzmaximilian@gmail.com>
+ */
+
+#include <asm/unaligned.h>
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/platform_device.h>
+#include <linux/rwsem.h>
+
+#include <linux/surface_aggregator/controller.h>
+#include <linux/surface_acpi_notify.h>
+
+
+struct san_data {
+ struct device *dev;
+ struct ssam_controller *ctrl;
+
+ struct acpi_connection_info info;
+
+ struct ssam_event_notifier nf_bat;
+ struct ssam_event_notifier nf_tmp;
+};
+
+#define to_san_data(ptr, member) \
+ container_of(ptr, struct san_data, member)
+
+
+/* -- dGPU notifier interface. ---------------------------------------------- */
+
+struct san_rqsg_if {
+ struct rw_semaphore lock;
+ struct device *dev;
+ struct blocking_notifier_head nh;
+};
+
+static struct san_rqsg_if san_rqsg_if = {
+ .lock = __RWSEM_INITIALIZER(san_rqsg_if.lock),
+ .dev = NULL,
+ .nh = BLOCKING_NOTIFIER_INIT(san_rqsg_if.nh),
+};
+
+static int san_set_rqsg_interface_device(struct device *dev)
+{
+ int status = 0;
+
+ down_write(&san_rqsg_if.lock);
+ if (!san_rqsg_if.dev && dev)
+ san_rqsg_if.dev = dev;
+ else
+ status = -EBUSY;
+ up_write(&san_rqsg_if.lock);
+
+ return status;
+}
+
+/**
+ * san_client_link() - Link client as consumer to SAN device.
+ * @client: The client to link.
+ *
+ * Sets up a device link between the provided client device as consumer and
+ * the SAN device as provider. This function can be used to ensure that the
+ * SAN interface has been set up and will be set up for as long as the driver
+ * of the client device is bound. This guarantees that, during that time, all
+ * dGPU events will be received by any registered notifier.
+ *
+ * The link will be automatically removed once the client device's driver is
+ * unbound.
+ *
+ * Return: Returns zero on succes, %-ENXIO if the SAN interface has not been
+ * set up yet, and %-ENOMEM if device link creation failed.
+ */
+int san_client_link(struct device *client)
+{
+ const u32 flags = DL_FLAG_PM_RUNTIME | DL_FLAG_AUTOREMOVE_CONSUMER;
+ struct device_link *link;
+
+ down_read(&san_rqsg_if.lock);
+
+ if (!san_rqsg_if.dev) {
+ up_read(&san_rqsg_if.lock);
+ return -ENXIO;
+ }
+
+ link = device_link_add(client, san_rqsg_if.dev, flags);
+ if (!link) {
+ up_read(&san_rqsg_if.lock);
+ return -ENOMEM;
+ }
+
+ if (READ_ONCE(link->status) == DL_STATE_SUPPLIER_UNBIND) {
+ up_read(&san_rqsg_if.lock);
+ return -ENXIO;
+ }
+
+ up_read(&san_rqsg_if.lock);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(san_client_link);
+
+/**
+ * san_dgpu_notifier_register() - Register a SAN dGPU notifier.
+ * @nb: The notifier-block to register.
+ *
+ * Registers a SAN dGPU notifier, receiving any new SAN dGPU events sent from
+ * ACPI. The registered notifier will be called with &struct san_dgpu_event
+ * as notifier data and the command ID of that event as notifier action.
+ */
+int san_dgpu_notifier_register(struct notifier_block *nb)
+{
+ return blocking_notifier_chain_register(&san_rqsg_if.nh, nb);
+}
+EXPORT_SYMBOL_GPL(san_dgpu_notifier_register);
+
+/**
+ * san_dgpu_notifier_unregister() - Unregister a SAN dGPU notifier.
+ * @nb: The notifier-block to unregister.
+ */
+int san_dgpu_notifier_unregister(struct notifier_block *nb)
+{
+ return blocking_notifier_chain_unregister(&san_rqsg_if.nh, nb);
+}
+EXPORT_SYMBOL_GPL(san_dgpu_notifier_unregister);
+
+static int san_dgpu_notifier_call(struct san_dgpu_event *evt)
+{
+ int ret;
+
+ ret = blocking_notifier_call_chain(&san_rqsg_if.nh, evt->command, evt);
+ return notifier_to_errno(ret);
+}
+
+
+/* -- ACPI _DSM event relay. ------------------------------------------------ */
+
+#define SAN_DSM_REVISION 0
+
+static const guid_t SAN_DSM_UUID =
+ GUID_INIT(0x93b666c5, 0x70c6, 0x469f, 0xa2, 0x15, 0x3d,
+ 0x48, 0x7c, 0x91, 0xab, 0x3c);
+
+enum san_dsm_event_fn {
+ SAN_DSM_EVENT_FN_BAT1_STAT = 0x03,
+ SAN_DSM_EVENT_FN_BAT1_INFO = 0x04,
+ SAN_DSM_EVENT_FN_ADP1_STAT = 0x05,
+ SAN_DSM_EVENT_FN_ADP1_INFO = 0x06,
+ SAN_DSM_EVENT_FN_BAT2_STAT = 0x07,
+ SAN_DSM_EVENT_FN_BAT2_INFO = 0x08,
+ SAN_DSM_EVENT_FN_THERMAL = 0x09,
+ SAN_DSM_EVENT_FN_DPTF = 0x0a,
+};
+
+enum sam_event_cid_bat {
+ SAM_EVENT_CID_BAT_BIX = 0x15,
+ SAM_EVENT_CID_BAT_BST = 0x16,
+ SAM_EVENT_CID_BAT_ADP = 0x17,
+ SAM_EVENT_CID_BAT_PROT = 0x18,
+ SAM_EVENT_CID_BAT_DPTF = 0x4f,
+};
+
+enum sam_event_cid_tmp {
+ SAM_EVENT_CID_TMP_TRIP = 0x0b,
+};
+
+struct san_event_work {
+ struct delayed_work work;
+ struct device *dev;
+ struct ssam_event event; // must be last
+};
+
+static int san_acpi_notify_event(struct device *dev, u64 func,
+ union acpi_object *param)
+{
+ acpi_handle san = ACPI_HANDLE(dev);
+ union acpi_object *obj;
+ int status = 0;
+
+ if (!acpi_check_dsm(san, &SAN_DSM_UUID, SAN_DSM_REVISION, 1 << func))
+ return 0;
+
+ dev_dbg(dev, "notify event 0x%02llx\n", func);
+
+ obj = acpi_evaluate_dsm_typed(san, &SAN_DSM_UUID, SAN_DSM_REVISION,
+ func, param, ACPI_TYPE_BUFFER);
+ if (!obj)
+ return -EFAULT;
+
+ if (obj->buffer.length != 1 || obj->buffer.pointer[0] != 0) {
+ dev_err(dev, "got unexpected result from _DSM\n");
+ status = -EPROTO;
+ }
+
+ ACPI_FREE(obj);
+ return status;
+}
+
+static int san_evt_bat_adp(struct device *dev, const struct ssam_event *event)
+{
+ int status;
+
+ status = san_acpi_notify_event(dev, SAN_DSM_EVENT_FN_ADP1_STAT, NULL);
+ if (status)
+ return status;
+
+ /*
+ * Enusre that the battery states get updated correctly.
+ * When the battery is fully charged and an adapter is plugged in, it
+ * sometimes is not updated correctly, instead showing it as charging.
+ * Explicitly trigger battery updates to fix this.
+ */
+
+ status = san_acpi_notify_event(dev, SAN_DSM_EVENT_FN_BAT1_STAT, NULL);
+ if (status)
+ return status;
+
+ return san_acpi_notify_event(dev, SAN_DSM_EVENT_FN_BAT2_STAT, NULL);
+}
+
+static int san_evt_bat_bix(struct device *dev, const struct ssam_event *event)
+{
+ enum san_dsm_event_fn fn;
+
+ if (event->instance_id == 0x02)
+ fn = SAN_DSM_EVENT_FN_BAT2_INFO;
+ else
+ fn = SAN_DSM_EVENT_FN_BAT1_INFO;
+
+ return san_acpi_notify_event(dev, fn, NULL);
+}
+
+static int san_evt_bat_bst(struct device *dev, const struct ssam_event *event)
+{
+ enum san_dsm_event_fn fn;
+
+ if (event->instance_id == 0x02)
+ fn = SAN_DSM_EVENT_FN_BAT2_STAT;
+ else
+ fn = SAN_DSM_EVENT_FN_BAT1_STAT;
+
+ return san_acpi_notify_event(dev, fn, NULL);
+}
+
+static int san_evt_bat_dptf(struct device *dev, const struct ssam_event *event)
+{
+ union acpi_object payload;
+
+ /*
+ * The Surface ACPI expects a buffer and not a package. It specifically
+ * checks for ObjectType (Arg3) == 0x03. This will cause a warning in
+ * acpica/nsarguments.c, but that warning can be safely ignored.
+ */
+ payload.type = ACPI_TYPE_BUFFER;
+ payload.buffer.length = event->length;
+ payload.buffer.pointer = (u8 *)&event->data[0];
+
+ return san_acpi_notify_event(dev, SAN_DSM_EVENT_FN_DPTF, &payload);
+}
+
+static unsigned long san_evt_bat_delay(u8 cid)
+{
+ switch (cid) {
+ case SAM_EVENT_CID_BAT_ADP:
+ /*
+ * Wait for battery state to update before signalling adapter
+ * change.
+ */
+ return msecs_to_jiffies(5000);
+
+ case SAM_EVENT_CID_BAT_BST:
+ /* Ensure we do not miss anything important due to caching. */
+ return msecs_to_jiffies(2000);
+
+ default:
+ return 0;
+ }
+}
+
+static bool san_evt_bat(const struct ssam_event *event, struct device *dev)
+{
+ int status;
+
+ switch (event->command_id) {
+ case SAM_EVENT_CID_BAT_BIX:
+ status = san_evt_bat_bix(dev, event);
+ break;
+
+ case SAM_EVENT_CID_BAT_BST:
+ status = san_evt_bat_bst(dev, event);
+ break;
+
+ case SAM_EVENT_CID_BAT_ADP:
+ status = san_evt_bat_adp(dev, event);
+ break;
+
+ case SAM_EVENT_CID_BAT_PROT:
+ /*
+ * TODO: Implement support for battery protection status change
+ * event.
+ */
+ return true;
+
+ case SAM_EVENT_CID_BAT_DPTF:
+ status = san_evt_bat_dptf(dev, event);
+ break;
+
+ default:
+ return false;
+ }
+
+ if (status)
+ dev_err(dev, "error handling power event (cid = %x)\n",
+ event->command_id);
+
+ return true;
+}
+
+static void san_evt_bat_workfn(struct work_struct *work)
+{
+ struct san_event_work *ev;
+
+ ev = container_of(work, struct san_event_work, work.work);
+ san_evt_bat(&ev->event, ev->dev);
+ kfree(ev);
+}
+
+static u32 san_evt_bat_nf(struct ssam_event_notifier *nf,
+ const struct ssam_event *event)
+{
+ struct san_data *d = to_san_data(nf, nf_bat);
+ struct san_event_work *work;
+ unsigned long delay = san_evt_bat_delay(event->command_id);
+
+ if (delay == 0)
+ return san_evt_bat(event, d->dev) ? SSAM_NOTIF_HANDLED : 0;
+
+ work = kzalloc(sizeof(*work) + event->length, GFP_KERNEL);
+ if (!work)
+ return ssam_notifier_from_errno(-ENOMEM);
+
+ INIT_DELAYED_WORK(&work->work, san_evt_bat_workfn);
+ work->dev = d->dev;
+
+ memcpy(&work->event, event, sizeof(struct ssam_event) + event->length);
+
+ schedule_delayed_work(&work->work, delay);
+ return SSAM_NOTIF_HANDLED;
+}
+
+static int san_evt_tmp_trip(struct device *dev, const struct ssam_event *event)
+{
+ union acpi_object param;
+
+ /*
+ * The Surface ACPI expects an integer and not a package. This will
+ * cause a warning in acpica/nsarguments.c, but that warning can be
+ * safely ignored.
+ */
+ param.type = ACPI_TYPE_INTEGER;
+ param.integer.value = event->instance_id;
+
+ return san_acpi_notify_event(dev, SAN_DSM_EVENT_FN_THERMAL, ¶m);
+}
+
+static bool san_evt_tmp(const struct ssam_event *event, struct device *dev)
+{
+ int status;
+
+ switch (event->command_id) {
+ case SAM_EVENT_CID_TMP_TRIP:
+ status = san_evt_tmp_trip(dev, event);
+ break;
+
+ default:
+ return false;
+ }
+
+ if (status) {
+ dev_err(dev, "error handling thermal event (cid = %x)\n",
+ event->command_id);
+ }
+
+ return true;
+}
+
+static u32 san_evt_tmp_nf(struct ssam_event_notifier *nf,
+ const struct ssam_event *event)
+{
+ struct san_data *d = to_san_data(nf, nf_tmp);
+
+ return san_evt_tmp(event, d->dev) ? SSAM_NOTIF_HANDLED : 0;
+}
+
+
+/* -- ACPI GSB OperationRegion handler -------------------------------------- */
+
+struct gsb_data_in {
+ u8 cv;
+} __packed;
+
+struct gsb_data_rqsx {
+ u8 cv; // command value (san_gsb_request_cv)
+ u8 tc; // target category
+ u8 tid; // target ID
+ u8 iid; // instance ID
+ u8 snc; // expect-response-flag?
+ u8 cid; // command ID
+ u16 cdl; // payload length
+ u8 pld[]; // payload
+} __packed;
+
+struct gsb_data_etwl {
+ u8 cv; // command value (should be 0x02)
+ u8 etw3; // unknown
+ u8 etw4; // unknown
+ u8 msg[]; // error message (ASCIIZ)
+} __packed;
+
+struct gsb_data_out {
+ u8 status; // _SSH communication status
+ u8 len; // _SSH payload length
+ u8 pld[]; // _SSH payload
+} __packed;
+
+union gsb_buffer_data {
+ struct gsb_data_in in; // common input
+ struct gsb_data_rqsx rqsx; // RQSX input
+ struct gsb_data_etwl etwl; // ETWL input
+ struct gsb_data_out out; // output
+};
+
+struct gsb_buffer {
+ u8 status; // GSB AttribRawProcess status
+ u8 len; // GSB AttribRawProcess length
+ union gsb_buffer_data data;
+} __packed;
+
+#define SAN_GSB_MAX_RQSX_PAYLOAD (U8_MAX - 2 - sizeof(struct gsb_data_rqsx))
+#define SAN_GSB_MAX_RESPONSE (U8_MAX - 2 - sizeof(struct gsb_data_out))
+
+#define SAN_GSB_COMMAND 0
+
+enum san_gsb_request_cv {
+ SAN_GSB_REQUEST_CV_RQST = 0x01,
+ SAN_GSB_REQUEST_CV_ETWL = 0x02,
+ SAN_GSB_REQUEST_CV_RQSG = 0x03,
+};
+
+#define SAN_REQUEST_NUM_TRIES 5
+
+static acpi_status san_etwl(struct san_data *d, struct gsb_buffer *b)
+{
+ struct gsb_data_etwl *etwl = &b->data.etwl;
+
+ if (b->len < sizeof(struct gsb_data_etwl)) {
+ dev_err(d->dev, "invalid ETWL package (len = %d)\n", b->len);
+ return AE_OK;
+ }
+
+ dev_err(d->dev, "ETWL(0x%02x, 0x%02x): %.*s\n", etwl->etw3, etwl->etw4,
+ (unsigned int)(b->len - sizeof(struct gsb_data_etwl)),
+ (char *)etwl->msg);
+
+ // indicate success
+ b->status = 0x00;
+ b->len = 0x00;
+
+ return AE_OK;
+}
+
+static struct gsb_data_rqsx *san_validate_rqsx(struct device *dev,
+ const char *type, struct gsb_buffer *b)
+{
+ struct gsb_data_rqsx *rqsx = &b->data.rqsx;
+
+ if (b->len < sizeof(struct gsb_data_rqsx)) {
+ dev_err(dev, "invalid %s package (len = %d)\n", type, b->len);
+ return NULL;
+ }
+
+ if (get_unaligned(&rqsx->cdl) != b->len - sizeof(struct gsb_data_rqsx)) {
+ dev_err(dev, "bogus %s package (len = %d, cdl = %d)\n",
+ type, b->len, get_unaligned(&rqsx->cdl));
+ return NULL;
+ }
+
+ if (get_unaligned(&rqsx->cdl) > SAN_GSB_MAX_RQSX_PAYLOAD) {
+ dev_err(dev, "payload for %s package too large (cdl = %d)\n",
+ type, get_unaligned(&rqsx->cdl));
+ return NULL;
+ }
+
+ return rqsx;
+}
+
+static void gsb_rqsx_response_error(struct gsb_buffer *gsb, int status)
+{
+ gsb->status = 0x00;
+ gsb->len = 0x02;
+ gsb->data.out.status = (u8)(-status);
+ gsb->data.out.len = 0x00;
+}
+
+static void gsb_rqsx_response_success(struct gsb_buffer *gsb, u8 *ptr, size_t len)
+{
+ gsb->status = 0x00;
+ gsb->len = len + 2;
+ gsb->data.out.status = 0x00;
+ gsb->data.out.len = len;
+
+ if (len)
+ memcpy(&gsb->data.out.pld[0], ptr, len);
+}
+
+static acpi_status san_rqst_fixup_suspended(struct san_data *d,
+ struct ssam_request *rqst,
+ struct gsb_buffer *gsb)
+{
+ if (rqst->target_category == SSAM_SSH_TC_BAS && rqst->command_id == 0x0D) {
+ u8 base_state = 1;
+
+ /* Base state quirk:
+ * The base state may be queried from ACPI when the EC is still
+ * suspended. In this case it will return '-EPERM'. This query
+ * will only be triggered from the ACPI lid GPE interrupt, thus
+ * we are either in laptop or studio mode (base status 0x01 or
+ * 0x02). Furthermore, we will only get here if the device (and
+ * EC) have been suspended.
+ *
+ * We now assume that the device is in laptop mode (0x01). This
+ * has the drawback that it will wake the device when unfolding
+ * it in studio mode, but it also allows us to avoid actively
+ * waiting for the EC to wake up, which may incur a notable
+ * delay.
+ */
+
+ dev_dbg(d->dev, "rqst: fixup: base-state quirk\n");
+
+ gsb_rqsx_response_success(gsb, &base_state, sizeof(base_state));
+ return AE_OK;
+ }
+
+ gsb_rqsx_response_error(gsb, -ENXIO);
+ return AE_OK;
+}
+
+static acpi_status san_rqst(struct san_data *d, struct gsb_buffer *buffer)
+{
+ u8 rspbuf[SAN_GSB_MAX_RESPONSE];
+ struct gsb_data_rqsx *gsb_rqst;
+ struct ssam_request rqst;
+ struct ssam_response rsp;
+ int status = 0;
+
+ gsb_rqst = san_validate_rqsx(d->dev, "RQST", buffer);
+ if (!gsb_rqst)
+ return AE_OK;
+
+ rqst.target_category = gsb_rqst->tc;
+ rqst.target_id = gsb_rqst->tid;
+ rqst.command_id = gsb_rqst->cid;
+ rqst.instance_id = gsb_rqst->iid;
+ rqst.flags = gsb_rqst->snc ? SSAM_REQUEST_HAS_RESPONSE : 0;
+ rqst.length = get_unaligned(&gsb_rqst->cdl);
+ rqst.payload = &gsb_rqst->pld[0];
+
+ rsp.capacity = ARRAY_SIZE(rspbuf);
+ rsp.length = 0;
+ rsp.pointer = &rspbuf[0];
+
+ // handle suspended device
+ if (d->dev->power.is_suspended) {
+ dev_warn(d->dev, "rqst: device is suspended, not executing\n");
+ return san_rqst_fixup_suspended(d, &rqst, buffer);
+ }
+
+ status = __ssam_retry(ssam_request_sync_onstack, SAN_REQUEST_NUM_TRIES,
+ d->ctrl, &rqst, &rsp, SAN_GSB_MAX_RQSX_PAYLOAD);
+
+ if (!status) {
+ gsb_rqsx_response_success(buffer, rsp.pointer, rsp.length);
+ } else {
+ dev_err(d->dev, "rqst: failed with error %d\n", status);
+ gsb_rqsx_response_error(buffer, status);
+ }
+
+ return AE_OK;
+}
+
+static acpi_status san_rqsg(struct san_data *d, struct gsb_buffer *buffer)
+{
+ struct gsb_data_rqsx *gsb_rqsg;
+ struct san_dgpu_event evt;
+ int status;
+
+ gsb_rqsg = san_validate_rqsx(d->dev, "RQSG", buffer);
+ if (!gsb_rqsg)
+ return AE_OK;
+
+ evt.category = gsb_rqsg->tc;
+ evt.target = gsb_rqsg->tid;
+ evt.command = gsb_rqsg->cid;
+ evt.instance = gsb_rqsg->iid;
+ evt.length = get_unaligned(&gsb_rqsg->cdl);
+ evt.payload = &gsb_rqsg->pld[0];
+
+ status = san_dgpu_notifier_call(&evt);
+ if (!status) {
+ gsb_rqsx_response_success(buffer, NULL, 0);
+ } else {
+ dev_err(d->dev, "rqsg: failed with error %d\n", status);
+ gsb_rqsx_response_error(buffer, status);
+ }
+
+ return AE_OK;
+}
+
+static acpi_status san_opreg_handler(u32 function,
+ acpi_physical_address command, u32 bits, u64 *value64,
+ void *opreg_context, void *region_context)
+{
+ struct san_data *d = to_san_data(opreg_context, info);
+ struct gsb_buffer *buffer = (struct gsb_buffer *)value64;
+ int accessor_type = (function & 0xFFFF0000) >> 16;
+
+ if (command != SAN_GSB_COMMAND) {
+ dev_warn(d->dev, "unsupported command: 0x%02llx\n", command);
+ return AE_OK;
+ }
+
+ if (accessor_type != ACPI_GSB_ACCESS_ATTRIB_RAW_PROCESS) {
+ dev_err(d->dev, "invalid access type: 0x%02x\n", accessor_type);
+ return AE_OK;
+ }
+
+ // buffer must have at least contain the command-value
+ if (buffer->len == 0) {
+ dev_err(d->dev, "request-package too small\n");
+ return AE_OK;
+ }
+
+ switch (buffer->data.in.cv) {
+ case SAN_GSB_REQUEST_CV_RQST:
+ return san_rqst(d, buffer);
+
+ case SAN_GSB_REQUEST_CV_ETWL:
+ return san_etwl(d, buffer);
+
+ case SAN_GSB_REQUEST_CV_RQSG:
+ return san_rqsg(d, buffer);
+
+ default:
+ dev_warn(d->dev, "unsupported SAN0 request (cv: 0x%02x)\n",
+ buffer->data.in.cv);
+ return AE_OK;
+ }
+}
+
+
+/* -- Driver setup. --------------------------------------------------------- */
+
+static int san_events_register(struct platform_device *pdev)
+{
+ struct san_data *d = platform_get_drvdata(pdev);
+ int status;
+
+ d->nf_bat.base.priority = 1;
+ d->nf_bat.base.fn = san_evt_bat_nf;
+ d->nf_bat.event.reg = SSAM_EVENT_REGISTRY_SAM;
+ d->nf_bat.event.id.target_category = SSAM_SSH_TC_BAT;
+ d->nf_bat.event.id.instance = 0;
+ d->nf_bat.event.mask = SSAM_EVENT_MASK_TARGET;
+ d->nf_bat.event.flags = SSAM_EVENT_SEQUENCED;
+
+ d->nf_tmp.base.priority = 1;
+ d->nf_tmp.base.fn = san_evt_tmp_nf;
+ d->nf_tmp.event.reg = SSAM_EVENT_REGISTRY_SAM;
+ d->nf_tmp.event.id.target_category = SSAM_SSH_TC_TMP;
+ d->nf_tmp.event.id.instance = 0;
+ d->nf_tmp.event.mask = SSAM_EVENT_MASK_TARGET;
+ d->nf_tmp.event.flags = SSAM_EVENT_SEQUENCED;
+
+ status = ssam_notifier_register(d->ctrl, &d->nf_bat);
+ if (status)
+ return status;
+
+ status = ssam_notifier_register(d->ctrl, &d->nf_tmp);
+ if (status)
+ ssam_notifier_unregister(d->ctrl, &d->nf_bat);
+
+ return status;
+}
+
+static void san_events_unregister(struct platform_device *pdev)
+{
+ struct san_data *d = platform_get_drvdata(pdev);
+
+ ssam_notifier_unregister(d->ctrl, &d->nf_bat);
+ ssam_notifier_unregister(d->ctrl, &d->nf_tmp);
+}
+
+#define san_consumer_printk(level, dev, handle, fmt, ...) \
+do { \
+ char *path = "<error getting consumer path>"; \
+ struct acpi_buffer buffer = { \
+ .length = ACPI_ALLOCATE_BUFFER, \
+ .pointer = NULL, \
+ }; \
+ \
+ if (ACPI_SUCCESS(acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer))) \
+ path = buffer.pointer; \
+ \
+ dev_##level(dev, "[%s]: " fmt, path, ##__VA_ARGS__); \
+ kfree(buffer.pointer); \
+} while (0)
+
+#define san_consumer_dbg(dev, handle, fmt, ...) \
+ san_consumer_printk(dbg, dev, handle, fmt, ##__VA_ARGS__)
+
+#define san_consumer_warn(dev, handle, fmt, ...) \
+ san_consumer_printk(warn, dev, handle, fmt, ##__VA_ARGS__)
+
+static bool is_san_consumer(struct platform_device *pdev, acpi_handle handle)
+{
+ struct acpi_handle_list dep_devices;
+ acpi_handle supplier = ACPI_HANDLE(&pdev->dev);
+ acpi_status status;
+ int i;
+
+ if (!acpi_has_method(handle, "_DEP"))
+ return false;
+
+ status = acpi_evaluate_reference(handle, "_DEP", NULL, &dep_devices);
+ if (ACPI_FAILURE(status)) {
+ san_consumer_dbg(&pdev->dev, handle, "failed to evaluate _DEP\n");
+ return false;
+ }
+
+ for (i = 0; i < dep_devices.count; i++) {
+ if (dep_devices.handles[i] == supplier)
+ return true;
+ }
+
+ return false;
+}
+
+static acpi_status san_consumer_setup(acpi_handle handle, u32 lvl,
+ void *context, void **rv)
+{
+ const u32 flags = DL_FLAG_PM_RUNTIME | DL_FLAG_AUTOREMOVE_SUPPLIER;
+ struct platform_device *pdev = context;
+ struct acpi_device *adev;
+ struct device_link *link;
+
+ if (!is_san_consumer(pdev, handle))
+ return AE_OK;
+
+ // ignore ACPI devices that are not present
+ if (acpi_bus_get_device(handle, &adev) != 0)
+ return AE_OK;
+
+ san_consumer_dbg(&pdev->dev, handle, "creating device link\n");
+
+ // try to set up device links, ignore but log errors
+ link = device_link_add(&adev->dev, &pdev->dev, flags);
+ if (!link) {
+ san_consumer_warn(&pdev->dev, handle,
+ "failed to create device link\n");
+ return AE_OK;
+ }
+
+ return AE_OK;
+}
+
+static int san_consumer_links_setup(struct platform_device *pdev)
+{
+ acpi_status status;
+
+ status = acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
+ ACPI_UINT32_MAX, san_consumer_setup, NULL,
+ pdev, NULL);
+
+ return status ? -EFAULT : 0;
+}
+
+static int san_probe(struct platform_device *pdev)
+{
+ acpi_handle san = ACPI_HANDLE(&pdev->dev);
+ struct ssam_controller *ctrl;
+ struct san_data *data;
+ acpi_status astatus;
+ int status;
+
+ status = ssam_client_bind(&pdev->dev, &ctrl);
+ if (status)
+ return status == -ENXIO ? -EPROBE_DEFER : status;
+
+ status = san_consumer_links_setup(pdev);
+ if (status)
+ return status;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->dev = &pdev->dev;
+ data->ctrl = ctrl;
+
+ platform_set_drvdata(pdev, data);
+
+ astatus = acpi_install_address_space_handler(san, ACPI_ADR_SPACE_GSBUS,
+ &san_opreg_handler, NULL, &data->info);
+ if (ACPI_FAILURE(astatus))
+ return -ENXIO;
+
+ status = san_events_register(pdev);
+ if (status)
+ goto err_enable_events;
+
+ status = san_set_rqsg_interface_device(&pdev->dev);
+ if (status)
+ goto err_install_dev;
+
+ acpi_walk_dep_device_list(san);
+ return 0;
+
+err_install_dev:
+ san_events_unregister(pdev);
+err_enable_events:
+ acpi_remove_address_space_handler(san, ACPI_ADR_SPACE_GSBUS,
+ &san_opreg_handler);
+ return status;
+}
+
+static int san_remove(struct platform_device *pdev)
+{
+ acpi_handle san = ACPI_HANDLE(&pdev->dev);
+
+ san_set_rqsg_interface_device(NULL);
+ acpi_remove_address_space_handler(san, ACPI_ADR_SPACE_GSBUS,
+ &san_opreg_handler);
+ san_events_unregister(pdev);
+
+ /*
+ * We have unregistered our event sources. Now we need to ensure that
+ * all delayed works they may have spawned are run to completion.
+ */
+ flush_scheduled_work();
+
+ return 0;
+}
+
+static const struct acpi_device_id san_match[] = {
+ { "MSHW0091" },
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, san_match);
+
+static struct platform_driver surface_acpi_notify = {
+ .probe = san_probe,
+ .remove = san_remove,
+ .driver = {
+ .name = "surface_acpi_notify",
+ .acpi_match_table = san_match,
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
+ },
+};
+module_platform_driver(surface_acpi_notify);
+
+MODULE_AUTHOR("Maximilian Luz <luzmaximilian@gmail.com>");
+MODULE_DESCRIPTION("Surface ACPI Notify driver for Surface System Aggregator Module");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/surface_acpi_notify.h b/include/linux/surface_acpi_notify.h
new file mode 100644
index 000000000000..8e3e86c7d78c
--- /dev/null
+++ b/include/linux/surface_acpi_notify.h
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Interface for Surface ACPI Notify (SAN) driver.
+ *
+ * Provides access to discrete GPU notifications sent from ACPI via the SAN
+ * driver, which are not handled by this driver directly.
+ *
+ * Copyright (C) 2019-2020 Maximilian Luz <luzmaximilian@gmail.com>
+ */
+
+#ifndef _LINUX_SURFACE_ACPI_NOTIFY_H
+#define _LINUX_SURFACE_ACPI_NOTIFY_H
+
+#include <linux/notifier.h>
+#include <linux/types.h>
+
+/**
+ * struct san_dgpu_event - Discrete GPU ACPI event.
+ * @category: Category of the event.
+ * @target: Target ID of the event source.
+ * @command: Command ID of the event.
+ * @instance: Instance ID of the event source.
+ * @length: Length of the event's payload data (in bytes).
+ * @payload: Pointer to the event's payload data.
+ */
+struct san_dgpu_event {
+ u8 category;
+ u8 target;
+ u8 command;
+ u8 instance;
+ u16 length;
+ u8 *payload;
+};
+
+int san_client_link(struct device *client);
+int san_dgpu_notifier_register(struct notifier_block *nb);
+int san_dgpu_notifier_unregister(struct notifier_block *nb);
+
+#endif /* _LINUX_SURFACE_ACPI_NOTIFY_H */
--
2.29.2
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH 9/9] platform/surface: Add Surface ACPI Notify driver
2020-11-15 19:21 ` [PATCH 9/9] platform/surface: Add Surface ACPI Notify driver Maximilian Luz
@ 2020-11-17 20:09 ` Randy Dunlap
2020-11-17 20:18 ` Maximilian Luz
0 siblings, 1 reply; 10+ messages in thread
From: Randy Dunlap @ 2020-11-17 20:09 UTC (permalink / raw)
To: Maximilian Luz, linux-kernel
Cc: Hans de Goede, Mark Gross, Arnd Bergmann, Greg Kroah-Hartman,
Rafael J . Wysocki, Len Brown, Jonathan Corbet,
Blaž Hrastnik, Dorian Stoll, platform-driver-x86, linux-acpi,
linux-doc
On 11/15/20 11:21 AM, Maximilian Luz wrote:
> diff --git a/drivers/platform/surface/Kconfig b/drivers/platform/surface/Kconfig
> index cecad7a0cb7b..3b0da86546fa 100644
> --- a/drivers/platform/surface/Kconfig
> +++ b/drivers/platform/surface/Kconfig
> @@ -40,6 +40,26 @@ config SURFACE_3_POWER_OPREGION
> This driver provides support for ACPI operation
> region of the Surface 3 battery platform driver.
>
> +config SURFACE_ACPI_NOTIFY
> + tristate "Surface ACPI Notify Driver"
> + depends on ACPI
> + depends on SURFACE_AGGREGATOR
> + help
> + Surface ACPI Notify (SAN) driver for Microsoft Surface devices.
Drop "depends on ACPI" since SURFACE_AGGREGATOR already depends on ACPI.
--
~Randy
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 9/9] platform/surface: Add Surface ACPI Notify driver
2020-11-17 20:09 ` Randy Dunlap
@ 2020-11-17 20:18 ` Maximilian Luz
0 siblings, 0 replies; 10+ messages in thread
From: Maximilian Luz @ 2020-11-17 20:18 UTC (permalink / raw)
To: Randy Dunlap, linux-kernel
Cc: Hans de Goede, Mark Gross, Arnd Bergmann, Greg Kroah-Hartman,
Rafael J . Wysocki, Len Brown, Jonathan Corbet,
Blaž Hrastnik, Dorian Stoll, platform-driver-x86, linux-acpi,
linux-doc
On 11/17/20 9:09 PM, Randy Dunlap wrote:
> On 11/15/20 11:21 AM, Maximilian Luz wrote:
>> diff --git a/drivers/platform/surface/Kconfig b/drivers/platform/surface/Kconfig
>> index cecad7a0cb7b..3b0da86546fa 100644
>> --- a/drivers/platform/surface/Kconfig
>> +++ b/drivers/platform/surface/Kconfig
>> @@ -40,6 +40,26 @@ config SURFACE_3_POWER_OPREGION
>> This driver provides support for ACPI operation
>> region of the Surface 3 battery platform driver.
>>
>> +config SURFACE_ACPI_NOTIFY
>> + tristate "Surface ACPI Notify Driver"
>> + depends on ACPI
>> + depends on SURFACE_AGGREGATOR
>> + help
>> + Surface ACPI Notify (SAN) driver for Microsoft Surface devices.
>
> Drop "depends on ACPI" since SURFACE_AGGREGATOR already depends on ACPI.
Okay, will do that.
Thanks,
Max
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 8/9] platform/surface: Add Surface Aggregator user-space interface
2020-11-15 19:21 ` [PATCH 8/9] platform/surface: Add Surface Aggregator user-space interface Maximilian Luz
@ 2020-11-17 20:36 ` Randy Dunlap
2020-11-17 21:06 ` Maximilian Luz
0 siblings, 1 reply; 10+ messages in thread
From: Randy Dunlap @ 2020-11-17 20:36 UTC (permalink / raw)
To: Maximilian Luz, linux-kernel
Cc: Hans de Goede, Mark Gross, Arnd Bergmann, Greg Kroah-Hartman,
Jonathan Corbet, Blaž Hrastnik, Dorian Stoll, linux-doc,
platform-driver-x86
On 11/15/20 11:21 AM, Maximilian Luz wrote:
> +#define SSAM_CDEV_REQUEST _IOWR(0xA5, 1, struct ssam_cdev_request)
All ioctl major numbers (0xA5) should be documented in
Documentation/userspace-api/ioctl/ioctl-number.rst
Apologies if I missed it somewhere else.
thanks.
--
~Randy
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 8/9] platform/surface: Add Surface Aggregator user-space interface
2020-11-17 20:36 ` Randy Dunlap
@ 2020-11-17 21:06 ` Maximilian Luz
0 siblings, 0 replies; 10+ messages in thread
From: Maximilian Luz @ 2020-11-17 21:06 UTC (permalink / raw)
To: Randy Dunlap, linux-kernel
Cc: Hans de Goede, Mark Gross, Arnd Bergmann, Greg Kroah-Hartman,
Jonathan Corbet, Blaž Hrastnik, Dorian Stoll, linux-doc,
platform-driver-x86
On 11/17/20 9:36 PM, Randy Dunlap wrote:
> On 11/15/20 11:21 AM, Maximilian Luz wrote:
>> +#define SSAM_CDEV_REQUEST _IOWR(0xA5, 1, struct ssam_cdev_request)
>
> All ioctl major numbers (0xA5) should be documented in
> Documentation/userspace-api/ioctl/ioctl-number.rst
>
> Apologies if I missed it somewhere else.
No, I forgot to do that. Will add it for the next revision.
Thanks,
Max
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 0/9] Add support for Microsoft Surface System Aggregator Module
2020-11-15 19:21 [PATCH 0/9] Add support for Microsoft Surface System Aggregator Module Maximilian Luz
` (2 preceding siblings ...)
2020-11-15 19:21 ` [PATCH 9/9] platform/surface: Add Surface ACPI Notify driver Maximilian Luz
@ 2020-11-24 11:59 ` Hans de Goede
2020-11-24 13:43 ` Maximilian Luz
3 siblings, 1 reply; 10+ messages in thread
From: Hans de Goede @ 2020-11-24 11:59 UTC (permalink / raw)
To: Maximilian Luz, linux-kernel
Cc: Mark Gross, Arnd Bergmann, Greg Kroah-Hartman, Rob Herring,
Jiri Slaby, Rafael J . Wysocki, Len Brown, Steven Rostedt,
Ingo Molnar, Masahiro Yamada, Michal Marek, Jonathan Corbet,
Blaž Hrastnik, Dorian Stoll, platform-driver-x86,
linux-serial, linux-acpi, linux-kbuild, linux-doc
Hi,
On 11/15/20 8:21 PM, Maximilian Luz wrote:
> Hello,
>
> N.B.: the following text is mostly a repeat of cover letter from the
> previous RFC for the uninitiated, which can be found at
>
> https://lore.kernel.org/linux-serial/20200923151511.3842150-1-luzmaximilian@gmail.com/
>
> See "Changes" below for an overview of differences between the RFC and
> this patchset. I hope I have addressed all comments from that in this
> version, thank you again for those.
>
> The Surface System Aggregator Module (we'll refer to it as Surface
> Aggregator or SAM below) is an embedded controller (EC) found on various
> Microsoft Surface devices. Specifically, all 4th and later generation
> Surface devices, i.e. Surface Pro 4, Surface Book 1 and later, with the
> exception of the Surface Go series and the Surface Duo. Notably, it
> seems like this EC can also be found on the ARM-based Surface Pro X [1].
<snip>
> This patch-set can also be found at the following repository and
> reference, if you prefer to look at a kernel tree instead of these
> emails:
>
> https://github.com/linux-surface/kernel tags/s/surface-aggregator/v1
>
> Thanks,
> Max
Thank you for your work on this. It would be great if we can get better
support for the Surface line in the mainline kernel.
Since a lot of people have already commented on this series I think that
you have enough feedback to do a v2 addressing that feedback right?
For now I'm going to assume that you will do a v2 addressing the
initial round of comments and not review this myself (IOW I'll review
this when v2 is posted).
Let me know if you see things differently.
Regards,
Hans
> [1]: The Surface Pro X is, however, currently considered unsupported due
> to a lack of test candidates and, as it seems, general lack of
> Linux support on other parts. AFAIK there is an issue preventing
> serial devices from being registered, on which the core driver in
> this series is build on, thus there is no way to even test that at
> this point. I'd be happy to work out any issues regarding SAM on
> the Pro X at some point in the future, provided someone can/wants
> to actually test it.
>
> [2]: https://github.com/linux-surface/surface-aggregator-module
> [3]: https://github.com/linux-surface/linux-surface
>
>
> Note: This patch depends on
>
> [PATCH v4] platform/surface: Create a platform subdirectory for
> Microsoft Surface devices
>
> which can be found at
>
> https://lore.kernel.org/platform-driver-x86/20201009141128.683254-1-luzmaximilian@gmail.com/
>
> and is currently in platform-drivers-x86/for-next.
>
>
> Changes from the previous RFC (overview):
> - move to platform/surface
> - add copyright lines
> - change SPDX identifier to GPL-2.0+ (was GPL-2.0-or-later)
> - change user-space interface from debugfs to misc-device
> - address issues in user-space interface
> - fix typos in commit messages and documentation
> - fix some bugs, address other issues
>
> Changes regarding specific patches (and more details) can be found on
> the individual patch.
>
>
> Maximilian Luz (9):
> platform/surface: Add Surface Aggregator subsystem
> platform/surface: aggregator: Add control packet allocation caching
> platform/surface: aggregator: Add event item allocation caching
> platform/surface: aggregator: Add trace points
> platform/surface: aggregator: Add error injection capabilities
> platform/surface: aggregator: Add dedicated bus and device type
> docs: driver-api: Add Surface Aggregator subsystem documentation
> platform/surface: Add Surface Aggregator user-space interface
> platform/surface: Add Surface ACPI Notify driver
>
> Documentation/driver-api/index.rst | 1 +
> .../surface_aggregator/client-api.rst | 38 +
> .../driver-api/surface_aggregator/client.rst | 394 +++
> .../surface_aggregator/clients/cdev.rst | 85 +
> .../surface_aggregator/clients/index.rst | 21 +
> .../surface_aggregator/clients/san.rst | 44 +
> .../driver-api/surface_aggregator/index.rst | 21 +
> .../surface_aggregator/internal-api.rst | 67 +
> .../surface_aggregator/internal.rst | 50 +
> .../surface_aggregator/overview.rst | 76 +
> .../driver-api/surface_aggregator/ssh.rst | 343 +++
> MAINTAINERS | 13 +
> drivers/platform/surface/Kconfig | 39 +
> drivers/platform/surface/Makefile | 3 +
> drivers/platform/surface/aggregator/Kconfig | 65 +
> drivers/platform/surface/aggregator/Makefile | 17 +
> drivers/platform/surface/aggregator/bus.c | 424 +++
> drivers/platform/surface/aggregator/bus.h | 27 +
> .../platform/surface/aggregator/controller.c | 2557 +++++++++++++++++
> .../platform/surface/aggregator/controller.h | 288 ++
> drivers/platform/surface/aggregator/core.c | 831 ++++++
> .../platform/surface/aggregator/ssh_msgb.h | 201 ++
> .../surface/aggregator/ssh_packet_layer.c | 2009 +++++++++++++
> .../surface/aggregator/ssh_packet_layer.h | 175 ++
> .../platform/surface/aggregator/ssh_parser.c | 229 ++
> .../platform/surface/aggregator/ssh_parser.h | 157 +
> .../surface/aggregator/ssh_request_layer.c | 1254 ++++++++
> .../surface/aggregator/ssh_request_layer.h | 142 +
> drivers/platform/surface/aggregator/trace.h | 625 ++++
> .../platform/surface/surface_acpi_notify.c | 884 ++++++
> .../surface/surface_aggregator_cdev.c | 299 ++
> include/linux/mod_devicetable.h | 18 +
> include/linux/surface_acpi_notify.h | 39 +
> include/linux/surface_aggregator/controller.h | 832 ++++++
> include/linux/surface_aggregator/device.h | 430 +++
> include/linux/surface_aggregator/serial_hub.h | 659 +++++
> include/uapi/linux/surface_aggregator/cdev.h | 58 +
> scripts/mod/devicetable-offsets.c | 8 +
> scripts/mod/file2alias.c | 23 +
> 39 files changed, 13446 insertions(+)
> create mode 100644 Documentation/driver-api/surface_aggregator/client-api.rst
> create mode 100644 Documentation/driver-api/surface_aggregator/client.rst
> create mode 100644 Documentation/driver-api/surface_aggregator/clients/cdev.rst
> create mode 100644 Documentation/driver-api/surface_aggregator/clients/index.rst
> create mode 100644 Documentation/driver-api/surface_aggregator/clients/san.rst
> create mode 100644 Documentation/driver-api/surface_aggregator/index.rst
> create mode 100644 Documentation/driver-api/surface_aggregator/internal-api.rst
> create mode 100644 Documentation/driver-api/surface_aggregator/internal.rst
> create mode 100644 Documentation/driver-api/surface_aggregator/overview.rst
> create mode 100644 Documentation/driver-api/surface_aggregator/ssh.rst
> create mode 100644 drivers/platform/surface/aggregator/Kconfig
> create mode 100644 drivers/platform/surface/aggregator/Makefile
> create mode 100644 drivers/platform/surface/aggregator/bus.c
> create mode 100644 drivers/platform/surface/aggregator/bus.h
> create mode 100644 drivers/platform/surface/aggregator/controller.c
> create mode 100644 drivers/platform/surface/aggregator/controller.h
> create mode 100644 drivers/platform/surface/aggregator/core.c
> create mode 100644 drivers/platform/surface/aggregator/ssh_msgb.h
> create mode 100644 drivers/platform/surface/aggregator/ssh_packet_layer.c
> create mode 100644 drivers/platform/surface/aggregator/ssh_packet_layer.h
> create mode 100644 drivers/platform/surface/aggregator/ssh_parser.c
> create mode 100644 drivers/platform/surface/aggregator/ssh_parser.h
> create mode 100644 drivers/platform/surface/aggregator/ssh_request_layer.c
> create mode 100644 drivers/platform/surface/aggregator/ssh_request_layer.h
> create mode 100644 drivers/platform/surface/aggregator/trace.h
> create mode 100644 drivers/platform/surface/surface_acpi_notify.c
> create mode 100644 drivers/platform/surface/surface_aggregator_cdev.c
> create mode 100644 include/linux/surface_acpi_notify.h
> create mode 100644 include/linux/surface_aggregator/controller.h
> create mode 100644 include/linux/surface_aggregator/device.h
> create mode 100644 include/linux/surface_aggregator/serial_hub.h
> create mode 100644 include/uapi/linux/surface_aggregator/cdev.h
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 0/9] Add support for Microsoft Surface System Aggregator Module
2020-11-24 11:59 ` [PATCH 0/9] Add support for Microsoft Surface System Aggregator Module Hans de Goede
@ 2020-11-24 13:43 ` Maximilian Luz
0 siblings, 0 replies; 10+ messages in thread
From: Maximilian Luz @ 2020-11-24 13:43 UTC (permalink / raw)
To: Hans de Goede, linux-kernel
Cc: Mark Gross, Arnd Bergmann, Greg Kroah-Hartman, Rob Herring,
Jiri Slaby, Rafael J . Wysocki, Len Brown, Steven Rostedt,
Ingo Molnar, Masahiro Yamada, Michal Marek, Jonathan Corbet,
Blaž Hrastnik, Dorian Stoll, platform-driver-x86,
linux-serial, linux-acpi, linux-kbuild, linux-doc
On 11/24/20 12:59 PM, Hans de Goede wrote:
> Hi,
>
> On 11/15/20 8:21 PM, Maximilian Luz wrote:
>> Hello,
>>
>> N.B.: the following text is mostly a repeat of cover letter from the
>> previous RFC for the uninitiated, which can be found at
>>
>> https://lore.kernel.org/linux-serial/20200923151511.3842150-1-luzmaximilian@gmail.com/
>>
>> See "Changes" below for an overview of differences between the RFC and
>> this patchset. I hope I have addressed all comments from that in this
>> version, thank you again for those.
>>
>> The Surface System Aggregator Module (we'll refer to it as Surface
>> Aggregator or SAM below) is an embedded controller (EC) found on various
>> Microsoft Surface devices. Specifically, all 4th and later generation
>> Surface devices, i.e. Surface Pro 4, Surface Book 1 and later, with the
>> exception of the Surface Go series and the Surface Duo. Notably, it
>> seems like this EC can also be found on the ARM-based Surface Pro X [1].
>
> <snip>
>
>> This patch-set can also be found at the following repository and
>> reference, if you prefer to look at a kernel tree instead of these
>> emails:
>>
>> https://github.com/linux-surface/kernel tags/s/surface-aggregator/v1
>>
>> Thanks,
>> Max
>
> Thank you for your work on this. It would be great if we can get better
> support for the Surface line in the mainline kernel.
>
> Since a lot of people have already commented on this series I think that
> you have enough feedback to do a v2 addressing that feedback right?
Yes, I'm already working on it.
> For now I'm going to assume that you will do a v2 addressing the
> initial round of comments and not review this myself (IOW I'll review
> this when v2 is posted).
Sure, no need for you to review v1 at this point.
> Let me know if you see things differently.
Thanks,
Max
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2020-11-24 13:43 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-11-15 19:21 [PATCH 0/9] Add support for Microsoft Surface System Aggregator Module Maximilian Luz
2020-11-15 19:21 ` [PATCH 7/9] docs: driver-api: Add Surface Aggregator subsystem documentation Maximilian Luz
2020-11-15 19:21 ` [PATCH 8/9] platform/surface: Add Surface Aggregator user-space interface Maximilian Luz
2020-11-17 20:36 ` Randy Dunlap
2020-11-17 21:06 ` Maximilian Luz
2020-11-15 19:21 ` [PATCH 9/9] platform/surface: Add Surface ACPI Notify driver Maximilian Luz
2020-11-17 20:09 ` Randy Dunlap
2020-11-17 20:18 ` Maximilian Luz
2020-11-24 11:59 ` [PATCH 0/9] Add support for Microsoft Surface System Aggregator Module Hans de Goede
2020-11-24 13:43 ` Maximilian Luz
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).