* [PATCH net-next v5 1/7] net: ethtool: pse-pd: Expand C33 PSE status with class, power and extended state
2024-06-28 8:31 [PATCH net-next v5 0/7] net: pse-pd: Add new PSE c33 features Kory Maincent
@ 2024-06-28 8:31 ` Kory Maincent
2024-06-28 8:31 ` [PATCH net-next v5 2/7] netlink: specs: Expand the PSE netlink command with C33 new features Kory Maincent
` (5 subsequent siblings)
6 siblings, 0 replies; 13+ messages in thread
From: Kory Maincent @ 2024-06-28 8:31 UTC (permalink / raw)
To: David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Donald Hunter, Oleksij Rempel, Jonathan Corbet
Cc: Thomas Petazzoni, linux-kernel, netdev, Dent Project, kernel,
linux-doc, Kory Maincent
From: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
This update expands the status information provided by ethtool for PSE c33.
It includes details such as the detected class, current power delivered,
and extended state information.
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
---
Change in v2:
- Move on PSE string error messages to ETHTOOL_LINK_EXT_STATE and
ETHTOOL_LINK_EXT_SUBSTATE with fixed enumeration in aim to unify
interface diagnostic.
Change in v3:
- Add ethtool netlink documentation and kdoc.
- Move on to u32 for state and substate.
- Update C33 pse extended state and substate following Oleksij proposal.
Change in v4:
- Made few changes in the c33 pse extended state and substate enumerations.
- Update pse_reply to send extended substate only if extended state is present.
---
Documentation/networking/ethtool-netlink.rst | 37 ++++++
include/linux/ethtool.h | 15 +++
include/linux/pse-pd/pse.h | 8 ++
include/uapi/linux/ethtool.h | 191 +++++++++++++++++++++++++++
include/uapi/linux/ethtool_netlink.h | 4 +
net/ethtool/pse-pd.c | 32 ++++-
6 files changed, 286 insertions(+), 1 deletion(-)
diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst
index 7ec08e903bab..dacbc087b697 100644
--- a/Documentation/networking/ethtool-netlink.rst
+++ b/Documentation/networking/ethtool-netlink.rst
@@ -1738,6 +1738,13 @@ Kernel response contents:
PSE functions.
``ETHTOOL_A_C33_PSE_PW_D_STATUS`` u32 power detection status of the
PoE PSE.
+ ``ETHTOOL_A_C33_PSE_PW_CLASS`` u32 power class of the PoE PSE.
+ ``ETHTOOL_A_C33_PSE_ACTUAL_PW`` u32 actual power drawn on the
+ PoE PSE.
+ ``ETHTOOL_A_C33_PSE_EXT_STATE`` u32 power extended state of the
+ PoE PSE.
+ ``ETHTOOL_A_C33_PSE_EXT_SUBSTATE`` u32 power extended substatus of
+ the PoE PSE.
====================================== ====== =============================
When set, the optional ``ETHTOOL_A_PODL_PSE_ADMIN_STATE`` attribute identifies
@@ -1770,6 +1777,36 @@ The same goes for ``ETHTOOL_A_C33_PSE_ADMIN_PW_D_STATUS`` implementing
.. kernel-doc:: include/uapi/linux/ethtool.h
:identifiers: ethtool_c33_pse_pw_d_status
+When set, the optional ``ETHTOOL_A_C33_PSE_PW_CLASS`` attribute identifies
+the power class of the C33 PSE. It depends on the class negotiated between
+the PSE and the PD. This option is corresponding to ``IEEE 802.3-2022``
+30.9.1.1.8 aPSEPowerClassification.
+
+When set, the optional ``ETHTOOL_A_C33_PSE_ACTUAL_PW`` attribute identifies
+This option is corresponding to ``IEEE 802.3-2022`` 30.9.1.1.23 aPSEActualPower.
+Actual power is reported in mW.
+
+When set, the optional ``ETHTOOL_A_C33_PSE_EXT_STATE`` attribute identifies
+the extended error state of the C33 PSE. Possible values are:
+
+.. kernel-doc:: include/uapi/linux/ethtool.h
+ :identifiers: ethtool_c33_pse_ext_state
+
+When set, the optional ``ETHTOOL_A_C33_PSE_EXT_SUBSTATE`` attribute identifies
+the extended error state of the C33 PSE. Possible values are:
+Possible values are:
+
+.. kernel-doc:: include/uapi/linux/ethtool.h
+ :identifiers: ethtool_c33_pse_ext_substate_class_num_events
+ ethtool_c33_pse_ext_substate_error_condition
+ ethtool_c33_pse_ext_substate_mr_pse_enable
+ ethtool_c33_pse_ext_substate_option_detect_ted
+ ethtool_c33_pse_ext_substate_option_vport_lim
+ ethtool_c33_pse_ext_substate_ovld_detected
+ ethtool_c33_pse_ext_substate_pd_dll_power_type
+ ethtool_c33_pse_ext_substate_power_not_available
+ ethtool_c33_pse_ext_substate_short_detected
+
PSE_SET
=======
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index 959196af7f5a..b5c6b941afaf 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -1157,4 +1157,19 @@ struct ethtool_forced_speed_map {
void
ethtool_forced_speed_maps_init(struct ethtool_forced_speed_map *maps, u32 size);
+
+/* C33 PSE extended state and substate. */
+struct ethtool_c33_pse_ext_state_info {
+ enum ethtool_c33_pse_ext_state c33_pse_ext_state;
+ union {
+ enum ethtool_c33_pse_ext_substate_error_condition error_condition;
+ enum ethtool_c33_pse_ext_substate_mr_pse_enable mr_pse_enable;
+ enum ethtool_c33_pse_ext_substate_option_detect_ted option_detect_ted;
+ enum ethtool_c33_pse_ext_substate_option_vport_lim option_vport_lim;
+ enum ethtool_c33_pse_ext_substate_ovld_detected ovld_detected;
+ enum ethtool_c33_pse_ext_substate_power_not_available power_not_available;
+ enum ethtool_c33_pse_ext_substate_short_detected short_detected;
+ u32 __c33_pse_ext_substate;
+ };
+};
#endif /* _LINUX_ETHTOOL_H */
diff --git a/include/linux/pse-pd/pse.h b/include/linux/pse-pd/pse.h
index 6eec24ffa866..38b9308e5e7a 100644
--- a/include/linux/pse-pd/pse.h
+++ b/include/linux/pse-pd/pse.h
@@ -36,12 +36,20 @@ struct pse_control_config {
* functions. IEEE 802.3-2022 30.9.1.1.2 aPSEAdminState
* @c33_pw_status: power detection status of the PSE.
* IEEE 802.3-2022 30.9.1.1.5 aPSEPowerDetectionStatus:
+ * @c33_pw_class: detected class of a powered PD
+ * IEEE 802.3-2022 30.9.1.1.8 aPSEPowerClassification
+ * @c33_actual_pw: power currently delivered by the PSE in mW
+ * IEEE 802.3-2022 30.9.1.1.23 aPSEActualPower
+ * @c33_ext_state_info: extended state information of the PSE
*/
struct pse_control_status {
enum ethtool_podl_pse_admin_state podl_admin_state;
enum ethtool_podl_pse_pw_d_status podl_pw_status;
enum ethtool_c33_pse_admin_state c33_admin_state;
enum ethtool_c33_pse_pw_d_status c33_pw_status;
+ u32 c33_pw_class;
+ u32 c33_actual_pw;
+ struct ethtool_c33_pse_ext_state_info c33_ext_state_info;
};
/**
diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h
index 8733a3117902..36b488780f20 100644
--- a/include/uapi/linux/ethtool.h
+++ b/include/uapi/linux/ethtool.h
@@ -752,6 +752,197 @@ enum ethtool_module_power_mode {
ETHTOOL_MODULE_POWER_MODE_HIGH,
};
+/**
+ * enum ethtool_c33_pse_ext_state - groups of PSE extended states
+ * functions. IEEE 802.3-2022 33.2.4.4 Variables
+ *
+ * @ETHTOOL_C33_PSE_EXT_STATE_ERROR_CONDITION: Group of error_condition states
+ * @ETHTOOL_C33_PSE_EXT_STATE_MR_MPS_VALID: Group of mr_mps_valid states
+ * @ETHTOOL_C33_PSE_EXT_STATE_MR_PSE_ENABLE: Group of mr_pse_enable states
+ * @ETHTOOL_C33_PSE_EXT_STATE_OPTION_DETECT_TED: Group of option_detect_ted
+ * states
+ * @ETHTOOL_C33_PSE_EXT_STATE_OPTION_VPORT_LIM: Group of option_vport_lim states
+ * @ETHTOOL_C33_PSE_EXT_STATE_OVLD_DETECTED: Group of ovld_detected states
+ * @ETHTOOL_C33_PSE_EXT_STATE_PD_DLL_POWER_TYPE: Group of pd_dll_power_type
+ * states
+ * @ETHTOOL_C33_PSE_EXT_STATE_POWER_NOT_AVAILABLE: Group of power_not_available
+ * states
+ * @ETHTOOL_C33_PSE_EXT_STATE_SHORT_DETECTED: Group of short_detected states
+ */
+enum ethtool_c33_pse_ext_state {
+ ETHTOOL_C33_PSE_EXT_STATE_ERROR_CONDITION = 1,
+ ETHTOOL_C33_PSE_EXT_STATE_MR_MPS_VALID,
+ ETHTOOL_C33_PSE_EXT_STATE_MR_PSE_ENABLE,
+ ETHTOOL_C33_PSE_EXT_STATE_OPTION_DETECT_TED,
+ ETHTOOL_C33_PSE_EXT_STATE_OPTION_VPORT_LIM,
+ ETHTOOL_C33_PSE_EXT_STATE_OVLD_DETECTED,
+ ETHTOOL_C33_PSE_EXT_STATE_PD_DLL_POWER_TYPE,
+ ETHTOOL_C33_PSE_EXT_STATE_POWER_NOT_AVAILABLE,
+ ETHTOOL_C33_PSE_EXT_STATE_SHORT_DETECTED,
+};
+
+/**
+ * enum ethtool_c33_pse_ext_substate_mr_mps_valid - mr_mps_valid states
+ * functions. IEEE 802.3-2022 33.2.4.4 Variables
+ *
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_MPS_VALID_DETECTED_UNDERLOAD: Underload
+ * state
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_MPS_VALID_CONNECTION_OPEN: Port is not
+ * connected
+ *
+ * The PSE monitors either the DC or AC Maintain Power Signature
+ * (MPS, see 33.2.9.1). This variable indicates the presence or absence of
+ * a valid MPS.
+ */
+enum ethtool_c33_pse_ext_substate_mr_mps_valid {
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_MPS_VALID_DETECTED_UNDERLOAD = 1,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_MPS_VALID_CONNECTION_OPEN,
+};
+
+/**
+ * enum ethtool_c33_pse_ext_substate_error_condition - error_condition states
+ * functions. IEEE 802.3-2022 33.2.4.4 Variables
+ *
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_NON_EXISTING_PORT: Non-existing
+ * port number
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_UNDEFINED_PORT: Undefined port
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_INTERNAL_HW_FAULT: Internal
+ * hardware fault
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_COMM_ERROR_AFTER_FORCE_ON:
+ * Communication error after force on
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_UNKNOWN_PORT_STATUS: Unknown
+ * port status
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_HOST_CRASH_TURN_OFF: Host
+ * crash turn off
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_HOST_CRASH_FORCE_SHUTDOWN:
+ * Host crash force shutdown
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_CONFIG_CHANGE: Configuration
+ * change
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_DETECTED_OVER_TEMP: Over
+ * temperature detected
+ *
+ * error_condition is a variable indicating the status of
+ * implementation-specific fault conditions or optionally other system faults
+ * that prevent the PSE from meeting the specifications in Table 33–11 and that
+ * require the PSE not to source power. These error conditions are different
+ * from those monitored by the state diagrams in Figure 33–10.
+ */
+enum ethtool_c33_pse_ext_substate_error_condition {
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_NON_EXISTING_PORT = 1,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_UNDEFINED_PORT,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_INTERNAL_HW_FAULT,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_COMM_ERROR_AFTER_FORCE_ON,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_UNKNOWN_PORT_STATUS,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_HOST_CRASH_TURN_OFF,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_HOST_CRASH_FORCE_SHUTDOWN,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_CONFIG_CHANGE,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_DETECTED_OVER_TEMP,
+};
+
+/**
+ * enum ethtool_c33_pse_ext_substate_mr_pse_enable - mr_pse_enable states
+ * functions. IEEE 802.3-2022 33.2.4.4 Variables
+ *
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_PSE_ENABLE_DISABLE_PIN_ACTIVE: Disable
+ * pin active
+ *
+ * mr_pse_enable is control variable that selects PSE operation and test
+ * functions.
+ */
+enum ethtool_c33_pse_ext_substate_mr_pse_enable {
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_PSE_ENABLE_DISABLE_PIN_ACTIVE = 1,
+};
+
+/**
+ * enum ethtool_c33_pse_ext_substate_option_detect_ted - option_detect_ted
+ * states functions. IEEE 802.3-2022 33.2.4.4 Variables
+ *
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_DETECT_TED_DET_IN_PROCESS: Detection
+ * in process
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_DETECT_TED_CONNECTION_CHECK_ERROR:
+ * Connection check error
+ *
+ * option_detect_ted is a variable indicating if detection can be performed
+ * by the PSE during the ted_timer interval.
+ */
+enum ethtool_c33_pse_ext_substate_option_detect_ted {
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_DETECT_TED_DET_IN_PROCESS = 1,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_DETECT_TED_CONNECTION_CHECK_ERROR,
+};
+
+/**
+ * enum ethtool_c33_pse_ext_substate_option_vport_lim - option_vport_lim states
+ * functions. IEEE 802.3-2022 33.2.4.4 Variables
+ *
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_HIGH_VOLTAGE: Main supply
+ * voltage is high
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_LOW_VOLTAGE: Main supply
+ * voltage is low
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_VOLTAGE_INJECTION: Voltage
+ * injection into the port
+ *
+ * option_vport_lim is an optional variable indicates if VPSE is out of the
+ * operating range during normal operating state.
+ */
+enum ethtool_c33_pse_ext_substate_option_vport_lim {
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_HIGH_VOLTAGE = 1,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_LOW_VOLTAGE,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_VOLTAGE_INJECTION,
+};
+
+/**
+ * enum ethtool_c33_pse_ext_substate_ovld_detected - ovld_detected states
+ * functions. IEEE 802.3-2022 33.2.4.4 Variables
+ *
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OVLD_DETECTED_OVERLOAD: Overload state
+ *
+ * ovld_detected is a variable indicating if the PSE output current has been
+ * in an overload condition (see 33.2.7.6) for at least TCUT of a one-second
+ * sliding time.
+ */
+enum ethtool_c33_pse_ext_substate_ovld_detected {
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_OVLD_DETECTED_OVERLOAD = 1,
+};
+
+/**
+ * enum ethtool_c33_pse_ext_substate_power_not_available - power_not_available
+ * states functions. IEEE 802.3-2022 33.2.4.4 Variables
+ *
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_BUDGET_EXCEEDED: Power
+ * budget exceeded for the controller
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_PORT_PW_LIMIT_EXCEEDS_CONTROLLER_BUDGET:
+ * Configured port power limit exceeded controller power budget
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_PD_REQUEST_EXCEEDS_PORT_LIMIT:
+ * Power request from PD exceeds port limit
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_HW_PW_LIMIT: Power
+ * denied due to Hardware power limit
+ *
+ * power_not_available is a variable that is asserted in an
+ * implementation-dependent manner when the PSE is no longer capable of
+ * sourcing sufficient power to support the attached PD. Sufficient power
+ * is defined by classification; see 33.2.6.
+ */
+enum ethtool_c33_pse_ext_substate_power_not_available {
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_BUDGET_EXCEEDED = 1,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_PORT_PW_LIMIT_EXCEEDS_CONTROLLER_BUDGET,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_PD_REQUEST_EXCEEDS_PORT_LIMIT,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_HW_PW_LIMIT,
+};
+
+/**
+ * enum ethtool_c33_pse_ext_substate_short_detected - short_detected states
+ * functions. IEEE 802.3-2022 33.2.4.4 Variables
+ *
+ * @ETHTOOL_C33_PSE_EXT_SUBSTATE_SHORT_DETECTED_SHORT_CONDITION: Short
+ * condition was detected
+ *
+ * short_detected is a variable indicating if the PSE output current has been
+ * in a short circuit condition for TLIM within a sliding window (see 33.2.7.7).
+ */
+enum ethtool_c33_pse_ext_substate_short_detected {
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_SHORT_DETECTED_SHORT_CONDITION = 1,
+};
+
/**
* enum ethtool_pse_types - Types of PSE controller.
* @ETHTOOL_PSE_UNKNOWN: Type of PSE controller is unknown
diff --git a/include/uapi/linux/ethtool_netlink.h b/include/uapi/linux/ethtool_netlink.h
index d15856c7e001..e11ae4012eb9 100644
--- a/include/uapi/linux/ethtool_netlink.h
+++ b/include/uapi/linux/ethtool_netlink.h
@@ -937,6 +937,10 @@ enum {
ETHTOOL_A_C33_PSE_ADMIN_STATE, /* u32 */
ETHTOOL_A_C33_PSE_ADMIN_CONTROL, /* u32 */
ETHTOOL_A_C33_PSE_PW_D_STATUS, /* u32 */
+ ETHTOOL_A_C33_PSE_PW_CLASS, /* u32 */
+ ETHTOOL_A_C33_PSE_ACTUAL_PW, /* u32 */
+ ETHTOOL_A_C33_PSE_EXT_STATE, /* u32 */
+ ETHTOOL_A_C33_PSE_EXT_SUBSTATE, /* u32 */
/* add new constants above here */
__ETHTOOL_A_PSE_CNT,
diff --git a/net/ethtool/pse-pd.c b/net/ethtool/pse-pd.c
index 2c981d443f27..d2a1c14d789f 100644
--- a/net/ethtool/pse-pd.c
+++ b/net/ethtool/pse-pd.c
@@ -86,7 +86,16 @@ static int pse_reply_size(const struct ethnl_req_info *req_base,
len += nla_total_size(sizeof(u32)); /* _C33_PSE_ADMIN_STATE */
if (st->c33_pw_status > 0)
len += nla_total_size(sizeof(u32)); /* _C33_PSE_PW_D_STATUS */
-
+ if (st->c33_pw_class > 0)
+ len += nla_total_size(sizeof(u32)); /* _C33_PSE_PW_CLASS */
+ if (st->c33_actual_pw > 0)
+ len += nla_total_size(sizeof(u32)); /* _C33_PSE_ACTUAL_PW */
+ if (st->c33_ext_state_info.c33_pse_ext_state > 0) {
+ len += nla_total_size(sizeof(u32)); /* _C33_PSE_EXT_STATE */
+ if (st->c33_ext_state_info.__c33_pse_ext_substate > 0)
+ /* _C33_PSE_EXT_SUBSTATE */
+ len += nla_total_size(sizeof(u32));
+ }
return len;
}
@@ -117,6 +126,27 @@ static int pse_fill_reply(struct sk_buff *skb,
st->c33_pw_status))
return -EMSGSIZE;
+ if (st->c33_pw_class > 0 &&
+ nla_put_u32(skb, ETHTOOL_A_C33_PSE_PW_CLASS,
+ st->c33_pw_class))
+ return -EMSGSIZE;
+
+ if (st->c33_actual_pw > 0 &&
+ nla_put_u32(skb, ETHTOOL_A_C33_PSE_ACTUAL_PW,
+ st->c33_actual_pw))
+ return -EMSGSIZE;
+
+ if (st->c33_ext_state_info.c33_pse_ext_state > 0) {
+ if (nla_put_u32(skb, ETHTOOL_A_C33_PSE_EXT_STATE,
+ st->c33_ext_state_info.c33_pse_ext_state))
+ return -EMSGSIZE;
+
+ if (st->c33_ext_state_info.__c33_pse_ext_substate > 0 &&
+ nla_put_u32(skb, ETHTOOL_A_C33_PSE_EXT_SUBSTATE,
+ st->c33_ext_state_info.__c33_pse_ext_substate))
+ return -EMSGSIZE;
+ }
+
return 0;
}
--
2.34.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH net-next v5 2/7] netlink: specs: Expand the PSE netlink command with C33 new features
2024-06-28 8:31 [PATCH net-next v5 0/7] net: pse-pd: Add new PSE c33 features Kory Maincent
2024-06-28 8:31 ` [PATCH net-next v5 1/7] net: ethtool: pse-pd: Expand C33 PSE status with class, power and extended state Kory Maincent
@ 2024-06-28 8:31 ` Kory Maincent
2024-07-02 13:19 ` Paolo Abeni
2024-06-28 8:31 ` [PATCH net-next v5 3/7] net: pse-pd: pd692x0: Expand ethtool status message Kory Maincent
` (4 subsequent siblings)
6 siblings, 1 reply; 13+ messages in thread
From: Kory Maincent @ 2024-06-28 8:31 UTC (permalink / raw)
To: David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Donald Hunter, Oleksij Rempel, Jonathan Corbet
Cc: Thomas Petazzoni, linux-kernel, netdev, Dent Project, kernel,
linux-doc, Kory Maincent
From: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Expand the c33 PSE attributes with PSE class, extended state information
and power consumption.
./ynl/cli.py --spec netlink/specs/ethtool.yaml --no-schema --do pse-get
--json '{"header":{"dev-name":"eth0"}}'
{'c33-pse-actual-pw': 1700,
'c33-pse-admin-state': 3,
'c33-pse-pw-class': 4,
'c33-pse-pw-d-status': 4,
'header': {'dev-index': 4, 'dev-name': 'eth0'}}
./ynl/cli.py --spec netlink/specs/ethtool.yaml --no-schema --do pse-get
--json '{"header":{"dev-name":"eth0"}}'
{'c33-pse-admin-state': 3,
'c33-pse-ext-state': 'mr-mps-valid',
'c33-pse-ext-substate': 2,
'c33-pse-pw-d-status': 2,
'header': {'dev-index': 4, 'dev-name': 'eth0'}}
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
---
Change in v3:
- Update c33-pse-ext-state and c33-pse-ext-substate to u32
- Add enum for listing c33-pse-ext-state
Change in v4:
- Add name-prefix.
- Use hyphen-case instead of snwke_case.
- Use yaml list format.
- Updated substate list.
---
Documentation/netlink/specs/ethtool.yaml | 36 ++++++++++++++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/Documentation/netlink/specs/ethtool.yaml b/Documentation/netlink/specs/ethtool.yaml
index 683f5c3f30ad..820cff47722d 100644
--- a/Documentation/netlink/specs/ethtool.yaml
+++ b/Documentation/netlink/specs/ethtool.yaml
@@ -20,6 +20,21 @@ definitions:
name: header-flags
type: flags
entries: [ compact-bitsets, omit-reply, stats ]
+ -
+ name: c33-pse-ext-state
+ enum-name:
+ type: enum
+ name-prefix: ethtool-c33-pse-ext-state-
+ entries:
+ - none
+ - error-condition
+ - mr-mps-valid
+ - mr-pse-enable
+ - option-detect-ted
+ - option-vport-lim
+ - ovld-detected
+ - power-not-available
+ - short-detected
attribute-sets:
-
@@ -951,6 +966,23 @@ attribute-sets:
name: c33-pse-pw-d-status
type: u32
name-prefix: ethtool-a-
+ -
+ name: c33-pse-pw-class
+ type: u32
+ name-prefix: ethtool-a-
+ -
+ name: c33-pse-actual-pw
+ type: u32
+ name-prefix: ethtool-a-
+ -
+ name: c33-pse-ext-state
+ type: u32
+ name-prefix: ethtool-a-
+ enum: c33-pse-ext-state
+ -
+ name: c33-pse-ext-substate
+ type: u32
+ name-prefix: ethtool-a-
-
name: rss
attributes:
@@ -1642,6 +1674,10 @@ operations:
- c33-pse-admin-state
- c33-pse-admin-control
- c33-pse-pw-d-status
+ - c33-pse-pw-class
+ - c33-pse-actual-pw
+ - c33-pse-ext-state
+ - c33-pse-ext-substate
dump: *pse-get-op
-
name: pse-set
--
2.34.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* Re: [PATCH net-next v5 2/7] netlink: specs: Expand the PSE netlink command with C33 new features
2024-06-28 8:31 ` [PATCH net-next v5 2/7] netlink: specs: Expand the PSE netlink command with C33 new features Kory Maincent
@ 2024-07-02 13:19 ` Paolo Abeni
0 siblings, 0 replies; 13+ messages in thread
From: Paolo Abeni @ 2024-07-02 13:19 UTC (permalink / raw)
To: Kory Maincent, David S. Miller, Eric Dumazet, Jakub Kicinski,
Donald Hunter, Oleksij Rempel, Jonathan Corbet
Cc: Thomas Petazzoni, linux-kernel, netdev, Dent Project, kernel,
linux-doc
On Fri, 2024-06-28 at 10:31 +0200, Kory Maincent wrote:
> From: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
>
> Expand the c33 PSE attributes with PSE class, extended state information
> and power consumption.
>
> ./ynl/cli.py --spec netlink/specs/ethtool.yaml --no-schema --do pse-get
> --json '{"header":{"dev-name":"eth0"}}'
> {'c33-pse-actual-pw': 1700,
> 'c33-pse-admin-state': 3,
> 'c33-pse-pw-class': 4,
> 'c33-pse-pw-d-status': 4,
> 'header': {'dev-index': 4, 'dev-name': 'eth0'}}
>
> ./ynl/cli.py --spec netlink/specs/ethtool.yaml --no-schema --do pse-get
> --json '{"header":{"dev-name":"eth0"}}'
> {'c33-pse-admin-state': 3,
> 'c33-pse-ext-state': 'mr-mps-valid',
> 'c33-pse-ext-substate': 2,
> 'c33-pse-pw-d-status': 2,
> 'header': {'dev-index': 4, 'dev-name': 'eth0'}}
>
> Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
This does not apply cleanly to net-next due to commit 46fb3ba95b93
("ethtool: Add an interface for flashing transceiver modules'
firmware").
Please rebase and re-submit.
Also it would be great if you could add some documentation to the new
attributes.
Thanks,
Paolo
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH net-next v5 3/7] net: pse-pd: pd692x0: Expand ethtool status message
2024-06-28 8:31 [PATCH net-next v5 0/7] net: pse-pd: Add new PSE c33 features Kory Maincent
2024-06-28 8:31 ` [PATCH net-next v5 1/7] net: ethtool: pse-pd: Expand C33 PSE status with class, power and extended state Kory Maincent
2024-06-28 8:31 ` [PATCH net-next v5 2/7] netlink: specs: Expand the PSE netlink command with C33 new features Kory Maincent
@ 2024-06-28 8:31 ` Kory Maincent
2024-06-28 8:36 ` Oleksij Rempel
2024-06-28 8:31 ` [PATCH net-next v5 4/7] net: pse-pd: Add new power limit get and set c33 features Kory Maincent
` (3 subsequent siblings)
6 siblings, 1 reply; 13+ messages in thread
From: Kory Maincent @ 2024-06-28 8:31 UTC (permalink / raw)
To: David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Donald Hunter, Oleksij Rempel, Jonathan Corbet
Cc: Thomas Petazzoni, linux-kernel, netdev, Dent Project, kernel,
linux-doc, Kory Maincent
From: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
This update expands pd692x0_ethtool_get_status() callback with newly
introduced details such as the detected class, current power delivered,
and extended state information.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
---
Change in v2:
- Move in from string status message to c33_pse_ext_state_info.
Change in v3:
- Update extended state and substate list.
Change in v4:
- Update extended state and substate list.
---
drivers/net/pse-pd/pd692x0.c | 101 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 101 insertions(+)
diff --git a/drivers/net/pse-pd/pd692x0.c b/drivers/net/pse-pd/pd692x0.c
index 820358b71f0f..cce1b7ce044b 100644
--- a/drivers/net/pse-pd/pd692x0.c
+++ b/drivers/net/pse-pd/pd692x0.c
@@ -73,6 +73,7 @@ enum {
PD692X0_MSG_SET_PORT_PARAM,
PD692X0_MSG_GET_PORT_STATUS,
PD692X0_MSG_DOWNLOAD_CMD,
+ PD692X0_MSG_GET_PORT_CLASS,
/* add new message above here */
PD692X0_MSG_CNT
@@ -149,6 +150,12 @@ static const struct pd692x0_msg pd692x0_msg_template_list[PD692X0_MSG_CNT] = {
.data = {0x16, 0x16, 0x99, 0x4e,
0x4e, 0x4e, 0x4e, 0x4e},
},
+ [PD692X0_MSG_GET_PORT_CLASS] = {
+ .key = PD692X0_KEY_REQ,
+ .sub = {0x05, 0xc4},
+ .data = {0x4e, 0x4e, 0x4e, 0x4e,
+ 0x4e, 0x4e, 0x4e, 0x4e},
+ },
};
static u8 pd692x0_build_msg(struct pd692x0_msg *msg, u8 echo)
@@ -435,6 +442,84 @@ static int pd692x0_pi_is_enabled(struct pse_controller_dev *pcdev, int id)
}
}
+struct pd692x0_pse_ext_state_mapping {
+ u32 status_code;
+ enum ethtool_c33_pse_ext_state pse_ext_state;
+ u32 pse_ext_substate;
+};
+
+static const struct pd692x0_pse_ext_state_mapping
+pd692x0_pse_ext_state_map[] = {
+ {0x06, ETHTOOL_C33_PSE_EXT_STATE_OPTION_VPORT_LIM,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_HIGH_VOLTAGE},
+ {0x07, ETHTOOL_C33_PSE_EXT_STATE_OPTION_VPORT_LIM,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_LOW_VOLTAGE},
+ {0x08, ETHTOOL_C33_PSE_EXT_STATE_MR_PSE_ENABLE,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_PSE_ENABLE_DISABLE_PIN_ACTIVE},
+ {0x0C, ETHTOOL_C33_PSE_EXT_STATE_ERROR_CONDITION,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_NON_EXISTING_PORT},
+ {0x11, ETHTOOL_C33_PSE_EXT_STATE_ERROR_CONDITION,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_UNDEFINED_PORT},
+ {0x12, ETHTOOL_C33_PSE_EXT_STATE_ERROR_CONDITION,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_INTERNAL_HW_FAULT},
+ {0x1B, ETHTOOL_C33_PSE_EXT_STATE_OPTION_DETECT_TED,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_DETECT_TED_DET_IN_PROCESS},
+ {0x1C, ETHTOOL_C33_PSE_EXT_STATE_ERROR_CONDITION,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_UNKNOWN_PORT_STATUS},
+ {0x1E, ETHTOOL_C33_PSE_EXT_STATE_MR_MPS_VALID,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_MPS_VALID_DETECTED_UNDERLOAD},
+ {0x1F, ETHTOOL_C33_PSE_EXT_STATE_OVLD_DETECTED,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_OVLD_DETECTED_OVERLOAD},
+ {0x20, ETHTOOL_C33_PSE_EXT_STATE_POWER_NOT_AVAILABLE,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_BUDGET_EXCEEDED},
+ {0x21, ETHTOOL_C33_PSE_EXT_STATE_ERROR_CONDITION,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_INTERNAL_HW_FAULT},
+ {0x22, ETHTOOL_C33_PSE_EXT_STATE_ERROR_CONDITION,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_CONFIG_CHANGE},
+ {0x24, ETHTOOL_C33_PSE_EXT_STATE_OPTION_VPORT_LIM,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_VOLTAGE_INJECTION},
+ {0x25, ETHTOOL_C33_PSE_EXT_STATE_ERROR_CONDITION,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_UNKNOWN_PORT_STATUS},
+ {0x34, ETHTOOL_C33_PSE_EXT_STATE_SHORT_DETECTED,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_SHORT_DETECTED_SHORT_CONDITION},
+ {0x35, ETHTOOL_C33_PSE_EXT_STATE_ERROR_CONDITION,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_DETECTED_OVER_TEMP},
+ {0x36, ETHTOOL_C33_PSE_EXT_STATE_ERROR_CONDITION,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_DETECTED_OVER_TEMP},
+ {0x37, ETHTOOL_C33_PSE_EXT_STATE_ERROR_CONDITION,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_UNKNOWN_PORT_STATUS},
+ {0x3C, ETHTOOL_C33_PSE_EXT_STATE_POWER_NOT_AVAILABLE,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_PORT_PW_LIMIT_EXCEEDS_CONTROLLER_BUDGET},
+ {0x3D, ETHTOOL_C33_PSE_EXT_STATE_POWER_NOT_AVAILABLE,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_PD_REQUEST_EXCEEDS_PORT_LIMIT},
+ {0x41, ETHTOOL_C33_PSE_EXT_STATE_POWER_NOT_AVAILABLE,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_HW_PW_LIMIT},
+ {0x43, ETHTOOL_C33_PSE_EXT_STATE_ERROR_CONDITION,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_UNKNOWN_PORT_STATUS},
+ {0xA7, ETHTOOL_C33_PSE_EXT_STATE_OPTION_DETECT_TED,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_DETECT_TED_CONNECTION_CHECK_ERROR},
+ {0xA8, ETHTOOL_C33_PSE_EXT_STATE_MR_MPS_VALID,
+ ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_MPS_VALID_CONNECTION_OPEN},
+ { /* sentinel */ }
+};
+
+static void
+pd692x0_get_ext_state(struct ethtool_c33_pse_ext_state_info *c33_ext_state_info,
+ u32 status_code)
+{
+ const struct pd692x0_pse_ext_state_mapping *ext_state_map;
+
+ ext_state_map = pd692x0_pse_ext_state_map;
+ while (ext_state_map->status_code) {
+ if (ext_state_map->status_code == status_code) {
+ c33_ext_state_info->c33_pse_ext_state = ext_state_map->pse_ext_state;
+ c33_ext_state_info->__c33_pse_ext_substate = ext_state_map->pse_ext_substate;
+ return;
+ }
+ ext_state_map++;
+ }
+}
+
static int pd692x0_ethtool_get_status(struct pse_controller_dev *pcdev,
unsigned long id,
struct netlink_ext_ack *extack,
@@ -442,6 +527,7 @@ static int pd692x0_ethtool_get_status(struct pse_controller_dev *pcdev,
{
struct pd692x0_priv *priv = to_pd692x0_priv(pcdev);
struct pd692x0_msg msg, buf = {0};
+ u32 class;
int ret;
ret = pd692x0_fw_unavailable(priv);
@@ -471,6 +557,21 @@ static int pd692x0_ethtool_get_status(struct pse_controller_dev *pcdev,
priv->admin_state[id] = status->c33_admin_state;
+ pd692x0_get_ext_state(&status->c33_ext_state_info, buf.sub[0]);
+
+ status->c33_actual_pw = (buf.data[0] << 4 | buf.data[1]) * 100;
+
+ memset(&buf, 0, sizeof(buf));
+ msg = pd692x0_msg_template_list[PD692X0_MSG_GET_PORT_CLASS];
+ msg.sub[2] = id;
+ ret = pd692x0_sendrecv_msg(priv, &msg, &buf);
+ if (ret < 0)
+ return ret;
+
+ class = buf.data[3] >> 4;
+ if (class <= 8)
+ status->c33_pw_class = class;
+
return 0;
}
--
2.34.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* Re: [PATCH net-next v5 3/7] net: pse-pd: pd692x0: Expand ethtool status message
2024-06-28 8:31 ` [PATCH net-next v5 3/7] net: pse-pd: pd692x0: Expand ethtool status message Kory Maincent
@ 2024-06-28 8:36 ` Oleksij Rempel
0 siblings, 0 replies; 13+ messages in thread
From: Oleksij Rempel @ 2024-06-28 8:36 UTC (permalink / raw)
To: Kory Maincent
Cc: David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Donald Hunter, Jonathan Corbet, Thomas Petazzoni, linux-kernel,
netdev, Dent Project, kernel, linux-doc
On Fri, Jun 28, 2024 at 10:31:56AM +0200, Kory Maincent wrote:
> From: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
>
> This update expands pd692x0_ethtool_get_status() callback with newly
> introduced details such as the detected class, current power delivered,
> and extended state information.
>
> Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Thank you!
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH net-next v5 4/7] net: pse-pd: Add new power limit get and set c33 features
2024-06-28 8:31 [PATCH net-next v5 0/7] net: pse-pd: Add new PSE c33 features Kory Maincent
` (2 preceding siblings ...)
2024-06-28 8:31 ` [PATCH net-next v5 3/7] net: pse-pd: pd692x0: Expand ethtool status message Kory Maincent
@ 2024-06-28 8:31 ` Kory Maincent
2024-06-28 8:53 ` Oleksij Rempel
2024-06-28 8:31 ` [PATCH net-next v5 5/7] net: ethtool: Add new power limit get and set features Kory Maincent
` (2 subsequent siblings)
6 siblings, 1 reply; 13+ messages in thread
From: Kory Maincent @ 2024-06-28 8:31 UTC (permalink / raw)
To: David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Donald Hunter, Oleksij Rempel, Jonathan Corbet
Cc: Thomas Petazzoni, linux-kernel, netdev, Dent Project, kernel,
linux-doc, Kory Maincent, Sai Krishna
From: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
This patch add a way to get and set the power limit of a PSE PI.
For that it uses regulator API callbacks wrapper like get_voltage() and
get/set_current_limit() as power is simply V * I.
We used mW unit as defined by the IEEE 802.3-2022 standards.
set_current_limit() uses the voltage return by get_voltage() and the
desired power limit to calculate the current limit. get_voltage() callback
is then mandatory to set the power limit.
get_current_limit() callback is by default looking at a driver callback
and fallback to extracting the current limit from _pse_ethtool_get_status()
if the driver does not set its callback. We prefer let the user the choice
because ethtool_get_status return much more information than the current
limit.
expand pse status with c33_pw_limit_ranges to return the ranges available
to configure the power limit.
Reviewed-by: Sai Krishna <saikrishnag@marvell.com>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
---
Change in v2:
- Use uA and uV instead of mA and mV to have more precision in the power
calculation. Need to use 64bit variables for the calculation.
Change in v4:
- Rename the power limit value to c33_avail_pw_limit.
- Add support for c33_pw_limit_ranges
Change in v5:
- Update an error message and a return value.
---
drivers/net/pse-pd/pse_core.c | 172 +++++++++++++++++++++++++++++++++++++++---
include/linux/pse-pd/pse.h | 43 +++++++++++
2 files changed, 204 insertions(+), 11 deletions(-)
diff --git a/drivers/net/pse-pd/pse_core.c b/drivers/net/pse-pd/pse_core.c
index 795ab264eaf2..16f364b3473b 100644
--- a/drivers/net/pse-pd/pse_core.c
+++ b/drivers/net/pse-pd/pse_core.c
@@ -265,10 +265,113 @@ static int pse_pi_disable(struct regulator_dev *rdev)
return ret;
}
+static int _pse_pi_get_voltage(struct regulator_dev *rdev)
+{
+ struct pse_controller_dev *pcdev = rdev_get_drvdata(rdev);
+ const struct pse_controller_ops *ops;
+ int id;
+
+ ops = pcdev->ops;
+ if (!ops->pi_get_voltage)
+ return -EOPNOTSUPP;
+
+ id = rdev_get_id(rdev);
+ return ops->pi_get_voltage(pcdev, id);
+}
+
+static int pse_pi_get_voltage(struct regulator_dev *rdev)
+{
+ struct pse_controller_dev *pcdev = rdev_get_drvdata(rdev);
+ int ret;
+
+ mutex_lock(&pcdev->lock);
+ ret = _pse_pi_get_voltage(rdev);
+ mutex_unlock(&pcdev->lock);
+
+ return ret;
+}
+
+static int _pse_ethtool_get_status(struct pse_controller_dev *pcdev,
+ int id,
+ struct netlink_ext_ack *extack,
+ struct pse_control_status *status);
+
+static int pse_pi_get_current_limit(struct regulator_dev *rdev)
+{
+ struct pse_controller_dev *pcdev = rdev_get_drvdata(rdev);
+ const struct pse_controller_ops *ops;
+ struct netlink_ext_ack extack = {};
+ struct pse_control_status st = {};
+ int id, uV, ret;
+ s64 tmp_64;
+
+ ops = pcdev->ops;
+ id = rdev_get_id(rdev);
+ mutex_lock(&pcdev->lock);
+ if (ops->pi_get_current_limit) {
+ ret = ops->pi_get_current_limit(pcdev, id);
+ goto out;
+ }
+
+ /* If pi_get_current_limit() callback not populated get voltage
+ * from pi_get_voltage() and power limit from ethtool_get_status()
+ * to calculate current limit.
+ */
+ ret = _pse_pi_get_voltage(rdev);
+ if (!ret) {
+ dev_err(pcdev->dev, "Voltage null\n");
+ ret = -ERANGE;
+ goto out;
+ }
+ if (ret < 0)
+ goto out;
+ uV = ret;
+
+ ret = _pse_ethtool_get_status(pcdev, id, &extack, &st);
+ if (ret)
+ goto out;
+
+ if (!st.c33_avail_pw_limit) {
+ ret = -ENODATA;
+ goto out;
+ }
+
+ tmp_64 = st.c33_avail_pw_limit;
+ tmp_64 *= 1000000000ull;
+ /* uA = mW * 1000000000 / uV */
+ ret = DIV_ROUND_CLOSEST_ULL(tmp_64, uV);
+
+out:
+ mutex_unlock(&pcdev->lock);
+ return ret;
+}
+
+static int pse_pi_set_current_limit(struct regulator_dev *rdev, int min_uA,
+ int max_uA)
+{
+ struct pse_controller_dev *pcdev = rdev_get_drvdata(rdev);
+ const struct pse_controller_ops *ops;
+ int id, ret;
+
+ ops = pcdev->ops;
+ if (!ops->pi_set_current_limit)
+ return -EOPNOTSUPP;
+
+ id = rdev_get_id(rdev);
+ mutex_lock(&pcdev->lock);
+ ret = ops->pi_set_current_limit(pcdev, id, max_uA);
+ mutex_unlock(&pcdev->lock);
+
+ return ret;
+}
+
static const struct regulator_ops pse_pi_ops = {
.is_enabled = pse_pi_is_enabled,
.enable = pse_pi_enable,
.disable = pse_pi_disable,
+ .get_voltage = pse_pi_get_voltage,
+ .get_current_limit = pse_pi_get_current_limit,
+ .set_current_limit = pse_pi_set_current_limit,
};
static int
@@ -298,7 +401,9 @@ devm_pse_pi_regulator_register(struct pse_controller_dev *pcdev,
rdesc->ops = &pse_pi_ops;
rdesc->owner = pcdev->owner;
- rinit_data->constraints.valid_ops_mask = REGULATOR_CHANGE_STATUS;
+ rinit_data->constraints.valid_ops_mask = REGULATOR_CHANGE_STATUS |
+ REGULATOR_CHANGE_CURRENT;
+ rinit_data->constraints.max_uA = MAX_PI_CURRENT;
rinit_data->supply_regulator = "vpwr";
rconfig.dev = pcdev->dev;
@@ -626,6 +731,23 @@ struct pse_control *of_pse_control_get(struct device_node *node)
}
EXPORT_SYMBOL_GPL(of_pse_control_get);
+static int _pse_ethtool_get_status(struct pse_controller_dev *pcdev,
+ int id,
+ struct netlink_ext_ack *extack,
+ struct pse_control_status *status)
+{
+ const struct pse_controller_ops *ops;
+
+ ops = pcdev->ops;
+ if (!ops->ethtool_get_status) {
+ NL_SET_ERR_MSG(extack,
+ "PSE driver does not support status report");
+ return -EOPNOTSUPP;
+ }
+
+ return ops->ethtool_get_status(pcdev, id, extack, status);
+}
+
/**
* pse_ethtool_get_status - get status of PSE control
* @psec: PSE control pointer
@@ -638,19 +760,10 @@ int pse_ethtool_get_status(struct pse_control *psec,
struct netlink_ext_ack *extack,
struct pse_control_status *status)
{
- const struct pse_controller_ops *ops;
int err;
- ops = psec->pcdev->ops;
-
- if (!ops->ethtool_get_status) {
- NL_SET_ERR_MSG(extack,
- "PSE driver does not support status report");
- return -EOPNOTSUPP;
- }
-
mutex_lock(&psec->pcdev->lock);
- err = ops->ethtool_get_status(psec->pcdev, psec->id, extack, status);
+ err = _pse_ethtool_get_status(psec->pcdev, psec->id, extack, status);
mutex_unlock(&psec->pcdev->lock);
return err;
@@ -732,6 +845,43 @@ int pse_ethtool_set_config(struct pse_control *psec,
}
EXPORT_SYMBOL_GPL(pse_ethtool_set_config);
+/**
+ * pse_ethtool_set_pw_limit - set PSE control power limit
+ * @psec: PSE control pointer
+ * @extack: extack for reporting useful error messages
+ * @pw_limit: power limit value in mW
+ *
+ * Return: 0 on success and failure value on error
+ */
+int pse_ethtool_set_pw_limit(struct pse_control *psec,
+ struct netlink_ext_ack *extack,
+ const unsigned int pw_limit)
+{
+ int uV, uA, ret;
+ s64 tmp_64;
+
+ ret = regulator_get_voltage(psec->ps);
+ if (!ret) {
+ NL_SET_ERR_MSG(extack,
+ "Can't calculate the current, PSE voltage read is 0");
+ return -ERANGE;
+ }
+ if (ret < 0) {
+ NL_SET_ERR_MSG(extack,
+ "Error reading PSE voltage");
+ return ret;
+ }
+ uV = ret;
+
+ tmp_64 = pw_limit;
+ tmp_64 *= 1000000000ull;
+ /* uA = mW * 1000000000 / uV */
+ uA = DIV_ROUND_CLOSEST_ULL(tmp_64, uV);
+
+ return regulator_set_current_limit(psec->ps, 0, uA);
+}
+EXPORT_SYMBOL_GPL(pse_ethtool_set_pw_limit);
+
bool pse_has_podl(struct pse_control *psec)
{
return psec->pcdev->types & ETHTOOL_PSE_PODL;
diff --git a/include/linux/pse-pd/pse.h b/include/linux/pse-pd/pse.h
index 38b9308e5e7a..591a53e082e6 100644
--- a/include/linux/pse-pd/pse.h
+++ b/include/linux/pse-pd/pse.h
@@ -9,6 +9,9 @@
#include <linux/list.h>
#include <uapi/linux/ethtool.h>
+/* Maximum current in uA according to IEEE 802.3-2022 Table 145-1 */
+#define MAX_PI_CURRENT 1920000
+
struct phy_device;
struct pse_controller_dev;
@@ -41,6 +44,12 @@ struct pse_control_config {
* @c33_actual_pw: power currently delivered by the PSE in mW
* IEEE 802.3-2022 30.9.1.1.23 aPSEActualPower
* @c33_ext_state_info: extended state information of the PSE
+ * @c33_avail_pw_limit: available power limit of the PSE in mW
+ * IEEE 802.3-2022 145.2.5.4 pse_avail_pwr
+ * @c33_pw_limit_ranges: supported power limit configuration range. The driver
+ * is in charge of the memory allocation.
+ * @c33_pw_limit_nb_ranges: number of supported power limit configuration
+ * ranges
*/
struct pse_control_status {
enum ethtool_podl_pse_admin_state podl_admin_state;
@@ -50,6 +59,9 @@ struct pse_control_status {
u32 c33_pw_class;
u32 c33_actual_pw;
struct ethtool_c33_pse_ext_state_info c33_ext_state_info;
+ u32 c33_avail_pw_limit;
+ struct ethtool_c33_pse_pw_limit_range *c33_pw_limit_ranges;
+ u32 c33_pw_limit_nb_ranges;
};
/**
@@ -61,6 +73,14 @@ struct pse_control_status {
* May also return negative errno.
* @pi_enable: Configure the PSE PI as enabled.
* @pi_disable: Configure the PSE PI as disabled.
+ * @pi_get_voltage: Return voltage similarly to get_voltage regulator
+ * callback.
+ * @pi_get_current_limit: Get the configured current limit similarly to
+ * get_current_limit regulator callback.
+ * @pi_set_current_limit: Configure the current limit similarly to
+ * set_current_limit regulator callback.
+ * Should not return an error in case of MAX_PI_CURRENT
+ * current value set.
*/
struct pse_controller_ops {
int (*ethtool_get_status)(struct pse_controller_dev *pcdev,
@@ -70,6 +90,11 @@ struct pse_controller_ops {
int (*pi_is_enabled)(struct pse_controller_dev *pcdev, int id);
int (*pi_enable)(struct pse_controller_dev *pcdev, int id);
int (*pi_disable)(struct pse_controller_dev *pcdev, int id);
+ int (*pi_get_voltage)(struct pse_controller_dev *pcdev, int id);
+ int (*pi_get_current_limit)(struct pse_controller_dev *pcdev,
+ int id);
+ int (*pi_set_current_limit)(struct pse_controller_dev *pcdev,
+ int id, int max_uA);
};
struct module;
@@ -156,6 +181,11 @@ int pse_ethtool_get_status(struct pse_control *psec,
int pse_ethtool_set_config(struct pse_control *psec,
struct netlink_ext_ack *extack,
const struct pse_control_config *config);
+int pse_ethtool_set_pw_limit(struct pse_control *psec,
+ struct netlink_ext_ack *extack,
+ const unsigned int pw_limit);
+int pse_ethtool_get_pw_limit(struct pse_control *psec,
+ struct netlink_ext_ack *extack);
bool pse_has_podl(struct pse_control *psec);
bool pse_has_c33(struct pse_control *psec);
@@ -185,6 +215,19 @@ static inline int pse_ethtool_set_config(struct pse_control *psec,
return -EOPNOTSUPP;
}
+static inline int pse_ethtool_set_pw_limit(struct pse_control *psec,
+ struct netlink_ext_ack *extack,
+ const unsigned int pw_limit)
+{
+ return -EOPNOTSUPP;
+}
+
+static inline int pse_ethtool_get_pw_limit(struct pse_control *psec,
+ struct netlink_ext_ack *extack)
+{
+ return -EOPNOTSUPP;
+}
+
static inline bool pse_has_podl(struct pse_control *psec)
{
return false;
--
2.34.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* Re: [PATCH net-next v5 4/7] net: pse-pd: Add new power limit get and set c33 features
2024-06-28 8:31 ` [PATCH net-next v5 4/7] net: pse-pd: Add new power limit get and set c33 features Kory Maincent
@ 2024-06-28 8:53 ` Oleksij Rempel
0 siblings, 0 replies; 13+ messages in thread
From: Oleksij Rempel @ 2024-06-28 8:53 UTC (permalink / raw)
To: Kory Maincent
Cc: David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Donald Hunter, Jonathan Corbet, Thomas Petazzoni, linux-kernel,
netdev, Dent Project, kernel, linux-doc, Sai Krishna
On Fri, Jun 28, 2024 at 10:31:57AM +0200, Kory Maincent wrote:
> From: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
>
> This patch add a way to get and set the power limit of a PSE PI.
> For that it uses regulator API callbacks wrapper like get_voltage() and
> get/set_current_limit() as power is simply V * I.
> We used mW unit as defined by the IEEE 802.3-2022 standards.
>
> set_current_limit() uses the voltage return by get_voltage() and the
> desired power limit to calculate the current limit. get_voltage() callback
> is then mandatory to set the power limit.
>
> get_current_limit() callback is by default looking at a driver callback
> and fallback to extracting the current limit from _pse_ethtool_get_status()
> if the driver does not set its callback. We prefer let the user the choice
> because ethtool_get_status return much more information than the current
> limit.
>
> expand pse status with c33_pw_limit_ranges to return the ranges available
> to configure the power limit.
>
> Reviewed-by: Sai Krishna <saikrishnag@marvell.com>
> Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Thank you!
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH net-next v5 5/7] net: ethtool: Add new power limit get and set features
2024-06-28 8:31 [PATCH net-next v5 0/7] net: pse-pd: Add new PSE c33 features Kory Maincent
` (3 preceding siblings ...)
2024-06-28 8:31 ` [PATCH net-next v5 4/7] net: pse-pd: Add new power limit get and set c33 features Kory Maincent
@ 2024-06-28 8:31 ` Kory Maincent
2024-06-28 9:00 ` Oleksij Rempel
2024-06-28 8:31 ` [PATCH net-next v5 6/7] netlink: specs: Expand the PSE netlink command with C33 pw-limit attributes Kory Maincent
2024-06-28 8:32 ` [PATCH net-next v5 7/7] net: pse-pd: pd692x0: Enhance with new current limit and voltage read callbacks Kory Maincent
6 siblings, 1 reply; 13+ messages in thread
From: Kory Maincent @ 2024-06-28 8:31 UTC (permalink / raw)
To: David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Donald Hunter, Oleksij Rempel, Jonathan Corbet
Cc: Thomas Petazzoni, linux-kernel, netdev, Dent Project, kernel,
linux-doc, Kory Maincent
From: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
This patch expands the status information provided by ethtool for PSE c33
with available power limit and available power limit ranges. It also adds
a call to pse_ethtool_set_pw_limit() to configure the PSE control power
limit.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
---
Change in v3:
- Add ethtool netlink documentation.
Change in v4:
- Update documentation
- Add support for c33 pse power limit ranges.
---
Documentation/networking/ethtool-netlink.rst | 64 ++++++++++++++------
include/linux/ethtool.h | 5 ++
include/uapi/linux/ethtool_netlink.h | 8 +++
net/ethtool/pse-pd.c | 89 +++++++++++++++++++++++++---
4 files changed, 141 insertions(+), 25 deletions(-)
diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst
index dacbc087b697..da6c62a9cfd2 100644
--- a/Documentation/networking/ethtool-netlink.rst
+++ b/Documentation/networking/ethtool-netlink.rst
@@ -1728,24 +1728,28 @@ Request contents:
Kernel response contents:
- ====================================== ====== =============================
- ``ETHTOOL_A_PSE_HEADER`` nested reply header
- ``ETHTOOL_A_PODL_PSE_ADMIN_STATE`` u32 Operational state of the PoDL
- PSE functions
- ``ETHTOOL_A_PODL_PSE_PW_D_STATUS`` u32 power detection status of the
- PoDL PSE.
- ``ETHTOOL_A_C33_PSE_ADMIN_STATE`` u32 Operational state of the PoE
- PSE functions.
- ``ETHTOOL_A_C33_PSE_PW_D_STATUS`` u32 power detection status of the
- PoE PSE.
- ``ETHTOOL_A_C33_PSE_PW_CLASS`` u32 power class of the PoE PSE.
- ``ETHTOOL_A_C33_PSE_ACTUAL_PW`` u32 actual power drawn on the
- PoE PSE.
- ``ETHTOOL_A_C33_PSE_EXT_STATE`` u32 power extended state of the
- PoE PSE.
- ``ETHTOOL_A_C33_PSE_EXT_SUBSTATE`` u32 power extended substatus of
- the PoE PSE.
- ====================================== ====== =============================
+ ========================================== ====== =============================
+ ``ETHTOOL_A_PSE_HEADER`` nested reply header
+ ``ETHTOOL_A_PODL_PSE_ADMIN_STATE`` u32 Operational state of the PoDL
+ PSE functions
+ ``ETHTOOL_A_PODL_PSE_PW_D_STATUS`` u32 power detection status of the
+ PoDL PSE.
+ ``ETHTOOL_A_C33_PSE_ADMIN_STATE`` u32 Operational state of the PoE
+ PSE functions.
+ ``ETHTOOL_A_C33_PSE_PW_D_STATUS`` u32 power detection status of the
+ PoE PSE.
+ ``ETHTOOL_A_C33_PSE_PW_CLASS`` u32 power class of the PoE PSE.
+ ``ETHTOOL_A_C33_PSE_ACTUAL_PW`` u32 actual power drawn on the
+ PoE PSE.
+ ``ETHTOOL_A_C33_PSE_EXT_STATE`` u32 power extended state of the
+ PoE PSE.
+ ``ETHTOOL_A_C33_PSE_EXT_SUBSTATE`` u32 power extended substatus of
+ the PoE PSE.
+ ``ETHTOOL_A_C33_PSE_AVAIL_PW_LIMIT`` u32 currently configured power
+ limit of the PoE PSE.
+ ``ETHTOOL_A_C33_PSE_PW_LIMIT_RANGES`` nested Supported power limit
+ configuration ranges.
+ ========================================== ====== =============================
When set, the optional ``ETHTOOL_A_PODL_PSE_ADMIN_STATE`` attribute identifies
the operational state of the PoDL PSE functions. The operational state of the
@@ -1807,6 +1811,16 @@ Possible values are:
ethtool_c33_pse_ext_substate_power_not_available
ethtool_c33_pse_ext_substate_short_detected
+When set, the optional ``ETHTOOL_A_C33_PSE_AVAIL_PW_LIMIT`` attribute
+identifies the C33 PSE power limit in mW.
+
+When set the optional ``ETHTOOL_A_C33_PSE_PW_LIMIT_RANGES`` nested attribute
+identifies the C33 PSE power limit ranges through
+``ETHTOOL_A_C33_PSE_PWR_VAL_LIMIT_RANGE_MIN`` and
+``ETHTOOL_A_C33_PSE_PWR_VAL_LIMIT_RANGE_MAX``.
+If the controller works with fixed classes, the min and max values will be
+equal.
+
PSE_SET
=======
@@ -1818,6 +1832,8 @@ Request contents:
``ETHTOOL_A_PSE_HEADER`` nested request header
``ETHTOOL_A_PODL_PSE_ADMIN_CONTROL`` u32 Control PoDL PSE Admin state
``ETHTOOL_A_C33_PSE_ADMIN_CONTROL`` u32 Control PSE Admin state
+ ``ETHTOOL_A_C33_PSE_AVAIL_PWR_LIMIT`` u32 Control PoE PSE available
+ power limit
====================================== ====== =============================
When set, the optional ``ETHTOOL_A_PODL_PSE_ADMIN_CONTROL`` attribute is used
@@ -1828,6 +1844,18 @@ to control PoDL PSE Admin functions. This option is implementing
The same goes for ``ETHTOOL_A_C33_PSE_ADMIN_CONTROL`` implementing
``IEEE 802.3-2022`` 30.9.1.2.1 acPSEAdminControl.
+When set, the optional ``ETHTOOL_A_C33_PSE_AVAIL_PWR_LIMIT`` attribute is
+used to control the available power value limit for C33 PSE in milliwatts.
+This attribute corresponds to the `pse_available_power` variable described in
+``IEEE 802.3-2022`` 33.2.4.4 Variables and `pse_avail_pwr` in 145.2.5.4
+Variables, which are described in power classes.
+
+It was decided to use milliwatts for this interface to unify it with other
+power monitoring interfaces, which also use milliwatts, and to align with
+various existing products that document power consumption in watts rather than
+classes. If power limit configuration based on classes is needed, the
+conversion can be done in user space, for example by ethtool.
+
RSS_GET
=======
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index b5c6b941afaf..ab28d5b62594 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -1172,4 +1172,9 @@ struct ethtool_c33_pse_ext_state_info {
u32 __c33_pse_ext_substate;
};
};
+
+struct ethtool_c33_pse_pw_limit_range {
+ u32 min;
+ u32 max;
+};
#endif /* _LINUX_ETHTOOL_H */
diff --git a/include/uapi/linux/ethtool_netlink.h b/include/uapi/linux/ethtool_netlink.h
index e11ae4012eb9..3c6c77a94bf5 100644
--- a/include/uapi/linux/ethtool_netlink.h
+++ b/include/uapi/linux/ethtool_netlink.h
@@ -928,6 +928,12 @@ enum {
};
/* Power Sourcing Equipment */
+enum {
+ ETHTOOL_A_C33_PSE_PW_LIMIT_UNSPEC,
+ ETHTOOL_A_C33_PSE_PW_LIMIT_MIN, /* u32 */
+ ETHTOOL_A_C33_PSE_PW_LIMIT_MAX, /* u32 */
+};
+
enum {
ETHTOOL_A_PSE_UNSPEC,
ETHTOOL_A_PSE_HEADER, /* nest - _A_HEADER_* */
@@ -941,6 +947,8 @@ enum {
ETHTOOL_A_C33_PSE_ACTUAL_PW, /* u32 */
ETHTOOL_A_C33_PSE_EXT_STATE, /* u32 */
ETHTOOL_A_C33_PSE_EXT_SUBSTATE, /* u32 */
+ ETHTOOL_A_C33_PSE_AVAIL_PW_LIMIT, /* u32 */
+ ETHTOOL_A_C33_PSE_PW_LIMIT_RANGES, /* nest - _C33_PSE_PW_LIMIT_* */
/* add new constants above here */
__ETHTOOL_A_PSE_CNT,
diff --git a/net/ethtool/pse-pd.c b/net/ethtool/pse-pd.c
index d2a1c14d789f..ba46c9c8b12d 100644
--- a/net/ethtool/pse-pd.c
+++ b/net/ethtool/pse-pd.c
@@ -96,9 +96,46 @@ static int pse_reply_size(const struct ethnl_req_info *req_base,
/* _C33_PSE_EXT_SUBSTATE */
len += nla_total_size(sizeof(u32));
}
+ if (st->c33_avail_pw_limit > 0)
+ /* _C33_AVAIL_PSE_PW_LIMIT */
+ len += nla_total_size(sizeof(u32));
+ if (st->c33_pw_limit_nb_ranges > 0)
+ /* _C33_PSE_PW_LIMIT_RANGES */
+ len += st->c33_pw_limit_nb_ranges *
+ (nla_total_size(0) +
+ nla_total_size(sizeof(u32)) * 2);
+
return len;
}
+static int pse_put_pw_limit_ranges(struct sk_buff *skb,
+ const struct pse_control_status *st)
+{
+ const struct ethtool_c33_pse_pw_limit_range *pw_limit_ranges;
+ int i;
+
+ pw_limit_ranges = st->c33_pw_limit_ranges;
+ for (i = 0; i < st->c33_pw_limit_nb_ranges; i++) {
+ struct nlattr *nest;
+
+ nest = nla_nest_start(skb, ETHTOOL_A_C33_PSE_PW_LIMIT_RANGES);
+ if (!nest)
+ return -EMSGSIZE;
+
+ if (nla_put_u32(skb, ETHTOOL_A_C33_PSE_PW_LIMIT_MIN,
+ pw_limit_ranges->min) ||
+ nla_put_u32(skb, ETHTOOL_A_C33_PSE_PW_LIMIT_MAX,
+ pw_limit_ranges->max)) {
+ nla_nest_cancel(skb, nest);
+ return -EMSGSIZE;
+ }
+ nla_nest_end(skb, nest);
+ pw_limit_ranges++;
+ }
+
+ return 0;
+}
+
static int pse_fill_reply(struct sk_buff *skb,
const struct ethnl_req_info *req_base,
const struct ethnl_reply_data *reply_base)
@@ -147,9 +184,25 @@ static int pse_fill_reply(struct sk_buff *skb,
return -EMSGSIZE;
}
+ if (st->c33_avail_pw_limit > 0 &&
+ nla_put_u32(skb, ETHTOOL_A_C33_PSE_AVAIL_PW_LIMIT,
+ st->c33_avail_pw_limit))
+ return -EMSGSIZE;
+
+ if (st->c33_pw_limit_nb_ranges > 0 &&
+ pse_put_pw_limit_ranges(skb, st))
+ return -EMSGSIZE;
+
return 0;
}
+static void pse_cleanup_data(struct ethnl_reply_data *reply_base)
+{
+ const struct pse_reply_data *data = PSE_REPDATA(reply_base);
+
+ kfree(data->status.c33_pw_limit_ranges);
+}
+
/* PSE_SET */
const struct nla_policy ethnl_pse_set_policy[ETHTOOL_A_PSE_MAX + 1] = {
@@ -160,6 +213,7 @@ const struct nla_policy ethnl_pse_set_policy[ETHTOOL_A_PSE_MAX + 1] = {
[ETHTOOL_A_C33_PSE_ADMIN_CONTROL] =
NLA_POLICY_RANGE(NLA_U32, ETHTOOL_C33_PSE_ADMIN_STATE_DISABLED,
ETHTOOL_C33_PSE_ADMIN_STATE_ENABLED),
+ [ETHTOOL_A_C33_PSE_AVAIL_PW_LIMIT] = { .type = NLA_U32 },
};
static int
@@ -202,19 +256,39 @@ static int
ethnl_set_pse(struct ethnl_req_info *req_info, struct genl_info *info)
{
struct net_device *dev = req_info->dev;
- struct pse_control_config config = {};
struct nlattr **tb = info->attrs;
struct phy_device *phydev;
+ int ret = 0;
phydev = dev->phydev;
+
+ if (tb[ETHTOOL_A_C33_PSE_AVAIL_PW_LIMIT]) {
+ unsigned int pw_limit;
+
+ pw_limit = nla_get_u32(tb[ETHTOOL_A_C33_PSE_AVAIL_PW_LIMIT]);
+ ret = pse_ethtool_set_pw_limit(phydev->psec, info->extack,
+ pw_limit);
+ if (ret)
+ return ret;
+ }
+
/* These values are already validated by the ethnl_pse_set_policy */
- if (pse_has_podl(phydev->psec))
- config.podl_admin_control = nla_get_u32(tb[ETHTOOL_A_PODL_PSE_ADMIN_CONTROL]);
- if (pse_has_c33(phydev->psec))
- config.c33_admin_control = nla_get_u32(tb[ETHTOOL_A_C33_PSE_ADMIN_CONTROL]);
+ if (tb[ETHTOOL_A_PODL_PSE_ADMIN_CONTROL] ||
+ tb[ETHTOOL_A_C33_PSE_ADMIN_CONTROL]) {
+ struct pse_control_config config = {};
+
+ if (pse_has_podl(phydev->psec))
+ config.podl_admin_control = nla_get_u32(tb[ETHTOOL_A_PODL_PSE_ADMIN_CONTROL]);
+ if (pse_has_c33(phydev->psec))
+ config.c33_admin_control = nla_get_u32(tb[ETHTOOL_A_C33_PSE_ADMIN_CONTROL]);
+
+ ret = pse_ethtool_set_config(phydev->psec, info->extack,
+ &config);
+ if (ret)
+ return ret;
+ }
- /* Return errno directly - PSE has no notification */
- return pse_ethtool_set_config(phydev->psec, info->extack, &config);
+ return ret;
}
const struct ethnl_request_ops ethnl_pse_request_ops = {
@@ -227,6 +301,7 @@ const struct ethnl_request_ops ethnl_pse_request_ops = {
.prepare_data = pse_prepare_data,
.reply_size = pse_reply_size,
.fill_reply = pse_fill_reply,
+ .cleanup_data = pse_cleanup_data,
.set_validate = ethnl_set_pse_validate,
.set = ethnl_set_pse,
--
2.34.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* Re: [PATCH net-next v5 5/7] net: ethtool: Add new power limit get and set features
2024-06-28 8:31 ` [PATCH net-next v5 5/7] net: ethtool: Add new power limit get and set features Kory Maincent
@ 2024-06-28 9:00 ` Oleksij Rempel
0 siblings, 0 replies; 13+ messages in thread
From: Oleksij Rempel @ 2024-06-28 9:00 UTC (permalink / raw)
To: Kory Maincent
Cc: David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Donald Hunter, Jonathan Corbet, Thomas Petazzoni, linux-kernel,
netdev, Dent Project, kernel, linux-doc
On Fri, Jun 28, 2024 at 10:31:58AM +0200, Kory Maincent wrote:
> From: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
>
> This patch expands the status information provided by ethtool for PSE c33
> with available power limit and available power limit ranges. It also adds
> a call to pse_ethtool_set_pw_limit() to configure the PSE control power
> limit.
>
> Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Thank you!
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH net-next v5 6/7] netlink: specs: Expand the PSE netlink command with C33 pw-limit attributes
2024-06-28 8:31 [PATCH net-next v5 0/7] net: pse-pd: Add new PSE c33 features Kory Maincent
` (4 preceding siblings ...)
2024-06-28 8:31 ` [PATCH net-next v5 5/7] net: ethtool: Add new power limit get and set features Kory Maincent
@ 2024-06-28 8:31 ` Kory Maincent
2024-06-28 8:32 ` [PATCH net-next v5 7/7] net: pse-pd: pd692x0: Enhance with new current limit and voltage read callbacks Kory Maincent
6 siblings, 0 replies; 13+ messages in thread
From: Kory Maincent @ 2024-06-28 8:31 UTC (permalink / raw)
To: David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Donald Hunter, Oleksij Rempel, Jonathan Corbet
Cc: Thomas Petazzoni, linux-kernel, netdev, Dent Project, kernel,
linux-doc, Kory Maincent
From: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Expand the c33 PSE attributes with power limit to be able to set and get
the PSE Power Interface power limit.
./ynl/cli.py --spec netlink/specs/ethtool.yaml --no-schema --do pse-get
--json '{"header":{"dev-name":"eth1"}}'
{'c33-pse-actual-pw': 1700,
'c33-pse-admin-state': 3,
'c33-pse-avail-pw-limit': 97500,
'c33-pse-pw-class': 4,
'c33-pse-pw-d-status': 4,
'c33-pse-pw-limit-ranges': [{'max': 18100, 'min': 15000},
{'max': 38000, 'min': 30000},
{'max': 65000, 'min': 60000},
{'max': 97500, 'min': 90000}],
'header': {'dev-index': 5, 'dev-name': 'eth1'}}
./ynl/cli.py --spec netlink/specs/ethtool.yaml --no-schema --do pse-set
--json '{"header":{"dev-name":"eth1"},
"c33-pse-avail-pw-limit":19000}'
None
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
---
Change in v4:
- Add support for c33 pse power limit ranges.
---
Documentation/netlink/specs/ethtool.yaml | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/Documentation/netlink/specs/ethtool.yaml b/Documentation/netlink/specs/ethtool.yaml
index 820cff47722d..411458d97911 100644
--- a/Documentation/netlink/specs/ethtool.yaml
+++ b/Documentation/netlink/specs/ethtool.yaml
@@ -935,6 +935,15 @@ attribute-sets:
-
name: power-mode
type: u8
+ -
+ name: c33-pse-pw-limit
+ attributes:
+ -
+ name: min
+ type: u32
+ -
+ name: max
+ type: u32
-
name: pse
attributes:
@@ -983,6 +992,16 @@ attribute-sets:
name: c33-pse-ext-substate
type: u32
name-prefix: ethtool-a-
+ -
+ name: c33-pse-avail-pw-limit
+ type: u32
+ name-prefix: ethtool-a-
+ -
+ name: c33-pse-pw-limit-ranges
+ name-prefix: ethtool-a-
+ type: nest
+ multi-attr: true
+ nested-attributes: c33-pse-pw-limit
-
name: rss
attributes:
@@ -1678,6 +1697,8 @@ operations:
- c33-pse-actual-pw
- c33-pse-ext-state
- c33-pse-ext-substate
+ - c33-pse-avail-pw-limit
+ - c33-pse-pw-limit-ranges
dump: *pse-get-op
-
name: pse-set
@@ -1691,6 +1712,7 @@ operations:
- header
- podl-pse-admin-control
- c33-pse-admin-control
+ - c33-pse-avail-pw-limit
-
name: rss-get
doc: Get RSS params.
--
2.34.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH net-next v5 7/7] net: pse-pd: pd692x0: Enhance with new current limit and voltage read callbacks
2024-06-28 8:31 [PATCH net-next v5 0/7] net: pse-pd: Add new PSE c33 features Kory Maincent
` (5 preceding siblings ...)
2024-06-28 8:31 ` [PATCH net-next v5 6/7] netlink: specs: Expand the PSE netlink command with C33 pw-limit attributes Kory Maincent
@ 2024-06-28 8:32 ` Kory Maincent
2024-06-28 9:06 ` Oleksij Rempel
6 siblings, 1 reply; 13+ messages in thread
From: Kory Maincent @ 2024-06-28 8:32 UTC (permalink / raw)
To: David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Donald Hunter, Oleksij Rempel, Jonathan Corbet
Cc: Thomas Petazzoni, linux-kernel, netdev, Dent Project, kernel,
linux-doc, Kory Maincent
From: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
This patch expands PSE callbacks with newly introduced
pi_get/set_current_limit() and pi_get_voltage() callback.
It also add the power limit ranges description in the status returned.
The only way to set ps692x0 port power limit is by configure the power
class plus a small power supplement which maximum depends on each class.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
---
Change in v2:
- Use uA and uV instead of mA and mV to have more precision in the power
calculation. Need to use 64bit variables for the calculation.
- Modify the behavior in case of setting the current out of the available
ranges. Report an error now.
Change in v4:
- Add support for c33 pse power limit ranges.
---
drivers/net/pse-pd/pd692x0.c | 218 ++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 216 insertions(+), 2 deletions(-)
diff --git a/drivers/net/pse-pd/pd692x0.c b/drivers/net/pse-pd/pd692x0.c
index cce1b7ce044b..29cc76a66c13 100644
--- a/drivers/net/pse-pd/pd692x0.c
+++ b/drivers/net/pse-pd/pd692x0.c
@@ -74,6 +74,8 @@ enum {
PD692X0_MSG_GET_PORT_STATUS,
PD692X0_MSG_DOWNLOAD_CMD,
PD692X0_MSG_GET_PORT_CLASS,
+ PD692X0_MSG_GET_PORT_MEAS,
+ PD692X0_MSG_GET_PORT_PARAM,
/* add new message above here */
PD692X0_MSG_CNT
@@ -135,7 +137,7 @@ static const struct pd692x0_msg pd692x0_msg_template_list[PD692X0_MSG_CNT] = {
[PD692X0_MSG_SET_PORT_PARAM] = {
.key = PD692X0_KEY_CMD,
.sub = {0x05, 0xc0},
- .data = { 0, 0xff, 0xff, 0xff,
+ .data = { 0xf, 0xff, 0xff, 0xff,
0x4e, 0x4e, 0x4e, 0x4e},
},
[PD692X0_MSG_GET_PORT_STATUS] = {
@@ -156,6 +158,18 @@ static const struct pd692x0_msg pd692x0_msg_template_list[PD692X0_MSG_CNT] = {
.data = {0x4e, 0x4e, 0x4e, 0x4e,
0x4e, 0x4e, 0x4e, 0x4e},
},
+ [PD692X0_MSG_GET_PORT_MEAS] = {
+ .key = PD692X0_KEY_REQ,
+ .sub = {0x05, 0xc5},
+ .data = {0x4e, 0x4e, 0x4e, 0x4e,
+ 0x4e, 0x4e, 0x4e, 0x4e},
+ },
+ [PD692X0_MSG_GET_PORT_PARAM] = {
+ .key = PD692X0_KEY_REQ,
+ .sub = {0x05, 0xc0},
+ .data = {0x4e, 0x4e, 0x4e, 0x4e,
+ 0x4e, 0x4e, 0x4e, 0x4e},
+ },
};
static u8 pd692x0_build_msg(struct pd692x0_msg *msg, u8 echo)
@@ -520,6 +534,106 @@ pd692x0_get_ext_state(struct ethtool_c33_pse_ext_state_info *c33_ext_state_info,
}
}
+struct pd692x0_class_pw {
+ int class;
+ int class_cfg_value;
+ int class_pw;
+ int max_added_class_pw;
+};
+
+#define PD692X0_CLASS_PW_TABLE_SIZE 4
+/* 4/2 pairs class configuration power table in compliance mode.
+ * Need to be arranged in ascending order of power support.
+ */
+static const struct pd692x0_class_pw
+pd692x0_class_pw_table[PD692X0_CLASS_PW_TABLE_SIZE] = {
+ {.class = 3, .class_cfg_value = 0x3, .class_pw = 15000, .max_added_class_pw = 3100},
+ {.class = 4, .class_cfg_value = 0x2, .class_pw = 30000, .max_added_class_pw = 8000},
+ {.class = 6, .class_cfg_value = 0x1, .class_pw = 60000, .max_added_class_pw = 5000},
+ {.class = 8, .class_cfg_value = 0x0, .class_pw = 90000, .max_added_class_pw = 7500},
+};
+
+static int pd692x0_pi_get_pw_from_table(int op_mode, int added_pw)
+{
+ const struct pd692x0_class_pw *pw_table;
+ int i;
+
+ pw_table = pd692x0_class_pw_table;
+ for (i = 0; i < PD692X0_CLASS_PW_TABLE_SIZE; i++, pw_table++) {
+ if (pw_table->class_cfg_value == op_mode)
+ return pw_table->class_pw + added_pw * 100;
+ }
+
+ return -ERANGE;
+}
+
+static int pd692x0_pi_set_pw_from_table(struct device *dev,
+ struct pd692x0_msg *msg, int pw)
+{
+ const struct pd692x0_class_pw *pw_table;
+ int i;
+
+ pw_table = pd692x0_class_pw_table;
+ if (pw < pw_table->class_pw) {
+ dev_err(dev,
+ "Power limit %dmW not supported. Ranges minimal available: [%d-%d]\n",
+ pw,
+ pw_table->class_pw,
+ pw_table->class_pw + pw_table->max_added_class_pw);
+ return -ERANGE;
+ }
+
+ for (i = 0; i < PD692X0_CLASS_PW_TABLE_SIZE; i++, pw_table++) {
+ if (pw > (pw_table->class_pw + pw_table->max_added_class_pw))
+ continue;
+
+ if (pw < pw_table->class_pw) {
+ dev_err(dev,
+ "Power limit %dmW not supported. Ranges availables: [%d-%d] or [%d-%d]\n",
+ pw,
+ (pw_table - 1)->class_pw,
+ (pw_table - 1)->class_pw + (pw_table - 1)->max_added_class_pw,
+ pw_table->class_pw,
+ pw_table->class_pw + pw_table->max_added_class_pw);
+ return -ERANGE;
+ }
+
+ msg->data[2] = pw_table->class_cfg_value;
+ msg->data[3] = (pw - pw_table->class_pw) / 100;
+ return 0;
+ }
+
+ pw_table--;
+ dev_warn(dev,
+ "Power limit %dmW not supported. Set to highest power limit %dmW\n",
+ pw, pw_table->class_pw + pw_table->max_added_class_pw);
+ msg->data[2] = pw_table->class_cfg_value;
+ msg->data[3] = pw_table->max_added_class_pw / 100;
+ return 0;
+}
+
+static int
+pd692x0_pi_get_pw_ranges(struct pse_control_status *st)
+{
+ const struct pd692x0_class_pw *pw_table;
+ int i;
+
+ pw_table = pd692x0_class_pw_table;
+ st->c33_pw_limit_ranges = kcalloc(PD692X0_CLASS_PW_TABLE_SIZE,
+ sizeof(struct ethtool_c33_pse_pw_limit_range),
+ GFP_KERNEL);
+ if (!st->c33_pw_limit_ranges)
+ return -ENOMEM;
+
+ for (i = 0; i < PD692X0_CLASS_PW_TABLE_SIZE; i++, pw_table++) {
+ st->c33_pw_limit_ranges[i].min = pw_table->class_pw;
+ st->c33_pw_limit_ranges[i].max = pw_table->class_pw + pw_table->max_added_class_pw;
+ }
+
+ st->c33_pw_limit_nb_ranges = i;
+ return 0;
+}
+
static int pd692x0_ethtool_get_status(struct pse_controller_dev *pcdev,
unsigned long id,
struct netlink_ext_ack *extack,
@@ -558,9 +672,20 @@ static int pd692x0_ethtool_get_status(struct pse_controller_dev *pcdev,
priv->admin_state[id] = status->c33_admin_state;
pd692x0_get_ext_state(&status->c33_ext_state_info, buf.sub[0]);
-
status->c33_actual_pw = (buf.data[0] << 4 | buf.data[1]) * 100;
+ msg = pd692x0_msg_template_list[PD692X0_MSG_GET_PORT_PARAM];
+ msg.sub[2] = id;
+ memset(&buf, 0, sizeof(buf));
+ ret = pd692x0_sendrecv_msg(priv, &msg, &buf);
+ if (ret < 0)
+ return ret;
+
+ ret = pd692x0_pi_get_pw_from_table(buf.data[0], buf.data[1]);
+ if (ret < 0)
+ return ret;
+ status->c33_avail_pw_limit = ret;
+
memset(&buf, 0, sizeof(buf));
msg = pd692x0_msg_template_list[PD692X0_MSG_GET_PORT_CLASS];
msg.sub[2] = id;
@@ -572,6 +697,10 @@ static int pd692x0_ethtool_get_status(struct pse_controller_dev *pcdev,
if (class <= 8)
status->c33_pw_class = class;
+ ret = pd692x0_pi_get_pw_ranges(status);
+ if (ret < 0)
+ return ret;
+
return 0;
}
@@ -850,12 +979,97 @@ static int pd692x0_setup_pi_matrix(struct pse_controller_dev *pcdev)
return ret;
}
+static int pd692x0_pi_get_voltage(struct pse_controller_dev *pcdev, int id)
+{
+ struct pd692x0_priv *priv = to_pd692x0_priv(pcdev);
+ struct pd692x0_msg msg, buf = {0};
+ int ret;
+
+ ret = pd692x0_fw_unavailable(priv);
+ if (ret)
+ return ret;
+
+ msg = pd692x0_msg_template_list[PD692X0_MSG_GET_PORT_MEAS];
+ msg.sub[2] = id;
+ ret = pd692x0_sendrecv_msg(priv, &msg, &buf);
+ if (ret < 0)
+ return ret;
+
+ /* Convert 0.1V unit to uV */
+ return (buf.sub[0] << 8 | buf.sub[1]) * 100000;
+}
+
+static int pd692x0_pi_get_current_limit(struct pse_controller_dev *pcdev,
+ int id)
+{
+ struct pd692x0_priv *priv = to_pd692x0_priv(pcdev);
+ struct pd692x0_msg msg, buf = {0};
+ int mW, uV, uA, ret;
+ s64 tmp_64;
+
+ msg = pd692x0_msg_template_list[PD692X0_MSG_GET_PORT_PARAM];
+ msg.sub[2] = id;
+ ret = pd692x0_sendrecv_msg(priv, &msg, &buf);
+ if (ret < 0)
+ return ret;
+
+ ret = pd692x0_pi_get_pw_from_table(buf.data[2], buf.data[3]);
+ if (ret < 0)
+ return ret;
+ mW = ret;
+
+ ret = pd692x0_pi_get_voltage(pcdev, id);
+ if (ret < 0)
+ return ret;
+ uV = ret;
+
+ tmp_64 = mW;
+ tmp_64 *= 1000000000ull;
+ /* uA = mW * 1000000000 / uV */
+ uA = DIV_ROUND_CLOSEST_ULL(tmp_64, uV);
+ return uA;
+}
+
+static int pd692x0_pi_set_current_limit(struct pse_controller_dev *pcdev,
+ int id, int max_uA)
+{
+ struct pd692x0_priv *priv = to_pd692x0_priv(pcdev);
+ struct device *dev = &priv->client->dev;
+ struct pd692x0_msg msg, buf = {0};
+ int uV, ret, mW;
+ s64 tmp_64;
+
+ ret = pd692x0_fw_unavailable(priv);
+ if (ret)
+ return ret;
+
+ ret = pd692x0_pi_get_voltage(pcdev, id);
+ if (ret < 0)
+ return ret;
+ uV = ret;
+
+ msg = pd692x0_msg_template_list[PD692X0_MSG_SET_PORT_PARAM];
+ msg.sub[2] = id;
+ tmp_64 = uV;
+ tmp_64 *= max_uA;
+ /* mW = uV * uA / 1000000000 */
+ mW = DIV_ROUND_CLOSEST_ULL(tmp_64, 1000000000);
+ ret = pd692x0_pi_set_pw_from_table(dev, &msg, mW);
+ if (ret)
+ return ret;
+
+ return pd692x0_sendrecv_msg(priv, &msg, &buf);
+}
+
static const struct pse_controller_ops pd692x0_ops = {
.setup_pi_matrix = pd692x0_setup_pi_matrix,
.ethtool_get_status = pd692x0_ethtool_get_status,
.pi_enable = pd692x0_pi_enable,
.pi_disable = pd692x0_pi_disable,
.pi_is_enabled = pd692x0_pi_is_enabled,
+ .pi_get_voltage = pd692x0_pi_get_voltage,
+ .pi_get_current_limit = pd692x0_pi_get_current_limit,
+ .pi_set_current_limit = pd692x0_pi_set_current_limit,
};
#define PD692X0_FW_LINE_MAX_SZ 0xff
--
2.34.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* Re: [PATCH net-next v5 7/7] net: pse-pd: pd692x0: Enhance with new current limit and voltage read callbacks
2024-06-28 8:32 ` [PATCH net-next v5 7/7] net: pse-pd: pd692x0: Enhance with new current limit and voltage read callbacks Kory Maincent
@ 2024-06-28 9:06 ` Oleksij Rempel
0 siblings, 0 replies; 13+ messages in thread
From: Oleksij Rempel @ 2024-06-28 9:06 UTC (permalink / raw)
To: Kory Maincent
Cc: David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Donald Hunter, Jonathan Corbet, Thomas Petazzoni, linux-kernel,
netdev, Dent Project, kernel, linux-doc
On Fri, Jun 28, 2024 at 10:32:00AM +0200, Kory Maincent wrote:
> From: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
>
> This patch expands PSE callbacks with newly introduced
> pi_get/set_current_limit() and pi_get_voltage() callback.
> It also add the power limit ranges description in the status returned.
> The only way to set ps692x0 port power limit is by configure the power
> class plus a small power supplement which maximum depends on each class.
>
> Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Thank you!
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 13+ messages in thread