[PATCH v6 3/8] dt-bindings: iio: adc: adi,ad4030: Add PWM

[Marcelo Schmitt <marcelo.schmitt@analog.com>]

In setups designed for high speed data rate capture, a PWM is used to
generate the CNV signal that issues data captures from the ADC. Document
the use of a PWM for AD4030 and similar devices.

Reviewed-by: David Lechner <dlechner@baylibre.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
---
 Documentation/devicetree/bindings/iio/adc/adi,ad4030.yaml | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad4030.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad4030.yaml
index a8fee4062d0e..564b6f67a96e 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad4030.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad4030.yaml
@@ -64,6 +64,10 @@ properties:
       The Reset Input (/RST). Used for asynchronous device reset.
     maxItems: 1
 
+  pwms:
+    description: PWM signal connected to the CNV pin.
+    maxItems: 1
+
   interrupts:
     description:
       The BUSY pin is used to signal that the conversions results are available
-- 
2.39.2