linux-doc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Andrew Lunn <andrew@lunn.ch>, Heiner Kallweit <hkallweit1@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>,
	Jonathan Corbet <corbet@lwn.net>,
	linux-doc@vger.kernel.org, Madalin Bucur <madalin.bucur@nxp.com>,
	netdev@vger.kernel.org, Paolo Abeni <pabeni@redhat.com>,
	Sean Anderson <sean.anderson@seco.com>
Subject: [PATCH net-next 1/4] net: phylink: provide mac_get_caps() method
Date: Mon, 16 Oct 2023 16:42:53 +0100	[thread overview]
Message-ID: <E1qsPk5-009wiX-G5@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <ZS1Z5DDfHyjMryYu@shell.armlinux.org.uk>

Provide a new method, mac_get_caps() to get the MAC capabilities for
the specified interface mode. This is for MACs which have special
requirements, such as not supporting half-duplex in certain interface
modes, and will replace the validate() method.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 Documentation/networking/sfp-phylink.rst |  7 +++++++
 drivers/net/phy/phylink.c                | 14 +++++++++++---
 include/linux/phylink.h                  | 15 +++++++++++++++
 3 files changed, 33 insertions(+), 3 deletions(-)

diff --git a/Documentation/networking/sfp-phylink.rst b/Documentation/networking/sfp-phylink.rst
index 55b65f607a64..b069d34d7f5c 100644
--- a/Documentation/networking/sfp-phylink.rst
+++ b/Documentation/networking/sfp-phylink.rst
@@ -200,6 +200,13 @@ this documentation.
    when the in-band link state changes - otherwise the link will never
    come up.
 
+   The :c:func:`mac_get_caps` method is optional, and if provided should
+   return the phylink MAC capabilities that are supported for the passed
+   ``interface`` mode. In general, there is no need to implement this method.
+   Phylink will use these capabilities in combination with permissible
+   capabilities for ``interface`` to determine the allowable ethtool link
+   modes.
+
    The :c:func:`validate` method should mask the supplied supported mask,
    and ``state->advertising`` with the supported ethtool link modes.
    These are the new ethtool link modes, so bitmask operations must be
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 0d7354955d62..f5c2ba15d701 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -657,6 +657,7 @@ static int phylink_validate_mac_and_pcs(struct phylink *pl,
 					unsigned long *supported,
 					struct phylink_link_state *state)
 {
+	unsigned long capabilities;
 	struct phylink_pcs *pcs;
 	int ret;
 
@@ -696,10 +697,17 @@ static int phylink_validate_mac_and_pcs(struct phylink *pl,
 	}
 
 	/* Then validate the link parameters with the MAC */
-	if (pl->mac_ops->validate)
+	if (pl->mac_ops->validate) {
 		pl->mac_ops->validate(pl->config, supported, state);
-	else
-		phylink_generic_validate(pl->config, supported, state);
+	} else {
+		if (pl->mac_ops->mac_get_caps)
+			capabilities = pl->mac_ops->mac_get_caps(pl->config,
+							state->interface);
+		else
+			capabilities = pl->config->mac_capabilities;
+
+		phylink_validate_mask_caps(supported, state, capabilities);
+	}
 
 	return phylink_is_empty_linkmode(supported) ? -EINVAL : 0;
 }
diff --git a/include/linux/phylink.h b/include/linux/phylink.h
index 2b886ea654bb..0798198a09ef 100644
--- a/include/linux/phylink.h
+++ b/include/linux/phylink.h
@@ -228,6 +228,7 @@ void phylink_limit_mac_speed(struct phylink_config *config, u32 max_speed);
 /**
  * struct phylink_mac_ops - MAC operations structure.
  * @validate: Validate and update the link configuration.
+ * @mac_get_caps: Get MAC capabilities for interface mode.
  * @mac_select_pcs: Select a PCS for the interface mode.
  * @mac_prepare: prepare for a major reconfiguration of the interface.
  * @mac_config: configure the MAC for the selected mode and state.
@@ -241,6 +242,8 @@ struct phylink_mac_ops {
 	void (*validate)(struct phylink_config *config,
 			 unsigned long *supported,
 			 struct phylink_link_state *state);
+	unsigned long (*mac_get_caps)(struct phylink_config *config,
+				      phy_interface_t interface);
 	struct phylink_pcs *(*mac_select_pcs)(struct phylink_config *config,
 					      phy_interface_t interface);
 	int (*mac_prepare)(struct phylink_config *config, unsigned int mode,
@@ -292,6 +295,18 @@ struct phylink_mac_ops {
  */
 void validate(struct phylink_config *config, unsigned long *supported,
 	      struct phylink_link_state *state);
+/**
+ * mac_get_caps: Get MAC capabilities for interface mode.
+ * @config: a pointer to a &struct phylink_config.
+ * @interface: PHY interface mode.
+ *
+ * Optional method. When not provided, config->mac_capabilities will be used.
+ * When implemented, this returns the MAC capabilities for the specified
+ * interface mode where there is some special handling required by the MAC
+ * driver (e.g. not supporting half-duplex in certain interface modes.)
+ */
+unsigned long mac_get_caps(struct phylink_config *config,
+			   phy_interface_t interface);
 /**
  * mac_select_pcs: Select a PCS for the interface mode.
  * @config: a pointer to a &struct phylink_config.
-- 
2.30.2


  reply	other threads:[~2023-10-16 15:42 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-10-16 15:42 [PATCH net-next 0/4] net: remove last of the phylink validate methods and clean up Russell King (Oracle)
2023-10-16 15:42 ` Russell King (Oracle) [this message]
2023-10-16 15:42 ` [PATCH net-next 2/4] net: fman: convert to .mac_get_caps() Russell King (Oracle)
2023-10-16 16:23   ` Sean Anderson
2023-10-16 15:43 ` [PATCH net-next 3/4] net: phylink: remove .validate() method Russell King (Oracle)
2023-10-16 15:43 ` [PATCH net-next 4/4] net: phylink: remove a bunch of unused validation methods Russell King (Oracle)
2023-10-18  1:00 ` [PATCH net-next 0/4] net: remove last of the phylink validate methods and clean up patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1qsPk5-009wiX-G5@rmk-PC.armlinux.org.uk \
    --to=rmk+kernel@armlinux.org.uk \
    --cc=andrew@lunn.ch \
    --cc=corbet@lwn.net \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=hkallweit1@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=madalin.bucur@nxp.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=sean.anderson@seco.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).