* [PATCH v15 1/6] iommu: Deprecate Intel and AMD cmdline methods to enable strict mode
2021-07-12 11:12 [PATCH v15 0/6] iommu: Enhance IOMMU default DMA mode build options John Garry
@ 2021-07-12 11:12 ` John Garry
2021-07-12 11:12 ` [PATCH v15 2/6] iommu: Print strict or lazy mode at init time John Garry
` (5 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: John Garry @ 2021-07-12 11:12 UTC (permalink / raw)
To: joro, will, dwmw2, baolu.lu, robin.murphy, corbet
Cc: linux-kernel, iommu, linuxarm, thunder.leizhen, chenxiang66,
linux-doc, dianders, John Garry
Now that the x86 drivers support iommu.strict, deprecate the custom
methods.
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
---
Documentation/admin-guide/kernel-parameters.txt | 9 ++-------
drivers/iommu/amd/init.c | 4 +++-
drivers/iommu/intel/iommu.c | 1 +
3 files changed, 6 insertions(+), 8 deletions(-)
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index bdb22006f713..a04d2748c99a 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -290,10 +290,7 @@
amd_iommu= [HW,X86-64]
Pass parameters to the AMD IOMMU driver in the system.
Possible values are:
- fullflush - enable flushing of IO/TLB entries when
- they are unmapped. Otherwise they are
- flushed before they will be reused, which
- is a lot of faster
+ fullflush - Deprecated, equivalent to iommu.strict=1
off - do not initialize any AMD IOMMU found in
the system
force_isolation - Force device isolation for all
@@ -1944,9 +1941,7 @@
this case, gfx device will use physical address for
DMA.
strict [Default Off]
- With this option on every unmap_single operation will
- result in a hardware IOTLB flush operation as opposed
- to batching them for performance.
+ Deprecated, equivalent to iommu.strict=1.
sp_off [Default Off]
By default, super page will be supported if Intel IOMMU
has the capability. With this option, super page will
diff --git a/drivers/iommu/amd/init.c b/drivers/iommu/amd/init.c
index 46280e6e1535..3a2fb805f11e 100644
--- a/drivers/iommu/amd/init.c
+++ b/drivers/iommu/amd/init.c
@@ -3098,8 +3098,10 @@ static int __init parse_amd_iommu_intr(char *str)
static int __init parse_amd_iommu_options(char *str)
{
for (; *str; ++str) {
- if (strncmp(str, "fullflush", 9) == 0)
+ if (strncmp(str, "fullflush", 9) == 0) {
+ pr_warn("amd_iommu=fullflush deprecated; use iommu.strict=1 instead\n");
amd_iommu_unmap_flush = true;
+ }
if (strncmp(str, "force_enable", 12) == 0)
amd_iommu_force_enable = true;
if (strncmp(str, "off", 3) == 0)
diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
index a6a07d985709..67c52b60f8de 100644
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -454,6 +454,7 @@ static int __init intel_iommu_setup(char *str)
pr_warn("intel_iommu=forcedac deprecated; use iommu.forcedac instead\n");
iommu_dma_forcedac = true;
} else if (!strncmp(str, "strict", 6)) {
+ pr_warn("intel_iommu=strict deprecated; use iommu.strict=1 instead\n");
pr_info("Disable batched IOTLB flush\n");
intel_iommu_strict = 1;
} else if (!strncmp(str, "sp_off", 6)) {
--
2.26.2
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH v15 2/6] iommu: Print strict or lazy mode at init time
2021-07-12 11:12 [PATCH v15 0/6] iommu: Enhance IOMMU default DMA mode build options John Garry
2021-07-12 11:12 ` [PATCH v15 1/6] iommu: Deprecate Intel and AMD cmdline methods to enable strict mode John Garry
@ 2021-07-12 11:12 ` John Garry
2021-07-12 11:12 ` [PATCH v15 3/6] iommu: Enhance IOMMU default DMA mode build options John Garry
` (4 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: John Garry @ 2021-07-12 11:12 UTC (permalink / raw)
To: joro, will, dwmw2, baolu.lu, robin.murphy, corbet
Cc: linux-kernel, iommu, linuxarm, thunder.leizhen, chenxiang66,
linux-doc, dianders, John Garry
As well as the default domain type, it's useful to know whether strict
or lazy for DMA domains, so add this info in a separate print.
The (stict/lazy) mode may be also set via iommu.strict earlyparm, but
this will be processed prior to iommu_subsys_init(), so that print will be
accurate for drivers which don't set the mode via custom means.
For the drivers which set the mode via custom means - AMD and Intel drivers
- they maintain prints to inform a change in policy or that custom cmdline
methods to change policy are deprecated.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
---
drivers/iommu/iommu.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
index 5419c4b9f27a..cf58949cc2f3 100644
--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -138,6 +138,11 @@ static int __init iommu_subsys_init(void)
(iommu_cmd_line & IOMMU_CMD_LINE_DMA_API) ?
"(set via kernel command line)" : "");
+ pr_info("DMA domain TLB invalidation policy: %s mode %s\n",
+ iommu_dma_strict ? "strict" : "lazy",
+ (iommu_cmd_line & IOMMU_CMD_LINE_STRICT) ?
+ "(set via kernel command line)" : "");
+
return 0;
}
subsys_initcall(iommu_subsys_init);
--
2.26.2
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH v15 3/6] iommu: Enhance IOMMU default DMA mode build options
2021-07-12 11:12 [PATCH v15 0/6] iommu: Enhance IOMMU default DMA mode build options John Garry
2021-07-12 11:12 ` [PATCH v15 1/6] iommu: Deprecate Intel and AMD cmdline methods to enable strict mode John Garry
2021-07-12 11:12 ` [PATCH v15 2/6] iommu: Print strict or lazy mode at init time John Garry
@ 2021-07-12 11:12 ` John Garry
2021-07-12 11:12 ` [PATCH v15 4/6] iommu/vt-d: Add support for " John Garry
` (3 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: John Garry @ 2021-07-12 11:12 UTC (permalink / raw)
To: joro, will, dwmw2, baolu.lu, robin.murphy, corbet
Cc: linux-kernel, iommu, linuxarm, thunder.leizhen, chenxiang66,
linux-doc, dianders, John Garry
From: Zhen Lei <thunder.leizhen@huawei.com>
First, add build options IOMMU_DEFAULT_{LAZY|STRICT}, so that we have the
opportunity to set {lazy|strict} mode as default at build time. Then put
the two config options in an choice, as they are mutually exclusive.
[jpg: Make choice between strict and lazy only (and not passthrough)]
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
---
.../admin-guide/kernel-parameters.txt | 3 +-
drivers/iommu/Kconfig | 40 +++++++++++++++++++
drivers/iommu/iommu.c | 2 +-
3 files changed, 43 insertions(+), 2 deletions(-)
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index a04d2748c99a..90b525cf0ec2 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -2042,9 +2042,10 @@
throughput at the cost of reduced device isolation.
Will fall back to strict mode if not supported by
the relevant IOMMU driver.
- 1 - Strict mode (default).
+ 1 - Strict mode.
DMA unmap operations invalidate IOMMU hardware TLBs
synchronously.
+ unset - Use value of CONFIG_IOMMU_DEFAULT_{LAZY,STRICT}.
Note: on x86, the default behaviour depends on the
equivalent driver-specific parameters, but a strict
mode explicitly specified by either method takes
diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index 07b7c25cbed8..9cd5d7afc766 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -90,6 +90,46 @@ config IOMMU_DEFAULT_PASSTHROUGH
If unsure, say N here.
+choice
+ prompt "IOMMU default DMA IOTLB invalidation mode"
+ depends on IOMMU_DMA
+
+ default IOMMU_DEFAULT_STRICT
+ help
+ This option allows an IOMMU DMA IOTLB invalidation mode to be
+ chosen at build time, to override the default mode of each ARCH,
+ removing the need to pass in kernel parameters through command line.
+ It is still possible to provide common boot params to override this
+ config.
+
+ If unsure, keep the default.
+
+config IOMMU_DEFAULT_STRICT
+ bool "strict"
+ help
+ For every IOMMU DMA unmap operation, the flush operation of IOTLB and
+ the free operation of IOVA are guaranteed to be done in the unmap
+ function.
+
+config IOMMU_DEFAULT_LAZY
+ bool "lazy"
+ help
+ Support lazy mode, where for every IOMMU DMA unmap operation, the
+ flush operation of IOTLB and the free operation of IOVA are deferred.
+ They are only guaranteed to be done before the related IOVA will be
+ reused.
+
+ The isolation provided in this mode is not as secure as STRICT mode,
+ such that a vulnerable time window may be created between the DMA
+ unmap and the mappings cached in the IOMMU IOTLB or device TLB
+ finally being invalidated, where the device could still access the
+ memory which has already been unmapped by the device driver.
+ However this mode may provide better performance in high throughput
+ scenarios, and is still considerably more secure than passthrough
+ mode or no IOMMU.
+
+endchoice
+
config OF_IOMMU
def_bool y
depends on OF && IOMMU_API
diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
index cf58949cc2f3..60b1ec42e73b 100644
--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -29,7 +29,7 @@ static struct kset *iommu_group_kset;
static DEFINE_IDA(iommu_group_ida);
static unsigned int iommu_def_domain_type __read_mostly;
-static bool iommu_dma_strict __read_mostly = true;
+static bool iommu_dma_strict __read_mostly = IS_ENABLED(CONFIG_IOMMU_DEFAULT_STRICT);
static u32 iommu_cmd_line __read_mostly;
struct iommu_group {
--
2.26.2
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH v15 4/6] iommu/vt-d: Add support for IOMMU default DMA mode build options
2021-07-12 11:12 [PATCH v15 0/6] iommu: Enhance IOMMU default DMA mode build options John Garry
` (2 preceding siblings ...)
2021-07-12 11:12 ` [PATCH v15 3/6] iommu: Enhance IOMMU default DMA mode build options John Garry
@ 2021-07-12 11:12 ` John Garry
2021-07-12 11:12 ` [PATCH v15 5/6] iommu/amd: " John Garry
` (2 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: John Garry @ 2021-07-12 11:12 UTC (permalink / raw)
To: joro, will, dwmw2, baolu.lu, robin.murphy, corbet
Cc: linux-kernel, iommu, linuxarm, thunder.leizhen, chenxiang66,
linux-doc, dianders, John Garry
From: Zhen Lei <thunder.leizhen@huawei.com>
Make IOMMU_DEFAULT_LAZY default for when INTEL_IOMMU config is set,
as is current behaviour.
Also delete global flag intel_iommu_strict:
- In intel_iommu_setup(), call iommu_set_dma_strict(true) directly. Also
remove the print, as iommu_subsys_init() prints the mode and we have
already marked this param as deprecated.
- For cap_caching_mode() check in intel_iommu_setup(), call
iommu_set_dma_strict(true) directly; also reword the accompanying print
with a level downgrade and also add the missing '\n'.
- For Ironlake GPU, again call iommu_set_dma_strict(true) directly and
keep the accompanying print.
[jpg: Remove intel_iommu_strict]
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
---
drivers/iommu/Kconfig | 1 +
drivers/iommu/intel/iommu.c | 15 ++++++---------
2 files changed, 7 insertions(+), 9 deletions(-)
diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index 9cd5d7afc766..265d7a6c9d3a 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -94,6 +94,7 @@ choice
prompt "IOMMU default DMA IOTLB invalidation mode"
depends on IOMMU_DMA
+ default IOMMU_DEFAULT_LAZY if INTEL_IOMMU
default IOMMU_DEFAULT_STRICT
help
This option allows an IOMMU DMA IOTLB invalidation mode to be
diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
index 67c52b60f8de..d06e8f71c259 100644
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -361,7 +361,6 @@ int intel_iommu_enabled = 0;
EXPORT_SYMBOL_GPL(intel_iommu_enabled);
static int dmar_map_gfx = 1;
-static int intel_iommu_strict;
static int intel_iommu_superpage = 1;
static int iommu_identity_mapping;
static int iommu_skip_te_disable;
@@ -455,8 +454,7 @@ static int __init intel_iommu_setup(char *str)
iommu_dma_forcedac = true;
} else if (!strncmp(str, "strict", 6)) {
pr_warn("intel_iommu=strict deprecated; use iommu.strict=1 instead\n");
- pr_info("Disable batched IOTLB flush\n");
- intel_iommu_strict = 1;
+ iommu_set_dma_strict(true);
} else if (!strncmp(str, "sp_off", 6)) {
pr_info("Disable supported super page\n");
intel_iommu_superpage = 0;
@@ -4382,9 +4380,9 @@ int __init intel_iommu_init(void)
* is likely to be much lower than the overhead of synchronizing
* the virtual and physical IOMMU page-tables.
*/
- if (!intel_iommu_strict && cap_caching_mode(iommu->cap)) {
- pr_warn("IOMMU batching is disabled due to virtualization");
- intel_iommu_strict = 1;
+ if (cap_caching_mode(iommu->cap)) {
+ pr_info_once("IOMMU batching disallowed due to virtualization\n");
+ iommu_set_dma_strict(true);
}
iommu_device_sysfs_add(&iommu->iommu, NULL,
intel_iommu_groups,
@@ -4393,7 +4391,6 @@ int __init intel_iommu_init(void)
}
up_read(&dmar_global_lock);
- iommu_set_dma_strict(intel_iommu_strict);
bus_set_iommu(&pci_bus_type, &intel_iommu_ops);
if (si_domain && !hw_pass_through)
register_memory_notifier(&intel_iommu_memory_nb);
@@ -5703,8 +5700,8 @@ static void quirk_calpella_no_shadow_gtt(struct pci_dev *dev)
} else if (dmar_map_gfx) {
/* we have to ensure the gfx device is idle before we flush */
pci_info(dev, "Disabling batched IOTLB flush on Ironlake\n");
- intel_iommu_strict = 1;
- }
+ iommu_set_dma_strict(true);
+ }
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0040, quirk_calpella_no_shadow_gtt);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0044, quirk_calpella_no_shadow_gtt);
--
2.26.2
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH v15 5/6] iommu/amd: Add support for IOMMU default DMA mode build options
2021-07-12 11:12 [PATCH v15 0/6] iommu: Enhance IOMMU default DMA mode build options John Garry
` (3 preceding siblings ...)
2021-07-12 11:12 ` [PATCH v15 4/6] iommu/vt-d: Add support for " John Garry
@ 2021-07-12 11:12 ` John Garry
2021-07-12 11:12 ` [PATCH v15 6/6] iommu: Remove mode argument from iommu_set_dma_strict() John Garry
2021-07-26 11:28 ` [PATCH v15 0/6] iommu: Enhance IOMMU default DMA mode build options Joerg Roedel
6 siblings, 0 replies; 8+ messages in thread
From: John Garry @ 2021-07-12 11:12 UTC (permalink / raw)
To: joro, will, dwmw2, baolu.lu, robin.murphy, corbet
Cc: linux-kernel, iommu, linuxarm, thunder.leizhen, chenxiang66,
linux-doc, dianders, John Garry
From: Zhen Lei <thunder.leizhen@huawei.com>
Make IOMMU_DEFAULT_LAZY default for when AMD_IOMMU config is set, which
matches current behaviour.
For "fullflush" param, just call iommu_set_dma_strict(true) directly.
Since we get a strict vs lazy mode print already in iommu_subsys_init(),
and maintain a deprecation print when "fullflush" param is passed, drop the
prints in amd_iommu_init_dma_ops().
Finally drop global flag amd_iommu_unmap_flush, as it has no longer has any
purpose.
[jpg: Rebase for relocated file and drop amd_iommu_unmap_flush]
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/iommu/Kconfig | 2 +-
drivers/iommu/amd/amd_iommu_types.h | 6 ------
drivers/iommu/amd/init.c | 3 +--
drivers/iommu/amd/iommu.c | 6 ------
4 files changed, 2 insertions(+), 15 deletions(-)
diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index 265d7a6c9d3a..c84da8205be7 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -94,7 +94,7 @@ choice
prompt "IOMMU default DMA IOTLB invalidation mode"
depends on IOMMU_DMA
- default IOMMU_DEFAULT_LAZY if INTEL_IOMMU
+ default IOMMU_DEFAULT_LAZY if (AMD_IOMMU || INTEL_IOMMU)
default IOMMU_DEFAULT_STRICT
help
This option allows an IOMMU DMA IOTLB invalidation mode to be
diff --git a/drivers/iommu/amd/amd_iommu_types.h b/drivers/iommu/amd/amd_iommu_types.h
index 94c1a7a9876d..8dbe61e2b3c1 100644
--- a/drivers/iommu/amd/amd_iommu_types.h
+++ b/drivers/iommu/amd/amd_iommu_types.h
@@ -779,12 +779,6 @@ extern u16 amd_iommu_last_bdf;
/* allocation bitmap for domain ids */
extern unsigned long *amd_iommu_pd_alloc_bitmap;
-/*
- * If true, the addresses will be flushed on unmap time, not when
- * they are reused
- */
-extern bool amd_iommu_unmap_flush;
-
/* Smallest max PASID supported by any IOMMU in the system */
extern u32 amd_iommu_max_pasid;
diff --git a/drivers/iommu/amd/init.c b/drivers/iommu/amd/init.c
index 3a2fb805f11e..1e641cb6dddc 100644
--- a/drivers/iommu/amd/init.c
+++ b/drivers/iommu/amd/init.c
@@ -161,7 +161,6 @@ u16 amd_iommu_last_bdf; /* largest PCI device id we have
to handle */
LIST_HEAD(amd_iommu_unity_map); /* a list of required unity mappings
we find in ACPI */
-bool amd_iommu_unmap_flush; /* if true, flush on every unmap */
LIST_HEAD(amd_iommu_list); /* list of all AMD IOMMUs in the
system */
@@ -3100,7 +3099,7 @@ static int __init parse_amd_iommu_options(char *str)
for (; *str; ++str) {
if (strncmp(str, "fullflush", 9) == 0) {
pr_warn("amd_iommu=fullflush deprecated; use iommu.strict=1 instead\n");
- amd_iommu_unmap_flush = true;
+ iommu_set_dma_strict(true);
}
if (strncmp(str, "force_enable", 12) == 0)
amd_iommu_force_enable = true;
diff --git a/drivers/iommu/amd/iommu.c b/drivers/iommu/amd/iommu.c
index 811a49a95d04..52fe2326042a 100644
--- a/drivers/iommu/amd/iommu.c
+++ b/drivers/iommu/amd/iommu.c
@@ -1775,12 +1775,6 @@ void amd_iommu_domain_update(struct protection_domain *domain)
static void __init amd_iommu_init_dma_ops(void)
{
swiotlb = (iommu_default_passthrough() || sme_me_mask) ? 1 : 0;
-
- if (amd_iommu_unmap_flush)
- pr_info("IO/TLB flush on unmap enabled\n");
- else
- pr_info("Lazy IO/TLB flushing enabled\n");
- iommu_set_dma_strict(amd_iommu_unmap_flush);
}
int __init amd_iommu_init_api(void)
--
2.26.2
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH v15 6/6] iommu: Remove mode argument from iommu_set_dma_strict()
2021-07-12 11:12 [PATCH v15 0/6] iommu: Enhance IOMMU default DMA mode build options John Garry
` (4 preceding siblings ...)
2021-07-12 11:12 ` [PATCH v15 5/6] iommu/amd: " John Garry
@ 2021-07-12 11:12 ` John Garry
2021-07-26 11:28 ` [PATCH v15 0/6] iommu: Enhance IOMMU default DMA mode build options Joerg Roedel
6 siblings, 0 replies; 8+ messages in thread
From: John Garry @ 2021-07-12 11:12 UTC (permalink / raw)
To: joro, will, dwmw2, baolu.lu, robin.murphy, corbet
Cc: linux-kernel, iommu, linuxarm, thunder.leizhen, chenxiang66,
linux-doc, dianders, John Garry
We only ever now set strict mode enabled in iommu_set_dma_strict(), so
just remove the argument.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
---
drivers/iommu/amd/init.c | 2 +-
drivers/iommu/intel/iommu.c | 6 +++---
drivers/iommu/iommu.c | 5 ++---
include/linux/iommu.h | 2 +-
4 files changed, 7 insertions(+), 8 deletions(-)
diff --git a/drivers/iommu/amd/init.c b/drivers/iommu/amd/init.c
index 1e641cb6dddc..6e12a615117b 100644
--- a/drivers/iommu/amd/init.c
+++ b/drivers/iommu/amd/init.c
@@ -3099,7 +3099,7 @@ static int __init parse_amd_iommu_options(char *str)
for (; *str; ++str) {
if (strncmp(str, "fullflush", 9) == 0) {
pr_warn("amd_iommu=fullflush deprecated; use iommu.strict=1 instead\n");
- iommu_set_dma_strict(true);
+ iommu_set_dma_strict();
}
if (strncmp(str, "force_enable", 12) == 0)
amd_iommu_force_enable = true;
diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
index d06e8f71c259..6666089c2607 100644
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -454,7 +454,7 @@ static int __init intel_iommu_setup(char *str)
iommu_dma_forcedac = true;
} else if (!strncmp(str, "strict", 6)) {
pr_warn("intel_iommu=strict deprecated; use iommu.strict=1 instead\n");
- iommu_set_dma_strict(true);
+ iommu_set_dma_strict();
} else if (!strncmp(str, "sp_off", 6)) {
pr_info("Disable supported super page\n");
intel_iommu_superpage = 0;
@@ -4382,7 +4382,7 @@ int __init intel_iommu_init(void)
*/
if (cap_caching_mode(iommu->cap)) {
pr_info_once("IOMMU batching disallowed due to virtualization\n");
- iommu_set_dma_strict(true);
+ iommu_set_dma_strict();
}
iommu_device_sysfs_add(&iommu->iommu, NULL,
intel_iommu_groups,
@@ -5700,7 +5700,7 @@ static void quirk_calpella_no_shadow_gtt(struct pci_dev *dev)
} else if (dmar_map_gfx) {
/* we have to ensure the gfx device is idle before we flush */
pci_info(dev, "Disabling batched IOTLB flush on Ironlake\n");
- iommu_set_dma_strict(true);
+ iommu_set_dma_strict();
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0040, quirk_calpella_no_shadow_gtt);
diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
index 60b1ec42e73b..ff221d3ddcbc 100644
--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -349,10 +349,9 @@ static int __init iommu_dma_setup(char *str)
}
early_param("iommu.strict", iommu_dma_setup);
-void iommu_set_dma_strict(bool strict)
+void iommu_set_dma_strict(void)
{
- if (strict || !(iommu_cmd_line & IOMMU_CMD_LINE_STRICT))
- iommu_dma_strict = strict;
+ iommu_dma_strict = true;
}
bool iommu_get_dma_strict(struct iommu_domain *domain)
diff --git a/include/linux/iommu.h b/include/linux/iommu.h
index 32d448050bf7..754f67d6dd90 100644
--- a/include/linux/iommu.h
+++ b/include/linux/iommu.h
@@ -476,7 +476,7 @@ int iommu_enable_nesting(struct iommu_domain *domain);
int iommu_set_pgtable_quirks(struct iommu_domain *domain,
unsigned long quirks);
-void iommu_set_dma_strict(bool val);
+void iommu_set_dma_strict(void);
bool iommu_get_dma_strict(struct iommu_domain *domain);
extern int report_iommu_fault(struct iommu_domain *domain, struct device *dev,
--
2.26.2
^ permalink raw reply related [flat|nested] 8+ messages in thread* Re: [PATCH v15 0/6] iommu: Enhance IOMMU default DMA mode build options
2021-07-12 11:12 [PATCH v15 0/6] iommu: Enhance IOMMU default DMA mode build options John Garry
` (5 preceding siblings ...)
2021-07-12 11:12 ` [PATCH v15 6/6] iommu: Remove mode argument from iommu_set_dma_strict() John Garry
@ 2021-07-26 11:28 ` Joerg Roedel
6 siblings, 0 replies; 8+ messages in thread
From: Joerg Roedel @ 2021-07-26 11:28 UTC (permalink / raw)
To: John Garry
Cc: will, dwmw2, baolu.lu, robin.murphy, corbet, linux-kernel, iommu,
linuxarm, thunder.leizhen, chenxiang66, linux-doc, dianders
On Mon, Jul 12, 2021 at 07:12:14PM +0800, John Garry wrote:
> John Garry (3):
> iommu: Deprecate Intel and AMD cmdline methods to enable strict mode
> iommu: Print strict or lazy mode at init time
> iommu: Remove mode argument from iommu_set_dma_strict()
>
> Zhen Lei (3):
> iommu: Enhance IOMMU default DMA mode build options
> iommu/vt-d: Add support for IOMMU default DMA mode build options
> iommu/amd: Add support for IOMMU default DMA mode build options
Applied to iommu/core, thanks.
^ permalink raw reply [flat|nested] 8+ messages in thread