linux-doc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bagas Sanjaya <bagasdotme@gmail.com>
To: James Seo <james@equiv.tech>, Jean Delvare <jdelvare@suse.com>,
	Guenter Roeck <linux@roeck-us.net>,
	Jonathan Corbet <corbet@lwn.net>
Cc: linux-hwmon@vger.kernel.org, linux-doc@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [RFC 06/11] Documentation/hwmon: Revise patch submission checklist
Date: Fri, 5 May 2023 11:34:51 +0700	[thread overview]
Message-ID: <ZFSHa2ThLorH5fwI@debian.me> (raw)
In-Reply-To: <20230504075752.1320967-7-james@equiv.tech>

[-- Attachment #1: Type: text/plain, Size: 2293 bytes --]

On Thu, May 04, 2023 at 12:57:47AM -0700, James Seo wrote:
> -* Only the following I2C addresses shall be probed: 0x18-0x1f, 0x28-0x2f,
> -  0x48-0x4f, 0x58, 0x5c, 0x73 and 0x77. Probing other addresses is strongly
> -  discouraged as it is known to cause trouble with other (non-hwmon) I2C
> -  chips. If your chip lives at an address which can't be probed then the
> -  device will have to be instantiated explicitly (which is always better
> -  anyway.)
> +* Only the following I2C addresses shall be probed: ``0x18``-``0x1f``,
> +  ``0x28``-``0x2f``, ``0x48``-``0x4f``, ``0x58``, ``0x5c``, ``0x73``,
> +  and ``0x77``. Probing other addresses is strongly discouraged, as it is
> +  known to cause trouble with other (non-``hwmon``) I2C chips. If your chip
> +  lives at an address which can't be probed, then the device will have to be
> +  instantiated explicitly (which is always better anyway).

IMO hwmon here refers to the subsystem (not code identifier name), so
inlining here isn't needed.

>  * Make sure there are no race conditions in the probe function. Specifically,
>    completely initialize your chip and your driver first, then register with
> -  the hwmon subsystem.
> +  the ``hwmon`` subsystem.

Also here.

>  
> -* Use devm_hwmon_device_register_with_info() or, if your driver needs a remove
> -  function, hwmon_device_register_with_info() to register your driver with the
> -  hwmon subsystem. Try using devm_add_action() instead of a remove function if
> -  possible. Do not use any of the deprecated registration functions.
> +* Use
> +  :ref:`devm_hwmon_device_register_with_info() <devm_hwmon_device_register_with_info>`
> +  or, if your driver needs a remove function,
> +  :ref:`hwmon_device_register_with_info() <hwmon_device_register_with_info>` to
> +  register your driver with the ``hwmon`` subsystem. Try using devm_add_action()
> +  instead of a remove function if possible. Do not use any of the deprecated
> +  registration functions.

And here.

> -* Do not provide support for deprecated sysfs attributes.
> +* Do not provide support for deprecated ``sysfs`` attributes.

Dunno if sysfs (as subsystem name) also needs to be inlined.

Thanks.

-- 
An old man doll... just what I always wanted! - Clara

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

  reply	other threads:[~2023-05-05  4:34 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-04  7:57 [RFC 00/11] hwmon: Modernize documentation James Seo
2023-05-04  7:57 ` [RFC 01/11] Documentation/hwmon: Move misplaced entry in hwmon docs index James Seo
2023-05-05  4:58   ` Bagas Sanjaya
2023-05-06 13:43   ` Guenter Roeck
2023-05-04  7:57 ` [RFC 02/11] hwmon: (core) Rename last parameter of devm_hwmon_register_with_info() James Seo
2023-05-04 15:29   ` Guenter Roeck
2023-05-05 13:15     ` James Seo
2023-05-05 13:30       ` Guenter Roeck
2023-05-05 14:39         ` James Seo
2023-05-04  7:57 ` [RFC 03/11] hwmon: (core) Revise kerneldoc comments James Seo
2023-07-25 23:51   ` Russell Haley
2023-05-04  7:57 ` [RFC 04/11] Documentation/hwmon: Revise hwmon kernel API reference James Seo
2023-05-05  4:12   ` Bagas Sanjaya
2023-05-05  4:20   ` Bagas Sanjaya
2023-05-05 13:29     ` James Seo
2023-05-06 13:52   ` Guenter Roeck
2023-05-07 14:40     ` James Seo
2023-05-04  7:57 ` [RFC 05/11] Documentation/hwmon: Revise PMBus core documentation James Seo
2023-05-05  4:27   ` Bagas Sanjaya
2023-05-05  4:32     ` Guenter Roeck
2023-05-05 13:35     ` James Seo
2023-05-04  7:57 ` [RFC 06/11] Documentation/hwmon: Revise patch submission checklist James Seo
2023-05-05  4:34   ` Bagas Sanjaya [this message]
2023-05-05 14:50     ` James Seo
2023-05-04  7:57 ` [RFC 07/11] Documentation/hwmon: Revise sysfs interface specification James Seo
2023-05-05  4:51   ` Bagas Sanjaya
2023-05-05 15:01     ` James Seo
2023-05-05 15:10       ` Jonathan Corbet
2023-05-04  7:57 ` [RFC 08/11] Documentation/hwmon: Revise userspace tools documentation James Seo
2023-05-05  5:03   ` Bagas Sanjaya
2023-05-05 15:12     ` James Seo
2023-05-05 21:10       ` Guenter Roeck
2023-05-04  7:57 ` [RFC 09/11] ABI: sysfs-class-hwmon: Revise hwmon ABI documentation James Seo
2023-05-04  7:57 ` [RFC 10/11] hwmon: (core) Add missing beep-related standard attributes James Seo
2023-05-04  7:57 ` [RFC 11/11] ABI: sysfs-class-hwmon: Add missing hwmon " James Seo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZFSHa2ThLorH5fwI@debian.me \
    --to=bagasdotme@gmail.com \
    --cc=corbet@lwn.net \
    --cc=james@equiv.tech \
    --cc=jdelvare@suse.com \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).