Re: [PATCH v3] init: Add support for rootwait timeout parameter

[Liang Li <liliang6@email.cn>]

On 2023-08-06 18:12, Loic Poulain <loic.poulain@linaro.org> wrote:
> Add an optional timeout arg to 'rootwait' as the maximum time in
> seconds to wait for the root device to show up before attempting
> forced mount of the root filesystem.
> 
> Use case:
> In case of device mapper usage for the rootfs (e.g. root=/dev/dm-0),
> if the mapper is not able to create the virtual block for any reason
> (wrong arguments, bad dm-verity signature, etc), the `rootwait` param
> causes the kernel to wait forever. It may however be desirable to only
> wait for a given time and then panic (force mount) to cause device reset.
> This gives the bootloader a chance to detect the problem and to take some
> measures, such as marking the booted partition as bad (for A/B case) or
> entering a recovery mode.
> 
> In success case, mounting happens as soon as the root device is ready,
> unlike the existing 'rootdelay' parameter which performs an unconditional
> pause.
> 
> Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
> ---
>  v2: rebase + reword: add use case example
>  v3: Use kstrtoint instead of deprecated simple_strtoul
> 
>  .../admin-guide/kernel-parameters.txt         |  4 ++++
>  init/do_mounts.c                              | 24 +++++++++++++++++--
>  2 files changed, 26 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
> index a1457995fd41..387cf9c2a2c5 100644
> --- a/Documentation/admin-guide/kernel-parameters.txt
> +++ b/Documentation/admin-guide/kernel-parameters.txt
> @@ -5501,6 +5501,10 @@
>  			Useful for devices that are detected asynchronously
>  			(e.g. USB and MMC devices).
>  
> +	rootwait=	[KNL] Maximum time (in seconds) to wait for root device
> +			to show up before attempting to mount the root
> +			filesystem.
> +
>  	rproc_mem=nn[KMG][@address]
>  			[KNL,ARM,CMA] Remoteproc physical memory block.
>  			Memory area to be used by remote processor image,
> diff --git a/init/do_mounts.c b/init/do_mounts.c
> index 1aa015883519..98190bf34a9f 100644
> --- a/init/do_mounts.c
> +++ b/init/do_mounts.c
> @@ -18,6 +18,7 @@
>  #include <linux/slab.h>
>  #include <linux/ramfs.h>
>  #include <linux/shmem_fs.h>
> +#include <linux/ktime.h>
>  
>  #include <linux/nfs_fs.h>
>  #include <linux/nfs_fs_sb.h>
> @@ -71,12 +72,25 @@ static int __init rootwait_setup(char *str)
>  {
>  	if (*str)
>  		return 0;
> -	root_wait = 1;
> +	root_wait = -1;
>  	return 1;
>  }
>  
>  __setup("rootwait", rootwait_setup);
>  
> +static int __init rootwait_timeout_setup(char *str)
> +{
> +	if (kstrtoint(str, 0, &root_wait) || root_wait < 0) {
> +		pr_warn("ignoring invalid rootwait value\n");
> +		/* fallback to indefinite wait */
> +		root_wait = -1;

Will it be a little better to add the 'fallback to infinite wait' message
into pr_wran as well?

> +	}
> +
> +	return 1;
> +}
> +
> +__setup("rootwait=", rootwait_timeout_setup);
> +
>  static char * __initdata root_mount_data;
>  static int __init root_data_setup(char *str)
>  {
> @@ -384,14 +398,20 @@ void __init mount_root(char *root_device_name)
>  /* wait for any asynchronous scanning to complete */
>  static void __init wait_for_root(char *root_device_name)
>  {
> +	const ktime_t end = ktime_add_ms(ktime_get_raw(), root_wait * MSEC_PER_SEC);
> +
>  	if (ROOT_DEV != 0)
>  		return;
>  
>  	pr_info("Waiting for root device %s...\n", root_device_name);
>  
>  	while (!driver_probe_done() ||
> -	       early_lookup_bdev(root_device_name, &ROOT_DEV) < 0)
> +	       early_lookup_bdev(root_device_name, &ROOT_DEV) < 0) {

Seems like one indent issue here?

>  		msleep(5);
> +		if (root_wait > 0 && ktime_after(ktime_get_raw(), end))
> +			break;
> +	}
> +
>  	async_synchronize_full();
>  
>  }
> -- 
> 2.34.1

Regards.
Liang Li