Re: [PATCH net-next v7 15/16] net: ethtool: ts: Let the active time stamping layer be selectable

["Russell King (Oracle)" <linux@armlinux.org.uk>]

On Mon, Nov 20, 2023 at 07:39:35PM +0100, Andrew Lunn wrote:
> > What about my use case of having a NIC which can stamp at a low rate
> > at the PHY (for PTP) and high rate at the DMA block (for congestion
> > control)? Both stamp points have the same PHC index.
> 
> How theoretical is that? To me, it seems more likely you have two PHC.
> 
> The PHY stamping tends to be slow because of the MDIO bus. If the MAC
> has fast access to the PHC, it means its not on the MDIO bus. It
> probably means you have the PHY integrated into the MAC/SoC, so the
> MAC can access it. But if its integrated like this, i don't see why
> PHY stamping should be particularly slow. So you can probably use it
> for congestion control. And then you don't need DMA stamping.
> 
> Do you know of real hardware with a MAC and a PHY sharing a PHC?

Not so much a MAC and PHY sharing a PHC, but I notice in USXGMII-M,
there is the ability for the PHY to pass the timestamp back to the MAC
through the USXGMII-M connection - which would eliminate the problems
of accessing the PHY to get that the timestamps.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!