From: Andy Gospodarek <andrew.gospodarek@broadcom.com>
To: Taehee Yoo <ap420073@gmail.com>
Cc: davem@davemloft.net, kuba@kernel.org, pabeni@redhat.com,
edumazet@google.com, almasrymina@google.com,
donald.hunter@gmail.com, corbet@lwn.net,
michael.chan@broadcom.com, andrew+netdev@lunn.ch,
hawk@kernel.org, ilias.apalodimas@linaro.org, ast@kernel.org,
daniel@iogearbox.net, john.fastabend@gmail.com, dw@davidwei.uk,
sdf@fomichev.me, asml.silence@gmail.com, brett.creeley@amd.com,
linux-doc@vger.kernel.org, netdev@vger.kernel.org,
kory.maincent@bootlin.com, maxime.chevallier@bootlin.com,
danieller@nvidia.com, hengqi@linux.alibaba.com,
ecree.xilinx@gmail.com, przemyslaw.kitszel@intel.com,
hkallweit1@gmail.com, ahmed.zaki@intel.com,
rrameshbabu@nvidia.com, idosch@nvidia.com, jiri@resnulli.us,
bigeasy@linutronix.de, lorenzo@kernel.org, jdamato@fastly.com,
aleksander.lobakin@intel.com, kaiyuanz@google.com,
willemb@google.com, daniel.zahka@gmail.com
Subject: Re: [PATCH net-next v5 5/7] bnxt_en: add support for header-data-split-thresh ethtool command
Date: Thu, 14 Nov 2024 17:54:49 -0500 [thread overview]
Message-ID: <ZzZ_ub26phtVNmnK@JRM7P7Q02P> (raw)
In-Reply-To: <20241113173222.372128-6-ap420073@gmail.com>
On Wed, Nov 13, 2024 at 05:32:19PM +0000, Taehee Yoo wrote:
> The bnxt_en driver has configured the hds_threshold value automatically
> when TPA is enabled based on the rx-copybreak default value.
> Now the header-data-split-thresh ethtool command is added, so it adds an
> implementation of header-data-split-thresh option.
>
> Configuration of the header-data-split-thresh is allowed only when
> the header-data-split is enabled. The default value of
> header-data-split-thresh is 256, which is the default value of
> rx-copybreak, which used to be the hds_thresh value.
>
> # Example:
> # ethtool -G enp14s0f0np0 tcp-data-split on header-data-split-thresh 256
> # ethtool -g enp14s0f0np0
> Ring parameters for enp14s0f0np0:
> Pre-set maximums:
> ...
> Header data split thresh: 256
> Current hardware settings:
> ...
> TCP data split: on
> Header data split thresh: 256
>
> Tested-by: Stanislav Fomichev <sdf@fomichev.me>
> Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Tested-by: Andy Gospodarek <gospo@broadcom.com>
> ---
>
> v5:
> - No changes.
>
> v4:
> - Reduce hole in struct bnxt.
> - Add ETHTOOL_RING_USE_HDS_THRS to indicate bnxt_en driver support
> header-data-split-thresh option.
> - Add Test tag from Stanislav.
>
> v3:
> - Drop validation logic tcp-data-split and tcp-data-split-thresh.
>
> v2:
> - Patch added.
>
> drivers/net/ethernet/broadcom/bnxt/bnxt.c | 3 ++-
> drivers/net/ethernet/broadcom/bnxt/bnxt.h | 2 ++
> drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 7 ++++++-
> 3 files changed, 10 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
> index 608bcca71676..27d6bac3a69a 100644
> --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
> +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
> @@ -4454,6 +4454,7 @@ void bnxt_set_tpa_flags(struct bnxt *bp)
> static void bnxt_init_ring_params(struct bnxt *bp)
> {
> bp->rx_copybreak = BNXT_DEFAULT_RX_COPYBREAK;
> + bp->hds_threshold = BNXT_DEFAULT_RX_COPYBREAK;
> }
>
> /* bp->rx_ring_size, bp->tx_ring_size, dev->mtu, BNXT_FLAG_{G|L}RO flags must
> @@ -6429,7 +6430,7 @@ static int bnxt_hwrm_vnic_set_hds(struct bnxt *bp, struct bnxt_vnic_info *vnic)
> VNIC_PLCMODES_CFG_REQ_FLAGS_HDS_IPV6);
> req->enables |=
> cpu_to_le32(VNIC_PLCMODES_CFG_REQ_ENABLES_HDS_THRESHOLD_VALID);
> - req->hds_threshold = cpu_to_le16(bp->rx_copybreak);
> + req->hds_threshold = cpu_to_le16(bp->hds_threshold);
> }
> req->vnic_id = cpu_to_le32(vnic->fw_vnic_id);
> return hwrm_req_send(bp, req);
> diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
> index 3a7d2f3ebb2a..058db26fb255 100644
> --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h
> +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
> @@ -2362,6 +2362,8 @@ struct bnxt {
> u8 q_ids[BNXT_MAX_QUEUE];
> u8 max_q;
> u8 num_tc;
> +#define BNXT_HDS_THRESHOLD_MAX 256
> + u16 hds_threshold;
>
> unsigned int current_interval;
> #define BNXT_TIMER_INTERVAL HZ
> diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
> index b0054eef389b..a51a4cedecb9 100644
> --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
> +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
> @@ -833,6 +833,9 @@ static void bnxt_get_ringparam(struct net_device *dev,
> ering->rx_pending = bp->rx_ring_size;
> ering->rx_jumbo_pending = bp->rx_agg_ring_size;
> ering->tx_pending = bp->tx_ring_size;
> +
> + kernel_ering->hds_thresh = bp->hds_threshold;
> + kernel_ering->hds_thresh_max = BNXT_HDS_THRESHOLD_MAX;
> }
>
> static int bnxt_set_ringparam(struct net_device *dev,
> @@ -868,6 +871,7 @@ static int bnxt_set_ringparam(struct net_device *dev,
> else if (tcp_data_split == ETHTOOL_TCP_DATA_SPLIT_UNKNOWN)
> bp->flags &= ~BNXT_FLAG_HDS;
>
> + bp->hds_threshold = (u16)kernel_ering->hds_thresh;
> bp->rx_ring_size = ering->rx_pending;
> bp->tx_ring_size = ering->tx_pending;
> bnxt_set_ring_params(bp);
> @@ -5363,7 +5367,8 @@ const struct ethtool_ops bnxt_ethtool_ops = {
> ETHTOOL_COALESCE_STATS_BLOCK_USECS |
> ETHTOOL_COALESCE_USE_ADAPTIVE_RX |
> ETHTOOL_COALESCE_USE_CQE,
> - .supported_ring_params = ETHTOOL_RING_USE_TCP_DATA_SPLIT,
> + .supported_ring_params = ETHTOOL_RING_USE_TCP_DATA_SPLIT |
> + ETHTOOL_RING_USE_HDS_THRS,
> .get_link_ksettings = bnxt_get_link_ksettings,
> .set_link_ksettings = bnxt_set_link_ksettings,
> .get_fec_stats = bnxt_get_fec_stats,
> --
> 2.34.1
>
next prev parent reply other threads:[~2024-11-14 22:54 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-13 17:32 [PATCH net-next v5 0/7] bnxt_en: implement tcp-data-split and thresh option Taehee Yoo
2024-11-13 17:32 ` [PATCH net-next v5 1/7] bnxt_en: add support for rx-copybreak ethtool command Taehee Yoo
2024-11-14 22:54 ` Andy Gospodarek
2024-11-15 0:22 ` Michael Chan
2024-11-13 17:32 ` [PATCH net-next v5 2/7] net: ethtool: add tcp_data_split_mod member in kernel_ethtool_ringparam Taehee Yoo
2024-11-15 4:22 ` Jakub Kicinski
2024-11-15 17:17 ` Taehee Yoo
2024-11-15 20:07 ` Saeed Mahameed
2024-11-13 17:32 ` [PATCH net-next v5 3/7] bnxt_en: add support for tcp-data-split ethtool command Taehee Yoo
2024-11-14 22:54 ` Andy Gospodarek
2024-11-15 4:15 ` Jakub Kicinski
2024-11-15 17:12 ` Taehee Yoo
2024-11-13 17:32 ` [PATCH net-next v5 4/7] net: ethtool: add support for configuring header-data-split-thresh Taehee Yoo
2024-11-15 4:24 ` Jakub Kicinski
2024-11-15 18:05 ` Taehee Yoo
2024-11-15 19:18 ` Jakub Kicinski
2024-11-17 12:31 ` Taehee Yoo
2024-11-15 20:27 ` Saeed Mahameed
2024-11-17 14:26 ` Taehee Yoo
2024-11-13 17:32 ` [PATCH net-next v5 5/7] bnxt_en: add support for header-data-split-thresh ethtool command Taehee Yoo
2024-11-14 22:54 ` Andy Gospodarek [this message]
2024-11-15 0:27 ` Michael Chan
2024-11-15 16:18 ` Taehee Yoo
2024-11-13 17:32 ` [PATCH net-next v5 6/7] net: devmem: add ring parameter filtering Taehee Yoo
2024-11-13 17:32 ` [PATCH net-next v5 7/7] net: ethtool: " Taehee Yoo
2024-11-14 22:55 ` [PATCH net-next v5 0/7] bnxt_en: implement tcp-data-split and thresh option Andy Gospodarek
2024-12-17 16:30 ` Jakub Kicinski
2024-12-18 13:34 ` Taehee Yoo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZzZ_ub26phtVNmnK@JRM7P7Q02P \
--to=andrew.gospodarek@broadcom.com \
--cc=ahmed.zaki@intel.com \
--cc=aleksander.lobakin@intel.com \
--cc=almasrymina@google.com \
--cc=andrew+netdev@lunn.ch \
--cc=ap420073@gmail.com \
--cc=asml.silence@gmail.com \
--cc=ast@kernel.org \
--cc=bigeasy@linutronix.de \
--cc=brett.creeley@amd.com \
--cc=corbet@lwn.net \
--cc=daniel.zahka@gmail.com \
--cc=daniel@iogearbox.net \
--cc=danieller@nvidia.com \
--cc=davem@davemloft.net \
--cc=donald.hunter@gmail.com \
--cc=dw@davidwei.uk \
--cc=ecree.xilinx@gmail.com \
--cc=edumazet@google.com \
--cc=hawk@kernel.org \
--cc=hengqi@linux.alibaba.com \
--cc=hkallweit1@gmail.com \
--cc=idosch@nvidia.com \
--cc=ilias.apalodimas@linaro.org \
--cc=jdamato@fastly.com \
--cc=jiri@resnulli.us \
--cc=john.fastabend@gmail.com \
--cc=kaiyuanz@google.com \
--cc=kory.maincent@bootlin.com \
--cc=kuba@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=lorenzo@kernel.org \
--cc=maxime.chevallier@bootlin.com \
--cc=michael.chan@broadcom.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=przemyslaw.kitszel@intel.com \
--cc=rrameshbabu@nvidia.com \
--cc=sdf@fomichev.me \
--cc=willemb@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).