[PATCH v3 1/2] platform/x86: Move Lenovo files into lenovo subdir

[PATCH v3 1/2] platform/x86: Move Lenovo files into lenovo subdir

[Mark Pearson]

Create lenovo subdirectory for holding Lenovo specific drivers.

Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
---
Changes in v3:
 - implement file naming as suggested by Andy Shevchenko
 - Removed documentation as not required
 - Added date to Makefile for improved clarity on split
 - Cosmetic clean ups.

Changes in v2:
 - Rebased to Linus's latest as requested
 - Updated documentation reference
 - Updated MAINTAINER file
 - Removed X86_PLATFORM_DRIVERS_LENOVO as I was worried about
   maintaining backwards compatibility for the distros.
 - Removed 2nd patch in series splitting out hkeys. That will be for
   the future

 MAINTAINERS                                   |  16 +-
 drivers/platform/x86/Kconfig                  | 229 +----------------
 drivers/platform/x86/Makefile                 |  13 +-
 drivers/platform/x86/lenovo/Kconfig           | 234 ++++++++++++++++++
 drivers/platform/x86/lenovo/Makefile          |  23 ++
 .../x86/{ => lenovo}/ideapad-laptop.c         |   0
 .../x86/{ => lenovo}/ideapad-laptop.h         |   0
 drivers/platform/x86/{ => lenovo}/think-lmi.c |   2 +-
 drivers/platform/x86/{ => lenovo}/think-lmi.h |   0
 .../platform/x86/{ => lenovo}/thinkpad_acpi.c |   2 +-
 .../wmi-camera.c}                             |   0
 .../wmi-hotkey-utilities.c}                   |   0
 .../x86/{lenovo-ymc.c => lenovo/ymc.c}        |   0
 .../yoga-tab2-pro-1380-fastcharger.c}         |   2 +-
 .../{lenovo-yogabook.c => lenovo/yogabook.c}  |   0
 15 files changed, 276 insertions(+), 245 deletions(-)
 create mode 100644 drivers/platform/x86/lenovo/Kconfig
 create mode 100644 drivers/platform/x86/lenovo/Makefile
 rename drivers/platform/x86/{ => lenovo}/ideapad-laptop.c (100%)
 rename drivers/platform/x86/{ => lenovo}/ideapad-laptop.h (100%)
 rename drivers/platform/x86/{ => lenovo}/think-lmi.c (99%)
 rename drivers/platform/x86/{ => lenovo}/think-lmi.h (100%)
 rename drivers/platform/x86/{ => lenovo}/thinkpad_acpi.c (99%)
 rename drivers/platform/x86/{lenovo-wmi-camera.c => lenovo/wmi-camera.c} (100%)
 rename drivers/platform/x86/{lenovo-wmi-hotkey-utilities.c => lenovo/wmi-hotkey-utilities.c} (100%)
 rename drivers/platform/x86/{lenovo-ymc.c => lenovo/ymc.c} (100%)
 rename drivers/platform/x86/{lenovo-yoga-tab2-pro-1380-fastcharger.c => lenovo/yoga-tab2-pro-1380-fastcharger.c} (99%)
 rename drivers/platform/x86/{lenovo-yogabook.c => lenovo/yogabook.c} (100%)

diff --git a/MAINTAINERS b/MAINTAINERS
index 75da23034e18..f386fce7e5c7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11555,7 +11555,7 @@ M:	Ike Panhc <ikepanhc@gmail.com>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
 W:	http://launchpad.net/ideapad-laptop
-F:	drivers/platform/x86/ideapad-laptop.c
+F:	drivers/platform/x86/lenovo/ideapad-laptop.c
 
 IDEAPAD LAPTOP SLIDEBAR DRIVER
 M:	Andrey Moiseev <o2g.org.ru@gmail.com>
@@ -13604,11 +13604,17 @@ S:	Maintained
 W:	http://legousb.sourceforge.net/
 F:	drivers/usb/misc/legousbtower.c
 
+LENOVO drivers
+M:	Mark Pearson <mpearson-lenovo@squebb.ca>
+L:	platform-driver-x86@vger.kernel.org
+S:	Maintained
+F:	drivers/platform/x86/lenovo/*
+
 LENOVO WMI HOTKEY UTILITIES DRIVER
 M:	Jackie Dong <xy-jackie@139.com>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
-F:	drivers/platform/x86/lenovo-wmi-hotkey-utilities.c
+F:	drivers/platform/x86/lenovo/lenovo-wmi-hotkey-utilities.c
 
 LETSKETCH HID TABLET DRIVER
 M:	Hans de Goede <hdegoede@redhat.com>
@@ -24538,14 +24544,14 @@ S:	Maintained
 W:	http://ibm-acpi.sourceforge.net
 W:	http://thinkwiki.org/wiki/Ibm-acpi
 T:	git git://repo.or.cz/linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git
-F:	drivers/platform/x86/thinkpad_acpi.c
+F:	drivers/platform/x86/lenovo/thinkpad_acpi.c
 
 THINKPAD LMI DRIVER
-M:	Mark Pearson <markpearson@lenovo.com>
+M:	Mark Pearson <mpearson-lenovo@squebb.ca>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
 F:	Documentation/ABI/testing/sysfs-class-firmware-attributes
-F:	drivers/platform/x86/think-lmi.?
+F:	drivers/platform/x86/lenovo/think-lmi.?
 
 THP7312 ISP DRIVER
 M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index e5cbd58a99f3..43055df44827 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -120,32 +120,6 @@ config GIGABYTE_WMI
 	  To compile this driver as a module, choose M here: the module will
 	  be called gigabyte-wmi.
 
-config YOGABOOK
-	tristate "Lenovo Yoga Book tablet key driver"
-	depends on ACPI_WMI
-	depends on INPUT
-	depends on I2C
-	select LEDS_CLASS
-	select NEW_LEDS
-	help
-	  Say Y here if you want to support the 'Pen' key and keyboard backlight
-	  control on the Lenovo Yoga Book tablets.
-
-	  To compile this driver as a module, choose M here: the module will
-	  be called lenovo-yogabook.
-
-config YT2_1380
-	tristate "Lenovo Yoga Tablet 2 1380 fast charge driver"
-	depends on SERIAL_DEV_BUS
-	depends on EXTCON
-	depends on ACPI
-	help
-	  Say Y here to enable support for the custom fast charging protocol
-	  found on the Lenovo Yoga Tablet 2 1380F / 1380L models.
-
-	  To compile this driver as a module, choose M here: the module will
-	  be called lenovo-yogabook.
-
 config ACERHDF
 	tristate "Acer Aspire One temperature and fan driver"
 	depends on ACPI_EC && THERMAL
@@ -459,43 +433,6 @@ config IBM_RTL
 	 state = 0 (BIOS SMIs on)
 	 state = 1 (BIOS SMIs off)
 
-config IDEAPAD_LAPTOP
-	tristate "Lenovo IdeaPad Laptop Extras"
-	depends on ACPI
-	depends on RFKILL && INPUT
-	depends on SERIO_I8042
-	depends on BACKLIGHT_CLASS_DEVICE
-	depends on ACPI_VIDEO || ACPI_VIDEO = n
-	depends on ACPI_WMI || ACPI_WMI = n
-	select ACPI_PLATFORM_PROFILE
-	select INPUT_SPARSEKMAP
-	select NEW_LEDS
-	select LEDS_CLASS
-	help
-	  This is a driver for Lenovo IdeaPad netbooks contains drivers for
-	  rfkill switch, hotkey, fan control and backlight control.
-
-config LENOVO_WMI_HOTKEY_UTILITIES
-	tristate "Lenovo Hotkey Utility WMI extras driver"
-	depends on ACPI_WMI
-	select NEW_LEDS
-	select LEDS_CLASS
-	imply IDEAPAD_LAPTOP
-	help
-	  This driver provides WMI support for Lenovo customized hotkeys function,
-	  such as LED control for audio/mic mute event for Ideapad, YOGA, XiaoXin,
-	  Gaming, ThinkBook and so on.
-
-config LENOVO_YMC
-	tristate "Lenovo Yoga Tablet Mode Control"
-	depends on ACPI_WMI
-	depends on INPUT
-	depends on IDEAPAD_LAPTOP
-	select INPUT_SPARSEKMAP
-	help
-	  This driver maps the Tablet Mode Control switch to SW_TABLET_MODE input
-	  events for Lenovo Yoga notebooks.
-
 config SENSORS_HDAPS
 	tristate "Thinkpad Hard Drive Active Protection System (hdaps)"
 	depends on INPUT
@@ -514,160 +451,8 @@ config SENSORS_HDAPS
 	  Say Y here if you have an applicable laptop and want to experience
 	  the awesome power of hdaps.
 
-config THINKPAD_ACPI
-	tristate "ThinkPad ACPI Laptop Extras"
-	depends on ACPI_EC
-	depends on ACPI_BATTERY
-	depends on INPUT
-	depends on RFKILL || RFKILL = n
-	depends on ACPI_VIDEO || ACPI_VIDEO = n
-	depends on BACKLIGHT_CLASS_DEVICE
-	depends on I2C
-	depends on DRM
-	select ACPI_PLATFORM_PROFILE
-	select DRM_PRIVACY_SCREEN
-	select HWMON
-	select NVRAM
-	select NEW_LEDS
-	select LEDS_CLASS
-	select INPUT_SPARSEKMAP
-	help
-	  This is a driver for the IBM and Lenovo ThinkPad laptops. It adds
-	  support for Fn-Fx key combinations, Bluetooth control, video
-	  output switching, ThinkLight control, UltraBay eject and more.
-	  For more information about this driver see
-	  <file:Documentation/admin-guide/laptops/thinkpad-acpi.rst> and
-	  <http://ibm-acpi.sf.net/> .
-
-	  This driver was formerly known as ibm-acpi.
-
-	  Extra functionality will be available if the rfkill (CONFIG_RFKILL)
-	  and/or ALSA (CONFIG_SND) subsystems are available in the kernel.
-	  Note that if you want ThinkPad-ACPI to be built-in instead of
-	  modular, ALSA and rfkill will also have to be built-in.
-
-	  If you have an IBM or Lenovo ThinkPad laptop, say Y or M here.
-
-config THINKPAD_ACPI_ALSA_SUPPORT
-	bool "Console audio control ALSA interface"
-	depends on THINKPAD_ACPI
-	depends on SND
-	depends on SND = y || THINKPAD_ACPI = SND
-	default y
-	help
-	  Enables monitoring of the built-in console audio output control
-	  (headphone and speakers), which is operated by the mute and (in
-	  some ThinkPad models) volume hotkeys.
-
-	  If this option is enabled, ThinkPad-ACPI will export an ALSA card
-	  with a single read-only mixer control, which should be used for
-	  on-screen-display feedback purposes by the Desktop Environment.
-
-	  Optionally, the driver will also allow software control (the
-	  ALSA mixer will be made read-write).  Please refer to the driver
-	  documentation for details.
-
-	  All IBM models have both volume and mute control.  Newer Lenovo
-	  models only have mute control (the volume hotkeys are just normal
-	  keys and volume control is done through the main HDA mixer).
-
-config THINKPAD_ACPI_DEBUGFACILITIES
-	bool "Maintainer debug facilities"
-	depends on THINKPAD_ACPI
-	help
-	  Enables extra stuff in the thinkpad-acpi which is completely useless
-	  for normal use.  Read the driver source to find out what it does.
-
-	  Say N here, unless you were told by a kernel maintainer to do
-	  otherwise.
-
-config THINKPAD_ACPI_DEBUG
-	bool "Verbose debug mode"
-	depends on THINKPAD_ACPI
-	help
-	  Enables extra debugging information, at the expense of a slightly
-	  increase in driver size.
-
-	  If you are not sure, say N here.
-
-config THINKPAD_ACPI_UNSAFE_LEDS
-	bool "Allow control of important LEDs (unsafe)"
-	depends on THINKPAD_ACPI
-	help
-	  Overriding LED state on ThinkPads can mask important
-	  firmware alerts (like critical battery condition), or misled
-	  the user into damaging the hardware (undocking or ejecting
-	  the bay while buses are still active), etc.
-
-	  LED control on the ThinkPad is write-only (with very few
-	  exceptions on very ancient models), which makes it
-	  impossible to know beforehand if important information will
-	  be lost when one changes LED state.
-
-	  Users that know what they are doing can enable this option
-	  and the driver will allow control of every LED, including
-	  the ones on the dock stations.
-
-	  Never enable this option on a distribution kernel.
-
-	  Say N here, unless you are building a kernel for your own
-	  use, and need to control the important firmware LEDs.
-
-config THINKPAD_ACPI_VIDEO
-	bool "Video output control support"
-	depends on THINKPAD_ACPI
-	default y
-	help
-	  Allows the thinkpad_acpi driver to provide an interface to control
-	  the various video output ports.
-
-	  This feature often won't work well, depending on ThinkPad model,
-	  display state, video output devices in use, whether there is a X
-	  server running, phase of the moon, and the current mood of
-	  Schroedinger's cat.  If you can use X.org's RandR to control
-	  your ThinkPad's video output ports instead of this feature,
-	  don't think twice: do it and say N here to save memory and avoid
-	  bad interactions with X.org.
-
-	  NOTE: access to this feature is limited to processes with the
-	  CAP_SYS_ADMIN capability, to avoid local DoS issues in platforms
-	  where it interacts badly with X.org.
-
-	  If you are not sure, say Y here but do try to check if you could
-	  be using X.org RandR instead.
-
-config THINKPAD_ACPI_HOTKEY_POLL
-	bool "Support NVRAM polling for hot keys"
-	depends on THINKPAD_ACPI
-	default y
-	help
-	  Some thinkpad models benefit from NVRAM polling to detect a few of
-	  the hot key press events.  If you know your ThinkPad model does not
-	  need to do NVRAM polling to support any of the hot keys you use,
-	  unselecting this option will save about 1kB of memory.
-
-	  ThinkPads T40 and newer, R52 and newer, and X31 and newer are
-	  unlikely to need NVRAM polling in their latest BIOS versions.
-
-	  NVRAM polling can detect at most the following keys: ThinkPad/Access
-	  IBM, Zoom, Switch Display (fn+F7), ThinkLight, Volume up/down/mute,
-	  Brightness up/down, Display Expand (fn+F8), Hibernate (fn+F12).
-
-	  If you are not sure, say Y here.  The driver enables polling only if
-	  it is strictly necessary to do so.
-
-config THINKPAD_LMI
-	tristate "Lenovo WMI-based systems management driver"
-	depends on ACPI_WMI
-	select FW_ATTR_CLASS
-	help
-	  This driver allows changing BIOS settings on Lenovo machines whose
-	  BIOS support the WMI interface.
-
-	  To compile this driver as a module, choose M here: the module will
-	  be called think-lmi.
-
 source "drivers/platform/x86/intel/Kconfig"
+source "drivers/platform/x86/lenovo/Kconfig"
 
 config ACPI_QUICKSTART
 	tristate "ACPI Quickstart button driver"
@@ -1078,18 +863,6 @@ config INSPUR_PLATFORM_PROFILE
 	To compile this driver as a module, choose M here: the module
 	will be called inspur-platform-profile.
 
-config LENOVO_WMI_CAMERA
-	tristate "Lenovo WMI Camera Button driver"
-	depends on ACPI_WMI
-	depends on INPUT
-	help
-	  This driver provides support for Lenovo camera button. The Camera
-	  button is a GPIO device. This driver receives ACPI notifications when
-	  the camera button is switched on/off.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called lenovo-wmi-camera.
-
 config DASHARO_ACPI
 	tristate "Dasharo ACPI Platform Driver"
 	depends on ACPI
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index abbc2644ff6d..0530a224bebd 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -58,17 +58,12 @@ obj-$(CONFIG_X86_PLATFORM_DRIVERS_HP)	+= hp/
 # Hewlett Packard Enterprise
 obj-$(CONFIG_UV_SYSFS)       += uv_sysfs.o
 
-# IBM Thinkpad and Lenovo
+# IBM Thinkpad (before 2005)
 obj-$(CONFIG_IBM_RTL)		+= ibm_rtl.o
-obj-$(CONFIG_IDEAPAD_LAPTOP)	+= ideapad-laptop.o
-obj-$(CONFIG_LENOVO_WMI_HOTKEY_UTILITIES)	+= lenovo-wmi-hotkey-utilities.o
-obj-$(CONFIG_LENOVO_YMC)	+= lenovo-ymc.o
 obj-$(CONFIG_SENSORS_HDAPS)	+= hdaps.o
-obj-$(CONFIG_THINKPAD_ACPI)	+= thinkpad_acpi.o
-obj-$(CONFIG_THINKPAD_LMI)	+= think-lmi.o
-obj-$(CONFIG_YOGABOOK)		+= lenovo-yogabook.o
-obj-$(CONFIG_YT2_1380)		+= lenovo-yoga-tab2-pro-1380-fastcharger.o
-obj-$(CONFIG_LENOVO_WMI_CAMERA)	+= lenovo-wmi-camera.o
+
+# Lenovo
+obj-y				+= lenovo/
 
 # Intel
 obj-y				+= intel/
diff --git a/drivers/platform/x86/lenovo/Kconfig b/drivers/platform/x86/lenovo/Kconfig
new file mode 100644
index 000000000000..a4b565283768
--- /dev/null
+++ b/drivers/platform/x86/lenovo/Kconfig
@@ -0,0 +1,234 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Lenovo X86 Platform Specific Drivers
+#
+
+config IDEAPAD_LAPTOP
+	tristate "Lenovo IdeaPad Laptop Extras"
+	depends on ACPI
+	depends on RFKILL && INPUT
+	depends on SERIO_I8042
+	depends on BACKLIGHT_CLASS_DEVICE
+	depends on ACPI_VIDEO || ACPI_VIDEO = n
+	depends on ACPI_WMI || ACPI_WMI = n
+	select ACPI_PLATFORM_PROFILE
+	select INPUT_SPARSEKMAP
+	select NEW_LEDS
+	select LEDS_CLASS
+	help
+	  This is a driver for Lenovo IdeaPad netbooks contains drivers for
+	  rfkill switch, hotkey, fan control and backlight control.
+
+config LENOVO_WMI_HOTKEY_UTILITIES
+	tristate "Lenovo Hotkey Utility WMI extras driver"
+	depends on ACPI_WMI
+	select NEW_LEDS
+	select LEDS_CLASS
+	imply IDEAPAD_LAPTOP
+	help
+	  This driver provides WMI support for Lenovo customized hotkeys function,
+	  such as LED control for audio/mic mute event for Ideapad, YOGA, XiaoXin,
+	  Gaming, ThinkBook and so on.
+
+config LENOVO_WMI_CAMERA
+	tristate "Lenovo WMI Camera Button driver"
+	depends on ACPI_WMI
+	depends on INPUT
+	help
+	  This driver provides support for Lenovo camera button. The Camera
+	  button is a GPIO device. This driver receives ACPI notifications when
+	  the camera button is switched on/off.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called lenovo-wmi-camera.
+
+config LENOVO_YMC
+	tristate "Lenovo Yoga Tablet Mode Control"
+	depends on ACPI_WMI
+	depends on INPUT
+	depends on IDEAPAD_LAPTOP
+	select INPUT_SPARSEKMAP
+	help
+	  This driver maps the Tablet Mode Control switch to SW_TABLET_MODE input
+	  events for Lenovo Yoga notebooks.
+
+config THINKPAD_ACPI
+	tristate "ThinkPad ACPI Laptop Extras"
+	depends on ACPI_EC
+	depends on ACPI_BATTERY
+	depends on INPUT
+	depends on RFKILL || RFKILL = n
+	depends on ACPI_VIDEO || ACPI_VIDEO = n
+	depends on BACKLIGHT_CLASS_DEVICE
+	depends on I2C
+	depends on DRM
+	select ACPI_PLATFORM_PROFILE
+	select DRM_PRIVACY_SCREEN
+	select HWMON
+	select NVRAM
+	select NEW_LEDS
+	select LEDS_CLASS
+	select INPUT_SPARSEKMAP
+	help
+	  This is a driver for the IBM and Lenovo ThinkPad laptops. It adds
+	  support for Fn-Fx key combinations, Bluetooth control, video
+	  output switching, ThinkLight control, UltraBay eject and more.
+	  For more information about this driver see
+	  <file:Documentation/admin-guide/laptops/thinkpad-acpi.rst> and
+	  <http://ibm-acpi.sf.net/> .
+
+	  This driver was formerly known as ibm-acpi.
+
+	  Extra functionality will be available if the rfkill (CONFIG_RFKILL)
+	  and/or ALSA (CONFIG_SND) subsystems are available in the kernel.
+	  Note that if you want ThinkPad-ACPI to be built-in instead of
+	  modular, ALSA and rfkill will also have to be built-in.
+
+	  If you have an IBM or Lenovo ThinkPad laptop, say Y or M here.
+
+config THINKPAD_ACPI_ALSA_SUPPORT
+	bool "Console audio control ALSA interface"
+	depends on THINKPAD_ACPI
+	depends on SND
+	depends on SND = y || THINKPAD_ACPI = SND
+	default y
+	help
+	  Enables monitoring of the built-in console audio output control
+	  (headphone and speakers), which is operated by the mute and (in
+	  some ThinkPad models) volume hotkeys.
+
+	  If this option is enabled, ThinkPad-ACPI will export an ALSA card
+	  with a single read-only mixer control, which should be used for
+	  on-screen-display feedback purposes by the Desktop Environment.
+
+	  Optionally, the driver will also allow software control (the
+	  ALSA mixer will be made read-write).  Please refer to the driver
+	  documentation for details.
+
+	  All IBM models have both volume and mute control.  Newer Lenovo
+	  models only have mute control (the volume hotkeys are just normal
+	  keys and volume control is done through the main HDA mixer).
+
+config THINKPAD_ACPI_DEBUGFACILITIES
+	bool "Maintainer debug facilities"
+	depends on THINKPAD_ACPI
+	help
+	  Enables extra stuff in the thinkpad-acpi which is completely useless
+	  for normal use.  Read the driver source to find out what it does.
+
+	  Say N here, unless you were told by a kernel maintainer to do
+	  otherwise.
+
+config THINKPAD_ACPI_DEBUG
+	bool "Verbose debug mode"
+	depends on THINKPAD_ACPI
+	help
+	  Enables extra debugging information, at the expense of a slightly
+	  increase in driver size.
+
+	  If you are not sure, say N here.
+
+config THINKPAD_ACPI_UNSAFE_LEDS
+	bool "Allow control of important LEDs (unsafe)"
+	depends on THINKPAD_ACPI
+	help
+	  Overriding LED state on ThinkPads can mask important
+	  firmware alerts (like critical battery condition), or misled
+	  the user into damaging the hardware (undocking or ejecting
+	  the bay while buses are still active), etc.
+
+	  LED control on the ThinkPad is write-only (with very few
+	  exceptions on very ancient models), which makes it
+	  impossible to know beforehand if important information will
+	  be lost when one changes LED state.
+
+	  Users that know what they are doing can enable this option
+	  and the driver will allow control of every LED, including
+	  the ones on the dock stations.
+
+	  Never enable this option on a distribution kernel.
+
+	  Say N here, unless you are building a kernel for your own
+	  use, and need to control the important firmware LEDs.
+
+config THINKPAD_ACPI_VIDEO
+	bool "Video output control support"
+	depends on THINKPAD_ACPI
+	default y
+	help
+	  Allows the thinkpad_acpi driver to provide an interface to control
+	  the various video output ports.
+
+	  This feature often won't work well, depending on ThinkPad model,
+	  display state, video output devices in use, whether there is a X
+	  server running, phase of the moon, and the current mood of
+	  Schroedinger's cat.  If you can use X.org's RandR to control
+	  your ThinkPad's video output ports instead of this feature,
+	  don't think twice: do it and say N here to save memory and avoid
+	  bad interactions with X.org.
+
+	  NOTE: access to this feature is limited to processes with the
+	  CAP_SYS_ADMIN capability, to avoid local DoS issues in platforms
+	  where it interacts badly with X.org.
+
+	  If you are not sure, say Y here but do try to check if you could
+	  be using X.org RandR instead.
+
+config THINKPAD_ACPI_HOTKEY_POLL
+	bool "Support NVRAM polling for hot keys"
+	depends on THINKPAD_ACPI
+	default y
+	help
+	  Some thinkpad models benefit from NVRAM polling to detect a few of
+	  the hot key press events.  If you know your ThinkPad model does not
+	  need to do NVRAM polling to support any of the hot keys you use,
+	  unselecting this option will save about 1kB of memory.
+
+	  ThinkPads T40 and newer, R52 and newer, and X31 and newer are
+	  unlikely to need NVRAM polling in their latest BIOS versions.
+
+	  NVRAM polling can detect at most the following keys: ThinkPad/Access
+	  IBM, Zoom, Switch Display (fn+F7), ThinkLight, Volume up/down/mute,
+	  Brightness up/down, Display Expand (fn+F8), Hibernate (fn+F12).
+
+	  If you are not sure, say Y here.  The driver enables polling only if
+	  it is strictly necessary to do so.
+
+config THINKPAD_LMI
+	tristate "Lenovo WMI-based systems management driver"
+	depends on ACPI_WMI
+	select FW_ATTR_CLASS
+	help
+	  This driver allows changing BIOS settings on Lenovo machines whose
+	  BIOS support the WMI interface.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called think-lmi.
+
+config YOGABOOK
+	tristate "Lenovo Yoga Book tablet key driver"
+	depends on ACPI_WMI
+	depends on INPUT
+	depends on I2C
+	select LEDS_CLASS
+	select NEW_LEDS
+	help
+	  Say Y here if you want to support the 'Pen' key and keyboard backlight
+	  control on the Lenovo Yoga Book tablets.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called lenovo-yogabook.
+
+config YT2_1380
+	tristate "Lenovo Yoga Tablet 2 1380 fast charge driver"
+	depends on SERIAL_DEV_BUS
+	depends on EXTCON
+	depends on ACPI
+	help
+	  Say Y here to enable support for the custom fast charging protocol
+	  found on the Lenovo Yoga Tablet 2 1380F / 1380L models.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called lenovo-yogabook.
+
+
diff --git a/drivers/platform/x86/lenovo/Makefile b/drivers/platform/x86/lenovo/Makefile
new file mode 100644
index 000000000000..f1aa2449293b
--- /dev/null
+++ b/drivers/platform/x86/lenovo/Makefile
@@ -0,0 +1,23 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for linux/drivers/platform/x86/lenovo
+# Lenovo x86 Platform Specific Drivers
+#
+obj-$(CONFIG_IDEAPAD_LAPTOP)	+= ideapad-laptop.o
+obj-$(CONFIG_THINKPAD_LMI)	+= think-lmi.o
+obj-$(CONFIG_THINKPAD_ACPI)	+= thinkpad_acpi.o
+
+lenovo-target-$(CONFIG_LENOVO_WMI_HOTKEY_UTILITIES)	+= wmi-hotkey-utilities.o
+lenovo-target-$(CONFIG_LENOVO_YMC)	+= ymc.o
+lenovo-target-$(CONFIG_YOGABOOK)	+= yogabook.o
+lenovo-target-$(CONFIG_YT2_1380)	+= yoga-tab2-pro-1380-fastcharger.o
+lenovo-target-$(CONFIG_LENOVO_WMI_CAMERA)	+= wmi-camera.o
+
+# Add 'lenovo' prefix to each module listed in lenovo-target-*
+define LENOVO_OBJ_TARGET
+lenovo-$(1)-y := $(1).o
+obj-$(2) += lenovo-$(1).o
+endef
+
+$(foreach target, $(basename $(lenovo-target-y)), $(eval $(call LENOVO_OBJ_TARGET,$(target),y)))
+$(foreach target, $(basename $(lenovo-target-m)), $(eval $(call LENOVO_OBJ_TARGET,$(target),m)))
diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/lenovo/ideapad-laptop.c
similarity index 100%
rename from drivers/platform/x86/ideapad-laptop.c
rename to drivers/platform/x86/lenovo/ideapad-laptop.c
diff --git a/drivers/platform/x86/ideapad-laptop.h b/drivers/platform/x86/lenovo/ideapad-laptop.h
similarity index 100%
rename from drivers/platform/x86/ideapad-laptop.h
rename to drivers/platform/x86/lenovo/ideapad-laptop.h
diff --git a/drivers/platform/x86/think-lmi.c b/drivers/platform/x86/lenovo/think-lmi.c
similarity index 99%
rename from drivers/platform/x86/think-lmi.c
rename to drivers/platform/x86/lenovo/think-lmi.c
index 00b1e7c79a3d..143d9fdedb65 100644
--- a/drivers/platform/x86/think-lmi.c
+++ b/drivers/platform/x86/lenovo/think-lmi.c
@@ -20,7 +20,7 @@
 #include <linux/types.h>
 #include <linux/dmi.h>
 #include <linux/wmi.h>
-#include "firmware_attributes_class.h"
+#include "../firmware_attributes_class.h"
 #include "think-lmi.h"
 
 static bool debug_support;
diff --git a/drivers/platform/x86/think-lmi.h b/drivers/platform/x86/lenovo/think-lmi.h
similarity index 100%
rename from drivers/platform/x86/think-lmi.h
rename to drivers/platform/x86/lenovo/think-lmi.h
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/lenovo/thinkpad_acpi.c
similarity index 99%
rename from drivers/platform/x86/thinkpad_acpi.c
rename to drivers/platform/x86/lenovo/thinkpad_acpi.c
index e7350c9fa3aa..e1c7bd06fa12 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/lenovo/thinkpad_acpi.c
@@ -81,7 +81,7 @@
 #include <sound/core.h>
 #include <sound/initval.h>
 
-#include "dual_accel_detect.h"
+#include "../dual_accel_detect.h"
 
 /* ThinkPad CMOS commands */
 #define TP_CMOS_VOLUME_DOWN	0
diff --git a/drivers/platform/x86/lenovo-wmi-camera.c b/drivers/platform/x86/lenovo/wmi-camera.c
similarity index 100%
rename from drivers/platform/x86/lenovo-wmi-camera.c
rename to drivers/platform/x86/lenovo/wmi-camera.c
diff --git a/drivers/platform/x86/lenovo-wmi-hotkey-utilities.c b/drivers/platform/x86/lenovo/wmi-hotkey-utilities.c
similarity index 100%
rename from drivers/platform/x86/lenovo-wmi-hotkey-utilities.c
rename to drivers/platform/x86/lenovo/wmi-hotkey-utilities.c
diff --git a/drivers/platform/x86/lenovo-ymc.c b/drivers/platform/x86/lenovo/ymc.c
similarity index 100%
rename from drivers/platform/x86/lenovo-ymc.c
rename to drivers/platform/x86/lenovo/ymc.c
diff --git a/drivers/platform/x86/lenovo-yoga-tab2-pro-1380-fastcharger.c b/drivers/platform/x86/lenovo/yoga-tab2-pro-1380-fastcharger.c
similarity index 99%
rename from drivers/platform/x86/lenovo-yoga-tab2-pro-1380-fastcharger.c
rename to drivers/platform/x86/lenovo/yoga-tab2-pro-1380-fastcharger.c
index 25933cd018d1..b3fd6a35052a 100644
--- a/drivers/platform/x86/lenovo-yoga-tab2-pro-1380-fastcharger.c
+++ b/drivers/platform/x86/lenovo/yoga-tab2-pro-1380-fastcharger.c
@@ -21,7 +21,7 @@
 #include <linux/time.h>
 #include <linux/types.h>
 #include <linux/workqueue.h>
-#include "serdev_helpers.h"
+#include "../serdev_helpers.h"
 
 #define YT2_1380_FC_PDEV_NAME		"lenovo-yoga-tab2-pro-1380-fastcharger"
 #define YT2_1380_FC_SERDEV_CTRL		"serial0"
diff --git a/drivers/platform/x86/lenovo-yogabook.c b/drivers/platform/x86/lenovo/yogabook.c
similarity index 100%
rename from drivers/platform/x86/lenovo-yogabook.c
rename to drivers/platform/x86/lenovo/yogabook.c
-- 
2.43.0

[PATCH v3 2/2] platform/x86: thinklmi: improved DMI handling

[Mark Pearson]

Fix issues reported by kernel test robot.
 - Require DMI for think-lmi.
 - Check return from getting serial string

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506062319.F0IpDxF6-lkp@intel.com/

Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
---
 - New patch added to series.

 drivers/platform/x86/lenovo/Kconfig     | 1 +
 drivers/platform/x86/lenovo/think-lmi.c | 8 +++++---
 2 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/platform/x86/lenovo/Kconfig b/drivers/platform/x86/lenovo/Kconfig
index a4b565283768..207dd7f88ed0 100644
--- a/drivers/platform/x86/lenovo/Kconfig
+++ b/drivers/platform/x86/lenovo/Kconfig
@@ -197,6 +197,7 @@ config THINKPAD_ACPI_HOTKEY_POLL
 config THINKPAD_LMI
 	tristate "Lenovo WMI-based systems management driver"
 	depends on ACPI_WMI
+	depends on DMI
 	select FW_ATTR_CLASS
 	help
 	  This driver allows changing BIOS settings on Lenovo machines whose
diff --git a/drivers/platform/x86/lenovo/think-lmi.c b/drivers/platform/x86/lenovo/think-lmi.c
index 143d9fdedb65..8f70c60f791f 100644
--- a/drivers/platform/x86/lenovo/think-lmi.c
+++ b/drivers/platform/x86/lenovo/think-lmi.c
@@ -772,6 +772,7 @@ static ssize_t certificate_store(struct kobject *kobj,
 	struct tlmi_pwd_setting *setting = to_tlmi_pwd_setting(kobj);
 	enum cert_install_mode install_mode = TLMI_CERT_INSTALL;
 	char *auth_str, *new_cert;
+	const char *serial;
 	char *signature;
 	char *guid;
 	int ret;
@@ -789,9 +790,10 @@ static ssize_t certificate_store(struct kobject *kobj,
 			return -EACCES;
 
 		/* Format: 'serial#, signature' */
-		auth_str = cert_command(setting,
-					dmi_get_system_info(DMI_PRODUCT_SERIAL),
-					setting->signature);
+		serial = dmi_get_system_info(DMI_PRODUCT_SERIAL);
+		if (!serial)
+			return -EINVAL;
+		auth_str = cert_command(setting, serial, setting->signature);
 		if (!auth_str)
 			return -ENOMEM;
 
-- 
2.43.0

Re: [PATCH v3 1/2] platform/x86: Move Lenovo files into lenovo subdir

[Andy Shevchenko]

On Mon, Jun 09, 2025 at 08:27:24AM -0400, Mark Pearson wrote:
> Create lenovo subdirectory for holding Lenovo specific drivers.

...

>  LENOVO WMI HOTKEY UTILITIES DRIVER
>  M:	Jackie Dong <xy-jackie@139.com>
>  L:	platform-driver-x86@vger.kernel.org
>  S:	Maintained
> -F:	drivers/platform/x86/lenovo-wmi-hotkey-utilities.c
> +F:	drivers/platform/x86/lenovo/lenovo-wmi-hotkey-utilities.c

Is this correct?

Otherwise LGTM.

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v3 2/2] platform/x86: thinklmi: improved DMI handling

[Andy Shevchenko]

On Mon, Jun 09, 2025 at 08:27:25AM -0400, Mark Pearson wrote:
> Fix issues reported by kernel test robot.
>  - Require DMI for think-lmi.
>  - Check return from getting serial string
> 
> Reported-by: kernel test robot <lkp@intel.com>
> Closes: https://lore.kernel.org/oe-kbuild-all/202506062319.F0IpDxF6-lkp@intel.com/

> 

No blank line in tag block.

> Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>

>  - New patch added to series.

Shouldn't it be the first one in the series? It seems to me that this is the
fix of the original code as well.

...

> +++ b/drivers/platform/x86/lenovo/think-lmi.c

My understanding is that you need either Kconfig or changing C file.

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v3 1/2] platform/x86: Move Lenovo files into lenovo subdir

[Mark Pearson]

Thanks Andy,

On Mon, Jun 9, 2025, at 4:17 PM, Andy Shevchenko wrote:
> On Mon, Jun 09, 2025 at 08:27:24AM -0400, Mark Pearson wrote:
>> Create lenovo subdirectory for holding Lenovo specific drivers.
>
> ...
>
>>  LENOVO WMI HOTKEY UTILITIES DRIVER
>>  M:	Jackie Dong <xy-jackie@139.com>
>>  L:	platform-driver-x86@vger.kernel.org
>>  S:	Maintained
>> -F:	drivers/platform/x86/lenovo-wmi-hotkey-utilities.c
>> +F:	drivers/platform/x86/lenovo/lenovo-wmi-hotkey-utilities.c
>
> Is this correct?
>
Jackie is on my team, he wrote this driver originally (with some help) for one of the thinkbook platforms.
If there are any changes he should review them as he has access to the HW, but I'll be helping too.
I think it's fine - let me know if otherwise.

Just as background: We can't use our Lenovo email addresses for kernel contributions. They're based on an awful Outlook server that is incapable of handling text only emails, and also won't play nice with any other tooling (including git send-email). Not ideal but it is what it is, and I gave up fighting with IT about it (there are some workarounds, but they're arguably worse).

> Otherwise LGTM.
>
Thanks for the review
Mark

Re: [PATCH v3 2/2] platform/x86: thinklmi: improved DMI handling

[Mark Pearson]

Hi Andy

On Mon, Jun 9, 2025, at 4:19 PM, Andy Shevchenko wrote:
> On Mon, Jun 09, 2025 at 08:27:25AM -0400, Mark Pearson wrote:
>> Fix issues reported by kernel test robot.
>>  - Require DMI for think-lmi.
>>  - Check return from getting serial string
>> 
>> Reported-by: kernel test robot <lkp@intel.com>
>> Closes: https://lore.kernel.org/oe-kbuild-all/202506062319.F0IpDxF6-lkp@intel.com/
>
>> 
>
> No blank line in tag block.

Oh - I'd not come across that requirement before. I can fix.

>
>> Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
>
>>  - New patch added to series.
>
> Shouldn't it be the first one in the series? It seems to me that this is the
> fix of the original code as well.

I guess. I'll re-order.

>
> ...
>
>> +++ b/drivers/platform/x86/lenovo/think-lmi.c
>
> My understanding is that you need either Kconfig or changing C file.

Does it matter? I figured both were valid. Adding the DMI to the Kconfig makes sure it's used and checking the return code felt sensible.

If you object I'll go with just the Kconfig but I thought the extra check had value and was related to the reported issue so did it as well. Let me know if you feel strongly about it.

Thanks
Mark

Re: [PATCH v3 2/2] platform/x86: thinklmi: improved DMI handling

[Ilpo Järvinen]

On Mon, 9 Jun 2025, Mark Pearson wrote:

> Fix issues reported by kernel test robot.
>  - Require DMI for think-lmi.
>  - Check return from getting serial string
> 
> Reported-by: kernel test robot <lkp@intel.com>
> Closes: https://lore.kernel.org/oe-kbuild-all/202506062319.F0IpDxF6-lkp@intel.com/
> 
> Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
> ---
>  - New patch added to series.
> 
>  drivers/platform/x86/lenovo/Kconfig     | 1 +
>  drivers/platform/x86/lenovo/think-lmi.c | 8 +++++---
>  2 files changed, 6 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/platform/x86/lenovo/Kconfig b/drivers/platform/x86/lenovo/Kconfig
> index a4b565283768..207dd7f88ed0 100644
> --- a/drivers/platform/x86/lenovo/Kconfig
> +++ b/drivers/platform/x86/lenovo/Kconfig
> @@ -197,6 +197,7 @@ config THINKPAD_ACPI_HOTKEY_POLL
>  config THINKPAD_LMI
>  	tristate "Lenovo WMI-based systems management driver"
>  	depends on ACPI_WMI
> +	depends on DMI
>  	select FW_ATTR_CLASS
>  	help
>  	  This driver allows changing BIOS settings on Lenovo machines whose
> diff --git a/drivers/platform/x86/lenovo/think-lmi.c b/drivers/platform/x86/lenovo/think-lmi.c
> index 143d9fdedb65..8f70c60f791f 100644
> --- a/drivers/platform/x86/lenovo/think-lmi.c
> +++ b/drivers/platform/x86/lenovo/think-lmi.c
> @@ -772,6 +772,7 @@ static ssize_t certificate_store(struct kobject *kobj,
>  	struct tlmi_pwd_setting *setting = to_tlmi_pwd_setting(kobj);
>  	enum cert_install_mode install_mode = TLMI_CERT_INSTALL;
>  	char *auth_str, *new_cert;
> +	const char *serial;
>  	char *signature;
>  	char *guid;
>  	int ret;
> @@ -789,9 +790,10 @@ static ssize_t certificate_store(struct kobject *kobj,
>  			return -EACCES;
>  
>  		/* Format: 'serial#, signature' */
> -		auth_str = cert_command(setting,
> -					dmi_get_system_info(DMI_PRODUCT_SERIAL),
> -					setting->signature);
> +		serial = dmi_get_system_info(DMI_PRODUCT_SERIAL);
> +		if (!serial)
> +			return -EINVAL;

This should not return -EINVAL as it is not a problem with the input 
parameters. Perhaps -ENODEV would make sense instead?

> +		auth_str = cert_command(setting, serial, setting->signature);
>  		if (!auth_str)
>  			return -ENOMEM;
>  
> 

-- 
 i.

Re: [PATCH v3 1/2] platform/x86: Move Lenovo files into lenovo subdir

[Andy Shevchenko]

On Mon, Jun 09, 2025 at 09:21:45PM -0400, Mark Pearson wrote:
> On Mon, Jun 9, 2025, at 4:17 PM, Andy Shevchenko wrote:
> > On Mon, Jun 09, 2025 at 08:27:24AM -0400, Mark Pearson wrote:

...

> >> -F:	drivers/platform/x86/lenovo-wmi-hotkey-utilities.c
> >> +F:	drivers/platform/x86/lenovo/lenovo-wmi-hotkey-utilities.c
> >
> > Is this correct?
> >
> Jackie is on my team, he wrote this driver originally (with some help) for one of the thinkbook platforms.
> If there are any changes he should review them as he has access to the HW, but I'll be helping too.
> I think it's fine - let me know if otherwise.
> 
> Just as background: We can't use our Lenovo email addresses for kernel
> contributions. They're based on an awful Outlook server that is incapable of
> handling text only emails, and also won't play nice with any other tooling
> (including git send-email). Not ideal but it is what it is, and I gave up
> fighting with IT about it (there are some workarounds, but they're arguably
> worse).
> 
> > Otherwise LGTM.

What I'm talking about is the filename.

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v3 2/2] platform/x86: thinklmi: improved DMI handling

[Mark Pearson]

Hi Ilpo,

On Tue, Jun 10, 2025, at 3:35 AM, Ilpo Järvinen wrote:
> On Mon, 9 Jun 2025, Mark Pearson wrote:
>
>> Fix issues reported by kernel test robot.
>>  - Require DMI for think-lmi.
>>  - Check return from getting serial string
>> 
>> Reported-by: kernel test robot <lkp@intel.com>
>> Closes: https://lore.kernel.org/oe-kbuild-all/202506062319.F0IpDxF6-lkp@intel.com/
>> 
>> Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
>> ---
>>  - New patch added to series.
>> 
>>  drivers/platform/x86/lenovo/Kconfig     | 1 +
>>  drivers/platform/x86/lenovo/think-lmi.c | 8 +++++---
>>  2 files changed, 6 insertions(+), 3 deletions(-)
>> 
>> diff --git a/drivers/platform/x86/lenovo/Kconfig b/drivers/platform/x86/lenovo/Kconfig
>> index a4b565283768..207dd7f88ed0 100644
>> --- a/drivers/platform/x86/lenovo/Kconfig
>> +++ b/drivers/platform/x86/lenovo/Kconfig
>> @@ -197,6 +197,7 @@ config THINKPAD_ACPI_HOTKEY_POLL
>>  config THINKPAD_LMI
>>  	tristate "Lenovo WMI-based systems management driver"
>>  	depends on ACPI_WMI
>> +	depends on DMI
>>  	select FW_ATTR_CLASS
>>  	help
>>  	  This driver allows changing BIOS settings on Lenovo machines whose
>> diff --git a/drivers/platform/x86/lenovo/think-lmi.c b/drivers/platform/x86/lenovo/think-lmi.c
>> index 143d9fdedb65..8f70c60f791f 100644
>> --- a/drivers/platform/x86/lenovo/think-lmi.c
>> +++ b/drivers/platform/x86/lenovo/think-lmi.c
>> @@ -772,6 +772,7 @@ static ssize_t certificate_store(struct kobject *kobj,
>>  	struct tlmi_pwd_setting *setting = to_tlmi_pwd_setting(kobj);
>>  	enum cert_install_mode install_mode = TLMI_CERT_INSTALL;
>>  	char *auth_str, *new_cert;
>> +	const char *serial;
>>  	char *signature;
>>  	char *guid;
>>  	int ret;
>> @@ -789,9 +790,10 @@ static ssize_t certificate_store(struct kobject *kobj,
>>  			return -EACCES;
>>  
>>  		/* Format: 'serial#, signature' */
>> -		auth_str = cert_command(setting,
>> -					dmi_get_system_info(DMI_PRODUCT_SERIAL),
>> -					setting->signature);
>> +		serial = dmi_get_system_info(DMI_PRODUCT_SERIAL);
>> +		if (!serial)
>> +			return -EINVAL;
>
> This should not return -EINVAL as it is not a problem with the input 
> parameters. Perhaps -ENODEV would make sense instead?
>

Good point.
Unless Andy strongly thinks I should drop this bit, I'll fix in the next version

Thanks
Mark

Re: [PATCH v3 2/2] platform/x86: thinklmi: improved DMI handling

[Andy Shevchenko]

On Tue, Jun 10, 2025 at 08:28:49AM -0400, Mark Pearson wrote:
> On Tue, Jun 10, 2025, at 3:35 AM, Ilpo Järvinen wrote:
> > On Mon, 9 Jun 2025, Mark Pearson wrote:

...

> >> +		serial = dmi_get_system_info(DMI_PRODUCT_SERIAL);
> >> +		if (!serial)
> >> +			return -EINVAL;
> >
> > This should not return -EINVAL as it is not a problem with the input 
> > parameters. Perhaps -ENODEV would make sense instead?
> 
> Good point.
> Unless Andy strongly thinks I should drop this bit, I'll fix in the next version

If maintainers are okay to take this approach (both Kconfig and C file
changes), I am fine.

-- 
With Best Regards,
Andy Shevchenko