Re: [PATCH 1/2] hwmon: (cgbc-hwmon): Fix current sensors ID lookup

[Guenter Roeck <linux@roeck-us.net>]

On 9/11/26 00:23, Thomas Richard wrote:
> On 9/11/26 2:58 AM, Guenter Roeck wrote:
>> On Thu, Sep 10, 2026 at 03:28:21PM +0200, Thomas Richard (congatec GmbH) wrote:
>>> Current sensors on the Congatec Board Controller don't use consecutive IDs,
>>> unlike other sensor types (voltage, temperature, fan). The driver assumed
>>> consecutive IDs and performed a simple lookup, which caused an unknown
>>> sensor warning. Define current sensor IDs explicitly.
>>>
>>> Changes the warning on conga-SA7 (type and channel are correct now).
>>> Before:
>>>    Board Controller returned an unknown sensor (type=2, channel=17), ignore it
>>> After:
>>>    Board Controller returned an unknown sensor (bc_type=1, bc_id=11), ignore it
>>>
>>> Cc: stable@kernel.org
>>> Fixes: 08ebc9def79f ("hwmon: Add Congatec Board Controller monitoring driver")
>>> Signed-off-by: Thomas Richard (congatec GmbH) <thomas.richard@bootlin.com>
>>
>> Applied.
>>
> 
> You pointed me that Sashiko reported a missing cgbc_hwmon_info array but
> you applied the patch. Should I send a v2 or an other patch to fix it?
> 
Sorry, too much going on. Either way is fine.

Thanks for the reminder.

Guenter