Re: [PATCH v2 RESEND] design: fix typos in design.rst

[Lorenzo Stoakes <ljs@kernel.org>]

On Sun, May 17, 2026 at 04:34:26PM +0900, Sakurai Shun wrote:
> L140: "unsinged" -> "unsigned"
> L371: "sampleing" -> "sampling"
> L387: "multipled" -> "multiplied"
>
> Signed-off-by: Sakurai Shun <ssh1326@icloud.com>

LGTM, so:

Reviewed-by: Lorenzo Stoakes <ljs@kernel.org>

> ---
>  Documentation/mm/damon/design.rst | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/mm/damon/design.rst b/Documentation/mm/damon/design.rst
> index afc7d52bd..9cc70a296 100644
> --- a/Documentation/mm/damon/design.rst
> +++ b/Documentation/mm/damon/design.rst
> @@ -140,7 +140,7 @@ as Idle page tracking does.
>  Address Unit
>  ------------
>
> -DAMON core layer uses ``unsinged long`` type for monitoring target address
> +DAMON core layer uses ``unsigned long`` type for monitoring target address
>  ranges.  In some cases, the address space for a given operations set could be
>  too large to be handled with the type.  ARM (32-bit) with large physical
>  address extension is an example.  For such cases, a per-operations set
> @@ -371,7 +371,7 @@ with theoretical maximum ``nr_accesses``, which can be calculated as
>  ``aggregation interval / sampling interval``.
>
>  The mechanism calculates the ratio of access events for ``aggrs`` aggregations,
> -and increases or decrease the ``sampleing interval`` and ``aggregation
> +and increases or decrease the ``sampling interval`` and ``aggregation
>  interval`` in same ratio, if the observed access ratio is lower or higher than
>  the target, respectively.  The ratio of the intervals change is decided in
>  proportion to the distance between current samples ratio and the target ratio.
> @@ -387,7 +387,7 @@ The tuning is turned off by default, and need to be set explicitly by the user.
>  As a rule of thumbs and the Parreto principle, 4% access samples ratio target
>  is recommended.  Note that Parreto principle (80/20 rule) has applied twice.
>  That is, assumes 4% (20% of 20%) DAMON-observed access events ratio (source)
> -to capture 64% (80% multipled by 80%) real access events (outcomes).
> +to capture 64% (80% multiplied by 80%) real access events (outcomes).
>
>  To know how user-space can use this feature via :ref:`DAMON sysfs interface
>  <sysfs_interface>`, refer to :ref:`intervals_goal
> --
> 2.54.0
>