Re: [PATCH v4 5/6] arm64/boot: Enable EL2 requirements for FEAT_Debugv8p9

[Will Deacon <will@kernel.org>]

On Tue, Apr 07, 2026 at 09:29:47AM -0500, Rob Herring (Arm) wrote:
> From: Anshuman Khandual <anshuman.khandual@arm.com>
> 
> Fine grained trap control for MDSELR_EL1 register needs to be configured in
> HDFGRTR2_EL2, and HDFGWTR2_EL2 registers when kernel enters at EL1, but EL2
> is also present.
> 
> MDCR_EL2.EBWE needs to be enabled for additional (beyond 16) breakpoint and
> watchpoint exceptions when kernel enters at EL1, but EL2 is also present.
> 
> While here, also update booting.rst with MDCR_EL3 and SCR_EL3 requirements.
> 
> Cc: Marc Zyngier <maz@kernel.org>
> Cc: Oliver Upton <oliver.upton@linux.dev>
> Cc: kvmarm@lists.linux.dev
> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
> Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
> ---
> v4:
>  - Add that the requirements only apply when there are >16
>    breakpoints/watchpoints
>  - Adapt to changes in v7.0-rc1
> ---
>  Documentation/arch/arm64/booting.rst | 13 +++++++++++++
>  arch/arm64/include/asm/el2_setup.h   | 14 ++++++++++++++
>  2 files changed, 27 insertions(+)
> 
> diff --git a/Documentation/arch/arm64/booting.rst b/Documentation/arch/arm64/booting.rst
> index 13ef311dace8..00ba91bbd278 100644
> --- a/Documentation/arch/arm64/booting.rst
> +++ b/Documentation/arch/arm64/booting.rst
> @@ -369,6 +369,19 @@ Before jumping into the kernel, the following conditions must be met:
>      - ZCR_EL2.LEN must be initialised to the same value for all CPUs the
>        kernel will execute on.
>  
> +  For CPUs with FEAT_Debugv8p9 extension present and >16 breakpoints or
> +  watchpoints:
> +
> +  - If the kernel is entered at EL1 and EL2 is present:
> +
> +    - HDFGRTR2_EL2.nMDSELR_EL1 (bit 5) must be initialized to 0b1
> +    - HDFGWTR2_EL2.nMDSELR_EL1 (bit 5) must be initialized to 0b1
> +    - MDCR_EL2.EBWE (bit 43) must be initialized to 0b1
> +
> +  - If EL3 is present:
> +
> +    - MDCR_EL3.EBWE (bit 43) must be initialized to 0b1
> +
>    For CPUs with the Scalable Matrix Extension (FEAT_SME):
>  
>    - If EL3 is present:
> diff --git a/arch/arm64/include/asm/el2_setup.h b/arch/arm64/include/asm/el2_setup.h
> index 85f4c1615472..b51a280c18c0 100644
> --- a/arch/arm64/include/asm/el2_setup.h
> +++ b/arch/arm64/include/asm/el2_setup.h
> @@ -174,6 +174,13 @@
>  						// to own it.
>  
>  .Lskip_trace_\@:
> +	mrs	x1, id_aa64dfr0_el1
> +	ubfx	x1, x1, #ID_AA64DFR0_EL1_DebugVer_SHIFT, #4
> +	cmp	x1, #ID_AA64DFR0_EL1_DebugVer_V8P9
> +	b.lt	.Lskip_dbg_v8p9_\@

Why do you need to check the id register here?

> +
> +	orr	x2, x2, #MDCR_EL2_EBWE
> +.Lskip_dbg_v8p9_\@:
>  	msr	mdcr_el2, x2			// Configure debug traps
>  .endm
>  
> @@ -438,6 +445,13 @@
>  	orr	x0, x0, #HDFGRTR2_EL2_nPMSDSFR_EL1
>  
>  .Lskip_spefds_\@:
> +	mrs	x1, id_aa64dfr0_el1
> +	ubfx	x1, x1, #ID_AA64DFR0_EL1_DebugVer_SHIFT, #4
> +	cmp	x1, #ID_AA64DFR0_EL1_DebugVer_V8P9
> +	b.lt	.Lskip_dbg_v8p9_\@
> +
> +	mov_q   x0, HDFGWTR2_EL2_nMDSELR_EL1

Doesn't this clobber the trap configuration from the previous blocks?

Will