Linux Documentation
 help / color / mirror / Atom feed
From: Lorenzo Bianconi <lorenzo@kernel.org>
To: Christian Marangi <ansuelsmth@gmail.com>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Simon Horman <horms@kernel.org>, Jonathan Corbet <corbet@lwn.net>,
	Shuah Khan <skhan@linuxfoundation.org>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Russell King <linux@armlinux.org.uk>,
	Saravana Kannan <saravanak@kernel.org>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Nathan Chancellor <nathan@kernel.org>,
	Nick Desaulniers <nick.desaulniers+lkml@gmail.com>,
	Bill Wendling <morbo@google.com>,
	Justin Stitt <justinstitt@google.com>,
	netdev@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org, llvm@lists.linux.dev
Subject: Re: [PATCH net-next v6 12/12] net: airoha: add phylink support
Date: Tue, 9 Jun 2026 17:29:44 +0200	[thread overview]
Message-ID: <aigxaDtZDnI-RTwN@lore-desk> (raw)
In-Reply-To: <20260609151212.29469-13-ansuelsmth@gmail.com>

[-- Attachment #1: Type: text/plain, Size: 9935 bytes --]

> Add phylink support for each GDM port. For GDM1 add the internal interface
> mode as the only supported mode. For GDM2/3/4 add the required
> configuration of the PCS to make the external PHY or attached SFP cage
> work.
> 
> These needs to be defined in the GDM port node using the pcs-handle
> property.
> 
> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

Hi Christian,

some nits inline.

Regards,
Lorenzo

> ---
>  drivers/net/ethernet/airoha/Kconfig       |   1 +
>  drivers/net/ethernet/airoha/airoha_eth.c  | 167 +++++++++++++++++++++-
>  drivers/net/ethernet/airoha/airoha_eth.h  |   3 +
>  drivers/net/ethernet/airoha/airoha_regs.h |  12 ++
>  4 files changed, 181 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/ethernet/airoha/Kconfig b/drivers/net/ethernet/airoha/Kconfig
> index ad3ce501e7a5..38dcc76e5998 100644
> --- a/drivers/net/ethernet/airoha/Kconfig
> +++ b/drivers/net/ethernet/airoha/Kconfig
> @@ -20,6 +20,7 @@ config NET_AIROHA
>  	depends on NET_DSA || !NET_DSA
>  	select NET_AIROHA_NPU
>  	select PAGE_POOL
> +	select PHYLINK
>  	help
>  	  This driver supports the gigabit ethernet MACs in the
>  	  Airoha SoC family.
> diff --git a/drivers/net/ethernet/airoha/airoha_eth.c b/drivers/net/ethernet/airoha/airoha_eth.c
> index 5a8e84fa9918..eabd7b058f82 100644
> --- a/drivers/net/ethernet/airoha/airoha_eth.c
> +++ b/drivers/net/ethernet/airoha/airoha_eth.c
> @@ -8,6 +8,7 @@
>  #include <linux/of_reserved_mem.h>
>  #include <linux/platform_device.h>
>  #include <linux/tcp.h>
> +#include <linux/pcs/pcs.h>

Can you please respect the alphabetic order?

>  #include <linux/u64_stats_sync.h>
>  #include <net/dst_metadata.h>
>  #include <net/page_pool/helpers.h>
> @@ -1779,6 +1780,15 @@ static int airoha_dev_open(struct net_device *netdev)
>  	u32 cur_len, pse_port = FE_PSE_PORT_PPE1;
>  	struct airoha_qdma *qdma = dev->qdma;
>  
> +	err = phylink_of_phy_connect(dev->phylink, netdev->dev.of_node, 0);
> +	if (err) {
> +		netdev_err(netdev, "%s: could not attach PHY: %d\n", __func__,
> +			   err);

Do we need specify the __func__ argument here?

> +		return err;
> +	}
> +
> +	phylink_start(dev->phylink);
> +
>  	netif_tx_start_all_queues(netdev);
>  	err = airoha_set_vip_for_gdm_port(dev, true);
>  	if (err)
> @@ -1876,6 +1886,9 @@ static int airoha_dev_stop(struct net_device *netdev)
>  		}
>  	}
>  
> +	phylink_stop(dev->phylink);
> +	phylink_disconnect_phy(dev->phylink);
> +
>  	return 0;
>  }
>  
> @@ -3148,6 +3161,153 @@ bool airoha_is_valid_gdm_dev(struct airoha_eth *eth,
>  	return false;
>  }
>  
> +/* Nothing to do in MAC, everything is handled in PCS */
> +static void airoha_mac_config(struct phylink_config *config, unsigned int mode,
> +			      const struct phylink_link_state *state)
> +{
> +}
> +
> +static void airoha_mac_link_up(struct phylink_config *config, struct phy_device *phy,
> +			       unsigned int mode, phy_interface_t interface,
> +			       int speed, int duplex, bool tx_pause, bool rx_pause)
> +{
> +	struct airoha_gdm_dev *dev = container_of(config, struct airoha_gdm_dev,
> +						  phylink_config);
> +	struct airoha_gdm_port *port = dev->port;
> +	struct airoha_eth *eth = dev->eth;
> +	u32 frag_size_tx, frag_size_rx;
> +	u32 mask, val;
> +
> +	/* TX/RX frag is configured only for GDM4 */
> +	if (port->id != 4)

	if (port->id != AIROHA_GDM4_IDX)
		...

> +		return;
> +
> +	switch (speed) {
> +	case SPEED_10000:
> +	case SPEED_5000:
> +		frag_size_tx = 8;
> +		frag_size_rx = 8;
> +		break;
> +	case SPEED_2500:
> +		frag_size_tx = 2;
> +		frag_size_rx = 1;
> +		break;
> +	default:
> +		frag_size_tx = 1;
> +		frag_size_rx = 0;
> +	}
> +
> +	/* Configure TX/RX frag based on speed */
> +	if (dev->nbq == 1) {
> +		mask = GDMA4_SGMII1_TX_FRAG_SIZE_MASK;
> +		val = FIELD_PREP(GDMA4_SGMII1_TX_FRAG_SIZE_MASK,
> +				 frag_size_tx);
> +	}  else {
> +		mask = GDMA4_SGMII0_TX_FRAG_SIZE_MASK;
> +		val = FIELD_PREP(GDMA4_SGMII0_TX_FRAG_SIZE_MASK,
> +				 frag_size_tx);
> +	}
> +	airoha_fe_rmw(eth, REG_GDMA4_TMBI_FRAG, mask, val);
> +
> +	if (dev->nbq == 1) {
> +		mask = GDMA4_SGMII1_RX_FRAG_SIZE_MASK;
> +		val = FIELD_PREP(GDMA4_SGMII1_RX_FRAG_SIZE_MASK,
> +				 frag_size_tx);
> +	} else {
> +		mask = GDMA4_SGMII0_RX_FRAG_SIZE_MASK;
> +		val = FIELD_PREP(GDMA4_SGMII0_RX_FRAG_SIZE_MASK,
> +				 frag_size_tx);
> +	}
> +	airoha_fe_rmw(eth, REG_GDMA4_RMBI_FRAG, mask, val);
> +}
> +
> +/* Nothing to do in MAC, everything is handled in PCS */
> +static void airoha_mac_link_down(struct phylink_config *config, unsigned int mode,
> +				 phy_interface_t interface)
> +{
> +}
> +
> +static const struct phylink_mac_ops airoha_phylink_ops = {
> +	.mac_config = airoha_mac_config,
> +	.mac_link_up = airoha_mac_link_up,
> +	.mac_link_down = airoha_mac_link_down,
> +};
> +
> +static int airoha_fill_available_pcs(struct phylink_config *config,
> +				     struct phylink_pcs **available_pcs,
> +				     unsigned int num_available_pcs)
> +{
> +	struct device *dev = config->dev;
> +
> +	return fwnode_phylink_pcs_parse(dev_fwnode(dev), available_pcs,
> +					&num_available_pcs);
> +}
> +
> +static int airoha_setup_phylink(struct net_device *netdev)
> +{
> +	struct airoha_gdm_dev *dev = netdev_priv(netdev);
> +	struct device_node *np = netdev->dev.of_node;
> +	struct airoha_gdm_port *port = dev->port;
> +	struct phylink_config *config;
> +	phy_interface_t phy_mode;
> +	struct phylink *phylink;
> +	int err;
> +
> +	err = of_get_phy_mode(np, &phy_mode);
> +	if (err) {
> +		dev_err(&netdev->dev, "incorrect phy-mode\n");
> +		return err;
> +	}
> +
> +	config = &dev->phylink_config;

remove new-line here.

> +
> +	config->dev = &netdev->dev;
> +	config->type = PHYLINK_NETDEV;
> +	config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |  MAC_10000FD;
> +	if (port->id > AIROHA_GDM1_IDX)

maybe
	if (port->id != AIROHA_GDM1_IDX)
		...

> +		config->mac_capabilities |= MAC_10 | MAC_100 | MAC_1000 |
> +					    MAC_2500FD | MAC_5000FD;
> +
> +	err = fwnode_phylink_pcs_parse(dev_fwnode(&netdev->dev), NULL,
> +				       &config->num_available_pcs);
> +	if (err)
> +		return err;
> +
> +	config->fill_available_pcs = airoha_fill_available_pcs;
> +
> +	/*
> +	 * GDM1 only supports internal for Embedded Switch
> +	 * and doesn't require a PCS.
> +	 */
> +	if (port->id == AIROHA_GDM1_IDX) {
> +		__set_bit(PHY_INTERFACE_MODE_INTERNAL,
> +			  config->supported_interfaces);
> +	} else {
> +		__set_bit(PHY_INTERFACE_MODE_SGMII,
> +			  config->supported_interfaces);
> +		__set_bit(PHY_INTERFACE_MODE_1000BASEX,
> +			  config->supported_interfaces);
> +		__set_bit(PHY_INTERFACE_MODE_2500BASEX,
> +			  config->supported_interfaces);
> +		__set_bit(PHY_INTERFACE_MODE_10GBASER,
> +			  config->supported_interfaces);
> +		__set_bit(PHY_INTERFACE_MODE_USXGMII,
> +			  config->supported_interfaces);
> +
> +		phy_interface_copy(config->pcs_interfaces,
> +				   config->supported_interfaces);
> +	}
> +
> +	phylink = phylink_create(config, of_fwnode_handle(np),
> +				 phy_mode, &airoha_phylink_ops);
> +	if (IS_ERR(phylink))
> +		return PTR_ERR(phylink);
> +
> +	dev->phylink = phylink;
> +
> +	return 0;
> +}
> +
>  static int airoha_alloc_gdm_device(struct airoha_eth *eth,
>  				   struct airoha_gdm_port *port,
>  				   int nbq, struct device_node *np)
> @@ -3210,7 +3370,7 @@ static int airoha_alloc_gdm_device(struct airoha_eth *eth,
>  	dev->nbq = nbq;
>  	port->devs[index] = dev;
>  
> -	return 0;
> +	return airoha_setup_phylink(netdev);
>  }
>  
>  static int airoha_alloc_gdm_port(struct airoha_eth *eth,
> @@ -3435,8 +3595,10 @@ static int airoha_probe(struct platform_device *pdev)
>  				continue;
>  
>  			netdev = netdev_from_priv(dev);
> -			if (netdev->reg_state == NETREG_REGISTERED)
> +			if (netdev->reg_state == NETREG_REGISTERED) {
> +				phylink_destroy(dev->phylink);
>  				unregister_netdev(netdev);
> +			}
>  			of_node_put(netdev->dev.of_node);
>  		}
>  		airoha_metadata_dst_free(port);
> @@ -3472,6 +3634,7 @@ static void airoha_remove(struct platform_device *pdev)
>  				continue;
>  
>  			netdev = netdev_from_priv(dev);
> +			phylink_destroy(dev->phylink);
>  			unregister_netdev(netdev);
>  			of_node_put(netdev->dev.of_node);
>  		}
> diff --git a/drivers/net/ethernet/airoha/airoha_eth.h b/drivers/net/ethernet/airoha/airoha_eth.h
> index 8f42973f9cf5..1b25603dc64d 100644
> --- a/drivers/net/ethernet/airoha/airoha_eth.h
> +++ b/drivers/net/ethernet/airoha/airoha_eth.h
> @@ -554,6 +554,9 @@ struct airoha_gdm_dev {
>  
>  	u32 flags;
>  	int nbq;
> +
> +	struct phylink *phylink;
> +	struct phylink_config phylink_config;
>  };
>  
>  struct airoha_gdm_port {
> diff --git a/drivers/net/ethernet/airoha/airoha_regs.h b/drivers/net/ethernet/airoha/airoha_regs.h
> index 436f3c8779c1..27f2583e143a 100644
> --- a/drivers/net/ethernet/airoha/airoha_regs.h
> +++ b/drivers/net/ethernet/airoha/airoha_regs.h
> @@ -358,6 +358,18 @@
>  #define IP_FRAGMENT_PORT_MASK		GENMASK(8, 5)
>  #define IP_FRAGMENT_NBQ_MASK		GENMASK(4, 0)
>  
> +#define REG_GDMA4_TMBI_FRAG		0x2028
> +#define GDMA4_SGMII1_TX_WEIGHT_MASK	GENMASK(31, 26)
> +#define GDMA4_SGMII1_TX_FRAG_SIZE_MASK	GENMASK(25, 16)
> +#define GDMA4_SGMII0_TX_WEIGHT_MASK	GENMASK(15, 10)
> +#define GDMA4_SGMII0_TX_FRAG_SIZE_MASK	GENMASK(9, 0)
> +
> +#define REG_GDMA4_RMBI_FRAG		0x202c
> +#define GDMA4_SGMII1_RX_WEIGHT_MASK	GENMASK(31, 26)
> +#define GDMA4_SGMII1_RX_FRAG_SIZE_MASK	GENMASK(25, 16)
> +#define GDMA4_SGMII0_RX_WEIGHT_MASK	GENMASK(15, 10)
> +#define GDMA4_SGMII0_RX_FRAG_SIZE_MASK	GENMASK(9, 0)
> +
>  #define REG_MC_VLAN_EN			0x2100
>  #define MC_VLAN_EN_MASK			BIT(0)
>  
> -- 
> 2.53.0
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

      reply	other threads:[~2026-06-09 15:29 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-09 15:11 [PATCH net-next v6 00/12] net: pcs: Introduce support for fwnode PCS Christian Marangi
2026-06-09 15:11 ` [PATCH net-next v6 01/12] net: phylink: keep and use MAC supported_interfaces in phylink struct Christian Marangi
2026-06-09 15:11 ` [PATCH net-next v6 02/12] net: phylink: introduce internal phylink PCS handling Christian Marangi
2026-06-09 15:11 ` [PATCH net-next v6 03/12] net: phylink: add phylink_release_pcs() to externally release a PCS Christian Marangi
2026-06-09 15:12 ` [PATCH net-next v6 04/12] net: pcs: implement Firmware node support for PCS driver Christian Marangi
2026-06-09 15:12 ` [PATCH net-next v6 05/12] net: phylink: support late PCS provider attach Christian Marangi
2026-06-09 15:12 ` [PATCH net-next v6 06/12] net: Document PCS subsystem Christian Marangi
2026-06-09 15:12 ` [PATCH net-next v6 07/12] MAINTAINERS: add myself as PCS subsystem maintainer Christian Marangi
2026-06-09 15:12 ` [PATCH net-next v6 08/12] of: property: fw_devlink: Add support for "pcs-handle" Christian Marangi
2026-06-09 15:12 ` [PATCH net-next v6 09/12] net: phylink: add .pcs_link_down PCS OP Christian Marangi
2026-06-09 15:12 ` [PATCH net-next v6 10/12] dt-bindings: net: pcs: Document support for Airoha Ethernet PCS Christian Marangi
2026-06-09 15:12 ` [PATCH net-next v6 11/12] net: pcs: airoha: add PCS driver for Airoha AN7581 SoC Christian Marangi
2026-06-09 15:12 ` [PATCH net-next v6 12/12] net: airoha: add phylink support Christian Marangi
2026-06-09 15:29   ` Lorenzo Bianconi [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aigxaDtZDnI-RTwN@lore-desk \
    --to=lorenzo@kernel.org \
    --cc=andrew+netdev@lunn.ch \
    --cc=ansuelsmth@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=corbet@lwn.net \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=hkallweit1@gmail.com \
    --cc=horms@kernel.org \
    --cc=justinstitt@google.com \
    --cc=krzk+dt@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux@armlinux.org.uk \
    --cc=llvm@lists.linux.dev \
    --cc=morbo@google.com \
    --cc=nathan@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=nick.desaulniers+lkml@gmail.com \
    --cc=p.zabel@pengutronix.de \
    --cc=pabeni@redhat.com \
    --cc=robh@kernel.org \
    --cc=saravanak@kernel.org \
    --cc=skhan@linuxfoundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox