Re: [PATCH V3 18/20] RISC-V: Add ACPI initialization in setup_arch()

[Conor Dooley <conor@kernel.org>]

[-- Attachment #1: Type: text/plain, Size: 3733 bytes --]

On Fri, Mar 03, 2023 at 07:06:45PM +0530, Sunil V L wrote:
> Initialize the ACPI core for RISC-V during boot.
> 
> ACPI tables and interpreter are initialized based on
> the information passed from the firmware and the value of
> the kernel parameter 'acpi'.
> 
> With ACPI support added for RISC-V, the kernel parameter 'acpi'
> is also supported on RISC-V. Hence, update the documentation.
> 
> Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
> ---

> +static int __init acpi_fadt_sanity_check(void)
> +{
> +	struct acpi_table_header *table;
> +	struct acpi_table_fadt *fadt;
> +	acpi_status status;
> +	int ret = 0;
> +
> +	/*
> +	 * FADT is required on riscv; retrieve it to check its presence
> +	 * and carry out revision and ACPI HW reduced compliancy tests
> +	 */
> +	status = acpi_get_table(ACPI_SIG_FADT, 0, &table);
> +	if (ACPI_FAILURE(status)) {
> +		const char *msg = acpi_format_exception(status);
> +
> +		pr_err("Failed to get FADT table, %s\n", msg);
> +		return -ENODEV;
> +	}
> +
> +	fadt = (struct acpi_table_fadt *)table;
> +
> +	/*
> +	 * Revision in table header is the FADT Major revision, and there
> +	 * is a minor revision of FADT.

What is the point of this part of the comment? Isn't it obvious from the
below code that you expect a major and minor revision?
If feel like you're trying to make a point in it, but the point has been
lost :/

> +	 *
> +	 * TODO: Currently, we check for 6.5 as the minimum version to check
> +	 * for HW_REDUCED flag. However, once RISC-V updates are released in
> +	 * the ACPI spec, we need to update this check for exact minor revision
> +	 */
> +	if (table->revision < 6 || (table->revision == 6 && fadt->minor_revision < 5)) {
> +		pr_err(FW_BUG "Unsupported FADT revision %d.%d, should be 6.5+\n",
> +		       table->revision, fadt->minor_revision);
> +	}
> +
> +	if (!(fadt->flags & ACPI_FADT_HW_REDUCED)) {
> +		pr_err("FADT not ACPI hardware reduced compliant\n");
> +		ret = -EINVAL;
> +	}
> +
> +	/*
> +	 * acpi_get_table() creates FADT table mapping that
> +	 * should be released after parsing and before resuming boot
> +	 */
> +	acpi_put_table(table);
> +	return ret;
> +}

> diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
> index 2d45a416d283..7b2b065a9f70 100644
> --- a/arch/riscv/kernel/setup.c
> +++ b/arch/riscv/kernel/setup.c
> @@ -8,6 +8,7 @@
>   *  Nick Kossifidis <mick@ics.forth.gr>
>   */
>  
> +#include <linux/acpi.h>
>  #include <linux/init.h>
>  #include <linux/mm.h>
>  #include <linux/memblock.h>
> @@ -276,14 +277,22 @@ void __init setup_arch(char **cmdline_p)
>  
>  	efi_init();
>  	paging_init();
> -#if IS_ENABLED(CONFIG_BUILTIN_DTB)
> -	unflatten_and_copy_device_tree();
> -#else
> -	if (early_init_dt_verify(__va(XIP_FIXUP(dtb_early_pa))))
> -		unflatten_device_tree();
> -	else
> -		pr_err("No DTB found in kernel mappings\n");
> -#endif
> +
> +	/* Parse the ACPI tables for possible boot-time configuration */
> +	acpi_boot_table_init();
> +	if (acpi_disabled) {
> +		if (IS_ENABLED(CONFIG_BUILTIN_DTB)) {
> +			unflatten_and_copy_device_tree();
> +		} else {
> +			if (early_init_dt_verify(__va(XIP_FIXUP(dtb_early_pa))))
> +				unflatten_device_tree();
> +			else
> +				pr_err("No DTB found in kernel mappings\n");
> +		}
> +	} else {
> +		early_init_dt_verify(__va(XIP_FIXUP(dtb_early_pa)));
> +	}
> +
>  	early_init_fdt_scan_reserved_mem();
>  	misc_mem_init();

Thanks for removing the ifdeffery :)
Acked-by: Conor Dooley <conor.dooley@microchip.com>

Thanks,
Conor.


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]