[RESEND PATCH v3 0/5] misc: Add Add Synopsys DesignWare xData IP driver

[RESEND PATCH v3 0/5] misc: Add Add Synopsys DesignWare xData IP driver

[Gustavo Pimentel]

This patch series adds a new driver called xData-pcie for the Synopsys
DesignWare PCIe prototype.

The driver configures and enables the Synopsys DesignWare PCIe traffic
generator IP inside of prototype Endpoint which will generate upstream
and downstream PCIe traffic. This allows to quickly test the PCIe link
throughput speed and check is the prototype solution has some limitation
or not.

Changes:
 V2: Rework driver according to Greg Kroah-Hartman feedback
 V3: Fixed issues detected while running on 64 bits platforms
     Rebased patches on top of v5.11-rc1 version

Cc: Derek Kiernan <derek.kiernan@xilinx.com>
Cc: Dragan Cvetic <dragan.cvetic@xilinx.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-pci@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

Gustavo Pimentel (5):
  misc: Add Synopsys DesignWare xData IP driver
  misc: Add Synopsys DesignWare xData IP driver to Makefile
  misc: Add Synopsys DesignWare xData IP driver to Kconfig
  Documentation: misc-devices: Add Documentation for dw-xdata-pcie
    driver
  MAINTAINERS: Add Synopsys xData IP driver maintainer

 Documentation/misc-devices/dw-xdata-pcie.rst |  40 +++
 MAINTAINERS                                  |   7 +
 drivers/misc/Kconfig                         |  11 +
 drivers/misc/Makefile                        |   1 +
 drivers/misc/dw-xdata-pcie.c                 | 379 +++++++++++++++++++++++++++
 5 files changed, 438 insertions(+)
 create mode 100644 Documentation/misc-devices/dw-xdata-pcie.rst
 create mode 100644 drivers/misc/dw-xdata-pcie.c

-- 
2.7.4

[RESEND PATCH v3 4/5] Documentation: misc-devices: Add Documentation for dw-xdata-pcie driver

[Gustavo Pimentel]

Add Documentation for dw-xdata-pcie driver.

Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
---
 Documentation/misc-devices/dw-xdata-pcie.rst | 40 ++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)
 create mode 100644 Documentation/misc-devices/dw-xdata-pcie.rst

diff --git a/Documentation/misc-devices/dw-xdata-pcie.rst b/Documentation/misc-devices/dw-xdata-pcie.rst
new file mode 100644
index 00000000..3af9fad
--- /dev/null
+++ b/Documentation/misc-devices/dw-xdata-pcie.rst
@@ -0,0 +1,40 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===========================================================================
+Driver for Synopsys DesignWare PCIe traffic generator (also known as xData)
+===========================================================================
+
+This driver should be used as a host-side (Root Complex) driver and Synopsys
+DesignWare prototype that includes this IP.
+
+The "dw-xdata-pcie" driver can be used to enable/disable PCIe traffic
+generator in either direction (mutual exclusion) besides allowing the
+PCIe link performance analysis.
+
+The interaction with this driver is done through the module parameter and
+can be changed in runtime. The driver outputs the requested command state
+information to /var/log/kern.log or dmesg.
+
+Request write TLPs traffic generation - Root Complex to Endpoint direction
+- Command:
+	echo 1 > /sys/kernel/dw-xdata-pcie/write
+
+Get write TLPs traffic link throughput
+- Command:
+        cat /sys/kernel/dw-xdata-pcie/write
+- Output example:
+	204 MB/s
+
+Request read TLPs traffic generation - Endpoint to Root Complex direction:
+- Command:
+	echo 1 > /sys/kernel/dw-xdata-pcie/read
+
+Get read TLPs traffic link throughput
+- Command:
+        cat /sys/kernel/dw-xdata-pcie/read
+- Output example:
+	199 MB/s
+
+Request to stop any current TLP transfer:
+- Command:
+	echo 1 > /sys/kernel/dw-xdata-pcie/stop
-- 
2.7.4