* [PATCH 0/2] dt-bindings: hwmon: pmbus: add bindings for isl68137
@ 2024-10-22 19:24 Grant Peltier
2024-10-22 19:25 ` [PATCH 1/2] hwmon: (pmbus/isl68137) add support for voltage divider on Vout Grant Peltier
2024-10-22 19:25 ` [PATCH 2/2] dt-bindings: hwmon: isl68137: add bindings to support voltage dividers Grant Peltier
0 siblings, 2 replies; 5+ messages in thread
From: Grant Peltier @ 2024-10-22 19:24 UTC (permalink / raw)
To: linux, geert+renesas, magnus.damm
Cc: grant.peltier.jg, brandon.howell.jg, linux-hwmon, devicetree,
linux-doc
Renesas digital multiphase voltage regulators are capable of regulating
output voltages that exceed the range that their Vsense pins can detect.
In such applications, users may place a voltage divider between Vout and
the Vsense pin for a given rail. However, the driver currently has no
way of knowing if a voltage divider is being used which results in
erroneous telemetry being reported through hwmon.
This patch set defines a devicetree bindings schema for Renesas digital
multiphase voltage regulators that are supported by the isl68137 driver
to allow users to add voltage divider definitions for any rail powered
by the device. This patch set also includes the required changes to the
isl68137 driver to enable scaling Vout/Pout telemetry for rails with a
defined voltage divider.
Grant Peltier (2):
hwmon: (pmbus/isl68137) add support for voltage divider on Vout
dt-bindings: hwmon: isl68137: add bindings to support voltage dividers
.../hwmon/pmbus/renesas,isl68137.yaml | 133 ++++++++++++
drivers/hwmon/pmbus/isl68137.c | 199 +++++++++++++++++-
2 files changed, 327 insertions(+), 5 deletions(-)
create mode 100644 Documentation/devicetree/bindings/hwmon/pmbus/renesas,isl68137.yaml
--
2.39.5
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 1/2] hwmon: (pmbus/isl68137) add support for voltage divider on Vout
2024-10-22 19:24 [PATCH 0/2] dt-bindings: hwmon: pmbus: add bindings for isl68137 Grant Peltier
@ 2024-10-22 19:25 ` Grant Peltier
2024-10-22 19:25 ` [PATCH 2/2] dt-bindings: hwmon: isl68137: add bindings to support voltage dividers Grant Peltier
1 sibling, 0 replies; 5+ messages in thread
From: Grant Peltier @ 2024-10-22 19:25 UTC (permalink / raw)
To: linux, geert+renesas, magnus.damm
Cc: grant.peltier.jg, brandon.howell.jg, linux-hwmon, devicetree,
linux-doc
Some applications require Vout to be higher than the detectable voltage
range of the Vsense pin for a given rail. In such applications, a voltage
divider may be placed between Vout and the Vsense pin, but this results
in erroneous telemetry being read back from the part. This change adds
support for a voltage divider to be defined in the devicetree for a (or
multiple) specific rail(s) for a supported digital multiphase device and
for the applicable Vout telemetry to be scaled based on the voltage
divider configuration.
Signed-off-by: Grant Peltier <grantpeltier93@gmail.com>
---
drivers/hwmon/pmbus/isl68137.c | 199 ++++++++++++++++++++++++++++++++-
1 file changed, 194 insertions(+), 5 deletions(-)
diff --git a/drivers/hwmon/pmbus/isl68137.c b/drivers/hwmon/pmbus/isl68137.c
index 7e53fb1d5..307eb6847 100644
--- a/drivers/hwmon/pmbus/isl68137.c
+++ b/drivers/hwmon/pmbus/isl68137.c
@@ -13,6 +13,7 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/of.h>
#include <linux/string.h>
#include <linux/sysfs.h>
@@ -20,6 +21,7 @@
#define ISL68137_VOUT_AVS 0x30
#define RAA_DMPVR2_READ_VMON 0xc8
+#define MAX_CHANNELS 4
enum chips {
isl68137,
@@ -72,6 +74,17 @@ enum variants {
raa_dmpvr2_hv,
};
+struct isl68137_channel {
+ u32 vout_voltage_divider[2];
+};
+
+struct isl68137_data {
+ struct pmbus_driver_info info;
+ struct isl68137_channel channel[MAX_CHANNELS];
+};
+
+#define to_isl68137_data(x) container_of(x, struct isl68137_data, info)
+
static const struct i2c_device_id raa_dmpvr_id[];
static ssize_t isl68137_avs_enable_show_page(struct i2c_client *client,
@@ -163,6 +176,8 @@ static const struct attribute_group *isl68137_attribute_groups[] = {
static int raa_dmpvr2_read_word_data(struct i2c_client *client, int page,
int phase, int reg)
{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ const struct isl68137_data *data = to_isl68137_data(info);
int ret;
switch (reg) {
@@ -170,6 +185,25 @@ static int raa_dmpvr2_read_word_data(struct i2c_client *client, int page,
ret = pmbus_read_word_data(client, page, phase,
RAA_DMPVR2_READ_VMON);
break;
+ case PMBUS_READ_POUT:
+ /*
+ * In cases where a voltage divider is attached to the target
+ * rail between Vout and the Vsense pin, both Vout and Pout
+ * should be scaled by the voltage divider scaling factor.
+ * I.e. Vout = Vsense * (R1 + R2) / R2
+ */
+ fallthrough;
+ case PMBUS_READ_VOUT:
+ ret = pmbus_read_word_data(client, page, phase, reg);
+ if (ret > 0 && data->channel[page].vout_voltage_divider[0]
+ && data->channel[page].vout_voltage_divider[1]) {
+ u64 temp = DIV_ROUND_CLOSEST_ULL((u64)ret *
+ (data->channel[page].vout_voltage_divider[0]
+ + data->channel[page].vout_voltage_divider[1]),
+ data->channel[page].vout_voltage_divider[1]);
+ ret = clamp_val(temp, 0, 0xffff);
+ }
+ break;
default:
ret = -ENODATA;
break;
@@ -178,6 +212,50 @@ static int raa_dmpvr2_read_word_data(struct i2c_client *client, int page,
return ret;
}
+static int raa_dmpvr2_write_word_data(struct i2c_client *client, int page,
+ int reg, u16 word)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ const struct isl68137_data *data = to_isl68137_data(info);
+ int ret;
+
+ switch (reg) {
+ case PMBUS_VOUT_MAX:
+ /*
+ * In cases where a voltage divider is attached to the target
+ * rail between Vout and the Vsense pin, Vout related PMBus
+ * commands should be scaled based on the expected voltage
+ * at the Vsense pin.
+ * I.e. Vsense = Vout * R2 / (R1 + R2)
+ */
+ fallthrough;
+ case PMBUS_VOUT_MARGIN_HIGH:
+ fallthrough;
+ case PMBUS_VOUT_MARGIN_LOW:
+ fallthrough;
+ case PMBUS_VOUT_OV_FAULT_LIMIT:
+ fallthrough;
+ case PMBUS_VOUT_UV_FAULT_LIMIT:
+ fallthrough;
+ case PMBUS_VOUT_COMMAND:
+ if (data->channel[page].vout_voltage_divider[0]
+ && data->channel[page].vout_voltage_divider[1]) {
+ u64 temp = DIV_ROUND_CLOSEST_ULL((u64)word *
+ data->channel[page].vout_voltage_divider[1],
+ (data->channel[page].vout_voltage_divider[0] +
+ data->channel[page].vout_voltage_divider[1]));
+ ret = clamp_val(temp, 0, 0xffff);
+ } else {
+ ret = -ENODATA;
+ }
+ break;
+ default:
+ ret = -ENODATA;
+ break;
+ }
+ return ret;
+}
+
static struct pmbus_driver_info raa_dmpvr_info = {
.pages = 3,
.format[PSC_VOLTAGE_IN] = direct,
@@ -220,14 +298,67 @@ static struct pmbus_driver_info raa_dmpvr_info = {
| PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_POUT,
};
+static int isl68137_probe_child_from_dt(struct device *dev,
+ struct device_node *child,
+ struct isl68137_data *data)
+{
+ u32 channel;
+ int err;
+
+ err = of_property_read_u32(child, "reg", &channel);
+ if (err) {
+ dev_err(dev, "missing reg property of %pOFn\n", child);
+ return err;
+ }
+ if (channel >= MAX_CHANNELS) {
+ dev_err(dev, "invalid reg %d of %pOFn\n", channel, child);
+ return -EINVAL;
+ }
+
+ of_property_read_u32_array(child, "vout-voltage-divider",
+ data->channel[channel].vout_voltage_divider,
+ ARRAY_SIZE(data->channel[channel].vout_voltage_divider));
+
+ return 0;
+}
+
+static int isl68137_probe_from_dt(struct device *dev,
+ struct isl68137_data *data)
+{
+ const struct device_node *np = dev->of_node;
+ struct device_node *child;
+ int err;
+
+ for_each_child_of_node(np, child) {
+ if (strcmp(child->name, "channel"))
+ continue;
+
+ err = isl68137_probe_child_from_dt(dev, child, data);
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
+
static int isl68137_probe(struct i2c_client *client)
{
+ struct device *dev = &client->dev;
struct pmbus_driver_info *info;
+ struct isl68137_data *data;
+ int i, err;
- info = devm_kzalloc(&client->dev, sizeof(*info), GFP_KERNEL);
- if (!info)
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
return -ENOMEM;
- memcpy(info, &raa_dmpvr_info, sizeof(*info));
+
+ for (i = 0; i < MAX_CHANNELS; i++)
+ memset(data->channel[i].vout_voltage_divider,
+ 0,
+ sizeof(data->channel[i].vout_voltage_divider));
+
+ memcpy(&data->info, &raa_dmpvr_info, sizeof(data->info));
+ info = &data->info;
switch (i2c_match_id(raa_dmpvr_id, client)->driver_data) {
case raa_dmpvr1_2rail:
@@ -242,6 +373,7 @@ static int isl68137_probe(struct i2c_client *client)
case raa_dmpvr2_1rail:
info->pages = 1;
info->read_word_data = raa_dmpvr2_read_word_data;
+ info->write_word_data = raa_dmpvr2_write_word_data;
break;
case raa_dmpvr2_2rail_nontc:
info->func[0] &= ~PMBUS_HAVE_TEMP3;
@@ -250,9 +382,11 @@ static int isl68137_probe(struct i2c_client *client)
case raa_dmpvr2_2rail:
info->pages = 2;
info->read_word_data = raa_dmpvr2_read_word_data;
+ info->write_word_data = raa_dmpvr2_write_word_data;
break;
case raa_dmpvr2_3rail:
info->read_word_data = raa_dmpvr2_read_word_data;
+ info->write_word_data = raa_dmpvr2_write_word_data;
break;
case raa_dmpvr2_hv:
info->pages = 1;
@@ -263,11 +397,18 @@ static int isl68137_probe(struct i2c_client *client)
info->m[PSC_POWER] = 2;
info->R[PSC_POWER] = -1;
info->read_word_data = raa_dmpvr2_read_word_data;
+ info->write_word_data = raa_dmpvr2_write_word_data;
break;
default:
return -ENODEV;
}
+ if (dev->of_node) {
+ err = isl68137_probe_from_dt(dev, data);
+ if (err)
+ return err;
+ }
+
return pmbus_do_probe(client, info);
}
@@ -318,11 +459,59 @@ static const struct i2c_device_id raa_dmpvr_id[] = {
MODULE_DEVICE_TABLE(i2c, raa_dmpvr_id);
+static const struct of_device_id isl68137_of_match[] = {
+ { .compatible = "renesas,isl68137", .data = (void *)raa_dmpvr1_2rail },
+ { .compatible = "renesas,isl68220", .data = (void *)raa_dmpvr2_2rail },
+ { .compatible = "renesas,isl68221", .data = (void *)raa_dmpvr2_3rail },
+ { .compatible = "renesas,isl68222", .data = (void *)raa_dmpvr2_2rail },
+ { .compatible = "renesas,isl68223", .data = (void *)raa_dmpvr2_2rail },
+ { .compatible = "renesas,isl68224", .data = (void *)raa_dmpvr2_3rail },
+ { .compatible = "renesas,isl68225", .data = (void *)raa_dmpvr2_2rail },
+ { .compatible = "renesas,isl68226", .data = (void *)raa_dmpvr2_3rail },
+ { .compatible = "renesas,isl68227", .data = (void *)raa_dmpvr2_1rail },
+ { .compatible = "renesas,isl68229", .data = (void *)raa_dmpvr2_3rail },
+ { .compatible = "renesas,isl68233", .data = (void *)raa_dmpvr2_2rail },
+ { .compatible = "renesas,isl68239", .data = (void *)raa_dmpvr2_3rail },
+
+ { .compatible = "renesas,isl69222", .data = (void *)raa_dmpvr2_2rail },
+ { .compatible = "renesas,isl69223", .data = (void *)raa_dmpvr2_3rail },
+ { .compatible = "renesas,isl69224", .data = (void *)raa_dmpvr2_2rail },
+ { .compatible = "renesas,isl69225", .data = (void *)raa_dmpvr2_2rail },
+ { .compatible = "renesas,isl69227", .data = (void *)raa_dmpvr2_3rail },
+ { .compatible = "renesas,isl69228", .data = (void *)raa_dmpvr2_3rail },
+ { .compatible = "renesas,isl69234", .data = (void *)raa_dmpvr2_2rail },
+ { .compatible = "renesas,isl69236", .data = (void *)raa_dmpvr2_2rail },
+ { .compatible = "renesas,isl69239", .data = (void *)raa_dmpvr2_3rail },
+ { .compatible = "renesas,isl69242", .data = (void *)raa_dmpvr2_2rail },
+ { .compatible = "renesas,isl69243", .data = (void *)raa_dmpvr2_1rail },
+ { .compatible = "renesas,isl69247", .data = (void *)raa_dmpvr2_2rail },
+ { .compatible = "renesas,isl69248", .data = (void *)raa_dmpvr2_2rail },
+ { .compatible = "renesas,isl69254", .data = (void *)raa_dmpvr2_2rail },
+ { .compatible = "renesas,isl69255", .data = (void *)raa_dmpvr2_2rail },
+ { .compatible = "renesas,isl69256", .data = (void *)raa_dmpvr2_2rail },
+ { .compatible = "renesas,isl69259", .data = (void *)raa_dmpvr2_2rail },
+ { .compatible = "renesas,isl69260", .data = (void *)raa_dmpvr2_2rail },
+ { .compatible = "renesas,isl69268", .data = (void *)raa_dmpvr2_2rail },
+ { .compatible = "renesas,isl69269", .data = (void *)raa_dmpvr2_3rail },
+ { .compatible = "renesas,isl69298", .data = (void *)raa_dmpvr2_2rail },
+
+ { .compatible = "renesas,raa228000", .data = (void *)raa_dmpvr2_hv },
+ { .compatible = "renesas,raa228004", .data = (void *)raa_dmpvr2_hv },
+ { .compatible = "renesas,raa228006", .data = (void *)raa_dmpvr2_hv },
+ { .compatible = "renesas,raa228228", .data = (void *)raa_dmpvr2_2rail_nontc },
+ { .compatible = "renesas,raa229001", .data = (void *)raa_dmpvr2_2rail },
+ { .compatible = "renesas,raa229004", .data = (void *)raa_dmpvr2_2rail },
+ { },
+};
+
+MODULE_DEVICE_TABLE(of, isl68137_of_match);
+
/* This is the driver that will be inserted */
static struct i2c_driver isl68137_driver = {
.driver = {
- .name = "isl68137",
- },
+ .name = "isl68137",
+ .of_match_table = isl68137_of_match,
+ },
.probe = isl68137_probe,
.id_table = raa_dmpvr_id,
};
--
2.39.5
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH 2/2] dt-bindings: hwmon: isl68137: add bindings to support voltage dividers
2024-10-22 19:24 [PATCH 0/2] dt-bindings: hwmon: pmbus: add bindings for isl68137 Grant Peltier
2024-10-22 19:25 ` [PATCH 1/2] hwmon: (pmbus/isl68137) add support for voltage divider on Vout Grant Peltier
@ 2024-10-22 19:25 ` Grant Peltier
2024-10-22 20:27 ` Rob Herring (Arm)
2024-10-22 20:51 ` Rob Herring
1 sibling, 2 replies; 5+ messages in thread
From: Grant Peltier @ 2024-10-22 19:25 UTC (permalink / raw)
To: linux, geert+renesas, magnus.damm
Cc: grant.peltier.jg, brandon.howell.jg, linux-hwmon, devicetree,
linux-doc
Add devicetree bindings to support declaring optional voltage dividers to
the rail outputs of supported digital multiphase regulators. Some
applications require Vout to exceed the voltage range that the Vsense pin
can detect. This binding definition allows users to define the
characteristics of a voltage divider placed between Vout and the Vsense
pin for any rail powered by the device.
Signed-off-by: Grant Peltier <grantpeltier93@gmail.com>
---
.../hwmon/pmbus/renesas,isl68137.yaml | 133 ++++++++++++++++++
1 file changed, 133 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/pmbus/renesas,isl68137.yaml
diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/renesas,isl68137.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/renesas,isl68137.yaml
new file mode 100644
index 000000000..12004da53
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/pmbus/renesas,isl68137.yaml
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/pmbus/renesas,isl68137.yaml
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Digital Multiphase Voltage Regulators with PMBus
+
+maintainers:
+ - Grant Peltier <grant.peltier.jg@renesas.com>
+
+description:
+ Renesas digital multiphase voltage regulators with PMBus.
+
+ https://www.renesas.com/en/products/power-management/multiphase-power/multiphase-dcdc-switching-controllers
+
+properties:
+ compatible:
+ enum:
+ - renesas,isl68137
+ - renesas,isl68137
+ - renesas,isl68220
+ - renesas,isl68221
+ - renesas,isl68222
+ - renesas,isl68223
+ - renesas,isl68224
+ - renesas,isl68225
+ - renesas,isl68226
+ - renesas,isl68227
+ - renesas,isl68229
+ - renesas,isl68233
+ - renesas,isl68239
+ - renesas,isl69222
+ - renesas,isl69223
+ - renesas,isl69224
+ - renesas,isl69225
+ - renesas,isl69227
+ - renesas,isl69228
+ - renesas,isl69234
+ - renesas,isl69236
+ - renesas,isl69239
+ - renesas,isl69242
+ - renesas,isl69243
+ - renesas,isl69247
+ - renesas,isl69248
+ - renesas,isl69254
+ - renesas,isl69255
+ - renesas,isl69256
+ - renesas,isl69259
+ - renesas,isl69260
+ - renesas,isl69268
+ - renesas,isl69269
+ - renesas,isl69298
+ - renesas,raa228000
+ - renesas,raa228004
+ - renesas,raa228006
+ - renesas,raa228228
+ - renesas,raa229001
+ - renesas,raa229004
+
+ reg:
+ maxItems: 1
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+patternProperties:
+ "^channel@([0-3])$":
+ type: object
+ description: |
+ Represents
+
+ properties:
+ reg:
+ description: |
+ The channel (rail) index.
+ items:
+ minimum: 0
+ maximum: 3
+
+ vout-voltage-divider:
+ description: |
+ Resistances of a voltage divider placed between Vout and the voltage
+ sense pin for the given channel (rail). It has two numbers
+ representing the resistances of the voltage divider provided as
+ <R1 R2> which yields an adjusted Vout as
+ Vout_adj = Vout * (R1 + R2) / R2 given the original Vout as reported
+ by the Vsense pin.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 2
+ maxItems: 2
+
+ required:
+ - reg
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ isl68239@60 {
+ compatible = "renesas,isl68239";
+ reg = <0x60>;
+ };
+ };
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ isl68239@60 {
+ compatible = "renesas,isl68239";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ reg = <0>;
+ vout-voltage-divider = <1000 1000>; // Reported Vout/Pout would be scaled by 2
+ };
+ };
+ };
--
2.39.5
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH 2/2] dt-bindings: hwmon: isl68137: add bindings to support voltage dividers
2024-10-22 19:25 ` [PATCH 2/2] dt-bindings: hwmon: isl68137: add bindings to support voltage dividers Grant Peltier
@ 2024-10-22 20:27 ` Rob Herring (Arm)
2024-10-22 20:51 ` Rob Herring
1 sibling, 0 replies; 5+ messages in thread
From: Rob Herring (Arm) @ 2024-10-22 20:27 UTC (permalink / raw)
To: Grant Peltier
Cc: brandon.howell.jg, linux, linux-doc, devicetree, grant.peltier.jg,
magnus.damm, geert+renesas, linux-hwmon
On Tue, 22 Oct 2024 14:25:39 -0500, Grant Peltier wrote:
> Add devicetree bindings to support declaring optional voltage dividers to
> the rail outputs of supported digital multiphase regulators. Some
> applications require Vout to exceed the voltage range that the Vsense pin
> can detect. This binding definition allows users to define the
> characteristics of a voltage divider placed between Vout and the Vsense
> pin for any rail powered by the device.
>
> Signed-off-by: Grant Peltier <grantpeltier93@gmail.com>
> ---
> .../hwmon/pmbus/renesas,isl68137.yaml | 133 ++++++++++++++++++
> 1 file changed, 133 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/hwmon/pmbus/renesas,isl68137.yaml
>
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/hwmon/pmbus/renesas,isl68137.yaml: properties:compatible:enum: ['renesas,isl68137', 'renesas,isl68137', 'renesas,isl68220', 'renesas,isl68221', 'renesas,isl68222', 'renesas,isl68223', 'renesas,isl68224', 'renesas,isl68225', 'renesas,isl68226', 'renesas,isl68227', 'renesas,isl68229', 'renesas,isl68233', 'renesas,isl68239', 'renesas,isl69222', 'renesas,isl69223', 'renesas,isl69224', 'renesas,isl69225', 'renesas,isl69227', 'renesas,isl69228', 'renesas,isl69234', 'renesas,isl69236', 'renesas,isl69239', 'renesas,isl69242', 'renesas,isl69243', 'renesas,isl69247', 'renesas,isl69248', 'renesas,isl69254', 'renesas,isl69255', 'renesas,isl69256', 'renesas,isl69259', 'renesas,isl69260', 'renesas,isl69268', 'renesas,isl69269', 'renesas,isl69298', 'renesas,raa228000', 'renesas,raa228004', 'renesas,raa228006', 'renesas,raa228228', 'renesas,raa229001', 'renesas,raa229004'] has non-unique elements
hint: "enum" must be an array of either integers or strings
from schema $id: http://devicetree.org/meta-schemas/keywords.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/hwmon/pmbus/renesas,isl68137.yaml: $id: 'http://devicetree.org/schemas/hwmon/pmbus/renesas,isl68137.yaml' does not match 'http://devicetree.org/schemas/.*\\.yaml#'
from schema $id: http://devicetree.org/meta-schemas/base.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/hwmon/pmbus/renesas,isl68137.yaml: ^channel@([0-3])$: Missing additionalProperties/unevaluatedProperties constraint
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/858d8af3ae9d15b62e36dc3deb50275f9c9869b0.1729622189.git.grantpeltier93@gmail.com
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 2/2] dt-bindings: hwmon: isl68137: add bindings to support voltage dividers
2024-10-22 19:25 ` [PATCH 2/2] dt-bindings: hwmon: isl68137: add bindings to support voltage dividers Grant Peltier
2024-10-22 20:27 ` Rob Herring (Arm)
@ 2024-10-22 20:51 ` Rob Herring
1 sibling, 0 replies; 5+ messages in thread
From: Rob Herring @ 2024-10-22 20:51 UTC (permalink / raw)
To: Grant Peltier
Cc: linux, geert+renesas, magnus.damm, grant.peltier.jg,
brandon.howell.jg, linux-hwmon, devicetree, linux-doc
On Tue, Oct 22, 2024 at 02:25:39PM -0500, Grant Peltier wrote:
> Add devicetree bindings to support declaring optional voltage dividers to
> the rail outputs of supported digital multiphase regulators. Some
> applications require Vout to exceed the voltage range that the Vsense pin
> can detect. This binding definition allows users to define the
> characteristics of a voltage divider placed between Vout and the Vsense
> pin for any rail powered by the device.
>
> Signed-off-by: Grant Peltier <grantpeltier93@gmail.com>
> ---
> .../hwmon/pmbus/renesas,isl68137.yaml | 133 ++++++++++++++++++
> 1 file changed, 133 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/hwmon/pmbus/renesas,isl68137.yaml
>
> diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/renesas,isl68137.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/renesas,isl68137.yaml
> new file mode 100644
> index 000000000..12004da53
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/pmbus/renesas,isl68137.yaml
> @@ -0,0 +1,133 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +
> +$id: http://devicetree.org/schemas/hwmon/pmbus/renesas,isl68137.yaml
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Renesas Digital Multiphase Voltage Regulators with PMBus
> +
> +maintainers:
> + - Grant Peltier <grant.peltier.jg@renesas.com>
> +
> +description:
You need '>' to preserve paragraphs.
> + Renesas digital multiphase voltage regulators with PMBus.
> +
> + https://www.renesas.com/en/products/power-management/multiphase-power/multiphase-dcdc-switching-controllers
> +
> +properties:
> + compatible:
> + enum:
> + - renesas,isl68137
> + - renesas,isl68137
> + - renesas,isl68220
> + - renesas,isl68221
> + - renesas,isl68222
> + - renesas,isl68223
> + - renesas,isl68224
> + - renesas,isl68225
> + - renesas,isl68226
> + - renesas,isl68227
> + - renesas,isl68229
> + - renesas,isl68233
> + - renesas,isl68239
> + - renesas,isl69222
> + - renesas,isl69223
> + - renesas,isl69224
> + - renesas,isl69225
> + - renesas,isl69227
> + - renesas,isl69228
> + - renesas,isl69234
> + - renesas,isl69236
> + - renesas,isl69239
> + - renesas,isl69242
> + - renesas,isl69243
> + - renesas,isl69247
> + - renesas,isl69248
> + - renesas,isl69254
> + - renesas,isl69255
> + - renesas,isl69256
> + - renesas,isl69259
> + - renesas,isl69260
> + - renesas,isl69268
> + - renesas,isl69269
> + - renesas,isl69298
> + - renesas,raa228000
> + - renesas,raa228004
> + - renesas,raa228006
> + - renesas,raa228228
> + - renesas,raa229001
> + - renesas,raa229004
> +
> + reg:
> + maxItems: 1
> +
> + '#address-cells':
> + const: 1
> +
> + '#size-cells':
> + const: 0
> +
> +patternProperties:
> + "^channel@([0-3])$":
> + type: object
> + description: |
> + Represents
???
> +
> + properties:
> + reg:
> + description: |
Don't need '|' if there's no formatting.
> + The channel (rail) index.
> + items:
> + minimum: 0
> + maximum: 3
> +
> + vout-voltage-divider:
Needs a vendor prefix.
> + description: |
> + Resistances of a voltage divider placed between Vout and the voltage
> + sense pin for the given channel (rail). It has two numbers
> + representing the resistances of the voltage divider provided as
> + <R1 R2> which yields an adjusted Vout as
> + Vout_adj = Vout * (R1 + R2) / R2 given the original Vout as reported
> + by the Vsense pin.
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> + minItems: 2
> + maxItems: 2
> +
> + required:
> + - reg
> +
> +required:
> + - compatible
> + - reg
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + isl68239@60 {
> + compatible = "renesas,isl68239";
> + reg = <0x60>;
> + };
> + };
> + - |
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + isl68239@60 {
> + compatible = "renesas,isl68239";
> + reg = <0x60>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + channel@0 {
> + reg = <0>;
> + vout-voltage-divider = <1000 1000>; // Reported Vout/Pout would be scaled by 2
> + };
> + };
> + };
> --
> 2.39.5
>
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2024-10-22 20:51 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-10-22 19:24 [PATCH 0/2] dt-bindings: hwmon: pmbus: add bindings for isl68137 Grant Peltier
2024-10-22 19:25 ` [PATCH 1/2] hwmon: (pmbus/isl68137) add support for voltage divider on Vout Grant Peltier
2024-10-22 19:25 ` [PATCH 2/2] dt-bindings: hwmon: isl68137: add bindings to support voltage dividers Grant Peltier
2024-10-22 20:27 ` Rob Herring (Arm)
2024-10-22 20:51 ` Rob Herring
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).