From: Grant Peltier <grantpeltier93@gmail.com>
To: robh@kernel.org, linux@roeck-us.net, geert+renesas@glider.be,
magnus.damm@gmail.com
Cc: grant.peltier.jg@renesas.com, brandon.howell.jg@renesas.com,
linux-hwmon@vger.kernel.org, devicetree@vger.kernel.org,
linux-doc@vger.kernel.org
Subject: [PATCH v7 0/2] dt-bindings: hwmon: pmbus: add bindings for isl68137
Date: Tue, 12 Nov 2024 14:07:44 -0600 [thread overview]
Message-ID: <cover.1731439797.git.grantpeltier93@gmail.com> (raw)
Renesas digital multiphase voltage regulators are capable of regulating
output voltages that exceed the range that their Vsense pins can detect.
In such applications, users may place a voltage divider between Vout and
the Vsense pin for a given rail. However, the driver currently has no
way of knowing if a voltage divider is being used which results in
erroneous telemetry being reported over hwmon.
This patch set defines a devicetree bindings schema for Renesas digital
multiphase voltage regulators that are supported by the isl68137 driver
to allow users to add voltage divider definitions for any rail powered
by the device. This patch set also includes the required changes to the
isl68137 driver to enable scaling Vout/Pout telemetry for rails with a
defined voltage divider.
v7:
- Port existing device bindings from trivial-bindings.yaml
- Rename new bindings file to isil,isl68137.yaml to match pre-existing
bindings
- Style fixes for issues reported by checkpatch --strict
v6:
- Amend patch commit messages to explain why the vout-voltage-divider
property was copied from the max20730 instead of using the iio
voltage-divider property
v5:
- Fix clang compilation errors related to C23 syntax
v4:
- Revert devicetree property name to "vout-voltage-divider" and refactor
property description and driver implementation to match existing
vout-voltage-divider implementation in max20730 as no suitable generic
voltage divider schema exists.
- Minor fixes based on Guenter's review of v2.
- Initialize voltage dividers for all channels to defaults that simplify
logic in PMBus word read/write functions.
v3:
- Report and return errors reading the vout-voltage-divider property from
the devicetree when the property is defined
- Change u64 division/rounding operations to use explicit math64 macros
v2:
- Fix devicetree bindings schema errors
- Add "renesas," vendor prefix to "vout-voltage-divider" property
- Rebase patch series on v6.12-rc1
Grant Peltier (2):
hwmon: (pmbus/isl68137) add support for voltage divider on Vout
dt-bindings: hwmon: isl68137: add bindings to support voltage dividers
.../bindings/hwmon/pmbus/isil,isl68137.yaml | 148 ++++++++++++
.../devicetree/bindings/trivial-devices.yaml | 6 -
drivers/hwmon/pmbus/isl68137.c | 210 +++++++++++++++++-
3 files changed, 353 insertions(+), 11 deletions(-)
create mode 100644 Documentation/devicetree/bindings/hwmon/pmbus/isil,isl68137.yaml
--
2.39.5
next reply other threads:[~2024-11-12 20:07 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-12 20:07 Grant Peltier [this message]
2024-11-12 20:09 ` [PATCH v7 1/2] hwmon: (pmbus/isl68137) add support for voltage divider on Vout Grant Peltier
2024-11-13 20:08 ` Guenter Roeck
2024-11-12 20:10 ` [PATCH v7 2/2] dt-bindings: hwmon: isl68137: add bindings to support voltage dividers Grant Peltier
2024-11-13 18:14 ` Rob Herring (Arm)
2024-11-13 20:07 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1731439797.git.grantpeltier93@gmail.com \
--to=grantpeltier93@gmail.com \
--cc=brandon.howell.jg@renesas.com \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=grant.peltier.jg@renesas.com \
--cc=linux-doc@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=magnus.damm@gmail.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).